Backup and Restore of DQS (Data Quality Service SQL 2012) Databases

We are currently using DPM 2010 running on Server 2008 R2 as our backup solution. We will soon be leveraging the Data Quality Services in SQL 2012 along with the Master Data Service.
In the SQL 2012 documentation from Microsoft it states, “The backup and restore operations of the DQS databases must be synchronized.”
Otherwise the restored Data Quality Server will not be functional. Currently I believe that DPM will run serialized backups of databases from one SQL server.
I was hoping someone could point me towards some documentation for backing up DQS with DPM.
Is anybody currently doing this? If so have you been successful restoring?

LogicalName cant be same for mdf and ldf. verify again with FILELISTONLY. Also you have put wrong logical name
MOVE N'OriginalDB' TO N'D:\sql data\TargetDB.mdf'
Please paste the output of
RESTORE FILELISTONLY FROM DISK = 'D:\backup.bak'

Similar Messages

Backup and Restore of Redis Data

My usage of Azure Redis is a cache to store snapshots of data for an event sourced system. We have millions of events stored in persistent storage that are aggregated and saved to redis. This provides us with fast access to the current state of an entity.
However, to rebuild the Redis cache from scratch would take many hours as the number of events in the system is huge and constantly growing.
How in Azure Redis can we backup and restore data in case of failure? For instance, it would be nice to have access to an rdb file and archive it then restore when needed. We tried setting a non-Azure Redis as a slave of our Azure Redis however this does
not work as it seems the Azure Redis doesn't have write access to it's working directory preventing it from writing an rdb file for sync.
What are the recommended approaches to using Azure Redis as persistent storage? How can we backup/restore or even move data from one redis to another.
Thanks!
Drew
Drew Schaeffer

Thanks for the response Mike. The interesting thing is on Saturday this didnt work. Today it looks like it is sync'ing succesfully. Below is the steps and output i saw on Saturday. I started it again today and it looks good so far. I will let it finish the
sync and see what happens now. The redis is about 19gb on a Standard Pricing Tier.
On the non-Azure Redis
1. SET CONFIG masterauth <mykey>
2. SLAVEOF myredis.redis.cache.windows.net 6379
Then on my non-Azure Redis I see the following output. This ouput repeats until i kill the non-azure redis or set SLAVEOF NO ONE.
[3468] 17 Jan 20:27:28.152 # Server started, Redis version 2.8.17
[3468] 17 Jan 20:27:28.153 * The server is now ready to accept connections on port 6379
[3468] 17 Jan 20:27:58.517 * SLAVE OF myredis.redis.cache.windows.net:6379 enabled (user request)
[3468] 17 Jan 20:27:59.294 * Connecting to MASTER myredis.redis.cache.windows.net:6379
[3468] 17 Jan 20:27:59.318 * MASTER <-> SLAVE sync started
[3468] 17 Jan 20:27:59.322 * Non blocking connect for SYNC fired the event.
[3468] 17 Jan 20:27:59.336 * Master replied to PING, replication can continue...
[3468] 17 Jan 20:27:59.345 * Partial resynchronization not possible (no cached master)
[3468] 17 Jan 20:27:59.348 * Full resync from master: ea5954fa6dcd0073585177b26c72f3e228309c2b:49968344771
[3468] 17 Jan 20:28:23.207 # syncRead returned 0
[3468] 17 Jan 20:28:23.208 # I/O error reading bulk count from MASTER: Resource temporarily unavailable
Drew Schaeffer

How to backup and restore alien formatted data from/to a CF card - just binary data, not mountable

I'm trying to make a safety backup of data from a Compact Flash card and be able to restore this data to the CF card again in the event of disaster.
The data on the CF is in a non-standard filesystem format - I just want to make a 'bit-for-bit' copy of the data on the CF to a backup of some sort held on the Mac and be able to put it back on the CF again if need be.
I connect the CF card to the Mac using a USB type external adapter box.
I have tried using Disk Utility. I made a ".dmg" Disk Image from the CF apparently OK, but it will not restore the image back to the CF. I get message "Restore failure. Could not validate source - device not configured". I've not managed to find any
After much fruitless digging it's in danger of turning into a second career trying to sort out how to do this - so a cry for help...

Thanks jsd2 - that did help with one part of the puzzle - how to find what the 'dev' was to use in the 'dd' command! When I listed the /dev dir I couldn't see clearly what was what, and could feel a load more googling coming on, but this tool made it clear the CF I wanted was identified as '...disk2'.
I'm trying "dd-ing" a .bin file I extracted from the .dmg backup onto the CF using the dd-GUI tool - but it is very slow, currently indicating another 4 hours to finish the write! I'm not sure the best way to abort.
I wonder if it could be made to go faster if I used the actual dd command from the console, with the right parameters.
Unfortunately I'm also not convinced that the ".bin" format will be any good - it was a choice between that and ".img" so I tossed a coin, for the sake of trying something.
I think it is more likely to work if I used the 'dd' command (via the tool or from the command line) in both directions, ie. to make the copy and then to copy it back - that way presumably the raw byte format should be consistently packaged in each direction at least - but if it takes >4 hours each way with this 32GB CF card then it's not bearable!

Exchange Server 2013 backup and restoration question

Good afternoon
I am wondering if I can pick people's brains here if that's not too much trouble.
I have recently implemented an Exchange 2013 environment with 3 servers (two multi-role CAS & MBX physical machines, and one further virtual CAS server). Everything is working correctly and mail-flow is fine. My question relates to backup and restoration
procedures. I am running a single Database Availability group with the two multi-role servers members of the this group and I have one Mailbox Database on the DAG, passive on one member and active on the other. Failover has been tested and this is functioning
as expected.
The backup environment I have implemented is as follows. I have utilized a separate Microsoft DPM 2012 server that runs a nightly Bare Metal backup on both multi-role servers with a retention range of 14 days and I have protected the DAG using DPM with a
nightly full-express backup and 4 hourly syncs on one of the multi-role servers. Furthermore the Mailbox Database is protected, again nightly with a copy-backup.
I am confident I know what to do should the mailbox database become corrupted or lost or need to be restored for one reason or another (it would just be a case of restoring the backed up mailbox database using DPM to a pre-created recovery database), what
I am not quite so sure on is what I would do should I lose one or both of the multi-role CAS and MBX servers (the third CAS I am not so worried about as it is not used for incoming mail flow from the internet and we really only use it for ECP as we did not
want to expose this to the internet). I wonder what process should follow to restore my Exchange servers (I know how to perform the Bare Metal recoveries using WSB) and what configuration would be required after restoring the Bare Metal backups.
I know this is a reasonably long question but if anyone has any advice for me I would appreciate it greatly in the unlikely event something goes horribly wrong with my Exchange environment.
Thanks in advance

Hi,
Yes, Most of the configuration settings are stored in AD. Mail data and personal related data are store in Mailbox DB. We just need to take consideration of these two points.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Grant permission - backup and restore

Hello Everyone,
Please help. I would like to give permission for the domain user to a particular database in SQL Server 2014 so that it can perform backup and restore it. User should take SQL Management Studio (local) to perform backup and restore.
My user is granted the following roles: dbcreator, public, sysadmin (I know it is weak), and has privileges on the SQL Server backup directory. What should be improved?
Thank you for your help.

>> I would like to give permission for the domain user to a particular database
You can't control the permission level once the user granted higher permission in security hierarchy.
Backup
BACKUP DATABASE and BACKUP LOG permissions default to members of the sysadmin fixed
server role and the db_owner and db_backupoperator fixed
database roles.
https://msdn.microsoft.com/en-us/library/ms186865.aspx
Restore
https://msdn.microsoft.com/en-us/library/ms186858.aspx
If the database being restored does not exist, the user must have CREATE DATABASE permissions to be able to execute RESTORE.
If the database exists, RESTORE permissions default to members of the sysadmin and dbcreator fixed
server roles and the owner (dbo)
of the database (for the FROM DATABASE_SNAPSHOT option, the database always exists).
--Prashanth

I recently did a backup and restore on my Iphone 4 because I was switching carriers. When i switched carriers i went back to I tunes to restore all that iI backed up I can't get any of my pics back contacts or anything. is there a way to recover the data?

I recently did a backup and restore on my Iphone4 because iI was going to switch carriers. When I switched carriers I went back to I tunes to restore my backup and nothing was there .Some how I lost all of my data, is there a way I can retrive my data or not? I had all of my pics and contacts on the backup. please help..

When you say nothing was there, do you mean the backup wasn't there?

Ideas for Providing User Level Data Backup and Restore

I'm looking for ideas for implementing a user level application data backup and restore in an Apex app.
What would be great is to have a user be provided an export file and a way to import this file. A bit overkill but hopefully never needed.
Another option that is perfectly doable is a report that simply provides a means to create an export of the data. Since I already have an interface I can use an export to interface an export.
Any thoughts?
Hopefully I'm missing something already there for an end user to use.

jlincoln wrote:
"Do you mean "export" and "import" colloquially, or in the specific sense of the exp/imp/datapump utilities?"': I mean as in imp/exp Oracle utilities. Generally speaking, it would be neat to be able to export and import via an Apex an application. In this hosted environment I don't have that access but would this be a bad idea if you don't care about the existing data in the schema in which the data resides?I can envisage a mechanism using <tt>exp/imp</tt>, but since it requires <tt>dbms_scheduler</tt> external jobs and access to the file system it's highly unlikely to be possible in a hosted environment. (Unless you're doing the hosting?)
Backup: Necessary for piece of mind and flexibility. I am working on a VB/Access user who does this today to get to the point when they can be comfortable with the backups occurring regularly and by the hosting site's DBA group.
Restore: Like I said. I am working on a VB/Access user who does this today to get to the point when they can be comfortable with the backups occurring regularly and by the hosting site's DBA group. This is a very small data set. A restore would simply remove existing data and replace it with the new data.My opinion is that time would be better spent working on the user rather than a redundant backup and restore feature. Involve them in a disaster recovery exercise with whoever is hosting the environment to prove that their data is safe. Normally the inclusion of data in regular, effective database backups is sold as a major feature of APEX solutions.
"What about security/privacy when this data ends up in uncontrolled environments?": I don't understand the point of this question. The data should not end up in uncontrolled environments. Just like the data in the database or its backups.Again, having data in a central, shared location protected by multiple levels of application, database, and OS security is usually seen as a plus for APEX over VB/Access. Exporting the data in toto to a PC/laptop that can be stolen or lost, and where it can be copied to USB drives/phones/email loses this protection.
User Level: Because the end user must have access to the backup and restore mechanisms of the application.
Application Data: The application data. Less than 10MB. Very small. It can be exported in a flat file downloaded by the end user. This file can then be used to upload and import via an existing application interface. For example.
"I'm struggling to parse this for meaning.": When I say I have an existing interface I am referring to a program residing in the Apex application that will take data from a flat table structure (i.e. interface table), validate the data, derive data, and load into the target table structure.Other than the report export capability linked to above, there's nothing built-in to APEX that comes close to your requirement. If the data is simple enough that it can be handled in such a report, and you have a process that can read and recreate this export, then you have your backup/restore capability. If the data can't be handled in a simple report, then you'll need a more complex PL/SQL process to generate the file.

I had a backup of my data in android 4.0, I degraded it to version 2.3, Now I want to restore it, but I do not find the backup and restore option in Version 2.3.

I had a backup of my data in android 4.0, I degraded it to version 2.3, Now I want to restore it, but I do not find the backup and restore option in Version 2.3. Help....
the backup file is named .semc-fullbackup

As far as I know, there was no backup application in the early release of Android 2.3 for Xperia U. I'm moving this thread to Android development. Hopefully got get some good advice there.
What are your thoughts about this forum? Let us know by doing this short survey.

DATA BACKUPS AND RESTORE IN ANOTHER COMPUTER

I have two machinem Main Machine and Backup Machine.
How i make backup from Main Machine and restore on Backup Machine
Any body has an idena please help out me
Thanks in Advance
Rgds
TeeJay

Dear Sudhir
I prepared Backup machine in the same way but registry i not try
because the version or oracle is different in this senerio main server is 8.0.5
backup is 10g
when i update backup server through export file the export command inserting data again in table this command is not replacing to the table after import my table showing duplicate data.
Therefore i am asking any other way of backup and restore.
I am try throug rman now if i get any good result i send to you or if you have any idea about rman write me back please.
Thanks for your reply and
Thanks in advance
Rgds
TeeJay

Data Quality Services Installer script - Where is the 64 bit version

Hi.
I have Microsoft SQL Server 2012 - 11.0.2218.0 Enterprise Edition on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (WOW64) installed on my laptop. The Data Quality Services feature has been installed. When I try and run the DQS client it says I
must run the DQS installer script. I therefore run the Data Quality Server Installer, which is the other option in the DQS menu, and it errors saying 'You are running 32-bit version of DQS installer on 64-bit OS'. I've looked for the 64-bit version but I can't
find it. Any ideas where I can get it from?
Thanks in advance for any help.

iTunes 64bit version for Windows is somewhere in the future. Nice to see Apple is obviously doing something to remedy the issue.

The Data Quality Services license validation has failed.

Hello
Am Harsha here, Am getting some strange error on my MSSQL Server 2012 DataQualityServices, I have installed DQSinstaller and everything is working properly till yesterday, But today after i restart the Machine am not able to open DQS client its giving some
strange error like "The Data Quality Services license validation has failed." Please see the Screen shot below. Please let me know how to rectify this Issue.

After patching, the dqsinstaller.exe should be run to regenerate the SQL CLR procedures to refresh the version. Try this...
Launch Cmd as Administrator
cd "C:\Program Files\Microsoft SQL Server\MSSQL11.InstanceName\MSSQL\Binn"
DQSInstaller.exe -upgradedlls
Thanks, Jason
Didn't get enough help here? Submit a case with the Microsoft Customer Support team for deeper investigation - http://support.microsoft.com/select/default.aspx?target=assistance

Data Quality Services

Hi All,
I have utilized the DQS for my organization Data Cleansing project. And we have built Data Quality reports using DQ output.
We also use Profiler Summary report in the Activity Monitor, but this is manual process where Data owners need to manually enter into the Activity monitor and generet the porofiler report.
My question is, which DQS table store the this Profiler summary report where by I can automate the report through that source.
Here is the screenshot of the report we are looking at, we need to find out which DQS source table got this information.
Thanks for the help

0
Hi All,
I have utilized the DQS for my organization Data Cleansing project. And we have built Data Quality reports using DQ output.
We also use Profiler Summary report in the Activity Monitor, but this is manual process where Data owners need to manually enter into the Activity monitor and generet the porofiler report.
My question is, which DQS table store the this Profiler summary report where by I can automate the report through that source.
Here is the screenshot of the report we are looking at, we need to find out which DQS source table got this information.
Thanks for the help

Data Quality Services - Summary report

Hi,
Is anyone has a idea about which table is stored summary information comming out from Activity monitor?
the example is below:
when I exported the data the summary as follows:
My pourpose is to automate this report if it is stored on DQS data bases?
Field
Domain
Corrected Values
Suggested Values
Completeness
Accuracy
EmployeeName
EmpName
5 (0.06%)
0 (0%)
7303 (88.73%)
8222 (99.89%)
EmployeeKey
EmployeeKey
1 (0.01%)
0 (0%)
8231 (100%)
8215 (99.81%)
CostCentreKey
CostCentreKey
0 (0%)
0 (0%)
8231 (100%)
8141 (98.91%)
CostGroupKey
CostCentreGroupKey
0 (0%)
0 (0%)
7188 (87.33%)
7094 (86.19%)
LeaveGroupKey
LeaveGroupKey
0 (0%)
0 (0%)
8231 (100%)
8129 (98.76%)
EmployeeStatusKey
EmployeeStatusKey
0 (0%)
0 (0%)
8231 (100%)
8212 (99.77%)
EmployeePositionNumber
EmployeePositionNumber
0 (0%)
0 (0%)
8214 (99.79%)
8117 (98.61%)
EmployeeEmail
EmployeeEmail
0 (0%)
0 (0%)
5133 (62.36%)
8220 (99.87%)
HoursPerWeek
HoursPerWeek
0 (0%)
0 (0%)
8214 (99.79%)
8213 (99.78%)
Gender
Gender
0 (0%)
0 (0%)
8231 (100%)
8231 (100%)
EmployeeEFT
EmployeeEFT
0 (0%)
0 (0%)
8214 (99.79%)
8213 (99.78%)
EmployeePostCode
EmployeePostCode
0 (0%)
0 (0%)
8153 (99.05%)
8124 (98.7%)
EmployeeSuburb
EmployeeSuburb
133 (1.62%)
0 (0%)
8152 (99.04%)
8134 (98.82%)
ReportToManager
ReportToManager
0 (0%)
0 (0%)
7037 (85.49%)
7036 (85.48%)
PositionClassificationCode
PositionClassificationCode
0 (0%)
0 (0%)
8144 (98.94%)
8144 (98.94%)
PositionClassificationDesc
PositionClassificationDesc
0 (0%)
0 (0%)
8144 (98.94%)
8144 (98.94%)
PositionLocation
PositionLocation
0 (0%)
0 (0%)
8214 (99.79%)
8122 (98.68%)
Age
Age
0 (0%)
0 (0%)
8231 (100%)
8229 (99.98%)
CurrentClassCode
CurrentClassCode
0 (0%)
0 (0%)
7908 (96.08%)
7906 (96.05%)
CurrentCLassDescription
CurrentCLassDescription
0 (0%)
0 (0%)
7908 (96.08%)
7907 (96.06%)
EmpState
EmpState
0 (0%)
0 (0%)
8153 (99.05%)
8137 (98.86%)

0
Hi All,
I have utilized the DQS for my organization Data Cleansing project. And we have built Data Quality reports using DQ output.
We also use Profiler Summary report in the Activity Monitor, but this is manual process where Data owners need to manually enter into the Activity monitor and generet the porofiler report.
My question is, which DQS table store the this Profiler summary report where by I can automate the report through that source.
Here is the screenshot of the report we are looking at, we need to find out which DQS source table got this information.
Thanks for the help

2013 Backup and Restore

When I go to my backup and Restore and check the job status it tells me there is a backup in progress:
A backup or restore is currently in progress
How do I reset this as there is no backup that I have run for some time?

Hi,
According to your post, my understanding is that the job status still shown “A
backup or restore is currently in progress”.
Did you delete a old search application and recreate a new one before?
If so, maybe the old object is still existing in SQL, you can used the following stsadm command:
Stsadm -o deleteconfigurationobject -id “object GUID”
To find the object GUID, simply go into Central Admin - Manage Service Applications and highlight the offending legacy service application (Search Service
Application in the case). You should now be able to see the GUID in the IE address bar. Run the command above, and try your backups again and all should be well.
For more information:
http://imperfectit.blogspot.com/2010/06/sharepoint-2010-farm-backup-fails.html
There is a similar thread for your reference.
http://social.technet.microsoft.com/Forums/en-US/0310b061-ea1c-4576-bb74-a02f5e04a3a0/backup-job-stuck-in-process-in-backup-and-restore-job-status?forum=sharepointadminprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

Backup and Restore of DQS (Data Quality Service SQL 2012) Databases

Similar Messages

Maybe you are looking for