Backup exchange 2010 done, unloading medium... but never finish

Hi all,
I'm using Data Protector 07.00 to backup exchange 2010 (with DAG), everything was fine but then exchange full backup has done DP unloading medium then never finish, other jobs will be backed up normal except the exchange will be failed on next start. I can't also abort/cancel the device after the DP unloading medium.
please help me to solve.
thanks,

Hi,
Apologies for digging up this relatively old post but I am getting the same error message as the OP, however the solution is irrelevant / doesn't work and I can't fathom it out.
We have six Help Desk operatives - members of "Help Desk" and "View Only" RBAC. All Help Desk operatives  connect to a terminal server (2008 R2) where EMC and EMS is
installed. The EMC works fine for all HD operatives, apart from one. When this operator clicks on anything under "Recipient Configuration" he gets the error described herein. It was fuly working until around early January 2014.
We don't see any event log errors on the Terminal Server or on Exchange 2010 pertaining to this fault.
Although he connectes to a terminal server, it is a one-off used for Exchange management only. It only uses local profiles. I have completely wiped his profile and seen the system build a new
profile for him. As a test,
I added him to "Organisation Management" RBAC group and the issue went away - he was able to enumerate all users, when removed from "Organisation Management" and the problem returns.
When clicking on Recipient Configuration --> Mailbox, I see the PS cmdlet run is:
Get-Recipient -PropertySet ConsoleLargeSet -ResultSize '1000' -SortBy DisplayName -RecipientType 'UserMailbox'
He can connect to EMS and run this cmdlet without issue.
I am at a loss as to where to go from here. Every Google results in checking the paths mentioned in KB2027063 (which are correct) or installing / reinstalling WinRM Extensions for IIS, which
are fine, otherwise the issue would affect all users.
Any help would be gratefully received
Many thanks
W.

Similar Messages

  • I am trying to back up my iPhone to a previous date so I do t lose all my pictures, contacts, apps ect. I have done this before but never had this much trouble. Is this something I'm going to b able to do an restore all my things bag to my phone

    I had to reset my iPhone because forgotten pass code, I am trying to back up my iPhone to a previous date so I do t lose all my pictures, contacts, apps ect. I have done this before but never had this much trouble. Is this something I'm going to b able to do an restore all my things bag to my phone

    What problem are you having when attempting to restore?
    Are you using iCloud or iTunes to restore?
    Have you looked through this?
    http://support.apple.com/kb/ht1766

  • Windows Server backup Exchange 2010

    Anybody has an idea how to perform a backup of a  single database of Exchange 2010 using windows server backup. I don't really want to backup the whole server.

    Please look at this informative resource that clarifies your concern in depth :
    Backing Up Exchange 2010 using Windows Server Backup

  • Exchange 2010 Email not Syncing, but Contacts and Calendar do???

    Anyone have any feedback on this? I have tried deleting and readding my Exchange 2010 account several times and same result.
    No emails are displaying at all. However, all of my contacts are appearing in the contacts app and so are calendar entries. Also, when I go into the settings and choose which folders to have push email, I see a list of all of my exchange folders, so I know it is seeing the server.
    Any idea why the emails are not appearing? I have tried all combinations of different settings and can't get them to appear.
    Thanks

    Are either of you part of protected groups in active directory/exchange? Such as the built ins. i.e Domain Admin/Account Operator etc?

  • Fetching but never finishing while trying to rebuild

    have tried to tried to rebuild my mailbox (mailbox was getting populated with multiple duplicate emails), but now, as I run "activity" it's fetching my mail--some 14000 messages, but it's getting hung up around half way through.
    and then just starting over.
    consequently, there are now NO emails in my inbox. help! how do I make sure the emails I'm trying to recover aren;t lost?
    and why the incessant loop of fetching, never finishing, and then repeating the cycle?
    mail-less in Dallas

    Audrey:
    Welcome to the Apple Discussions. You can useiPhoto Library Manager to easily open both of the two libraries on your HD to see if there is duplication or if there are some photos that are not in your primary (located in the Pictures folder) library. If there are some you need to get into the primary library the paid version of iPLM will let you copy rolls or albums between the two libraries and maintain the keywords and comments as shown here.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • I am trying to download foxfire on a Mac. I have tried several times. It shows downloading in progress but never finishes.

    Trying to download foxfire on a Mac. It begins but goes for hours and never finishes.

    You may need to consult a Safari forum for your download problems.
    Possibly consider as a work around downloading from another device and transferring on removable media or by wifi/bluetooth etc to your Mac. (Take care to obtain the correct Firefox installer, the one for a Mac and not the one for the downloading device).
    The Firefox related advice on downloads is:
    *[[Find and manage downloaded files]]
    *[[What to do if you can't download or save files]]

  • When I download the process starts but never finishes the download

    Downloads start but never complete.  I have an Intel with 10.6.8 operating system

    Disable your firewall/security software and try again.

  • My ibooks are not syncing with my iPad. Many are simply stuck in a "downloading" status, but never finish.

    MY iBooks are not properly synching with my iPad. Many of the books are stuck in a "downloading" status. But they never finish and are not added to my library. I have tried resetting the iPad and it is running the latest release of iOS.
    Thank you!
    John

    Hi Just Sign out of itunes then sign back in Also Settings itunes & apps store, make sure automatic downloads, are on. Cheers Brian

  • When trying to "e-mail link" gmail starts to load but never finishes.

    when I try to send a link Gmail starts to load and then gmail never finishes loading. I leaves the gmail loading box up with the blue line about 80% full and then it just stops. It does this on 2 pc's and one laptop that I use.
    5

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • TS2529 i had backed up my iphone5 today an went to the apple store to get a replacement an came home an now the itunes didnt ask to restore the new one like the old phone was setup. i have done this befor but never itunes not wanting to restore my saved s

    also to note when i hooked up the new phone to the laptop... itunes showed two.... iphone5s under the devices tap   but when i go to hit the retore tap it dont restore like my old phone was.. plz help

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • Message start but never finish

    Hi guys,
    I have installed PI 7.0 was 5 months ago, that always running without problem, but today have occured one error.
    Error:
    When the PI send a xml for receiver agrement (comunication channel) the message stay always executing and never stop.
    In SMQ2 tcode, the message are executing for hours, hours, hours and not stop.
    The message appears em sxmb_moni (abap) but not appears in rwb (java)
    Can anybody help me, please ?

    Hi Joao,
    If this is the case you dont need to worry. This is your java function problem . There is some condition in your java function that is never satisfied and goes into infinite loop. Plz check that condition or make sure that this condition is satisfied.
    If you want you can check by removing the Java function and then checking in smq1/smq2 there wont be any entries in running status.
    Hope this solves your problem.
    Thanks!

  • Firefox tries to upgrade but never finishes

    I'm running 7.0.1 and Firefox detects an update but though the update bar loads, the upgrade never completes.

    Hi bogdan.victoria,
    You should take a look at the Knowledge Base article [[Updating Firefox]]. There is a lot of good information in there and some troubleshooting steps as well.
    If that doesn't work, you might want to try installing a fresh copy of Firefox:
    http://www.mozilla.org/firefox/new/
    I would suggest that you first back up your personal information and bookmarks, just in case. You can find details in the article [[Backing up your information]].
    Hopefully this helps!

  • CD burning states ".....finishing" but never finishes

    Running 7.0.2
    iTunes did this starting with 7.0.1.
    When I burn a playlist, once the CD is almost completed, there is a message that states something about finishing (not sure of exact verbage).
    I've left iTunes up for over an hour with this message displaying and it still doesn't finish, and then once I move the mouse, my WHOLE SYSTEM LOCKS UP!!!!!
    I've been using iTunes for several years and NEVER HAVE I BEEN SO DISAPOINTED AS I'VE BEEN WITH RELEASE 7.x!!!!!
    C'mon Apple, get your act together and if you're going to change something, make it better not worse......

    Uninstalled iTunes, Quicktime, and any iPod Updater stuff per instructions.
    Got rid of the never ending message of "Burning disk....finishing" but my system is still locking up.
    Only thing that works is the mouse movement. Clicking on anything produces no results.
    Must turn off machine to restart Windows.
    Running Windows XP Pro
    All services packs and critical updates are installed.
    CD diagnostics are:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    VIA Technologies, Inc. KM400-8235
    iTunes 7.0.2.16
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.1
    LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (6.2.0.110),
    UpperFilters: Cdralw2k (6.2.0.110), pwd_2k (6.2.0.110), GEARAspiWDM (2.0.6.1),
    Video Driver: VIA/S3G KM400/KN400\S3G KM400/KN400 Adapter
    IDE\DiskWDCWD800JB-00CRA1_____________________17.07W17, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomLITE-ONLTR-52327S______________________QS03___, Bus Type ATA, Bus Address [1,0]
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    D: LITE-ON LTR-52327S, Rev QS03
    Audio CD in drive.
    Found 14 songs on CD, playing time 54:03 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:44:13
    Track 3, start time 07:21:38
    Track 4, start time 10:45:61
    Track 5, start time 13:54:16
    Track 6, start time 17:02:58
    Track 7, start time 21:07:19
    Track 8, start time 26:35:65
    Track 9, start time 30:40:10
    Track 10, start time 34:28:65
    Track 11, start time 38:06:44
    Track 12, start time 42:32:74
    Track 13, start time 46:09:03
    Track 14, start time 50:00:26
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 10 12 16 24 32 40 48 52.
    The drive CDRW speeds are: 4 8.
    Writing CD text is turned on in the preferences. If you're having problems burning CDs, try turning this preference off.
    The last failed MP3 CD burn had error code -128(0xffffff80). It happened on drive D: LITE-ON LTR-52327S on CDR media at speed 0X.

  • Firefox just updated and now when I try to look at the pictures that have been downloaded it starts loading a welcome site, but never finishes. I do not know what is going on.

    I have some pictures that were downloaded from some emails. I was on AOL thru Firefox, when there was an upgrade. Allowed the upgrade & restarted. When I went back thru Firefox onto Yahoo.com to my mail site and then opened pictures it started going to somewhere that starts with: http://us.mc1801.mail.yahoo.com/mc/welcome?.partner
    It just keeps circling a green arrow like it is trying to load but nothing happens. I have tried several restarts and it does the same thing. As I type this the green arrow is still working. Do I need to call AOL support or what? Thanks Alice

    hello cornea1, try to disable "encrypted connection scanning" within kaspersky's settings > additional > network.

  • I'm on a mac 10.4.11 i keep getting update messages for FF 3.6.18 i click update and it just keeps downloading but never finishes no matter how long i let it run. ???

    this has happened at least 4-5 times. i have always in the past been able to update with no issues

    about:crashes only lists crashes that you have reported using the [[Mozilla Crash Reporter]] which comes up after a crash. Because there are so many possible reasons for a crash, getting the crash ID really helps volunteers find the cause quicker.
    That doesn't mean we can't help without a crash id. :-) No crashes here, but I'm also on Snow Leopard and using Firefox 3.6.6.
    Are you using Firefox 3.6.6? The most common cause of crashes on Mac is the Flash plugin. Are you using the latest version of Flash? You can check at http://www.mozilla.com/en-US/plugincheck/
    Do you remember any specific circumstances about when the crash occurred? What sites you were on?

Maybe you are looking for