Backup Exec Information.

This may be of interest to users of Backup Exec Ralus:- Backup exec Ralus does not work of SLES11 SP3. Found this after the upgrade from SP2. I know this is the wrong forum, but should OES go to the next level service patch:- be warned.

Originally Posted by thsundel
I didn't see that in the release notes, do you have a link to where they state support for SLES11SP3?
Thomas
http://www.symantec.com/business/sup...&id=TECH212772
Like I said it work with SLES11 Sp3, but I didn't try with OES11 Sp2. And they didn't write in the notes that it is supporter.
Personally I'd rather use a backup solution that is supported.
Well we need money to change a backup solution! ;-)

Similar Messages

  • Windows 2008 r2 windows installer issue error 1719 when install Backup exec 12.5

    Hi all
    After a epic weekend of rebuilding our exchange server I have tried to reinstall Backup exec 12.5 64bit, this was installed with no issues during the last build, however at the end of this build I went to reinstall Backup Exec 12.5 and it is failing with
    error 1719 Windows installer issue.
    I have looked on many sites and tried many things non of them have worked, has anyone managed to resolve this issue.
    Dave
    DJH

    Hi Lenora
    See below
    Symantec Backup Exec (TM) 12.5 for Windows Servers Installation Log
    03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe
    03-19-2013,17:33:38 : CSetupApp::GetInstalledGUID
    03-19-2013,17:33:38 : CSetupApp::LoadSetupXML
    03-19-2013,17:33:38 : CSetupApp::ScanXML
    03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\Setup.xml
    03-19-2013,17:33:38 : MSI File Name = WindowsInstaller-KB893803-v2-x86.exe
    03-19-2013,17:33:38 : MSI Version = 3.1
    03-19-2013,17:33:38 : MSI Package Name = Symantec Backup Exec for Windows Servers.msi
    03-19-2013,17:33:38 : System Central Processor = 64
    03-19-2013,17:33:38 : Product Type = SETUP_BEX64
    03-19-2013,17:33:38 : Product Name = Symantec Backup Exec for Windows Servers
    03-19-2013,17:33:38 : Current Installing GUID ={BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:33:38 : Product Version = 12.5
    03-19-2013,17:33:38 : CSetupSupport::IsValidMSIPackage
    03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Symantec Backup Exec for Windows Servers.msi
    03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:33:38 : Equal PID
    03-19-2013,17:33:38 : Product version: 12.5.2213
    03-19-2013,17:33:38 : StartBESequence
    03-19-2013,17:33:38 : Executing BE_PreCheckInstall
    03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:33:38 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,17:33:38 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:33:38 : Executing StartBESequence
    03-19-2013,17:33:38 : Pulling user data from the MSI
    03-19-2013,17:33:38 : Upgrade state set to 0
    03-19-2013,17:33:38 : Executing SSO::PullDataMSI()
    03-19-2013,17:33:38 : Executing CDlgCAS::PullDataMSI()
    03-19-2013,17:33:38 : MSI processing complete
    03-19-2013,17:33:38 : Pulling user data from the command line
    03-19-2013,17:33:38 : COMMAND LINE: Checking UIMODE value
    03-19-2013,17:33:38 : COMMAND LINE: Checking for program group placement value
    03-19-2013,17:33:38 : COMMAND LINE: Checking for main feature selection
    03-19-2013,17:33:38 : COMMAND LINE: Checking for serialization values
    03-19-2013,17:33:38 : CDlgChooseCustom::PullDataSilent
    03-19-2013,17:33:38 : After check for parameter file exists.
    03-19-2013,17:33:38 : CDlgLocalChooseCustom::Pass
    03-19-2013,17:33:38 : After Check for INSTALL_CHOICE.
    03-19-2013,17:33:38 : After Check for INSTALL_TYPE.
    03-19-2013,17:33:38 : After Check for INSTALL_MODE.
    03-19-2013,17:33:38 : CDlgLocalChooseCustom Pass Function end.
    03-19-2013,17:33:38 : Agent for Microsoft Exchange Server was added for evaluation
    03-19-2013,17:33:38 : Agent for Microsoft SQL Server was added for evaluation
    03-19-2013,17:33:38 : Ignoring the TSM switch.
    03-19-2013,17:33:38 : COMMAND LINE: Checking for service account values
    03-19-2013,17:33:38 : Not in Maintenance mode
    03-19-2013,17:33:38 : Getting the Silent Params.
    03-19-2013,17:33:38 : COMMAND LINE: checking for SSO values
    03-19-2013,17:33:38 : COMMAND LINE: checking for DlgChooseDBServer values
    03-19-2013,17:33:38 : COMMAND LINE: Checking for tape drivers values
    03-19-2013,17:33:38 : COMMAND LINE: Checking for TSM values
    03-19-2013,17:33:38 : COMMAND LINE: checking for CASO values
    03-19-2013,17:33:38 : COMMAND LINE: Checking for clone values
    03-19-2013,17:33:38 : COMMAND LINE: Checking progress settings
    03-19-2013,17:33:38 : COMMAND LINE: Checking for NOINSTALL value
    03-19-2013,17:33:38 : Setup Command Line = "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe"
    03-19-2013,17:33:38 : List of switches set follows:
    03-19-2013,17:33:38 : /DEST: = C:\Program Files\Symantec1\Backup Exec\
    03-19-2013,17:33:38 : /SNO: = 0930292112010690
    03-19-2013,17:33:38 : /USER: = backup
    03-19-2013,17:33:38 : /DOM: = ACCENTPRESS
    03-19-2013,17:33:38 : /PASS: = ********
    03-19-2013,17:33:38 : /TS:
    03-19-2013,17:33:38 : /TD: = ALL
    03-19-2013,17:33:38 : /DOCS:
    03-19-2013,17:33:38 : /LOADER:
    03-19-2013,17:33:38 : /AOFO:
    03-19-2013,17:33:38 : /EXCH:
    03-19-2013,17:33:38 : /SQL:
    03-19-2013,17:33:38 : /NTA:
    03-19-2013,17:33:38 : /RAULUS:
    03-19-2013,17:33:38 : /DBSERVER:
    03-19-2013,17:33:38 : /DBINSTPATH: = C:\Program Files\Microsoft SQL Server\BE\
    03-19-2013,17:33:38 : /BACKUPDATA: = 0
    03-19-2013,17:33:38 : /MAC:
    03-19-2013,17:33:38 : Command line processing complete
    03-19-2013,17:33:38 : Install set to run in UI mode
    03-19-2013,17:33:38 : CDlgPushWelcome::Pass
    03-19-2013,17:33:40 : CinstOpenDlg::ValidateData
    03-19-2013,17:33:43 : Validating license data
    03-19-2013,17:33:44 : CDlgChooseInstall::ValidateData
    03-19-2013,17:33:44 : CDlgValidationSummary::LaunchValidationTest
    03-19-2013,17:33:44 : m_bUseNativeClient = 1
    03-19-2013,17:33:44 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:33:44 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:33:44 : Connected to SQL Server.
    03-19-2013,17:33:44 : m_bUseNativeClient = 1
    03-19-2013,17:34:05 : CDlgValidationSummary::ValidateData
    03-19-2013,17:34:05 : BEOperations::BE_GetInstalledProdCodeVersion
    03-19-2013,17:34:05 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:34:05 : CDlgSerialNumber Pass Function.
    03-19-2013,17:34:05 : After Check for Remote_Install.
    03-19-2013,17:34:05 : After Check for RA_INSTALL.
    03-19-2013,17:34:07 : Validating serialization data
    03-19-2013,17:34:07 : CDlgLocalChooseCustom::Pass
    03-19-2013,17:34:07 : After Check for INSTALL_CHOICE.
    03-19-2013,17:34:07 : After Check for INSTALL_TYPE.
    03-19-2013,17:34:07 : After Check for INSTALL_MODE.
    03-19-2013,17:34:07 : CDlgLocalChooseCustom Pass Function end.
    03-19-2013,17:34:07 : On Init of CDlgChooseCustom
    03-19-2013,17:34:07 : Leaving Init of CDlgChooseCustom
    03-19-2013,17:34:07 : CDlgLocalChooseCustom::OnInitDialog
    03-19-2013,17:34:07 : On Init of CDlgLocalChooseCustom
    03-19-2013,17:34:07 : Leaving Init of CDlgLocalChooseCustom
    03-19-2013,17:34:12 : Validating Local Options Data
    03-19-2013,17:34:13 : Validating service account data
    03-19-2013,17:34:13 : CDlgSSO Pass Function.
    03-19-2013,17:34:13 : After Check for INSTALL_MODE.
    03-19-2013,17:34:13 : DlgChooseDBServer Pass Function.
    03-19-2013,17:34:20 : m_bUseNativeClient = 1
    03-19-2013,17:34:20 : Validating DlgChooseDBServer data
    03-19-2013,17:34:20 : Drive C:     Required: 1102 MB     Available: 37138 MB
    03-19-2013,17:34:20 : CDlgChooseTapeDrivers Pass Function.
    03-19-2013,17:34:20 : After Check for INSTALL_MODE.
    03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
    03-19-2013,17:34:20 : After Check for INSTALL_TYPE.
    03-19-2013,17:34:20 : CDlgSerialNumber Pass Function.
    03-19-2013,17:34:20 : CDlgCAS Pass Function.
    03-19-2013,17:34:20 : After Check for INSTALL_MODE.
    03-19-2013,17:34:20 : CDlgClone Pass Function.
    03-19-2013,17:34:20 : CDlgClone not passed.
    03-19-2013,17:34:20 : CDlgRemoteChooseCustom Pass Function.
    03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
    03-19-2013,17:34:20 : Install Summary XML File:
    03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.xml
    03-19-2013,17:34:20 : Install Summary XSL File:
    03-19-2013,17:34:20 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\InstallSummary.xsl
    03-19-2013,17:34:20 : Install Summary HTML File:
    03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.htm
    03-19-2013,17:34:20 : Not Quickstart Edition
    03-19-2013,17:34:20 : Entering GetSQLAndCASOInformation
    03-19-2013,17:34:20 : Leaving GetSQLAndCASOInformation
    03-19-2013,17:34:20 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:34:20 : m_bUseNativeClient = 1
    03-19-2013,17:34:20 : *************** About Backing Up Exchange 2007 Servers *************** To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this
    computer.  The Management Tools can be installed during a custom install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft
    Exchange Server MAPI Client and Collaboration Data Objects package version 06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,17:34:21 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:34:27 : Executing InstallLiveUpdate.
    03-19-2013,17:34:40 : Installing .Net Framework 2.0 SP1.
    03-19-2013,17:34:40 : Checking for .Net Framework 2.0 SP1.
    03-19-2013,17:34:40 : Vista or Longhorn server.  Not installing .NET Frameworks.
    03-19-2013,17:34:40 : .NET Framework was detected.  Skipping install.
    03-19-2013,17:34:41 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,17:34:41 : m_bUseNativeClient = 1
    03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes;DATABASE=master
    03-19-2013,17:34:41 : SQL Server version 9
    03-19-2013,17:34:41 : SQL version returned:  9
    03-19-2013,17:34:41 : Executing SQL_GetServicePack.
    03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:34:41 : Connected to SQL Server.
    03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:34:41 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:34:41 : Connected to SQL Server.
    03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Express Edition
    03-19-2013,17:34:41 : "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\SQLExpress\SQLEXPR.exe" /wait /qn /norestart /lv "C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt" INSTANCENAME=BKUPEXEC SQLACCOUNT="NT AUTHORITY\SYSTEM" SQLPASSWORD=""
    UPGRADE=SQL_Engine,SQL_Data_Files,SQL_Replication,Client_Components,Connectivity SAPWD=**** DISABLENETWORKPROTOCOLS=0
    03-19-2013,17:34:45 : V-225-53:  ERROR: Failed to install SQL Express BKUPEXEC instance with error 1601.  ***To search for information about this error, click
    here
    03-19-2013,17:34:45 : Please review C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt for more details.
    03-19-2013,17:34:45 : Failed to install third party products.
    03-19-2013,17:37:25 : Validating install complete
    03-19-2013,17:37:25 : Success unloading BEINSTDLGS.DLL.
    03-19-2013,17:37:25 : CLEANUP: Install has removed the following files from: C:\Users\ADMINI~1\AppData\Local\Temp\1\{BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:37:25 : Removed files:
    03-19-2013,17:37:25 : ERROR:  Installation failed with error 1603.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,17:41:16 : Windows Operating System Version: 6.1
    03-19-2013,17:41:16 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,17:41:18 : Executing managed _Setup:
    03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,17:41:18 : Loading XML from:
    03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,17:41:18 : RawsDlgSequence::CheckInstMode
    03-19-2013,17:41:18 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,17:41:19 : Launching UI Install
    03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:41:19 : m_bUseNativeClient = 1
    03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:41:20 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,17:41:20 : CopySupportFiles
    03-19-2013,17:41:20 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,17:41:20 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:41:20 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,17:41:20 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,17:41:28 : Typical install value is set to : True
    03-19-2013,17:41:29 : m_bUseNativeClient = 1
    03-19-2013,17:41:29 : Executing SQL_GetServicePack.
    03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:41:29 : Connected to SQL Server.
    03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:41:29 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:41:29 : Connected to SQL Server.
    03-19-2013,17:41:29 : Executing SQL_GetServicePack.
    03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:41:29 : Connected to SQL Server.
    03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:41:29 : m_bUseNativeClient = 1
    03-19-2013,17:41:51 : m_bUseNativeClient = 1
    03-19-2013,17:41:51 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:43:04 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,17:43:04 : Install is not executing as the service account.
    03-19-2013,17:43:04 : Successfully Logged on as service account.
    03-19-2013,17:43:04 : Successfully impersonated service account.
    03-19-2013,17:43:04 : EUserName value successfully written to the registry.
    03-19-2013,17:43:04 : EPassword value successfully written to the registry.
    03-19-2013,17:43:04 : EDomain value successfully written to the registry.
    03-19-2013,17:43:09 : There were no remote computers selected for install
    03-19-2013,17:43:09 : m_bUseNativeClient = 1
    03-19-2013,17:43:09 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,17:43:10 : Terminal Services enabled.
    03-19-2013,17:43:10 : Terminal Services server has been set to Install mode.
    03-19-2013,17:43:11 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,17:43:11 : Executing InstallLiveUpdate.
    03-19-2013,17:44:35 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,17:44:35 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,17:44:35 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,17:44:35 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,17:44:35 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:44:35 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,17:44:35 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:44:35 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,17:44:35 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:44:36 : Starting Install
    03-19-2013,17:44:36 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,17:44:36 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:44:36 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,17:44:36 : Discovered Total Actions: 115
    03-19-2013,17:44:36 : The return code from the MSI is: 1601
    03-19-2013,17:44:36 : Cleaning up the symc status key
    03-19-2013,17:44:36 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,17:44:36 : Clean up Symantec installer keys.
    03-19-2013,17:44:37 : Terminal Services enabled.
    03-19-2013,17:44:37 : Terminal Services server has been set to Execute mode.
    03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,17:44:57 : BeSeqDlgs::DlgInstallComplete
    03-19-2013,17:44:57 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,17:45:25 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:45:28 : Gathering Telemetry items
    03-19-2013,17:45:28 : Failed to start the management service
    03-19-2013,17:45:28 : Service BackupExecManagementService was not found on computer '.'.
    03-19-2013,17:45:28 : Sending Telemetry to Symantec
    03-19-2013,17:45:28 : Transmit Telemetry initialized.
    03-19-2013,17:45:28 : TelemetryRegistryHelpers initialized.
    03-19-2013,17:45:29 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
    03-19-2013,17:56:31 : Windows Operating System Version: 6.1
    03-19-2013,17:56:31 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,17:56:33 : Executing managed _Setup:
    03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,17:56:33 : Loading XML from:
    03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,17:56:33 : RawsDlgSequence::CheckInstMode
    03-19-2013,17:56:33 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,17:56:34 : Launching UI Install
    03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:56:35 : m_bUseNativeClient = 1
    03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:56:35 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,17:56:35 : CopySupportFiles
    03-19-2013,17:56:35 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,17:56:35 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:56:35 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,17:56:35 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,17:56:49 : Typical install value is set to : True
    03-19-2013,17:56:50 : Executing SQL_GetServicePack.
    03-19-2013,17:56:50 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:56:51 : Connected to SQL Server.
    03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:56:51 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:56:51 : Connected to SQL Server.
    03-19-2013,17:56:51 : Executing SQL_GetServicePack.
    03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:56:51 : Connected to SQL Server.
    03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:57:37 : m_bUseNativeClient = 1
    03-19-2013,17:57:37 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:58:41 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,17:58:41 : Install is not executing as the service account.
    03-19-2013,17:58:41 : Successfully Logged on as service account.
    03-19-2013,17:58:41 : Successfully impersonated service account.
    03-19-2013,17:58:41 : EUserName value successfully written to the registry.
    03-19-2013,17:58:41 : EPassword value successfully written to the registry.
    03-19-2013,17:58:41 : EDomain value successfully written to the registry.
    03-19-2013,17:58:51 : There were no remote computers selected for install
    03-19-2013,17:58:51 : m_bUseNativeClient = 1
    03-19-2013,17:58:51 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,17:58:52 : Terminal Services enabled.
    03-19-2013,17:58:52 : Terminal Services server has been set to Install mode.
    03-19-2013,17:58:52 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,17:58:54 : Executing InstallLiveUpdate.
    03-19-2013,17:59:06 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,17:59:06 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,17:59:07 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,17:59:07 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:59:07 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,17:59:07 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:59:07 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,17:59:07 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:59:07 : Starting Install
    03-19-2013,17:59:07 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:59:07 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,17:59:08 : Discovered Total Actions: 115
    03-19-2013,17:59:08 : The return code from the MSI is: 1601
    03-19-2013,17:59:08 : Cleaning up the symc status key
    03-19-2013,17:59:08 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,17:59:08 : Clean up Symantec installer keys.
    03-19-2013,17:59:10 : Terminal Services enabled.
    03-19-2013,17:59:10 : Terminal Services server has been set to Execute mode.
    03-19-2013,18:00:01 : The return code is: 0
    03-19-2013,18:00:01 : SUCCESS:  Installation has completed successfully.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:02:24 : Windows Operating System Version: 6.1
    03-19-2013,18:02:24 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:02:26 : Executing managed _Setup:
    03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:02:26 : Loading XML from:
    03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:02:26 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:02:26 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:02:26 : Launching UI Install
    03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:02:26 : m_bUseNativeClient = 1
    03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:02:26 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:02:26 : CopySupportFiles
    03-19-2013,18:02:26 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:02:27 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:02:27 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:02:27 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:03:11 : The return code is: 0
    03-19-2013,18:03:11 : SUCCESS:  Installation has completed successfully.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:03:21 : Windows Operating System Version: 6.1
    03-19-2013,18:03:21 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:03:22 : Windows Operating System Version: 6.1
    03-19-2013,18:03:22 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:03:23 : Executing managed _Setup:
    03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:03:23 : Loading XML from:
    03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:03:23 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:03:23 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:03:24 : Launching UI Install
    03-19-2013,18:03:24 : Executing managed _Setup:
    03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:03:24 : m_bUseNativeClient = 1
    03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:03:24 : Loading XML from:
    03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:03:24 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:03:24 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:03:24 : CopySupportFiles
    03-19-2013,18:03:24 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:03:24 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:03:24 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:03:24 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:03:24 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:03:58 : Typical install value is set to : True
    03-19-2013,18:03:58 : m_bUseNativeClient = 1
    03-19-2013,18:03:58 : Executing SQL_GetServicePack.
    03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:03:58 : Connected to SQL Server.
    03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:03:58 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:03:58 : Connected to SQL Server.
    03-19-2013,18:03:58 : Executing SQL_GetServicePack.
    03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:03:58 : Connected to SQL Server.
    03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:03:58 : m_bUseNativeClient = 1
    03-19-2013,18:04:20 : m_bUseNativeClient = 1
    03-19-2013,18:04:20 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:05:35 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,18:05:35 : Install is not executing as the service account.
    03-19-2013,18:05:35 : Successfully Logged on as service account.
    03-19-2013,18:05:35 : Successfully impersonated service account.
    03-19-2013,18:05:35 : EUserName value successfully written to the registry.
    03-19-2013,18:05:35 : EPassword value successfully written to the registry.
    03-19-2013,18:05:35 : EDomain value successfully written to the registry.
    03-19-2013,18:05:36 : There were no remote computers selected for install
    03-19-2013,18:05:36 : m_bUseNativeClient = 1
    03-19-2013,18:05:36 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,18:05:37 : Terminal Services enabled.
    03-19-2013,18:05:37 : Terminal Services server has been set to Install mode.
    03-19-2013,18:05:37 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,18:05:38 : Executing InstallLiveUpdate.
    03-19-2013,18:05:50 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,18:05:50 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,18:05:50 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,18:05:50 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:05:50 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,18:05:50 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:05:50 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,18:05:50 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:05:50 : Starting Install
    03-19-2013,18:05:50 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:05:50 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,18:05:50 : Discovered Total Actions: 115
    03-19-2013,18:05:50 : The return code from the MSI is: 1601
    03-19-2013,18:05:51 : Cleaning up the symc status key
    03-19-2013,18:05:51 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,18:05:51 : Clean up Symantec installer keys.
    03-19-2013,18:05:51 : Terminal Services enabled.
    03-19-2013,18:05:51 : Terminal Services server has been set to Execute mode.
    03-19-2013,18:06:32 : The return code is: 0
    03-19-2013,18:06:32 : SUCCESS:  Installation has completed successfully.
    03-19-2013,18:07:36 : Setup is already running.  Unable to initialize another instance of setup.
    03-19-2013,18:07:39 : Error initializing shared data
    03-19-2013,18:07:39 : ERROR:  Installation failed with error 1603. GetLastError = :0
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:13:44 : Windows Operating System Version: 6.1
    03-19-2013,18:13:44 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:13:44 : Windows Operating System Version: 6.1
    03-19-2013,18:13:44 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:13:46 : Executing managed _Setup:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:13:46 : Executing managed _Setup:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:13:46 : Loading XML from:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:13:46 : Loading XML from:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:13:47 : Launching UI Install
    03-19-2013,18:13:47 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:13:48 : m_bUseNativeClient = 1
    03-19-2013,18:13:48 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:13:48 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:13:48 : CopySupportFiles
    03-19-2013,18:13:48 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:13:48 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:13:48 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:13:48 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:13:54 : Typical install value is set to : True
    03-19-2013,18:13:55 : m_bUseNativeClient = 1
    03-19-2013,18:13:55 : Executing SQL_GetServicePack.
    03-19-2013,18:13:55 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:13:56 : Connected to SQL Server.
    03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:13:56 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:13:56 : Connected to SQL Server.
    03-19-2013,18:13:56 : Executing SQL_GetServicePack.
    03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:13:56 : Connected to SQL Server.
    03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:13:56 : m_bUseNativeClient = 1
    03-19-2013,18:14:41 : m_bUseNativeClient = 1
    03-19-2013,18:14:41 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:16:09 : Service account specified is not valid
    03-19-2013,18:16:09 : Unable to authenticate with the user and password information given for ACCENTPRESS\backup.
    03-19-2013,18:16:10 : Error validating service account credentials.
    03-19-2013,18:16:20 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,18:16:20 : Install is not executing as the service account.
    03-19-2013,18:16:20 : Successfully Logged on as service account.
    03-19-2013,18:16:20 : Successfully impersonated service account.
    03-19-2013,18:16:20 : EUserName value successfully written to the registry.
    03-19-2013,18:16:20 : EPassword value successfully written to the registry.
    03-19-2013,18:16:20 : EDomain value successfully written to the registry.
    03-19-2013,18:16:22 : There were no remote computers selected for install
    03-19-2013,18:16:22 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,18:16:23 : Terminal Services enabled.
    03-19-2013,18:16:23 : Terminal Services server has been set to Install mode.
    03-19-2013,18:16:23 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,18:16:25 : Executing InstallLiveUpdate.
    03-19-2013,18:16:37 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,18:16:37 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,18:16:38 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,18:16:38 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:16:38 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,18:16:38 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:16:38 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,18:16:38 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:16:38 : Starting Install
    03-19-2013,18:16:38 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:16:38 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,18:16:39 : Discovered Total Actions: 115
    03-19-2013,18:16:39 : The return code from the MSI is: 1601
    03-19-2013,18:16:39 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,18:16:39 : Clean up Symantec installer keys.
    03-19-2013,18:16:39 : Cleaning up the symc status key
    03-19-2013,18:16:41 : Terminal Services enabled.
    03-19-2013,18:16:41 : Terminal Services server has been set to Execute mode.
    03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,18:17:08 : BeSeqDlgs::DlgInstallComplete
    03-19-2013,18:17:08 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,18:17:09 : Gathering Telemetry items
    03-19-2013,18:17:09 : Failed to start the management service
    03-19-2013,18:17:09 : Service BackupExecManagementService was not found on computer '.'.
    03-19-2013,18:17:09 : Sending Telemetry to Symantec
    03-19-2013,18:17:09 : Transmit Telemetry initialized.
    03-19-2013,18:17:09 : TelemetryRegistryHelpers initialized.
    03-19-2013,18:17:21 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
    03-19-2013,18:17:33 : TransmitTelemetry.TransmitMessage URL=http://statsbe.norton.com/n/p, Caught WebException The remote name could not be resolved: 'statsbe.norton.com'
    03-19-2013,18:17:33 : Telemetry transmission failed.  Data was not sent.
    03-19-2013,18:17:33 : The return code is: 1601
    03-19-2013,18:17:33 : ERROR:  Installation failed with error 1601. GetLastError = :0
    03-19-2013,18:17:48 : Setup is already running.  Unable to initialize another instance of setup.
    03-19-2013,18:17:51 : Error initializing shared data
    03-19-2013,18:53:53 : m_bUseNativeClient = 1
    03-19-2013,18:53:53 : Executing SQL_GetServicePack.
    03-19-2013,18:53:53 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:53:54 : Connected to SQL Server.
    03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:53:54 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:53:54 : Connected to SQL Server.
    03-19-2013,18:53:54 : Executing SQL_GetServicePack.
    03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:53:54 : Connected to SQL Server.
    03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:53:54 : m_bUseNativeClient = 1
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:58:06 : Windows Operating System Version: 6.1
    03-19-2013,18:58:06 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:58:08 : Executing managed _Setup:
    03-19-2013,18:58:08 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:58:09 : Loading XML from:
    03-19-2013,18:58:09 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:58:09 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:58:09 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:58:09 : Launching UI Install
    03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:58:10 : m_bUseNativeClient = 1
    03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:58:10 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:58:10 : CopySupportFiles
    03-19-2013,18:58:10 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:58:11 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:58:11 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:58:11 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:58:15 : Typical install value is set to : True
    03-19-2013,18:58:16 : m_bUseNativeClient = 1
    03-19-2013,18:58:16 : Executing SQL_GetServicePack.
    03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:58:16 : Connected to SQL Server.
    03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:58:16 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:58:16 : Connected to SQL Server.
    03-19-2013,18:58:16 : Executing SQL_GetServicePack.
    03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:58:16 : Connected to SQL Server.
    03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:58:16 : m_bUseNativeClient = 1
    03-19-2013,18:58:49 : m_bUseNativeClient = 1
    03-19-2013,18:58:49 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:59:43 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,18:59:43 : Install is not executing as the service account.
    03-19-2013,18:59:43 : Successfully Logged on as service account.
    03-19-2013,18:59:44 : Successfully impersonated service account.
    03-19-2013,18:59:44 : EUserName value successfully written to the registry.
    03-19-2013,18:59:44 : EPassword value successfully written to the registry.
    03-19-2013,18:59:44 : EDomain value successfully written to the registry.
    03-19-2013,18:59:46 : There were no remote computers selected for install
    03-19-2013,18:59:46 : m_bUseNativeClient = 1
    03-19-2013,18:59:46 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,18:59:47 : Terminal Services enabled.
    03-19-2013,18:59:47 : Terminal Services server has been set to Install mode.
    03-19-2013,18:59:47 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,18:59:49 : Executing InstallLiveUpdate.
    03-19-2013,19:00:01 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,19:00:01 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,19:00:01 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,19:00:01 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,19:00:01 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,19:00:01 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,19:00:01 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,19:00:02 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,19:00:02 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,19:00:02 : Starting Install
    03-19-2013,19:00:02 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,19:00:02 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,19:00:02 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,19:00:03 : Discovered Total Actions: 115
    03-19-2013,19:00:03 : The return code from the MSI is: 1601
    03-19-2013,19:00:03 : Cleaning up the symc status key
    03-19-2013,19:00:03 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,19:00:03 : Clean up Symantec installer keys.
    03-19-2013,19:00:05 : Terminal Services enabled.
    03-19-2013,19:00:05 : Terminal Services server has been set to Execute mode.
    03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,19:00:07 : BeSeqDlgs::DlgInstallComplete
    03-19-2013,19:00:07 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,19:00:10 : Gathering Telemetry items
    03-19-2013,19:00:10 : Failed to start the management service
    03-19-2013,19:00:10 : Service BackupExecManagementService was not found on computer '.'.
    03-19-2013,19:00:10 : Sending Telemetry to Symantec
    03-19-2013,19:00:10 : Transmit Telemetry initialized.
    03-19-2013,19:00:10 : TelemetryRegistryHelpers initialized.
    03-19-2013,19:00:10 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
    03-19-2013,19:00:10 : Telemetry data was successfully sent to Symantec
    03-19-2013,19:00:10 : The return code is: 1601
    03-19-2013,19:00:11 : ERROR:  Installation failed with error 1601. GetLastError = :0 
    DJH

  • Full HyperV Backup - Symantec Backup Exec (any version)

    I'm sure this will be a favourite topic, but I was wondering if anyone could shed any light on this situation.
    We have a customer which has Server 2008 R2 with a .vhd which is 1.46TB in size, and a fixed disk.  They have only 150GB spare on the drive which seemed like enough.  We have had an occasional full HyperV backup to tape, but almost every other
    day it fails with the following in Backup Exec (now 2014):
    "V-79-40960-38521 - Snapshot Technology: Initialization failure on: "VRTSRV::\\HG-2008-STD\Hyper-V?Virtual?Machine\HG-2011-SBS". Snapshot technology used: Microsoft Volume Shadow Copy Service (VSS).
    A virtual machine snapshot could not be created.  Use the Event Viewer on the Hyper-V host to identify the cause.  If the virtual machine is not properly configured, it may be necessary to use the Event Viewer in the virtual machine to identify the
    cause."
    In the Event log of the Virtual Machine itself, there is only one VSS error, of which I'm told I can safely ignore, but resolved anyway:
    "Error: NetLocalGroupGetMemebers(spfarm), 0x80070560, The specified local group does not exist."
    I also have the following error on the physical host each time I run the backup:
    "Failed to create the backup of virtual machine 'HG-2011-SBS'. (Virtual machine ID A5185ADC-F34B-4898-927C-784EBC23EA1B)"
    Symantec say it's the VSS writers (apart from one support technician who admitted their product was a joke) but then Microsoft say it's Symantecs issue.  I'm inclined to believe Microsoft in this case, but I'm getting nowhere and our customer isn't
    getting a reliable backup of their whole vhd.
    Is this due to only having slightly less than 10% free space on the physical host or just Backup Exec being its usual self?  Does HyperV REQUIRE that you have a certain percentage of space free on the physical machine to process?

    For further troubleshooting: what happens when Windows Server Backup is configured for the VM backup and ran?
    Lenora Moss Technical Support Engineer, SMB Partner Support, Symantec Corporation www.symantec.com
    Surprise surprise, it works just fine :-)
    Ok, I have resolved it (kind of)
    I was having ESE errors when the backup tries to run and fails immediately after. This points to Exchange VSS errors so leads you down the wrong path.  After hours of following false leads, I finally found that Sharepoint can bibizarrely create these errors
    after installing SP1 and not running.  I ran the following command:
    PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
    ...which resolved most of these errors, but I still got ESE Information Store Shadow Copy instance aborted errors.  At this point, I'm still thinking it's a corrupt Exchange store and/or logs, as suggested by Microsoft.
    Long story short, after much digging, I came across an article suggesting to check into SQL writer service permissions having to be local administrator, and not local system account, I decided to disable this service as BE is installed on a Domain Controller
    so doesn't have a local admin account to use as suggested in some articles.  All of a sudden, I was in business!!  ESE VSS events were logging successfully and I'm now performing a full image backup finally.
    Although this seems like a Microsoft issue, the fact that Veeam backed up fine, along with Windows Server Backup, does still point to BE.  I still don't consider this a resolution because had the customer actually used SQL on this Server (they just use
    SBSMonitoring and BE instances) there wouldn't be a backup of SQL available that can utilize GRT, but would have to perform maintenance plans and have those added to the backup routine for DR.
    Hope this helps anyone else having these issues.  I would also advise moving the logs manually within Exchange to another drive if you have already used the SBS wizard to move the actual database, as it doesn't move the logs this way.  I've seen other
    backup Software fail for this very reason but not give any hint as to what the issue was.

  • Oracle agent configuration on Linix (Backup exec)-HELP :(

    HI,
    Am trying to configure Oracle Agent on my RHEL 4
    I have created the password file:
    $orapwd file=orapwTEST password=password entries=5
    add REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE to initTEST.ora
    Restart the database
    SQL> SELECT * FROM V$PWFILE_USERS;
    USERNAME SYSDB SYSOP
    SYS TRUE TRUE
    ARIBKP TRUE FALSE
    BACKUP TRUE TRUE
    SQL> show parameter remote_login_passwordfile
    NAME TYPE VALUE
    remote_login_passwordfile string EXCLUSIVE
    SQL>Grant sysdba to backup
    SQL>grant connect to backup
    SQL>grabt create session to backup
    SQL>grant dba to backup
    GRANTEE     PRIVILEGE
    BACKUP     AQ_ADMINISTRATOR_ROLE
    BACKUP     CONNECT
    BACKUP     DBA
    BACKUP     UNLIMITED TABLESPACE
    Configuring the Oracle Agent
    Choose one of the following options:
    1. Add a new Oracle instance to protect
    2. Edit an existing Oracle instance
    3. Delete an existing Oracle instance
    4. View Oracle instance entries that have been added in the Remote Agent Utility
    5. Quit
    Please enter your selection: 1
    Select an Oracle instance to configure
    Entry 1. TEST
    Enter the number 0 to go back
    Enter your selection: 1
    Enter the Oracle database SYSDBA user name: backup
    Enter the Oracle database SYSDBA password:
    Re-enter password:
    Validating credentials.......
    Failed to login.
    Please help me ..
    Edited by: KSV.DBA on Mar 15, 2011 6:42 AM

    HI,
    SYMC BACKUP EXEC 2010 Windows server ...
    SYMC BACKUP EXEC 2010 AGENT For ORACLE
    Steps:
    cd /opt/VRTSralus/bin/
    ./AgentConfig
    SSymantec Backup Exec Remote Agent Utility
    Choose one of the following options:
    1. Configure database access
    2. Configure Oracle instance information
    3. Quit
    Please enter your selection: 1
    Configuring machine information
    Choose one of the following options:
    1. Add system credentials for Oracle operations
    2. Edit system credentials used for Oracle operations
    3. Remove system credentials used for Oracle operations
    4. View system credentials used for Oracle operations
    5. Quit
    Please enter your selection: 4
    Entry 1
    ObjectName: DBAID
    Port: 5633
    Entry 2
    ObjectName: Machine
    HostUsername: oracle
    Port: 5633
    Configuring the Oracle Agent
    Choose one of the following options:
    1. Add a new Oracle instance to protect
    2. Edit an existing Oracle instance
    3. Delete an existing Oracle instance
    4. View Oracle instance entries that have been added in the Remote Agent Utility
    5. Quit
    Please enter your selection: 1
    Select an Oracle instance to configure
    Entry 1. TEST
    Enter the number 0 to go back
    Enter your selection: 1
    Enter the Oracle database SYSDBA user name: backup
    Enter the Oracle database SYSDBA password:
    Re-enter password:
    Validating credentials.......
    Failed to login.
    Please help me
    Thanks

  • X3650 and Backup Exec

    Dear all!
    We have a big problem with NetWare 6.5 SP7 and Backup Exec 9.2.
    Since the migration to a new hardware our backup is not running.
    Hardware Details:
    - Server: IBM x3650 7979
    - Tape: Quantum LTO-3 HH, SAS-connected
    Problem description:
    The tape drive is recognized correctly under NetWare and Bachup Exec. Problem comes, when even trying to label a tape: ""Job completed: With ERROR - A drive failure was detected. (24623)". We also tried different tapes, also a different tape drive (which is working without problems while being attached to another (Win 2003) server).
    Additional information:
    - The nwtape.cdm we renamed, to prevent it from being started.
    - CDMs and HAMs are from SP7.
    - For Backup Exec, we are using the lastest driver package.
    What is strange: we still have an "unbound object" when entering "list devices". But I do not have a clue, which driver is missing. Our startup.ncf:
    LOAD ACPIDRV.PSM
    ######## End PSM Drivers ########
    LOAD IDECD.CDM
    LOAD SCSIHD.CDM
    ######## End CDM Drivers ########
    LOAD IDEATA.HAM SLOT=10025
    LOAD AACRAID.HAM SLOT=10030
    ######## End HAM Drivers ########
    env NDSD_TRY_NMASLOGIN_FIRST=true
    LOAD KEYB.NLM Germany
    LOAD CHARSET.NLM CP850
    Is there something missig in our startup.ncf (which may cause the backup problem)?
    Any ideas, what we can do to make the backup run?
    Thanks in advance,
    chobbes

    chobbes wrote:
    >Is there something missig in our startup.ncf (which may cause the
    >backup problem)?
    I see no SAS driver loaded in your startup.ncf. Does that mean you have
    your tape drive connected to your raid controller? If yes, that is a
    configuration which is generally not recommended.
    Marcel Cox
    http://support.novell.com/forums
    Marcel Cox's Profile: http://forums.novell.com/member.php?userid=8

  • My iphone is broken,and i came to store to change a new one today. When I come home, I found I lost my backup and may be mistake is made during before backup.The information in my previous iphone is really important for me? how can I get the backup back?

    my iphone is broken,and i came to store to change a new one today. When I come home, I found I lost my backup and may be mistake is made during before backup.The information in my previous iphone is really important for me? how can I get the backup back?

    If you don't have a backup then the only possible solution is to go back to the store and see if they can get your old phone and create a backup of that. I know very often that Apple employees will wipe the returned iPhones clean before shipping them back to wherever they ship them.
    When you say your old phone was "broken" does this mean it is dead and won't turn on?
    Do you have a Time Machine backup of your computer, or a clone that might have this info on it?
    Other than that I hate to say you may be out of luck. Time Machine and/or a cloning program performed regularily will inevitably save your a** in situations like this.
    Good luck
    PM

  • For some reason , when i restore my iphone 4s to factory settings my headphones work when listening to music or youtube videos but when i backup my information onto it , it only comes out of one ear bud and i just got a new one from the apple store.

    for some reason , when i restore my iphone 4s to factory settings my headphones work when listening to music or youtube videos but when i backup my information onto it , it only comes out of one ear bud and i just got a new one from the apple store. my old iphone 4s audio jack was messed up but i just got a new one with my warranty , can anyone help me please.

    It doesn't matter what it is in your backup that's causing the problem because you can not selectively restore things from your backup. It's all or nothing.
    Set you phone up as a new device and start over.

  • Veeam back to tape after Backup Exec completes

    Yes, it's possible to use 2 mentioned solutions together. Hope, you're using Veeam latest version as it has enhanced support for tape devices. If not, have a look: http://www.veeam.com/kb1816
    Tapes don't have to be directly connected to Veeam Backup Server. Any Windows server with tapes can be added to Veeam environment as Tape Server, please refer to user guide for details.

    Is it possible to run a Veeam job to backup to Tape after Backup Exec completes at night and append the Full Vm to the end of the tape ? Using BE 2014 currently.
    Also does the Tape device need to be directly connected to the Veeam Server?
    Thanks in advance
    This topic first appeared in the Spiceworks Community

  • Do I need to shut DB when using Veritas Backup Exec 10d w/ Oracle agent?

    Hi All,
    Do I need to shutdown oracle when we back up the database server using Veritas Backup Exec 10d with the Oracle agent?
    thanks.

    Not required !!

  • SQL 2008 R2 Backups (Backup Exec) are failing with SQLVDI error

    Hi 
    We are experiancing Backup failures with SQL 2008 R2 DB with Backup Exec 2012, below are the errors
    Event ID 18210: BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'MSQ_00__2efc94bd_289f_4866_8dcb_3f3fde91416d_'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
    Event ID 1: SQLVDI: Loc=TriggerAbort. Desc=invoked. ErrorCode=(0). Process=1864. Thread=6220. Server. Instance=MSSQLSERVER. VD=Global\ECD_00__2efc94bd_289f_4866_8dcb_3f3fde91416d__SQLVDIMemoryName_0. 
    We upgraded the memory from 8 GB to 12 GB, also as per the kb article we registered sqlvdi.dll with the servers, but still have teh same issue
    Expect support to correct teh issue
    LMS

    Hi，
    I’m writing to follow up with you on this post. Was the problem resolved after performing our action plan steps?If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
    or concerns you may have.
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Do i need to backup my information before installation of Mac os x lion? I know I should always back up, but what i'm asking is will my information be there, or is it a totally clean install? Will my information have to be transfered?

    Do i need to backup my information before installation of Mac os x lion? I know I should always back up, but what i'm asking is will my information be there, or is it a totally clean install? Will my information have to be transfered?

    When I installed Lion all of my files were intact and where I left them, and I did not back up my Mac, however having seen some of the problems some people are coming across when installing Lion I would recommend backing up before you install (just to be on the safe side).
    Hope this helps!

  • Trying to Recover Data From Old Backup Exec Tapes

    I have been tasked with recovering data from an old Windows XP machine with an HP C1537A DDS3 tape drive.  The machine used Backup Exec to create the tapes.  In trying to recover the data I constantly get an error that says the data on the tape is inconsistent.  I tried to run the HP analysis utility but it said the error log of the drive was full and it would be necessary to do a firmware load to clear it.  I therefore loaded the lastest firmware.
    I ran the HP analysis utilities using one of the tapes as a scratch tape (to write over):
    Test 'DDS Drive Assessment Test' started on device 'HP C1537A' at address '6/0.0.0'
    Please reload your media. Do you wish to continue?
    |__ Analysis Results
        ||__ DDS Drive Assessment Test version V08.11.2006
        ||__ Device Analysis for DDS Drives
        ||__ Firmware rev 'L411' is up-to-date for 'C1537A' as of Wed May 25 19:00:00 2005.
        ||__ You appear to have used tapes not designed for this drive.
        ||__ Please use tapes that are compatible with your product.
        ||__ Unsupported tapes have been inserted 6 times.
        ||__ You appear to be using very old tapes not designed for this drive.
        ||__ Non-MRS tapes tapes have been inserted 3 times.
        ||__ There were 9 rules checked.
        ||__ Testing has completed and no problems were found.
    The tape that was used in the analysis was a maxlell HS-4/125s DDS3 tape -- the same type that was used to create the backup tapes. 
    Why does the drive think I am using "very old tapes not designed for this drive"?  The tapes were witten to by this drive.
    What is a "Non-MRS" tape?
    The end results appears to be that "no problems were found" but Backup Exec reports that the tapes have inconsistent data. 
    Any suggestions on how to make the tapes readable by Backup Exec would be appreciated.
    I am using Backup Exec 9.1 Rev 4691.  Please do not suggest using a later version as this is the latest version that (1) will run on a Windows XP Pro box and (2) that supports the tape drive.

    Saberman,
    Have you tried the Enterprise/Business forum for this?  I doubt anyone here on the consumer section will be able to help you with Tape Storage.
    Here is the link to the Tape section of the forum.
    http://h30499.www3.hp.com/t5/Tape-Libraries-and-Drives/bd-p/itrc-198
    Good luck.

  • Interface RMAN with BACKUP EXEC

    Hi,
    I want to backup my database on tape with backup exec but i don't know the parameters to put on init.ora.
    Thanks

    Possibly 2 parameters (depends on the environment, refer to your MML documentation):
    RMAN utilizes the LARGE_POOL area of the SGA for allocating
    memory for input/output buffers.
         The LARGE_POOL is only used if I/O Slaves are specified by one or
    both of the initialization parameters DBWR_IO_SLAVES or BACKUP_TAPE_IO_SLAVES.
    If DBWR_IO_SLAVES has a non-zero value and/or BACKUP_TAPE_IO_SLAVES is set to TRUE,
    then RMAN uses the LARGE_POOL because the I/O Slave Processes must coordinate their
    buffer read/writes in a common area. If no value for LARGE_POOL_SIZE is set in the init.ora file,
    and if I/O slaves are configured to be used, then RMAN uses the SHARED_POOL for
    input and output buffers. This can put severe strain on the Shared Pool,
    and should be avoided. This is often indicated by RMAN receiving an ora-4031
    error from the target database.
    Werner

  • Daylight savings and backup exec

    I haven't had this problem before, the OS and patching hasn't changed,
    here are the configurations and symptoms.
    OS platform is NW 6.5 OES SP6. Running the time command shows the
    correct time. However the Symantec Backup exec software 9.2 rev 1391 is
    exactly 1 hour behind. This stems from daylight savings. The backup
    software resides on a cluster node but is not cluster enabled. The node
    and software have been restarted but the time is still incorrect.
    This is a very strange behavior, has anyone felt this sting?
    Cheers,
    CB

    LinuxNewbie1,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Backup Exec: java.lang.OutOfMemoryError

    Hi
    I have NW6.5SP8 running BE9.2 and have started getting this error:
    java.lang.OutOfMemoryError
    Any ideas how to fix this?
    Thanks very much.

    Originally Posted by rjfraser
    Hi Bob
    Thanks for responding. The error is being reported by the "Backup Exec Java Application Server". I don't know that this is a Tomcat issue?
    I don't know that it is related, but I got an Abend on this server a couple of days ago. The first time in a very long time. The abend log suggested memory corruption. This caused me to start looking around and I found this "out of memory error".
    I don't believe you need the java app - only if you use the client side management tools. It also has a habbit of not restarting properly... so if you do a bestop then bestart, it can get balled up. But frankly, for me it works fine - so perhaps still worth fixing.
    -- Bob

Maybe you are looking for

  • 3g is not working in my iphone 5

    My 3G connection is not working in my iphone5. I made all settings correctly like opening the enable 3G in settings But still it doesnt work Can you help me??

  • Display in browser blob files (.doc, .pdf...) stored in the Database

    Hi, I want to display blob file from de DB to the browser, but when I click on the link of the document I want to open, nothing append. If I check the length of the file it is correct. I tried to write it in a directory to see what appends. I can onl

  • Using check boxes appear as a "tick" and I want a "X"

    Hi guys - new user to Adobe Forms (MAC Adobe Acrobat XI) - I have used check boxes in my first form however when I check them they appear as a "tick" and I want a "X" - I went to the properties section and tried all the options (circle, etc) but it a

  • How can I save important sms's externally to my phone?

    hi i have an sms thread on my phone which is very long and is preventing me from being able to upgrade to the latest iOS due to the storage being used. however it is really important evidence to be used in court next year and I cannot delete the thre

  • Rollback through XI

    I received this email from our web developer who is building a web interface connection to SAP via XI. His email says: I wonder if either of you know whether the XI interface supports the WS-Transaction or WS-AtomicTransaction specifications? I'm try