Backup (hdup) errors following tar upgrade

Since the upgrade of tar (1.22->1.23), I am having problems with some of my hdup backups. For the affected backup profiles, the hdup log says that a backup was performed successfully but the backup file is only 42 bytes, and something similar to the following appears in the kernel log:
tar[19168]: segfault at 31 ip 000000000042c850 sp 00007fff4c4365e8 error 4 in tar[400000+55000]
Deleting the previous backups and running an initial monthly gives the same error.
If I downgrade tar, the backups work fine.
As I mentioned, it only occurs for some of my backup profiles. I haven't been able to work out what differentiates those that do work from those that don't.
Here is hdup's command:
/bin/tar cpf - --sparse --no-recursion --null --files-from *BKUP*/etc/filelist --listed-incremental *BKUP*/etc/inclist.monthly --ignore-failed-read |/usr/bin/lzop -6 > *BKUP*/X.2010-03-30.monthly.tar.lzo.
It seems like it might be related to this bug report.
Has anyone had a similar problem? I would recommend that people using hdup check that the backups are ok.

I am having the same problem with tar 1.23. All my backups have size of 14 bytes since the day of the update. I downgraded to 1.22 and everything works fine.
Last edited by tikysal (2010-04-21 00:20:19)

Similar Messages

  • Disk Read Error following HD Upgrade

    I'm trying to upgrade the hard drive on my T60 laptop and am getting the message "A disk read error occurred. Press Ctrl + Alt + Del to restart." I'm grateful for any help anyone can give.
    The old hard drive is a 60 GB Hitachi model HTS541060G9SA00. The new hard drive is a 500 GB Samsung model HN-M500MBB. I used Acronis True Image to create an image of the partitions on the old hard drive, following the procedure and guidelines I found here:
    http://www.wilderssecurity.com/showpost.php?p=1299861&postcount=9
    http://www.wilderssecurity.com/showthread.php?t=203480
    To reiterate a few aspects of the process: I had the *new* hard drive within the machine; I booted to the Acronis CD; I restored/resized the image stored on a USB hard drive to the new hard drive. When I boot to the new hard drive, I get the "disk read error" message.
    What I've tried:
    * I booted to UBCD. From this, I can open "My Computer" and see the partitions on the new hard drive, and I can see the files and folders within it. The C: partition is NTFS, 64428 MB with 43501 MB free; the D: partition is NTFS, 418765 MB with 393804 MB free. I assume this means that the hard drive itself is not faulty.
    * I tried changing one BIOS setting: the "Serial ATA (SATA)" setting on "[Compatibility]" and booting (got the disk read error) and then on "[ACHI]" and booting (again, the disk read error). This is beyond my knowledge base, but I read on a forum somewhere that toggling this setting helped someone with a somewhat similar problem.
    Any suggestions? I'm grateful for any help you can give. Thanks!
    Solved!
    Go to Solution.

    I hadn't realized that the two forums were linked or frequented by the same community or I wouldn't have posted in both places. I was able to get to a solution, details here:
    forum.thinkpads.com/viewtopic.php?f=29&t=102535

  • I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."

    I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
    I wiped it out and restored from backup but I am still getting the same message.

    I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
    ~~~
    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
    ~~~
    Good Luck!
    ~R

  • I can't access iPhoto following my upgrade to yosemite

    i can't access iPhoto following my upgrade to yosemite

    The first thing to do:  Make a backup of your iPhoto Library. Don't update iPhoto without having a backup of your iPhoto library.
    When I tried I received the following message This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
    This error message means, that you did not yet associate your copy of iPhoto (preinstalled on your Mac) with your AppleID by clicking the "accept" button at AppStore "Purchased" page.
    First try to "Accept" iPhoto on the Purchased tab and try, if you then can update iphoto from the Updates tab.
    Now check the "Purchased" tab. Is iPhoto among your Purchases to "Accept" or "Install"? Then accept and/or install.
    If it is not possible, delete iPhoto from the Applications folder .
    (don't empty the Trash).
    If it is not among your Purchases, open the AppStore main tab, search for iPhoto using the Search field, and buy it from the AppStore. If you already owned any version of iPhoto '11, this purchase should be free, from earlier versions it may be a paid upgrade.
    If all fails there is no help but contacting the App Store Support to sort out the AppleID. Use this link: http://www.apple.com/support/mac/app-store/contact/

  • Error Message: "This upgrade path is not supported"

    Scenario
    During the process of upgrade to Windows 10 Technical Preview, we may encounter the error “This upgrade path is not supported. Please close Setup and re-launch from the root of the media or go back and pick a different installation
    choice.” in the Compatibility report.
    Analysis
    Step 1: Perform the scenario 1: the upgrade installation fails.
    Reproduce this error following the steps below:
    Download the Windows 10 Technical Preview ISO installation file.
    Extract the ISO installation file to C:\New folder, and now the location of the installation file is
    C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\.
    Click setup.exe from the installation file, and then click
    Install now.   
    Setup is starting, and then get two options Upgrade and
    Custom which is the classic setup wizard which we can see during booting from DVD.
    Click Upgrade to run upgrade installation, however, the error occurs.
    It seems that it is impossible to perform upgrade installation to Windows 10 Technical Preview, although it is fine to click
    Custom to perform clean installation which cannot keep the personal setting and applications.
    However, what we want is upgrade installation, not clean installation.
    Step 2: Perform the scenario 2: the upgrade installation works fine.
    If extract the ISO installation to C:\New in the above step2, click the
    setup.exe from the installation file C:\New\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\, the upgrade installation would work fine, which is as shown the following two figures:
    Step 3: Check the setupact.log
    file which contains information about setup actions during the installation of the two scenarios.
    Scenario 1: Check the setupact.log file of the scenario 1. The detailed information is shown as below:
    2014-10-14 19:03:40, Info UI Determining whether we should run ConX or legacy setup
    2014-10-14 19:03:42, Info UI Will launch ConX setup experience
    2014-10-14 19:03:42, Info UI Launching ConX setup experience
    2014-10-14 19:03:42, Info UI Launching C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\SetupPrep.exe
    2014-10-14 19:03:44, Info UI Unknown command line for ConX setup experience. Launching legacy setup experience.
    2014-10-14 19:03:44, Info UI Determining if we are in WDS/Unattend mode
    2014-10-14 19:03:44, Info UI No need to hide autorun
    2014-10-14 19:03:44, Info [0x0a000a] UI Autorun:Autorun core successfully initialized!!!
    2014-10-14 19:03:44, Info [0x0a000b] UI Autorun:Autorun UI successfully initialized!!!
    2014-10-14 19:03:44, Info UI AppWindow has layout style 0
    2014-10-14 19:03:45, Info UI NavWindow has layout style 0
    2014-10-14 19:03:45, Info [0x0a011c] UI WizardDialogPost::SetActive
    2014-10-14 19:04:57, Info [0x0a018e] UI Passing command line parameter ("C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\setup.exe /HideWelcome /uilanguage:en-US /targetlanguage:en-US") to IBS.
    Scenario 2: Check the setupact.log file of the scenario 2. The detailed information is shown as below:
    2014-10-14 19:08:04, Info UI Determining whether we should run ConX or legacy setup
    2014-10-14 19:08:05, Info UI Will launch ConX setup experience
    2014-10-14 19:08:05, Info UI Launching ConX setup experience
    2014-10-14 19:08:05, Info UI Launching C:\New\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\SetupPrep.exe
    According to the two logs, we can get the following points:
    In scenario 1, it would invoke the SetupPrep.exe in the source folder directly to perform an installation preparation. However, it failed to recognize the path
    C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\SetupPrep.exe. Then it would launch legacy setup.
    In the scenario 2, Windows setup would be redirected to the ConX setup to perform upgrade installation automatically.
    So, what is the difference of the scenario 1 and 2 to bring the different results of upgrade installation?
    Workaround
    Based on lots of testing, we find that if there is no space in the extracting location of the ISO installation
    file, the upgrade installation would work fine.
    What’s more, we can get the meaning of the two setup models in the setupact.log:
    Legacy setup: it is same with setup from DVD boot.
    ConX setup: it would check the compatibility and language UI for upgrade preparation, then perform migration and upgrade directly.
    Additional Resource
    From the release of Windows 10 Technical Preview, many users have installed and tested Windows 10 Technical Preview, we still hope more and more users would download and install Windows 10 Technical Preview for test, and provide
    us your feedback.
    Download Windows Technical Preview
    http://windows.microsoft.com/en-us/windows/preview-iso
    Download Windows Technical Preview for Enterprise
    http://www.microsoft.com/en-us/evalcenter/evaluate-windows-technical-preview-for-enterprise
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Hello,
    I would guess that existence of a space in the folder name is what the issue is.  Try removing the space from the folder name and see if works. New_Folder for example
    Thanks, Darrell Gorter [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights.

  • Trying to copy iPhoto Library to external hard drive for backup.  Error message:  The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

    Trying to copy iPhoto Library to external hard drive for backup.  Error message:  The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

    That code is
    -36
    ioErr
    I/O error (bummers)
    Make sure the EHD is formatted OS X Extended (journaled) and run Disk Utilty on the EHD and repair the disk.  If that fails to help I'd try the following:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button,                         
    navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    In the next  window name the new library and select the external HD as the location of the newly rebild library.
    Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • Time machine backup fails; error creating folder. Western Digital drive requires password which is perhaps/likely the issue. I can't eliminate the password/encryption.

    Time Machine backup fails on new WD external drive (My Passport Studio); error creating folder (after several hours of Time Machine apparently working).
    Background: I purchased a Western Digital drive from an Apple Store to use for Time Machine backup.  I followed the Western Digital instructions that came with the drive for Mac. I didn't get the Time Machine prompt which the instructions indicated I would receive--namely to select whether I want to encrypt my Time Macine backups. (I already have a Time Machine backup I use at another location, which is perhaps why I didn't receive a prompt.)
    I decided to install the Western Digital utilities and security software that comes on the disk--with a view to potentially encrypting the disk (since I still wanted to have an encrypted backup since I was mobile). I forgot that (from experience 2-years previous) that I shouldn't install Western Digital software because it just makes life really complicated.
    I tried several times to do a Time Machine backup with failures each time (error creating the backup folder). I tried to get help from WD but I don't think the technicians were following what my issue was. Potentially I was not helpful in explaining it. I deleted the WD applications from my system after the first contact with WD. However the problem persisted--I still had an encrypted hard drive. After three phone sessions with three different WD techs I still could not get a solution. (By the second call I was not at all interested in having an encrypted drive--I just wanted to format and restore the drive to an unencrypted state so that I could have SOME kind of Time Machine backup.)
    I still don't have a solution--either to get Time Machine working with the WD encryption/password on the drive, or to remove the encryption so I can backup. Right now my options are to return the drive to the Apple Store -- or get a return authorization from WD. Seems crazy since the drive is fine and I have the working password.

    Never install "helpful software" provided by WD and Seagate (or any HD mfg.)
    All such stuff is fluff and nonsense that interferes with normal HD operation.
    Always when you buy a new HD, format it for Mac and then use it to TM backup or clone a HD, or archive data.
    Less is more on HD new out of box.  A "blank brick", no fluff and cotton candy software

  • Encountered error 6  when upgrading Iphone 5s from 7.1.2 to 8.3

    I encountered error 6  when upgrading Iphone 5s from 7.1.2 to 8.3
    I've tried upgrade iphone on three computers , the results are all the same.
    One of the computers successfully upgrade my ipad to 8.3.
    There are 2GB left on IPhone 5S before I perform the upgrade.
    It should be enough for iTunes to finish the process, right?
    But in the log, it says  "copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device"
    why is that?
    Any way for me to continue the upgrade?  it seems it's almost done.
    Thank you
    the end of the log  is as below:
    [10:36:29.0714] Could not find libAppleSWDHIDFlashUpdater.dylib
    [10:36:29.0714] entering fixup_var
    [10:36:29.0714] entering update_var_directory_hierarchy
    [10:36:29.0714] replace_data_partition_path: moving /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets
    [10:36:29.0714] copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device
    [10:36:29.0714] copy /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets failed: 0x2
    [10:36:29.0714] unable to copy directory: 2
    [10:36:29.0714] failed to replace path mobile/Library/PreinstalledAssets: 2
    [10:36:29.0714]
    [10:36:29.0714] ==== end of device restore output ====
    [10:36:30.0280] AMRAuthInstallDeletePersonalizedBundle
    [10:36:30.0421] <Restore Device <<<<<IMEI>>>>>>0>: Restore failed (result = 6)
    [10:36:30.0542] Restore completed, status:6
    [10:36:30.0542] Failure Description:
    [10:36:30.0542] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
    [10:36:30.0542]    Depth:1 Error:無法完成作業。(AMRestoreErrorDomain 錯誤 6 - Failed to handle message type StatusMsg)
    [10:36:30.0542]       Depth:2 Error:無法完成作業。(AMRestoreErrorDomain 錯誤 6 - failed to fixup var)

    Hello there, Kenduck.
    It sounds like you are trying to update your iPhone 5s to the most current version of iOS and are getting an Error 6 message. The following Knowledge Base article offers up some great information in regards to that very error message:
    Get help with iOS update and restore errors - Apple Support
    Particularly:
    Check your security software
    Errors: 2, 4, 6, 9, 1611, 9006.
    Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    If you still see the error message, check for USB connection issues.
    Thanks for reaching out to Apple Support Communities.
    Kind Regards,
    Pedro.

  • Itunes will not open without re-booting pc following recent "upgrade". How can this be fixed?

    Itunes will not open without re-booting pc following recent "upgrade". How can this be fixed?

    I do the download for the new version, it goes smooth, and then when I try to open it up, it pops up in my Task Manager for a moment and then disappears. No error messages, just disappears.
    hmmmm. can you check something for me? (this might give us a heads up on the nature of the itunes problem.)
    try launching your QuickTime. does it:
    (a) launch perfectly fine?
    (b) fail to launch with an error message? (if so, what does it say?)
    (c) exhibit other peculiar behavior? (if so, could you describe it for us?)

  • TS5376 version 11.1.4 R6034 error - followed instructions, still broke

    Version 11.1.4 R6034 error - followed instructions, still broke
    What do I do after un-installing, rebooting, deleting DLLs, and re-installing 3 times and I still get the same error?
    Instructions say to uninstall all related iTunes/apple products. Why do the instructions not provide a list of related products?
    Does related products mean Bonjour too?  QTMovies.dll looks like "Quick time"  should I un-install that too?
    Maybe apple could test their code before asking everyone to upgrade to the latest version.
    Maybe the code that does the install could check for prerequsits before trashing a working version of itunes.

    Follow the instructions in this user tip. You may need to run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99468)

  • Time Machine backups hanging -- error message included

    Hello. I've read a bunch of the previous topics and tried some other recommendations, but I'm still having trouble. I haven't had a good backup in 10 days now. I'm backup directly via USB to a Western Digital Passport drive.
    So it wasn't until today that I found the TM Buddy. I installed that and systematically excluded certain .plist files that were apparently causing problems. Then I followed Pondini's advice and made the changes in Spotlight and Energy Saver preferences. I also renamed my computer in Sharing to just one word. I even tried a different USB cable, which actually seems to help a bit because my previous cable would cause immediate 'ejections' if it was breathed upon. And of course, I did a Repair Disk in Disk Utility which showed a normally functioning drive.
    Anyway, so I was getting the 'Waiting to be indexed (100) and (101)' errors and the TM job hanging on 'Indexing...'. I finally had one run successfully after 20+ tries, but it only said it backed up around 735MB -- very low number after 10 days since the last successful backup.
    Now, I'm trying a new backup and it's stuck on 'Cleaning Up' according to the spinning menubar icon. The TM widget shows the following:
    Starting standard backup
    Backing up to: /Volumes/Back-up HDD/Backups.backupdb
    Error writing to backup log. NSFileHandleOperationException:* -[NSConcreteFileHandle writeData:]: Input/output error
    Error: (-36) Creating directory 14EB9137-94AE-44B6-BD8A-9283EC9C943D
    Failed to make snapshot.
    Error writing to backup log. NSFileHandleOperationException:* -[NSConcreteFileHandle writeData:]: Input/output error
    Error writing to backup log. NSFileHandl
    Wow - as I'm writing this, my drive gets ejected again and the backup stops and drive disappears in Finder. I'm trying to find any other solution besides throwing $100 at another drive. My WD Passport is less than 1.5 yrs old. If it's the drive, then so be it but I'd like to be sure.
    Any help, please? Thanks so much in advance.

    MichaelEB wrote:
    Error writing to backup log. NSFileHandleOperationException:* -[NSConcreteFileHandle writeData:]: Input/output error
    Error: (-36) Creating directory 14EB9137-94AE-44B6-BD8A-9283EC9C943D
    Failed to make snapshot.
    Error writing to backup log. NSFileHandleOperationException:* -[NSConcreteFileHandle writeData:]: Input/output error
    Error writing to backup log. NSFileHandl
    All various ways of saying "cannot write to the drive." It either couldn't create the (hidden) log file on the TM drive, then couldn't create the folder for the backups, then couldn't write to the log again.
    It's probably the drive.
    Less likely (but possible considering the cable issue) is a port (try others), or other connections (hook it up directly; no hubs or daisy-chaining.
    Another long shot is another USB device taking too much power intermittently. Disconnect all other USB devices.

  • Error found when upgrading from11.5.10.2 to R12.1.1 with the DB R 11.2.0.1

    Hi All,
    I have following the "Upgrade Advisor: E-Business Suite (EBS) Upgrade from 11.5.10.2 to 12.1.3 [ID 269.1]", and select the option 3 Configure --> Preform Upgrade on Test System --> Upgrade Test Environment 12.1.1 --> Perform Upgrade --> Apply AD 12.1.1 upgrade driver (required) (The steps before apply AD 12.1.1 have been done, the R12 rapid install have been done.)
    According to their instructions, I need to merge 3 patches 9477107, 9179588, 7461070, and applied it to R12.1.1, it was successfully. (I have attached the adpatch file to metalink, they also confirmed that the patches have been applied successfully. ** Due to I have some warning messages found in the log, that's the reason I raised a SR to ask Oracle about it.)
    After this step, the step 10. Run the American English upgrade patch driver (required) to be executed, but error found.
    Accroding to this step, I need to apply 7303029:12.1.0 with preinstall mode and merge its with the American English drive which located in $AU_TOP/patch/115/driver/u6678700.drv.
    As the patch readme file instructions, "adpatch options=nocopyportion,nogenerateportion" have been executed. After a while, the autopatch process was failed due to
    AutoPatch error:
    Missing prerequisite codelevel for entity 'ad'.
    This patch requires the following codelevel or higher: 'R12.AD.B.1'.
    The current on-site codelevel for the entity 'ad' is : 'R12.AD.A'.
    In order to apply this patch you must first apply a patch that introduces
    at least the minimum required codelevel.
    You may merge this patch with a patch that introduces the required codelevel.
    I was so wondering about it, how's come the ad codelevel doesn't match, the patch 7461070 should be the level 'R12.AD.B.1' (can be found in the patch's readme file.), how's come the current on-site code level is 'R12.AD.A'?
    I was stuck in this point, can't process further.
    Anyone was facing this issue too? If so, could you please let me know how to solve it. Or anythings I can do now? Do I need to re-apply the patch 7461070 again?
    Thank you so much.
    Amy

    Amy,
    As this an E-Business migration problem it would be better to ask the question in an E-Business forum.
    Try here to begin with -
    EBS General Discussion -
    General EBS Discussion
    and they should be able to help or direct you to the best forum to follow up.
    Regards,
    Mike

  • Error start java upgrade SOLMAN 7.01 to 7.1

    Hi gurus, I'm faced an error in a upgrade SOLMAN 7.01 to 7.1 when try to start de java instance: I'm using SUM 1.0 SP 12 Patch 13. Follow the START-AS-JAVA_01.LOG:
    Apr 30, 2015 2:56:32 PM [Info  ]: Start service for instance 10 on host srv-sum-ora ... Apr 30, 2015 2:56:32 PM [Info  ]: Process ID 499, name sapstartsrv has been started. Apr 30, 2015 2:56:32 PM [Info  ]:  Command line: /usr/sap/SUD/DVEBMGS10/exe/sapstartsrv pf=/usr/sap/SUD/SYS/profile/START_DVEBMGS10_srv-sum-ora -D Apr 30, 2015 2:56:32 PM [Info  ]:  Standard out: /SUM/SUM/sdt/log/SUM/INSTALL_SERVICE_10_02.OUT Apr 30, 2015 2:56:32 PM [Info  ]: Process ID 499 has been started. Apr 30, 2015 2:56:32 PM [Info  ]: Waiting for process ID 499, name sapstartsrv to finish. Apr 30, 2015 2:56:32 PM [Info  ]: Process ID 499, name sapstartsrv has been finished, exit code 0. Apr 30, 2015 2:56:32 PM [Info  ]: Wait for service for instance 10 on host srv-sum-ora to start... Apr 30, 2015 2:56:34 PM [Info  ]: Process ID 500, name sapcontrol has been started. Apr 30, 2015 2:56:34 PM [Info  ]:  Command line: /usr/sap/SUD/DVEBMGS10/exe/sapcontrol -nr 10 -host srv-sum-ora -prot NI_HTTPS -function GetProcessList Apr 30, 2015 2:56:34 PM [Info  ]:  Standard out: /SUM/SUM/sdt/tmp/SAPCONTROL_GETPROCESSLIST_10_03.OUT Apr 30, 2015 2:56:34 PM [Info  ]: Process ID 500 has been started. Apr 30, 2015 2:56:34 PM [Info  ]: Waiting for process ID 500, name sapcontrol to finish. Apr 30, 2015 2:56:37 PM [Info  ]: Process ID 500, name sapcontrol has been finished, exit code 4. Apr 30, 2015 2:56:37 PM [Info  ]: The sapcontrol service on host srv-sum-ora and instance 10 is started. Apr 30, 2015 2:56:37 PM [Info  ]: Service for instance 10 on host srv-sum-ora has been started. Apr 30, 2015 2:56:37 PM [Info  ]: Starting instance number 10 on host srv-sum-ora with timeout of 7200 seconds. Apr 30, 2015 2:56:37 PM [Info  ]: Process ID 501, name sapcontrol has been started. Apr 30, 2015 2:56:37 PM [Info  ]:  Command line: /usr/sap/SUD/DVEBMGS10/exe/sapcontrol -nr 10 -host srv-sum-ora -prot NI_HTTPS -function GetProcessList Apr 30, 2015 2:56:37 PM [Info  ]:  Standard out: /SUM/SUM/sdt/tmp/SAPCONTROL_GETPROCESSLIST_10_04.OUT Apr 30, 2015 2:56:37 PM [Info  ]: Process ID 501 has been started. Apr 30, 2015 2:56:37 PM [Info  ]: Waiting for process ID 501, name sapcontrol to finish. Apr 30, 2015 2:56:38 PM [Info  ]: Process ID 501, name sapcontrol has been finished, exit code 4. Apr 30, 2015 2:56:38 PM [Info  ]: Starting instance number 10 on host srv-sum-ora with timeout of 7200 seconds. Apr 30, 2015 2:56:38 PM [Info  ]: Triggering an instance start by sapcontrol... Apr 30, 2015 2:56:38 PM [Info  ]: Process ID 502, name sapcontrol has been started. Apr 30, 2015 2:56:38 PM [Info  ]:  Command line: /usr/sap/SUD/DVEBMGS10/exe/sapcontrol -nr 10 -host srv-sum-ora -prot NI_HTTPS -function Start Apr 30, 2015 2:56:38 PM [Info  ]:  Standard out: /SUM/SUM/sdt/tmp/SAPCONTROL_START_10_01.OUT Apr 30, 2015 2:56:38 PM [Info  ]: Process ID 502 has been started. Apr 30, 2015 2:56:38 PM [Info  ]: Waiting for process ID 502, name sapcontrol to finish. Apr 30, 2015 2:56:40 PM [Info  ]: Process ID 502, name sapcontrol has been finished, exit code 0. Apr 30, 2015 2:56:40 PM [Info  ]: An instance start was triggered. Apr 30, 2015 2:56:40 PM [Info  ]: Sent the start command to instance number 10 on host srv-sum-ora with timeout of 7200 seconds. Apr 30, 2015 2:56:40 PM [Info  ]: Process ID 503, name sapcontrol has been started. Apr 30, 2015 2:56:40 PM [Info  ]:  Command line: /usr/sap/SUD/DVEBMGS10/exe/sapcontrol -nr 10 -host srv-sum-ora -prot NI_HTTPS -function WaitforStarted 7200 5 Apr 30, 2015 2:56:40 PM [Info  ]:  Standard out: /SUM/SUM/sdt/tmp/SAPCONTROL_WAITFORSTARTED_10_01.OUT Apr 30, 2015 2:56:40 PM [Info  ]: Process ID 503 has been started. Apr 30, 2015 2:56:40 PM [Info  ]: Waiting for process ID 503, name sapcontrol to finish. Apr 30, 2015 4:56:45 PM [Info  ]: Process ID 503, name sapcontrol has been finished, exit code 1. Apr 30, 2015 4:56:45 PM [Error ]: Return code condition success evaluated to false for process sapcontrol for action wait for started. Apr 30, 2015 4:56:45 PM [Error ]: The following problem has occurred during step execution: com.sap.sdt.util.diag.DiagException: Could not start SAP instance with number 10. Could not check if the instance number 10 on host srv-sum-ora is started. Sapcontrol client could not perform action wait for started on instance 10 Return code condition success evaluated to false for process sapcontrol for action wait for started. Thanks for the help!!!

    check out this Kbase article
    http://docs.info.apple.com/article.html?artnum=301422
    it says
    Logic Pro 7.1: Erroneous newer software message when installing in Tiger
    When you're installing Logic Pro 7.1 on a Mac OS X 10.4 "Tiger" computer, certain circumstances may produce this alert message:
    The chosen volume contains software which is newer then [sic] the software you are installing.
    The message is erroneous; it can happen when you're updating from Logic Pro version 7.01. Simply click the Continue button in the dialog to ignore it.

  • Backup failed error code o8x100037

    any ideas?

    Hi,
    >>Backup Failed Error Code 2155348129 Volume Shadow Copy Service error:
    As the following article suggests, this error can be caused by the incorrect Active volume.
    Troubleshooting VSS Writer Failure
    http://social.technet.microsoft.com/wiki/contents/articles/1261.troubleshooting-vss-writer-failure.aspx
    If the issue persists, we can follow the article below to re-register the dlls that are needed by the VSS service to see if it helps.
    Volume Shadow Copy Service and DLLs
    http://blogs.technet.com/b/sdoakes/archive/2006/02/03/418722.aspx
    In addition, the following thread focused on the similar issue and can be referred to as reference.
    Failed Full System Backup Error: 2155348129
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/7eaba8d9-2fc8-41fd-a2ef-18a8d8b9186e/failed-full-system-backup-error-2155348129?forum=windowsbackup
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Backup verify error

    Dear all,
    My QAS backup return error code in the backup process,i check the sr3.data11permission,it' 755,what should i do?
    Following is a part of backup detail log.
    thank you in advance.
    BR0352I Decompressing /oracle/QAS/sapreorg/sr3.data10
    BR0355I from /oracle/QAS/sapbackup/bedistwg/sr3.data10.Z ...
    BR0280I BRBACKUP time stamp: 2010-05-31 20.22.14
    BR0395I Verifying /oracle/QAS/sapreorg/sr3.data10 using DBVERIFY...
    BR0396I Verification of backup of /oracle/QAS/sapdata2/sr3_10/sr3.data10 using DBVERIFY successful
    BR0280I BRBACKUP time stamp: 2010-05-31 20.22.59
    BR0063I 79 of 144 files processed - 376548.596 MB of 667477.082 MB done
    BR0204I Percentage done: 56.41%, estimated end time: 23:45
    BR0001I ****************************______________________
    BR0428W File /oracle/QAS/sapreorg/sr3.data11 will be overwritten
    BR0352I Decompressing /oracle/QAS/sapreorg/sr3.data11
    BR0355I from /oracle/QAS/sapbackup/bedistwg/sr3.data11.Z ...
    BR0280I BRBACKUP time stamp: 2010-05-31 20.24.48
    BR0395I Verifying /oracle/QAS/sapreorg/sr3.data11 using DBVERIFY...
    BR0278E Command output of '/oracle/QAS/102_64/bin/dbv file=/oracle/QAS/sapreorg/sr3.data11 blocksize=8192':
    DBVERIFY: Release 10.2.0.2.0 - Production on Mon May 31 20:24:48 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    DBV-00102: File I/O error on FILE (/oracle/QAS/sapreorg/sr3.data11) during end read operation (-1)
    BR0280I BRBACKUP time stamp: 2010-05-31 20.24.48
    BR0279E Return code from '/oracle/QAS/102_64/bin/dbv file=/oracle/QAS/sapreorg/sr3.data11 blocksize=8192': 1
    BR0397E Verification of backup of /oracle/QAS/sapreorg/sr3.data11 using DBVERIFY failed due to previous errors
    BR0115I Compression rate for all files 4.1280:1
    BR0280I BRBACKUP time stamp: 2010-05-31 20.24.50
    BR0304I Starting and opening database instance QAS ...
    BR0280I BRBACKUP time stamp: 2010-05-31 20.24.58
    BR0305I Start and open of database instance QAS successful
    BR0056I End of database backup: bedistwg.afd 2010-05-31 20.24.48
    BR0280I BRBACKUP time stamp: 2010-05-31 20.24.59
    BR0054I BRBACKUP terminated with errors
    BR0280I BRBACKUP time stamp: 2010-05-31 20.24.59
    BR0291I BRARCHIVE will be started with options '-U -jid ALGOF20100531160000 -d disk -c force -p initQAS.sap -cds -w use_rmv'
    BR0280I BRBACKUP time stamp: 2010-05-31 20.24.59
    BR0292I Execution of BRARCHIVE finished with return code 3

    Hello Damon,
    Are you specifying "-cds" in the parameter string for BRARCHIVE?
    This option is not supported for DISK and can return the error code 3.
    You might want to change the option in DB13 to -cd ( copy_delete) or -s (save)
    Hopefully this was helpful.
    Regards,
    Paul

Maybe you are looking for

  • 1099 Misc IRS file

    Hi Team , After implementing the SAP Note 1666672 for US legal changes 2011, In 1099 Misc IRS file house number is missing . Could you please help on this .. Thank You Jagadeshwar.G 91-9676486129

  • Triple state checkbox

    Hi, I have scoured this forum but I can't seem to find out how to make a triple state check box bound to a database column. The checkbox should return the following values, and also pick up whatever is in the database table when the record is loaded

  • Configure not finding dependencies but they are installed!

    Hi, I was just trying to install pychosynth from AUR via yaourt, but configure just keeps complaining about SoundTouch and Liblo not being installed, however they are. I tried to fix it by downloading Debian's Lenny libSoundTouch .deb file and then e

  • I just purchased a ringtone , how to get it to my phone?

    I just purchased a ringtone from itunes. how do  i get it to my iphone?

  • Is it possible conversion DataSource to byte[ ] ?

    Hello to all.... I�m a Student, and I can understand JMF, but I have this question. Sorry about my english, but I only need a few things.... 1. is it possible to convert a DataSource to byte[ ] ??, I need the DataSource in bytes. In other words the b