Backup problem with LMS 3.0 on Solaris

Hi All,
I'm encountering problems with LMS 3.0 when I try to do a backup. After you hit OK on the window that says "Do you want to backup now?", an error would pop up saying: "Enter a new directory name or ask the system administrator of the Ciscoworks Common Services server to make the directory accessible to user casuser", thus I cannot proceed with the backup process. When I do backup, my login privilege is admin. Even tried to do backup on the same partition as my CSCOpx directory but to no avail.
Appreciate your help on this guys. Our LMS 3.0 runs on Solaris platform. Thanks in advance.

Hi Joe,
Thanks for your prompt response. By the way, what is a casuser? Is he also one of the user that can be found on the Local User Setup on Common Services? The scenario here is that, I am not the one who installed the Ciscoworks LMS 3.0 on the client side, so I am not aware on how they did the installation procedure for the application. I remember assigning casuser password during installation on our other clients that has LMS 3.0.
Will the write access on the backup directory for the casuser be done by the Solaris root administrator?
Thanks for your help.

Similar Messages

  • Problem with application directories on JDS - Solaris 10 11/06 sparc

    I am running a fully patched JDS on a Sun Blade with Solaris 10 11/06 sparc.
    After installing, removing, and re-installing Sun Download Manager 2.0 (web start version) I am having problems with JDS application menus.
    I used File Manager (probably accessed through the This Computer Desktop icon) to move around directories under applications:///. This information is saved in ~/.gnome2/vfolders. Folders available from the Launch menu under Applications were all messed up, but I solved this problem by removing all contents of ~/.gnome2/vfolders and restarting JDS.
    Now, when I enter the This Computer icon on the Desktop, and click on the Applications icon in there, there is an extra Applications icon there that is not associated with any application and cannot be removed (when I try and trash it, I get an error saying something about "not on same file system"). Also, when I enter the Internet folder under Applications, there is an extra Internet icon in there that also cannot be removed. These extra folders are not seen when accessing the Applications menu from the Launch menu. How can I clean up these "bad" launchers, or folders, or whatever they are, that appear to exist only under the Applications directory accessible through This Computer (computer:///)?
    Thank you...

    Maybe the answer is here:
    http://docs.sun.com/app/docs/doc/819-0918/6n3aglfdl?l=en&a=view&q=location+of+applications-all-users
    To Add a Menu Using Menu Files
    To add a menu for all users, perform the following steps:
    1. Create a directory entry file for the item that you want to add. Create the directory entry file in the /usr/share/gnome/vfolders directory. For more information about directory entry files, see Directory Entry Files.
    2. Locate the vfolder information file for the location where you want to add the menu. For example, to add a menu to the Applications menu, locate the file /etc/gnome-vfs-2.0/vfolders/applications-all-users.vfolder-info.
    3. In the vfolder information file, add a <Folder> element for the new menu. For more information about vfolder information files, see Vfolders and Menus.
    The next time users log in, the menu is in the assigned location.

  • Problems with hp laserjet 4ml on solaris 7

    Hi out there,
    I`ve got a problem with a hp laserjet 4 ml on "solaris 7" (AXUS ultrasparc WSU1D/200):
    After I had installed the driver with the hp jetadmin-tool, it`s only
    possible to print as a root-user, as a normal user nothing happened, the printjob never reached the printer, but with the
    lpq-command I can see it in the printqueue. With "solaris 2.6" it worked fine. Thanks a lot.

    Hi,
    Check out the permissions for printer related directories and files.
    Regards,
    Dharani
    SlashSupport India Pvt Ltd.
    Hi out there,
    I`ve got a problem with a hp laserjet 4 ml on "solaris
    7" (AXUS ultrasparc WSU1D/200):
    After I had installed the driver with the hp
    jetadmin-tool, it`s only
    possible to print as a root-user, as a normal user
    nothing happened, the printjob never reached the
    printer, but with the
    lpq-command I can see it in the printqueue. With
    "solaris 2.6" it worked fine. Thanks a lot.

  • Backup Problem with Windows Server Backup

    Hello,
    we have problems with Windows Server Backup Feature.
    Our system is a Windows Server 2008 Standard. On the computer runs a SQL Server 2005.
    Since several days no backup can be carried out. We get the error message:
    - Error during a Volume Shadow Copy service operation. Detailed error: Failed to process the volume shadow copy: "0x800423F0".
    - Errors in the event log: For the started backup an error occured. The volume shadow copy operation  was not successful. Error code: "2155348129". Run the backup again after the problem was fixed.
    We have already tried to restart the services, uninstalled the Windows Server Backup Feature and reinstalled it, also we rebootet the server several times. Unfortunately, so far without success.
    What else can we do respectively where could be the problem?
    Kind regards
    Sven Otto
    KRK ComputerSysteme GmbH (Germany)

    Hi Sven,
    Please check if there a system partition that is created on the server. If so, assign a drive letter on the partition to check the results.
    For more detailed information, please refer to the article below:
    Volume Shadow Copy Error 0x800423f0 - writer error: inconsistent snapshot
    http://kb.backupassist.com/articles.php?aid=2995
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Backup Problem with only Production Server

    Hi all
    Here i have backup problem in only production server. In my tape drive device all schedule backup of Development  server and Quality Server and Production server . In this i get all backup in Development and Quality server, But in Production server backup was fail and not only one all backup is fail from last 2 days . So can u tell me what is the problem with my production server and how can i find it in production.
    And any hardware issue or OS issue is responsible for this.
    Please help me out.
    Thanks
    Keyur

    Hi,
    Can u pls post us the backup log? Also let us know ur product details like OS, SAP, DB version and also the backup tool(if any).
    Regards,
    Varadharajan M

  • Time Machine Backup Problem with OS X 10.9.4

    I am having a problem with the Time Machine backup on a MacBook Pro 2.6 running OS X 10.9.4.  What is happening is it starts the backup and then gets to a certain point and just freezes indefinitely at that point.  (Indefinitely meaning overnight >12 hrs)  I deleted the sparsebundle file and restarted the backup and it essentially freezes at the same point.  It's like there's a particular file it has an issue with.  Is there a way to tell what file it's backing up when it freezes so I can exclude it from the backup.  I initially thought it was a Time Capsule and backing up over the network issue.  I acquired a USB 3 Seagate drive and tried using it with the same result.  So, the issue has nothing to do with the Maverick network "qwerks" I've seen referenced.
    My initial backup size is about 250 GB.  I've pared that back by excluding the Parallels Virtual Machines on the hard drive and my IPhoto Library.  That scales the back up size to about 55 GB.   Before I did the file exclusion it was hanging up at 1.83 GB out of ~250GB.  Now it's hanging up at 1.82 GB out of ~55 GB.  So it's as if it is reaching some file it has an issue with and stopping.
    Any thoughts?

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
    Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
    CLEAR THE WORD "Starting" FROM THE TEXT FIELD
    so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Catalog backup problems with PSE 11

    Hi,
    I'm having terrible problems trying to backup my catalog to an external hard drive.
    My PC is running Windows 7 with 8 GB of internal memory. My external hard drive is formatted to FAT 32 and has 130GB of spare capacity. My catalog is 45GB.
    I have previously backed up the the catalog without any problems but can't remember if I did this before I upgraded to PSE 11.
    I initially tried doing a full backup but got an error part way through writing the 'breeze' data. Having read that the breeze data was only used for face recognition, I deleted the remaining breeze data files and tried again.
    I then encountered a problem when writing some of my early .jpg files. I couldn't see any obvious problem with these but tried removing them and runnning the back up again.
    This time it got a bit further but hung up on some .mpg files.
    I removed all video files and tried again.
    This time it got up to over 60% complete but it then hung up on some early files which had a 'description' 2002 rather than a straight date name to the file. I thought that there might be a problem with file names including ' 's ', so removed these and tried again.
    I then tried running Catalog 'optimize' and 'repair' (I didn't tick 'the re-index visual similarity data').
    I eventually got up to over 65% complete but couldn't get the backup to go past my 2007 files no matter what files I removed.
    I then tried doing an incremental backup using a Catalog file that I had created in 2011. This backup failed with 'an error encountered while writing.....WaldoData\waldo.cache'
    I now don't know what to try! Any suggestions would be greatly appreciated.
    FYI, looking at the backup Catalog files that I have previously created, it appears that only the first contains all the images from whole catalog with an equal number of .xml files.
    Two others which I created (which I can't remember were full or incremental backups) only have some of the images. I'm sure that this can't be right.
    I presume that for an intial backup the .xml files should run from B0000001 to Bnnnnnnn; the .jpg/.mpg/ etc from Bnnnnnnn+1 to B 2(nnnnnnn) and that when one runs an incremental back up the new .xml files are added from B2(nnnnnnn)+1 to B2(nnnnnnnn)+(mmmm) and the image files continuing for a further (mmmm). Is this correct?
    Otherwise what should one be seeing?
    Regards
    Mike

    Thank you for your information about my problem with PSE 11. I have since tried the programme on 2 different computers and it works fine. Seems like the problem is with my computer although my old PSE 10 works okay. I'd appreciate any ideas about what could be wrong with my computer to cause my photos to break up into various segments which don't join together particularly when I move them into 'before and after horizontal' or '......vertical' and even when zooming them. ( HP Pavilion Elite) Vista Ultimate.
    Regards,
    Stervogel.

  • Time machine backup problem with upgrade to Lion - Choose Backup Disk button non-existant

    Hi, I just upgraded my mac mini to Lion and have encountered a problem with by Time Machine. It no longer sees my networked drive for back up. So, I followed the instructions on this site http://code.stephenmorley.org/articles/time-machine-on-a-network-drive/ and get to item 6b. and have a problem I have not been able to sort out. Instead of the button "Choose Backup Disk" on the Time Machine window, I have a button "Select Disk" with a button "Options" under it. When I click "Select Disk" I get a window promtping me to "Set Up Other Time Capsule" and clicking that takes me to a window for AirPort Utility. (screen shot )
    Anyone know why I don't have the right button for starters and why I can't access any drives on my machine at all? I followed the web instructions on the site I mention above because initially I had an error about AFP, so suspected the drive set up here (it is my work) is incompatible.
    (The only IT guy we have is on vacation for 2 weeks and then I am on vacation for 2 weeks and can't wait a month in order to back up! Thought I would try here to see if I can get answers before I am away.)
    Thanks in advance!

    i had a similar problem when I first installed Lion last year.  It seems that some network NAS products need a firmware update to work with Lion.  I contacted the manufacturer and they helped me out.  I am using a Synology NAS system.  Problem solved after firmware update. 

  • Time machine backup problem with company backup.

    I have serious problems with making backups of our company computers by Time Machine.
    We have Synology NAS with Time Machine Support. When I made setting for Time Machine backups (users, shares, quotas, etc. ) ewerything worked fine. All Time machines uses one directory, that appears on the network like a Time capsule. Machines have their own accounts with quotas etc. After a few days started many problems. Some Time Machines has missed their target sparsebundles and unsuccessfully tried write into some others. After Time Machine restart and new manual setting problem persisting. Only successfull solution is complete remove all affected sparsebundles (miss all older backups) and make new ones. This problems appears on many different computers with various OSX version 10.6 - 10.8.
    Can you help me with this problem?

    I have used OS X Server on an Xserve and gained the impression that it did little that OS X would not do. Earlier versions had a fairly easy to use GUI but as it developed it became more tedious and unreliable than using OS X on the same hardware. It was far from cheap for unlimited users even with educational discounts.
    At one time OS X Server was more advanced than the same version number OS X - about half a version ahead.
    I am not saying that it may not be faster to set up if you have had previous OS X Server experience but it is a steep learning curve after only OS X experience. The average user would get there faster with one of the many tutorials on the web about using OS X as a server.
    At one time OS X Server had a security bug in that it confused FTP root with machine root under some conditions leaving the whole disk open to the public.

  • Backup problem with Time Capsule over Router

    Hello fellas,
    I am facing a back up problem with my TC(2TB) with Time machine. When I try to back up it gets stuck at "preparing backup". However when i directly connect to it via its own wifi, everything works like a charm. I even erased older back ups and created a new one. When I, however, switch back to the router setting (TC connected to a Router and me connecting over wifi) I still do see the erased backup on the right side. When I try accessing them, I get a black window where I should be seen a mirror of the desktop. I can manually (over Finder) add and erase files in the TC. The TC does pick IP and is active.
    I did verify and repair the TC.(Permission tab was grey)
    OS 10.9.5
    TC version: 7.7.3
    Hope you guys can help me.

    Mavericks has a lot of issues with networking.. And it effects TM and the TC more than most things.
    Apple finally fessed up there was some issues.
    OS X Mavericks: Time Machine problems
    Let me recommend you follow exactly the same list as in this thread.
    I just updated Safari 7.1 and OS X Mavericks 10.9.5 now my Time Machine is not backing up and I don't know how to fix it.
    In your situation there is a couple of other things to add.
    Make sure IPv6 is set to link-local only.
    I am not sure how your router is handling ipv6 or bonjour for that matter.. both are necessary to have TM work.
    If that doesn't solve it..
    Use Finder to force the connection to the TC to AFP protocol.
    From top menu, Go, Connect to Server.
    Type AFP://TCgenx.local (where you replace TCgenx with your nice new short name). local is the default domain in the TC and it can help to specify as your router is probably using a different domain.
    Even better is to use the TC IP address.. but it has to be static.. so you will need to set it by dhcp reservation in the main router.
    AFP://192.168.0.100 (replace with the actual TC IP you can get it from the summary screen in airport utility but must be static).
    If you still have issues post back more details.
    What router are you using make and model?
    If it is not apple compatible it may simply never work.. some routers do not handle specific apple protocols like airplay or bonjour and this affects how it works with TM.

  • Time Machine backup problems with firewire 800 since Mavericks

    Since I installed Mavericks about a week ago, I have had problems with TM not working with my LaCie external drive. At best, it would not back up when the mac was awakened from sleep mode and in use.  When I would open time machine preferences, I would see the "preparing for back up" prompt that would last forever. Not only was it doing that, I have found that it would freeze my mac. I figured this out when I was not able to get my mac to respond from the login screen. It was basically frozen and couldn't log on.  I noticed the back up drive light flickering but nothing would happen even with waiting a long time. I finally figured out that shutting off the TM EHD would unfreeze the mac and it would start functioning normal again. This was happening with my external HD daisy chained to another external drive that contains my iPhoto, iMovie and Itunes files. That drive was also connected to the mac using firewire 800. I tried many different configurations, switched the order the drives were daisy chained, tried different cables and even directly connected the TM drive with firewire 800 to the mac, but the problems still persisted. The strange thing is that when I connect the TM drive through USB, it works flawlesly and no hanging up of the computer. Thats what Ive been forced to do. I have my other EHD connected directly through firewire 800 and it works fine. I only have one firewire 800 port, and since it works fine with my other LaCie drive, it makes me think its not the port or macs hardware? I can only guess this is a Time Machine issue or something wrong with my TM drive?  I have been in contact with LaCie and given them all these details but I have not heard back yet on what they feel the problem is. I thought I would post this to see if anyone else had some experience with this problem.

    Forgot to mention I did that. Completely erased and reformatted HD and then reconnected to TM. Didn't help. I did have the mac hang up while installing Mavericks and had to eventually shut off the external drive. It did that to me the firs time I tried to install Mavericks and I lost all my data because it did a clean install after that. I had another back up on CCC so I just restored from there. This time the update to Mavericks transferred my data. I have had TM hang up my mac in the past on occasion, but I was always able to shut down the drive and then the mac would return to normal. Perhaps I should try to erase and reformat again?

  • Problems with accept () system call in Solaris 10

    We are doing some prototyping in Solaris 10/Zones using TCP sockets and have encountered the problem the "accept" system call in Solaris 10 always seem to return immediately without waiting for clients to connect to it. The same program works fine under Solaris 9 without any problems.
    So in the following call:
    ssock = accept( sockfd, (struct sockaddr*)bind_address, &alen );
    if( ssock < 0 )
    printf( "Accept failed: ...\n" );
    the program always prints "accept failed: " continuously. Is this a known issue?

    The problem only occurs when we use INADDR_ANY to bind a socket. The program works as expected when we use real as well as virtual IP address configured for an interface on any Solaris Zone. When we use INADDR_ANY, error number is 14 (EFAULT, Bad Address).
    Just wondering if we need to make any configuration changes in order to allow INADDR_ANY to work.

  • Problems with LMS 2.6 backup (error 1226)

    Hi.
    I am tryinng to take a backup from LMS 2.6 in a Windows 2003 system. The backup appears to finish, and some files are generated in the backup directory, including one named filebackup.tar, wich seems to be the RME database backup, but the log file states an error: ERROR(1226): Database rmengdb backup failed. I can't find out what is causing this. I am taking this backup for migration purposes.
    Thanks in advance.

    Thank you for your reply.
    Here goes the log for the latest backup attempt.
    Backup to 'W:/backup_new2' started at: [Fri Jun 18 15:14:30 2010]
    Archiving the contents of the following directories into W:/backup_new2\0\campus\filebackup.tar
    W:/PROGRA~1/CSCOpx/campus/etc/cwsi\DeviceDiscovery.properties
    W:/PROGRA~1/CSCOpx/campus/etc/cwsi\ANIServer.properties
    W:/PROGRA~1/CSCOpx/campus/etc/cwsi\discoverysnmp.conf
    W:/PROGRA~1/CSCOpx/campus/etc/cwsi\datacollectionsnmp.conf
    W:/PROGRA~1/CSCOpx/campus/etc/cwsi\Snmpv3EngineParam.txt
    W:/PROGRA~1/CSCOpx/campus/etc/cwsi\UTSnmpv3EngineParam.txt
    W:/PROGRA~1/CSCOpx/campus/etc/cwsi/users
    W:/PROGRA~1/CSCOpx/campus/etc/cwsi/archives
    W:/PROGRA~1/CSCOpx/campus/etc/users
    W:/PROGRA~1/CSCOpx/campus/etc/cwsi/ReportArchives
    W:/PROGRA~1/CSCOpx/htdocs/campus/maps
    /cygdrive/w/PROGRA~1/CSCOpx/bin/tar: Removing leading `/' from member names
    Archiving the contents of the following directories into W:/backup_new2\0\cmf\filebackup.tar
    W:/PROGRA~1/CSCOpx/lib/classpath/com/cisco/nm/cmf/servlet\cwpass
    W:/PROGRA~1/CSCOpx/lib/classpath\sso.properties
    W:/PROGRA~1/CSCOpx/lib/classpath/com/cisco/nm/dcr\dcr.ini
    W:/PROGRA~1/CSCOpx/MDC/Apache/conf/ssl
    W:/PROGRA~1/CSCOpx/www/classpath/com/cisco/nm/cmf/security\secret.dat
    W:/PROGRA~1/CSCOpx/www/classpath/com/cisco/nm/cmf/security/jaas\JaasConfig.xml
    W:/PROGRA~1/CSCOpx/www/classpath/com/cisco/nm/cmf/security/jaas\JaasConfigModule
    W:/PROGRA~1/CSCOpx/www/classpath/com/cisco/nm/xms/psu/maps
    W:/PROGRA~1/CSCOpx/objects/data/cmf/cmic/registered-templates
    W:/PROGRA~1/CSCOpx/objects/data/cmf/cmic\cmic.xsd
    W:/PROGRA~1/CSCOpx/conf\logstat.conf
    W:/PROGRA~1/CSCOpx/etc/licenses
    W:/PROGRA~1/CSCOpx/MDC/etc\regdaemon.xml
    W:/PROGRA~1/CSCOpx/lib/classpath\comUser.dat
    W:/PROGRA~1/CSCOpx/lib/classpath\ccoUser.dat
    W:/PROGRA~1/CSCOpx/lib/classpath\proxy.properties
    /cygdrive/w/PROGRA~1/CSCOpx/bin/tar: Removing leading `/' from member names
    Archiving the contents of the following directories into W:/backup_new2\0\dfm\filebackup.tar
    W:/PROGRA~1/CSCOpx/objects/smarts/conf
    W:/PROGRA~1/CSCOpx/objects/smarts/local/conf
    W:/PROGRA~1/CSCOpx/objects/smarts/local/repos
    W:/PROGRA~1/CSCOpx/objects/smarts/local/logs
    W:/PROGRA~1/CSCOpx/setup\dfm.info
    /cygdrive/w/PROGRA~1/CSCOpx/bin/tar: Removing leading `/' from member names
    Archiving the contents of the following directories into W:/backup_new2\0\rmeng\filebackup.tar
    W:/PROGRA~1/CSCOpx/files/rme/jobs/swim
    W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/conf/swim/kb
    W:/PROGRA~1/CSCOpx/files/rme/swim/advdistinput
    W:/PROGRA~1/CSCOpx/files/rme/jobs/syslog
    W:/PROGRA~1/CSCOpx/files/scripts/syslog
    W:/PROGRA~1/CSCOpx/files/rme/syslog
    W:/PROGRA~1/CSCOpx/files/rme/jobs/cda
    W:/PROGRA~1/CSCOpx/files/rme/jobs/cctool/jobs
    W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/cctool/scase\SmartCase.properties
    W:/PROGRA~1/CSCOpx/files/rme/jobs/bugtool/jobs
    W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/bugtool\Bugtool.properties
    W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/csc/data\Collector.properties
    W:/PROGRA~1/CSCOpx/files/rme/cfgedit
    W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/config/cfgedit\ConfigEditor.properties
    W:/PROGRA~1/CSCOpx/setup\rme.info
    W:/PROGRA~1/CSCOpx/files/rme/repository
    W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/repository/common\repository.properties
    W:/PROGRA~1/CSCOpx/files/rme/jobs/NetShow
    W:/PROGRA~1/CSCOpx/files/rme/NetShow/ShowCommandArchive
    W:/PROGRA~1/CSCOpx/files/rme/jobs/inventory/reports/archives
    W:/PROGRA~1/CSCOpx/files/rme/jobs/inventory/reports/jobs
    W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/fcss/data\TimeZone.lst
    W:/PROGRA~1/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/util/logger\rmelog.cfg
    W:/PROGRA~1/CSCOpx/files/rme/dcma
    W:/PROGRA~1/CSCOpx/files/rme/jobs/ArchiveMgmt
    W:/PROGRA~1/CSCOpx/files/rme/jobs/ArchivePoller
    W:/PROGRA~1/CSCOpx/files/rme/jobs/ArchivePurge
    W:/PROGRA~1/CSCOpx/files/rme/jobs/ArchiveUpdate
    W:/PROGRA~1/CSCOpx/files/rme/jobs/cas
    W:/PROGRA~1/CSCOpx/files/rme/changeaudit
    W:/PROGRA~1/CSCOpx/files/scripts/changeaudit
    W:/PROGRA~1/CSCOpx/files/rme/jobs/NetConfigJob
    W:/PROGRA~1/CSCOpx/files/rme/jobs/cri/purgejobs
    W:/PROGRA~1/CSCOpx/files/rme/cri/archives
    /cygdrive/w/PROGRA~1/CSCOpx/bin/tar: Removing leading `/' from member names
    Backing up database aniDb:Adaptive Server Anywhere Command File Hiding Utility Version 9.0.0.1383
    Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
    (68183 of 68183 pages, 100% complete)
    (2 of 2 pages, 100% complete)
    Database backup completed
    Command file created using Adaptive Server Anywhere Command File Hiding Utility.
    Adaptive Server Anywhere Command File Hiding Utility Version 9.0.0.1383
    Adaptive Server Anywhere Validation Utility Version 9.0.0.1383
    No errors reported
    Command file created using Adaptive Server Anywhere Command File Hiding Utility.
    Backing up database rmengdb:Adaptive Server Anywhere Command File Hiding Utility Version 9.0.0.1383
    Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
    Database backup failed
    Database backup not started
    Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
    Database backup failed
    Database backup not started
    Backup rmeng to W:/backup_new2\0\rmeng\database\rmeng.db failed. Retry backup database rmeng
    Adaptive Server Anywhere Command File Hiding Utility Version 9.0.0.1383
    Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
    Database backup failed
    Database backup not started
    Adaptive Server Anywhere Backup Utility Version 9.0.0.1383
    Database backup failed
    Database backup not started
    Backup rmeng to W:/backup_new2\0\rmeng\database\rmeng.db failed second time.
    ERROR(1226): Database rmengdb backup failed and . Check the log file for information.
    Backup failed: 2010/06/18 20:25:28

  • Backup problems with external hard drive

    I bought a WD passport external hard drive and copied my itunes library onto a file there. I re-set the location of the library on itunes to the drive on the external hard drive. So far I have not deleted anything from my computer hard drive. However, when I am in itunes and click onto a song, nothing comes out of my speakers. Everything looks normal, as if the track is playing, but nothing is happening. I tried buying a new track off of itunes online, downloaded it, and installed it on my ipod; it plays fine, on my ipod, but will not play on the computer. Something is obviously wrong, but I can't figure out what has happened. Any help out there?
    Thanks!
    Delany

    It sounds to me like your iMac is on it's last legs....at least the internal hard drive. If you can't make a new Time Machine backup I would advise you replace your iMac as soon as possible.
    Assuming your three-week old backup is sound you should have no problems moving everything over to a new Mac. I would recommend you use the Setup Assistant that appears when you start up the new Mac (and note: It only appears the first time you start the new Mac; you can move everything over later on via Migration Assistant, but you may see issues with accounts if you opt for that route).
    I don't think you need the Genius Desk for Setup Assistant. You only have to power up the new iMac, answer a few questions....select "....From Another Disk..." When it asks how you want to move everything over....connect up your Iomega external drive...and wait for it to finish. (Could take several hours depending on the amount of data you're moving).
    A couple of notes:
    1.  If your Iomega is a Firewire drive you'll need a Firewire to Thunderbolt adapter to connect it to your new iMac.
    2.  If you need to load CDs or DVDs remember the new iMacs don't contain an optical drive. You would need to get an Apple SuperDrive or third part external burner if you need that functionality.
    I'm puzzled by the comment made in Seventy One's post questioning the reliability of the new iMacs. I upgraded from a 24" early 2008 model to a 27" model and everything works flawlessly. I hardly ever see the beachball anymore.

  • Backup Problem with Firmware Change

    *I'm running Windows Vista with my iPod Touch 2G.
    I just downgraded my firmware from 3.1.1 to 3.0 but now when I try to backup my old iPod backup it tells me it cannot backup the data because the (recently downgraded firmware) software is too old.
    Is there a way to backup my old applications and music without sticking with 3.1.1 firmware?
    Or is the only option putting my apps back manually onto my iPod? I had both my apps and my music backed up before I reverted to 3.0 firmware.
    Thanks for your time in advance!

    Just cancel it. its just downloading and not installing to phone yet so no harm will happen. Something on your computer is creating problems for your download. Most likely the AV and firewall software of the LAN settings.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

Maybe you are looking for

  • Cr2 files will not open in cs6

    I am running os10.6.8 and recently upgraged to cs6 from cs5. I have checked for software updates and my version is current. when I (attempt) to view in bridge or try and open cr2 files in the latest photoshop it will not allow. I can only see the cr2

  • How to represent a tree (like file system dirs) in object?

    I am parsing a dynamic set of nodes at runtime. The nodes below a "known" node are all dynamic, in that they can be any number of nodes at any number of depth. I am basically doing what DOM does, in that I want to take these nodes below the "known" n

  • Iweb 08 crashes

    I have been experiencing crashes, over and over with this software. I've created a Quicktime gallery using the photo gallery template. There are about 250 files there so far. What happens is that I place the movies into the template, save it and uplo

  • Are the prices listed in US$, Canadian dollars or Pesos?

    The price on the apple website for the book says the cost for a book is 29.99$ for a 20 page book. Fine, but there's nothing indicating surrency. I went to Apple.ca and all it does is link back to the US site. So how much is it for me? Would it be be

  • XML Processing Instructions

    Hi, I have two questions about how the XML class in AS3 works. First, does the XML class care about the initial processing instruction when created from a string like this?: <?xml version="1.0" encoding="UTF-8" ?> <painting>   <img src="madonna.jpg"