Backup/restore a system that has 2 OS installed

Hello Guys
I have 2 OS –both are windows XP- installed on a machine on 2 different partitions
Using Rescue and Recovery, I created a backup inside OS number 1,
I tried to restore the backup, but unfortunately, Rescue and Recovery restored only one OS(and didn’t restore the second OS)
 So my question is:  how can I backup/restore a system that has 2 OS installed
Thanks

Dear Sir
I am a graduate in computer science engineering .For
the past few months I had training in java. There is
serious doubt that has arisen & no body in my contact
has the answer for it.Sounds interesting.
My doubt is that can JVM be installed in a system that
has only OS- DOSOS-DOS ? Is that a variant on the microsoft DOS (like e.g. DrDOS).
1)     If yes then
?     Why cant sun Microsystems starts developing a well
secure OS on that base like Microsoft did.They did, only microsoft failed and Sun worked it out nicely with Solaris (aka SunOS) which is a UNIX variant (which DOS isn't).
?     Can applet be run (or developed) in a purely DOS
based systemYou can develop them, just not run or compile them ;-)
>
2)     If not then
?     Why java is said to be platform independent.Because it is, the specs are out there, you're free to write a JVM for DOS (I'd suggest version 6.22).
Hope that my simple doubts will be cleared through tech personals.If those are doubts about a language I'd see you need to straighten out your prioritiets.
Tech personals? Are those personal advertisements for technical dating or something?
>
Thanking you
Yours sincerely
Sajeev varghese
([email protected])
No problem.
p.s. to other guy that posted that IBM wrote MsDOS (aka DOS, the most widely spread version, which I'm assuming we're talking about), no they didn't, microsoft did, that's where Bill Gates got his money with.
IBM had it's own variant and was pushing the PC hardware market (the ancestors of our pc's were either IBM or IBM compatible).

Similar Messages

  • Identify USAGE TYPE that has been installed in the system

    Hi All,
    I have a newly upgraded BI system. I need to check what are all the USAGE types that has been installed in the system. How to verify the same (without asking the basis person). Is there any system parameter or transaction which would give the usage type installed.
    Points would be assigned for useful answers.
    Thanks,
    Vidhya.A

    Hi Vidhya,
    In BI the designtime and runtime of webtemplates use BI-JAVA usuage type.similarly for Formatted reporting too it uses BI-JAVA.see if you can successfully create a new webtemplate and can execute it,if you can then they had deployed dual stack in ur system.u can also check in Tcode SICF to see if web services are on.let me know if that helps
    Regards
    Chandru

  • What is the latest operating system that I can install on my macmini 1,1?  it has an intel core duo and 2gb memory.

    what is the latest operating system that I can install on my mac mini 1,1?  it has an intel core duo and 2gb memory. Current osx is 10.4.11.

    Mac OS X 10.6.8.
    (63055)

  • HT1212 how do u restore an iPod that has been disabled and has never been connected to the computer

    How do i restore an ipod that has been disabled and has never been conected to itunes

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • I just bought a used XP Home Edition program that has been installed before. Will I be able to install this again on my computer or is it only a one time use software? I have the Product Key and CD.

    I just bought a used XP Home Edition software program that has been installed before. I have the Product Key and installation disc. Will I be able to install it on my own computer? Or, is this software (purchased retail) a one time install? Please advise.

    Depends on many things.
    If your system is Lion, XP can only be installed under VM.  BootCamp in Lion only accepts Windows 7.
    As to "one use only", if you are referring to OEM ...
    A reinstall can trigger the OS to "not register" because "a major component serial number or MAC (the network MAC chip) address" has changed, according to MS databases.
    But you can call MS to get the key reactivated, usually/sometimes.  It is worth a try, at least, before spending money on another Windows 7 package.  But this discussion should end *now* at "maybe" as it treads close to matters that forum Terms-of-Use would prefer we not discuss.

  • How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

    How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

    Hi Bill,
    Thank you for replying back...Yes, I was actually asking how do you set the default gateway address on the DHCP server?,
    I believe I got the answer below:
    To configure the DHCP default gateway option Click Start, point to Administrative Tools and then click DHCP. In the console tree, expand the applicable DHCP server, expand IPv4, and then right-click Scope Options Click Configure Options, check 003
    Router, type the applicable Server name and IP address, and then click OK.
    Thank you

  • How can i copy a picture that has been installed with the flash player

    how can i copy a picture that has been installed using the flash player

    You can't. You can take a screen cap of it, but the container doesn't allow access to the individual images used in a SWF or FLV.

  • Is there a shelf stereo system that has a dock that works with the 4th Generation Touch?

    Is there a Shelf Stereo system that has a dock that works with the 4th Generation I Pod Touch?

    Did you already check the Apple Store online? http://store.apple.com/us/browse/home/shop_ipod/ipod_accessories/speakers?mco=Mj A4ODE3NDA

  • Ok....I have a 2012 MBP that has Yosemiti installed.  The airplay works from iTunes, but when I try to mirror from the desktop I get the "no device detected" message.  Airplay on all of my other devices work fine.  Has anyone else had this issue?

    Ok....I have a 2012 MBP that has Yosemiti installed.  The airplay works from iTunes, but when I try to mirror from the desktop I get the "no device detected" message.  Airplay on all of my other devices work fine.  Has anyone else had this issue?

    Hey Marco'96,
    Welcome to the Apple Support Communities! I understand that you are experiencing issues with AirPlay mirroring in OS X to your Apple TV. The following resource includes helpful troubleshooting steps towards the end of the article, which may resolve your issue:
    About AirPlay Mirroring in OS X - Apple Support
    http://support.apple.com/HT201343
    Thanks,
    Matt M.

  • How do you resolve error code 36 when trying to restore an iPad that has been reset to original settings?

    How do you resolve error code 36 when trying to restore an iPad that has been reset to original settings?

    MB-
    As far as I can tell, Error Code 36 is an "I/O Error".  It may mean you have a bad USB cable between the iPad and your computer, or the cable was not plugged in firmly.
    See if this helps with your Restore:  <iOS:  Unable to Update or Restore>.
    Fred

  • Any ideas for starting mssql in a windows live environment from a drive that has windows installed

    This will probably be a strange question,
    If you have a server that has mssql and you boot the server into a live windows environment ( loaded into memory on the server  much like a live distro of linux.) is there any way to start mssql in that live environment?  im guessing here, maybe
    load the hive, copy some things to the live environment?
    this can be done with linux and mysql and any other application/software installed in linux without issue. i was wondering if there was something similar that could be done in a windows live environment.
    thanks for reading.

    Hi anita,
    I’m writing to follow up with you on this post. Was the problem resolved? If not, as other post, you need to explain the detail about your issue about starting SQL Server.
     What is a live windows environment, in addition, we need to verify if you want to start SQL Server Service after installing SQL Server instance in your Windows Operation System.
    Usually, if you start SQL Server service, you can use SQL Server Configuration Manager, SQL Server Management Studio, net commands from a command prompt, Transact-SQL, or PowerShell. There is an article about how to start , stop, pause, resume, or restart
    the Database Engine and so on.
    http://msdn.microsoft.com/en-us/library/hh403394.aspx
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • HT1212 how can i restore a ipod that has been disabled with a different computer

    how can i restore a ipod touch that has been disabled with a different computer

    Restore it in Recovery Mode: http://support.apple.com/kb/HT1808

  • Firefox will not recognize java plugin that has been installed and worked 1 day ago.

    I have an IMac with OSX 10.5.8, Firefox 5.0, One day ago it worked fine, today when going to a specific site that requires Java, Firefox will not recognize that Java is installed. I checked for updates and there are none. Java is installed and the site works fine with Safari, which requires Java as well. How can i get Firefox to recognize Java installation.

    Apple has removed support for the Java Plugin2 with the latest Java Update 10 for OS X 10.5 Java version, so the Java plugin is no longer available for Firefox versions and other browsers like Google Chrome that require the Java Plugin2.
    The Java Plugin2 plugin is still there, but he softlink to it has been removed with this update, so Firefox doesn't find the plugin.
    There will be fix for this in the next release (Firefox 5.0.1 or 6), so that Firefox will find the plugin again.
    I don't know if all Java applets will still be working on OS X 10.5 with that JP2 plugin (Apple recommends updating to OS X 10.6 for OS X 10.5 users with an Intel Mac).
    * [/questions/844734]
    * [/forums/contributors/707078]

  • Import of transport from a system that has same name as target system

    Hi,
    We have an ECC6.0 SPS10 system with SID as "RD2" and the transport
    number range on this system is from RD2K900000 to RD2K999999.
    If we import a transport into our ECC system(SID is RD2)from an
    external system(vendor system) which has the same SID (RD2) and this
    external system transport number is RD2K9A0505, does the transprot
    number range change in our system?
    After the import of the transport(RD2K9A0505) into our system, if we
    create new transport request, what would be the transport number
    assigned to it?
    will it change to RD2K9AXXXX or will it be the same number range it has
    before as RD2K9XXXXX.?
    Appreciate your answers.
    Thanks,
    Vinod.

    Hi,
    This was very unusual to see, anyways let me put my answers
    1. the systems has to be configured in landscape to import the transport requests, and in landscape no two systems can have same SID.
    2. The transport system has a specific order tht need to be followed, DEV>QAS>PRD, so you did not mentioned the scenario here(please put doenthe scenario if you are importing from DEV of vendor to your DEV), and the SP level and kernel and everything need to be maintained on same level between source and Target else there is possibility for import error or chnages donot meet the criteria in target.
    3. Usually when you do imports between the DEV and QAS or PRD the Change request numbers in DEV are usually high but by importing this into QAS the number range for CR will not change,( here the SID are different). In your case i was uncertain since SID are same and number range format is different.
    4. Kindly note that SAP recommends no two SID in landscape can be same, so your source system should be from different landscape where transports can be done only through manually from OS level using tp command, and im in doubt wether tp can recognize the change request that was different in format as a change request number.
    Regards....
    Edited by: Sita Rr Uppalapati on Dec 8, 2008 8:32 PM
    Edited by: Sita Rr Uppalapati on Dec 8, 2008 8:34 PM

  • Restoring an app that has been hidden by Show Desktop in Windows 7

    Does anyone know if a way to restore/unhide an AIR app that has been hidden by the Show Desktop command in Wndows 7? I used AutoHotKey to remap the Windows-D shortcut but it still does not capture the Show Desktop button in the Taskbar. I thought if there was a way that an AIR app could know that it had been hidden and restore itself I could use a Timer or create an eventListener to handle it.
    I am trying to replicate the old Active Desktop of XP and the goal is to make sure that the app remains on the desktop at all times. This is the last hurtle!

    Does anyone know if a way to restore/unhide an AIR app that has been hidden by the Show Desktop command in Wndows 7? I used AutoHotKey to remap the Windows-D shortcut but it still does not capture the Show Desktop button in the Taskbar. I thought if there was a way that an AIR app could know that it had been hidden and restore itself I could use a Timer or create an eventListener to handle it.
    I am trying to replicate the old Active Desktop of XP and the goal is to make sure that the app remains on the desktop at all times. This is the last hurtle!

Maybe you are looking for

  • Create text editable PDF for client to edit in Adobe Reader

    I would like to create a PDF from either Illustrator or InDesign so that my client can edit just the text in the document using Adobe Reader as necessary (for flyers and business cards etc). I want to set the file up in Illustrator or InDesign so all

  • Reject Notifications not appearing in list

    Hi Gurus, I've enabled AME's for payable Invoice approval. It is working fine but when any user reject the invoice then it is not sending any return reject notification to previous user who has submitted. Is there anything do I need to enable for tri

  • IWeb not updating site changes, even overnight!

    Hi iWeb-experts, Having problems with iWeb and have waded through the site and other forums and yet to find a solution. Site is marccheckley.com. I successfully moved the site before MobileMe closed shop and made updates to the site a few months back

  • Illustrator show not enough memory to open file,

    but the file is only under 200k, my PC config is 16G Win 7, 1TB HD

  • Exporting to QuickTime from Premiere Elements 9.0

    A couple of years ago, there was an internet post by a guy named John Cloudman about export settings for high-quality videos for web sharing. There are a few parameters that he changed in the default export that produced very high quality videos.  I