Bad adapter engine configuration - File Sender scenery doesn't work

In file sender scenery, the adapter doesnu2019t pass any message to the Integration Engine.
When I take a look to the communication channel monitoring it shows the channel with status OK (Green). But when I look into the audit log of the incoming message I see the following error:
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText:   ErrorStack: Error in sender agreement for party , service VLTEST, interface namespace urn:damm.es:vialactea:logistica, interface oa_SimpleLine No sender agreement found for , , , , ,
The sender agreement exists in the Directory and the status of the cache is OK.
But in the Message Data I see this End Point URL: http://asrmd:8082/sap/xi/engine/?type=entry
This is adapter is attached to a development system instance number 80 and the port of the above URL is a reference to the TEST system instance number 82. I investigate this issue but I canu2019t find where the miss-configuration is causing this bad End Point.
Have anybody an idea about this problem. Itu2019s the first time I found this kind of miss-configuration.
All other adapters are working fine. The file receiver adapter is working fine too.
Thanks in advanced.

Hi Sergi,
Now is clear. Sorry but I didn´t see your posts properly. I didn't move the cross bar until the final.
So now I change my point of view.
Go to Runtime Workbech --> Component Monitoring --> Integration Engine --> Test Message. Which URL is displayed here? is it right?
If don't, effectively you have wrong configured your URL of the Integration Engine.
Go to SLD --> Business Systems --> Select your XI business System. At the Integration Configuration tag check the URL, if it is wrong, change it and save the changes. Remember that the rol must be Integration Server.
Refresh the caches.
Hope it is usefull.
Carlos

Similar Messages

  • Adapter file sender -archiving doesn't work sometimes

    Hi everybody,
    We are on PI 7.1 on windows 2008 server  64 bits
    I have something strange..
    I developped a few time ago a flow
    File adapter => PI => SAP R/3 RFC
    When the adapter file sender pick up the file, he should normally archive them.
    The archived file is well created in a separated directory with an addition of timestamp and the normal process after is the deletion of original file.
    The strange thing happens during the last operation. Sometimes it is deleted and sometimes it is not deleted. .
    In the second case, the adapter file  will retreat it after a few time => it generates an error of duplicate key   (Of course in PI has already treated it). That case can happen more than 10 times until the delete of the file works.
    I applied many other flows with the same principle but with other directories (on the same server) and that happens with that only one.
    Does somebody have an idea what could be the origin of that strange behavior?
    All the ideas are welcome.
    Thank you in advance for your help.
    E. Koralewski

    When the file fails to be archived, the transaction should be rolled back (therefore, message wouldn`t be generated). Please apply both notes below and check if the issue persists.
    [Note 1549500 - XPI File Adapter exactly once procedure fails|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1549500]
    [Note 1361305 - File sender adapter generates duplicate message IDs.|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1361305]

  • Sharepoint 2013 - File Send option doesn't work

    Hello,
    I have an issue with File Send option in SP 2013, here is my scenario
    Choose a file that i want to send
    Click Send To - in Files (Ribbon)
    Fill the destination path that i want to copy (test successfully)
    Click 'OK' button
    And here is my result, i always received the empty messagebox as below
    Kind regards,
    Binh Duong

    Ok, I see you were not trying to mail it, you're trying to send it to another library
    it could be the URL is too long. there is a 256 character limit, and maybe the URL that is getting generated exceeds the limit.
    Here are a couple links about the limit
    https://technet.microsoft.com/en-us/library/ff919564(v=office.14).aspx
    https://support.microsoft.com/kb/894630/en-us?p=1&wa=wsignin1.0
    Stacy Simpkins | MCSE SharePoint | www.sharepointpapa.com

  • In my Scenario i want to configure file sender Adapter.But in Parameters

    In my Scenario i want to configure file sender Adapter.But in Parameters, for Adapter Engine  Column It Shows blank,Integration Server will not appear for that column.Finally It Gives Error- Adapter Engine is not Defined.
    What is the Reason for this...
    Please Clarify ASAP...
    Thanks..

    Hi Chiru,
          It seems that you may have missed some steps while doing the configuration. After doing all the activities in SLD and IR and activating all the components created in IR it should work.
          Plz check that you have selected as Adapter Type as File and correct namepace in the next field. Transport Protocol as File System (NFS), Message Protocol as File and I hope after all these information you will get Integration Server in the Adapter Engine field.
        If the problem persists please revert back.
    Warm Regards,
    Subhasha Ranjan

  • URL For J2SE Adapter Engine Configuration

    Hi All,
    I have to go for adapter configuration for that i need to go to Adapter Engine Configuration Screen. So can any one please tell me the URL for going to the particular screen.
    Regards,
    Rahul

    Hi rahul,
      I think URL for J2SE adapter engine is http://hostname:portname. Just check following link :
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/frameset.htm">J2SE ADAPTER ENGINE</a>
    Regards,
    Keith.

  • File, Send link doesn't open a new email. Using Firefox 11.0. Outlook 2010 is the Mailto default and W7 default email program. On the About:config page network.protocol-handler.external.mailto is set to regular font (not bold) "default Boolean true".

    File, Send link doesn’t open a new email. Running Firefox 11.0. Outlook 2010 is the Mailto default and the W7 default email program. On the About:config page, network.protocol-handler.external.mailto is set to regular font (not bold) “default Boolean true”.

    I assume you have tried toggling the setting in Firefox between Outlook and, say, Gmail:
    orange Firefox button ''or'' classic Tools menu > Options > Applications
    In the search box, type or paste '''mailto''' and pause for the list to filter.
    Change the setting and OK to save it, then return to the dialog, change back, and OK again.
    You also might want to toggle the setting at the OS level between Microsoft Outlook and the native Windows Mail client in a similar fashion. In Windows XP you could use IE's Options dialog, Programs tab, for this, but I'm not sure in Windows 7.
    Since one possibility is a problem in your Firefox settings (including the possibility of interfering add-ons), and another is a problem at the Windows level (e.g., Registry settings), it would be useful to try to identify which one it is. One quick way to distinguish is to create a new Firefox profile. It will start up with all factory settings. You can switch back to your existing profile after testing.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    After closing Firefox, start up again in the Profile Manager as described in this article: [http://support.mozilla.com/kb/Managing+profiles Managing profiles].
    With the new profile, can Firefox successfully create a message in Outlook?

  • Can I configure file sender to take only 1 file per time?

    Hello,
    Can I configure file sender to take only 1 file per time?
    I have scenario from file to ECC.
    The poll interval is 300 seconds.
    I want that the sender channel will take only 1 file per time.
    Thank you
    Elad

    Hi,
    Definely there will be some specific reason for doing this. If your purpose of doing this is to read the files one after another then there are other alternatives for that like using QoS as EOIO and then putting a delay of 30 sec in your message mapping so that each message will be process after 30 sec.
    If you describe more than probably someone can give his/her best opinion.
    Regards,
    Sarvesh

  • Submitting a pdf in acrobat 9 (vista) send button doesn't work

    I have created a form in livecycle designer with either "submit by email" (sends xml file) or a submit button with a pdf chosen as submit type. The form works fine in acrobat 9 but when I click on either button and it opens my email client (outlook in windows vista), the "send" button doesn't work. Any ideas?

    I have created a form in livecycle designer with either "submit by email" (sends xml file) or a submit button with a pdf chosen as submit type. The form works fine in acrobat 9 but when I click on either button and it opens my email client (outlook in windows vista), the "send" button doesn't work. Any ideas?

  • TS3276 Can't send email. Send button doesn't work.

    I'm using mail 4.6. The send button doesn't work. I click on it and nothing happens.

    Try Disc Utilities > Highlight your current drive > Repair permissions.

  • Why is my diabled login greyed out after i unlock it? I have tried to remove the library file but it doesn't work

    Why is my diabled login greyed out after i unlock it? I have tried to remove the library file but it doesn't work. It worked the first time and than all of a sudden it was greyed out.

    Where do you see a disabled login? In system preferences? In Login screen?

  • SMS send button doesn't work !

    Hi
    I can't send SMS messages ! The blue "Send" button doesn't work ! All the other buttons (QWERTY board, To: etc) are fine.
    Anyone seen this problem ?
    Running 2.0.1 on 3G.
    Regards and thanks in advance.
    John

    Try turning the phone on/off....I once had a button stop "working" and it fixed it......I have had certain buttons not work in different applications (like the facebook application) and that would just be an application error, not an error with iphone itself, so it might also be an error with your text message application. If it continues, make a genius bar appointment....they are really helpful and sympathetic! And purchase the applecare protection....great protection for the price (although it doesn't protect against damage caused by you, like dropping or water damage, which *****)

  • IMessage send button doesn't work

    I can receive instant messages, but the send button doesn't work.

    - Make sure have something entered in the Subject fied.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - iOS: Troubleshooting Messages

  • HT204382 I just bought Quicktime MPEG - 2 to play MPG video files and still doesn't work. any suggestion?

    I just bought Quicktime MPEG - 2 to play MPG video files and still doesn't work. any suggestion?

    Please note:
    If your Mac has OS X Lion, MPEG-2 functionality is built in and the QuickTime MPEG-2 Playback Component is unnecessary.
    QuickTime MPEG-2 Playback Component for Mac OS X - Apple Store (U.S.)

  • Decentralised Adapter Engine Configuration

    hi all,
    I have already installed DAE for a XI server.
    Right now i am able to see it in RWB.But it is not visible in Adapter engine dropdown of communication channel.
    I wanted to know whether some settings in visual admin of XI server also has to be done.
    regards,
    ujjwal kumar

    Hi Ujjwal,
    Please ignore my previous post and follow this as i would like to add to it:
    The non-central Adapter Engine provides a configuration option called Java Proxy mode (JPR mode). In this mode, the adapter registration in the SLD is disabled so that the underlying system becomes a plain Java proxy application system (just like an ABAP system with ABAP proxies). The collaboration partner agreement (CPA) service no longer reads the CPA cache data from the Integration Directory.
    In this case, you can use a service property to configure the user for sending messages to the Integration Server (outbound scenario). The Integration Server uses an access control list (ACL) to check receiving messages based on this configuration setting (see SAP Note 852237). The ACL check is always skipped when the Adapter Framework service user (usually PIAFUSER) is used for sending.
    To switch the Adapter Engine to JPR mode, perform the following configuration settings:
           1.      In the Visual Administrator, choose the SAP XI AF CPA Cache service and set the SLDAccess property to false.
           2.      Save your settings and restart the service.
           3.      Make sure that the cacheType property still has the value DIRECTORY.
           4.      In the Visual Administrator, choose the SAP XI Adapter: XI service and set the respective values (user, password, Integration Server URL, client, and language) for the properties xiadapter.isconfig.*.
           5.      On the Integration Server, call transaction SMICM to ensure that you have maintained the correct Integration Server URL.
           6.      On the Integration Server, call transaction SU01 to create the new user and assign it the role SAP_XI_AF_SERV_USER_MAIN. You can copy PIAFUSER for this purpose.
    If a password change is required, log on to the Integration Server with the new user and change the initial password. Otherwise the communication will fail.
           7.      In the Visual Administrator, check if the ABAP-Java user synchronization was successful.
           8.      Log on to the SLD and choose Content Maintenance ® XI Adapter Framework.
           9.      Select your non-central Adapter Engine and remove it.
    Also refer:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/3e/e3fb40f17af66fe10000000a1550b0/content.htm
    After you are done with your installations there are some verifications that needs to be done at the visual admin side before monitoring your Decentral Adapter engine:
    1)Start the J2EE from SAP management console and start the J2EE
    (If you have dynamic IP address, then hosts file in server should be changed before starting decentral AE)
    2)Start Visual Administrator & login to your Default connection
    3)Navigate to Services à SLD Data Supplier and
    verify the SLD connection
    4)Navigate to Services à Security Provider and verify the users (its synchronized with the XI Server)
    Now check in RWB -> Component Monitoring -> Non-central AE
    Also refer page 25-29 of the following pdf:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars-nw-rig/configuring%20a%20local%20adapter%20engine%20to%20work%20with%20a%20central%20instance%20-%20webinar%20powerpoint.pdf
    Hope this helps.
    Regards,
    Shibani
    *Ps reward with points if helpful*

  • File Sender FCC doesn't allow repetitive segments and unbounded together

    File Sender FCC give me error if I use the repeatitive structure and * (Unbounded) together. Here is the recordset  structure  UNH,1,BGM,1,DTM,1,NAD,1,CNI,1,STS,1,RFF,*,DTM,1 for which I am getting the error "Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR consistency check in recordset structure validation (line no. 12: missing structure(s) before type 'DTM' "
    If I use the recordset structure UNH,1,BGM,1,DTM,1,NAD,1,CNI,1,STS,1,RFF,2,DTM,1 then I am able to parse the file. But My requirement is that I will expect variable no of RFF segments in my structure. If you guys could help me that would be great.

    Hi Mohammad
    In this case try to maintain the following in content conversion parameters.
    Key Field Name = Key
    <xml>.fieldFixedLengths      = 1,......................
    <xml>.fieldNames                 = Key,.................
    <xml>.keyFieldValue            = 1
    <xml>.keyFieldInStructure    = ignore
    <xml>.endSeparator            = ,
    Think this should solve your problem.
    Refer the following SAP help link :-
    [http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm]
    -Thanks
      Karthik

Maybe you are looking for

  • Generating reports using RWServlet.class(Patch-12)

    Sir, We have configured the Apache Tomcat-3.2.2 to be the servlet engine for generating reports using oracle.reports.rwcgi.RWServlet. Earlier we have been using, Patch-2. We have created many keys(cgicmd.dat) for the different reports that are there

  • How to print from ipad?

    How do I print on a brother wireless printer from my iPad?

  • Pxi-2567 ground references

    Hi all, I'm considering using a PXI-2567 in a project. However I need to check where the ground references connect to before committing to the purchase. The pxi-2567 datasheet shows nine separate ground signals on the output connector. These are: Con

  • Test Data in Quality

    Hi Everyone, Pl tell me what is the essential data that is needed to get tested in Quality server for a particular plant.? How this testing is carried out before transfering the data into Production server.? Thanks in adv.

  • Can't use apps when offline?

    I bought the PS 6 CC and when I am not online and connected and try to launch the app and my working files, it says the disc is not available? I just bought Illustrator CC  and same thing. I do a lot of my creative work when I am at my house without