Bad Font Detected pop up

Hey newb here, I am attempting to install Leopard on a g4 powerbook and after install worked its mojo a Bad Font Detected pop up keeps coming up and it doesnt want to get past this point.
Any help out?
THx

So I booted into safe mode and removed the font from System/Library/Fonts but the error still appears with the same font, is there somewhere else or hidden font files or something?

Similar Messages

Bad font detected

After installing updates about a week ago on my Leopard system, font book give "Bad Font Detected" error message while booting and deactivates many of my fonts.
I have to go back in and manually activate them using my font management software. After the fonts are activated everything works fine. Can I turn font book off so it doesn't do this?

Jessek wrote:
After installing updates about a week ago on my Leopard system, font book give "Bad Font Detected" error message while booting and deactivates many of my fonts.
I have to go back in and manually activate them using my font management software. After the fonts are activated everything works fine. Can I turn font book off so it doesn't do this?
You do not want to disregard an error message. You need to fix the actual core issue.
Have you recently run disk utility and repaired permissions? This would be step 1.
Then I would check for any 3rd party fonts that are not fully Leopard compatible.
Then I would check the console logs for the reasons for the problem.

How can I fix Bad Font Detected dialog box

Hi, I Installed some font books a few months ago then change hard drives, so I moved some of the fonts to the new HDD. After that I started getting this annoying error boxes with this information:
http://www.redgizmo.net/errors/BadFontError.png
This errors (with different fonts) appear some times when I open Illustrator, photoshop, InDesign or some times when I open Safari. I can't find the error path on my computer and I don't know how to get rid of those. Please help.
Someone know how can get rid of the errors?
Thank you

Hello pv:
Welcome to Apple discussions.
I suggest you run fontbook (located in your application folder). That should tell you which fonts are corrupted/problematic.
Barry

Font book - window pop up that says bad font

So I got my mac back after the harddrive was erased so it was brand new. I uploaded a bunch of fonts from before and I was trying to install them all. Then my computer got slower and when I would start my mac a window would pop up saying BAD FONT so I would go to the direct place and erase the font.
Is there a way to restart font book to its old settings before installing font?
or know how to find all bad fonts?
I validated the file from library-fonts and my font folder i brought in and erased the ones that had a x saying error but I still get the window.
and what is the normal amount of fonts we can have active.
also when I click on disable I don't see a difference.
I just erased the font folder I had brought in and there is no different in the amount of fonts in font book.
sorry for the questions, hope I make sense.
thanks
I had posted this in macbook pro but cmcsk told me about posting here in hopes that I could get more help.

curly --
Here's a great article for you . . .
It's a little long, but the most important stuff about the fonts you need
is in the first 25% of the article. The article, by Kurt Lang, will tell you which fonts you really need, etc.
http://www.jklstudios.com/misc/osxfonts.html
The only thing still giving me pause, is you statement that you're clicking on the "Mac HD
from the computer." If you are seeing the icon the Mac, and the word "computer" totally
within the Font Book pane, then that's fine to delete fonts marked with a warning.
Just make sure you read the beginning of the article first, OK?
Message was edited by: ~Bee

EtreCheck saying Bad Fonts?

My mac has been running slow lately. Just ran EtreCheck and it's saying I have bad fonts? Does anyone know why or how to fix this?
Thank you so much!
EtreCheck version: 2.0.11 (98)
Report generated November 15, 2014 at 12:16:57 PM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.53 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:8:37
Disk Information: ℹ️
Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 249.20 GB (91.34 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9) Support
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.67) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) Support
User Launch Agents: ℹ️
[not loaded] com.adobe.ARM.[...].plist Support
[not loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
None
User Internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Safari Extensions: ℹ️
OpenIE
Facebook Improved
Pin It Button
1-ClickWeather
3rd Party Preference Panes: ℹ️
None
Bad Fonts: ℹ️
Verdana Bold.ttf: /Library/Fonts/Verdana Bold.ttf
Trebuchet MS: /Library/Fonts/Microsoft/Trebuchet MS
Wingdings 2: /Library/Fonts/Microsoft/Wingdings 2
Arial Rounded Bold: /Library/Fonts/Microsoft/Arial Rounded Bold
Wingdings 2.ttf: /Library/Fonts/Wingdings 2.ttf
Arial Bold Italic.ttf: /Library/Fonts/Arial Bold Italic.ttf
Verdana.ttf: /Library/Fonts/Verdana.ttf
Arial Black: /Library/Fonts/Microsoft/Arial Black
Verdana: /Library/Fonts/Microsoft/Verdana
Arial.ttf: /Library/Fonts/Arial.ttf
Wingdings.ttf: /Library/Fonts/Wingdings.ttf
Georgia: /Library/Fonts/Microsoft/Georgia
Times New Roman Bold.ttf: /Library/Fonts/Times New Roman Bold.ttf
Verdana Bold Italic.ttf: /Library/Fonts/Verdana Bold Italic.ttf
Comic Sans MS: /Library/Fonts/Microsoft/Comic Sans MS
Arial: /Library/Fonts/Microsoft/Arial
Times New Roman: /Library/Fonts/Microsoft/Times New Roman
Wingdings 3.ttf: /Library/Fonts/Wingdings 3.ttf
Tahoma: /Library/Fonts/Microsoft/Tahoma
Wingdings 3: /Library/Fonts/Microsoft/Wingdings 3
Brush Script.ttf: /Library/Fonts/Microsoft/Brush Script.ttf
Impact: /Library/Fonts/Microsoft/Impact
Arial Italic.ttf: /Library/Fonts/Arial Italic.ttf
Times New Roman Bold Italic.ttf: /Library/Fonts/Times New Roman Bold Italic.ttf
Verdana Italic.ttf: /Library/Fonts/Verdana Italic.ttf
Times New Roman.ttf: /Library/Fonts/Times New Roman.ttf
Gill Sans Ultra Bold: /Library/Fonts/Microsoft/Gill Sans Ultra Bold
Arial Narrow: /Library/Fonts/Microsoft/Arial Narrow
Times New Roman Italic.ttf: /Library/Fonts/Times New Roman Italic.ttf
Arial Bold.ttf: /Library/Fonts/Arial Bold.ttf
Andale Mono: /Library/Fonts/Microsoft/Andale Mono
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      7% WindowServer
      0% AppleSpell
      0% fontd
      0% com.apple.WebKit.WebContent
      0% Memory Clean
Top Processes by Memory: ℹ️
180 MB com.apple.WebKit.WebContent
94 MB Safari
64 MB mds_stores
47 MB WindowServer
43 MB com.apple.WebKit.Networking
Virtual Memory Information: ℹ️
1.87 GB Free RAM
1.23 GB Active RAM
377 MB Inactive RAM
541 MB Wired RAM
929 MB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1417519526 1189540302 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Got a notice about a BAD FONT and now some of the sites seem to have garbled text

Got an on screen warning about a "bad font"

Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

The Bad Font thread...

Hi guys,
I just went through more than a thousand fonts, just to find that one that was messing up my browser.
Guilty font: "Mark"
I deactivated it and now everythings cool again.
I searched this forum at first but found that several users had problems with different fonts. Maybe it wouldn't be such a bad idea to group all "bad fonts" together in one thread. This could all spare us some valuable time. Post as you wish...
Greetz!

a THOUSAND thank you's...
thanks for the tip. My bad font was Arial. Seems strange since it's a common font, but deactivating it did the trick. It was so frustrating for weeks because I couldn't read basic text on some sites, but never had time to research the problem...
This is my first time exploring this forum, and it seems pretty helpful! Although Safari sounds like a nightmarish program for a lot of people. Other than this issue, mine works great - knock on wood!
So, thanks!
jp.

USB over current status detected pop out issue

Hi all
I faced an issue regarding usb over current status detected pop out issue. This popout keep pop out most of the time when i switch on my tv. Even i've try to plug off my cable and swith it on back.
Can anyone of you solve these problem for me....
Regards,
adzleazhar

Facing same problem as adzleazhar. Have used same laptop connected to 32in TV for several years. Problem only surfaced last month. Unable to resolve. Need help.

Detect pop-up using open VI references

hello,
I was wondering if there is a way to detect if a pop-up has occured in a VI, from another VI by using an OpenVI reference.... and maybe some property node. I can't find a way. I can reference controls on a VI, and detect if their values change, but I can't figure out how to detect if a pop-up has occured.
much thanks!

Hi,
I've created a little Project that contains a couple of VI's and a global Variable. One Vi detects a dialog pop-up occurring within the other VI as you asked. Hopefully you can tailor this to your needs.
Hope this helps, and any more problems, or if the solution needs any more tweeks, give us a shout
Regards
Richard.
Richard S
Applications Engineer
Certified LabVIEW Associate Developer
National Instruments UK&Ireland
Attachments:
Detecting POP-UPS.zip ‏19 KB

[SOLVED] Qt 4.7 - 4.8 and bad fonts hinting.

Hi, since the upgrade to qt 4.8, font rendering of qt applications seems very bad to me.
Before the upgrade, firefox and konqueror looked the same, here is now,
I tried in graphicssystem native and raster:
http://ompldr.org/vYnZ2Mw/firefox1.png
http://ompldr.org/vYnZ2NQ/konqueror_native1.png
http://ompldr.org/vYnZ2NA/firefox2.png
http://ompldr.org/vYnZ2Nw/konqueror_raster.png
http://ompldr.org/vYnZ2Ng/konqueror_native2.png
I tried autohinter too, but gtk apps (cairo) seems always better, what happened?
My .fonts.conf:
<?xml version='1.0'?>
<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
<fontconfig>
<match target="font">
<edit mode="assign" name="rgba">
<const>rgb</const>
</edit>
</match>
<match target="font">
<edit mode="assign" name="hinting">
<bool>true</bool>
</edit>
</match>
<match target="font">
<edit name="autohint" mode="assign">
<bool>false</bool>
</edit>
</match>
<match target="font">
<edit mode="assign" name="hintstyle">
<const>hintslight</const>
</edit>
</match>
<match target="font">
<edit mode="assign" name="lcdfilter">
<const>lcddefault</const>
</edit>
</match>
<match target="font">
<test name="family">
<string>Segoe UI</string>
</test>
<edit mode="assign" name="hintstyle">
<const>hintslight</const>
</edit>
</match>
<match target="font">
<edit mode="assign" name="antialias">
<bool>true</bool>
</edit>
</match>
</fontconfig>
Last edited by kokoko3k (2011-12-30 14:16:23)

I casually managed to solve this issue by playing with fontconfig settings.
I'm really not sure if this is the correct way, but now i've the same font rendering i've had before qt 4.8 with hintstyle=hintslight.
My Steps are:
yaourt -S freetype2-infinality
* do not install fontconfig-infinality
edit ~/.fonts.conf as follows
<?xml version='1.0'?>
<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
<fontconfig>
<match target="font">
<edit mode="assign" name="rgba">
<const>rgb</const>
</edit>
</match>
<match target="font">
<edit mode="assign" name="hinting">
<bool>true</bool>
</edit>
</match>
<match target="font">
<edit mode="assign" name="autohint">
<bool>true</bool>
</edit>
</match>
<match target="font">
<edit mode="assign" name="hintstyle">
<const>hintfull</const>
</edit>
</match>
<match target="font">
<edit mode="assign" name="lcdfilter">
<const>lcddefault</const>
</edit>
</match>
<match target="font">
<edit mode="assign" name="antialias">
<bool>true</bool>
</edit>
</match>
</fontconfig>
the trick seems:hinting+autohint+hintfull=hintslight (!?)
edit /etc/profile.d/infinality-settings.sh and add/replace with those values:
SET_XFT_SETTINGS=true
XFT_SETTINGS="
Xft.antialias: 1
Xft.autohint: 1
Xft.dpi: 96
Xft.hinting: 1
Xft.hintstyle: hintslight
Xft.lcdfilter: lcddefault
Xft.rgba: rgb
export INFINALITY_FT_AUTOFIT_FORCE_SLIGHT_HINTING=true
export INFINALITY_FT_FILTER_PARAMS="06 25 44 25 06"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_GAMMA_CORRECTION="0 100"
export INFINALITY_FT_BRIGHTNESS="0"
export INFINALITY_FT_CONTRAST="0"
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=false
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=0
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=0
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=0
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=0
export INFINALITY_FT_STEM_FITTING_STRENGTH=0
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=0
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=false
export INFINALITY_FT_GLOBAL_EMBOLDEN_X_VALUE=0
export INFINALITY_FT_GLOBAL_EMBOLDEN_Y_VALUE=0
export INFINALITY_FT_BOLD_EMBOLDEN_X_VALUE=0
export INFINALITY_FT_BOLD_EMBOLDEN_Y_VALUE=0
Now logout/login.
Starting from there, you can further tweak infinality
Ah, openoffice also looks good out of the box, no need to install extra '*uglyfix*' packages
...and chromium still sucks like nothing happened.
-EDIT-
Remember to not change the hintstyle, leave it to hintfull.
Last edited by kokoko3k (2011-12-30 14:19:40)

Bad Font-Measuring Performance under Windows 8.1

Why does the following little loop (in c#) perform so bad using current version of WPF (.NET 4.5.2) if i change the font-family from "Segoe UI" to "Arial" (or something else...tried "Times New Roman" and "Courier New"
- Same problem)?
var tb = new TextBlock {Text = "Testtext", FontFamily = new FontFamily("Arial")};
for(int i = 0; i < 100000; i++)
tb.InvalidateMeasure();
tb.Measure(new Size(double.MaxValue, double.MaxValue));
With font-family set to Arial this block of code takes about 7.6s on my machine. Font-family set to "Segoe UI" takes about 1.9s. Why do (most) other fonts than Segoe UI perform so bad during measurement? Is there any tweak around, that does avoid
this enormous loss in performance?
As i found found out, "Tahoma", "Lucida Sans" and "Microsoft Sans Serif" are being measured really fast, also. Is this some "System-internal font"-thing?
Yes, i know, this is really constructed and broken down to a minimal reproducable example. The whole component is a custom datagrid with complex ui- and data-virtualization - much too big to post here. If i set the font of my
grid to, let's say "Arial", the scrolling-performance gets really bad. Using Visual Studio's Profiler i tracked the problem down to the measurement of my single grid-cells, which basically measure single textblocks and so i wrote the little test-code
above. Please keep in mind: My problem is NOT, that the code above is slow. (I know, this loop is totally senseless...it's for demonstration purposes only) My problem IS, that changing the font impacts measurement in such an enormous amount...
What is the difference between fonts like "Segoe UI", "Tahoma", "Lucida Sans" or "Microsoft Sans Serif" and fonts like "Arial", "Times New Roman" or "Courier New" that causes this huge
impact in measurement?
Btw.: This problem not only arises within my own grid component, it can also be reproduced with WPF's internal datagrid. Scrolling performance degrades dramatically when using "Arial" as the font-family.

Hi Max
I realise that WPF doesn't use Win32, but I suspected something similar (i.e. the font is being loaded and unloaded everytime a measure takes place rather than using a cached font). I just looked up TextBlock in ILSpy and can see a MeasureOverride method
which does quite a lot of work with the font before using it to measure text and then discards all of this information when it's finished. That's obviously where the bottleneck is. I don't program in WPF so I have no idea how to fix it.
protected sealed override Size MeasureOverride(Size constraint)
this.VerifyReentrancy();
this._textBlockCache = null;
this.EnsureTextBlockCache();
Follow the path of EnsureTextBlockCache() to see how much information is being processed and then dumped every time a measure operation is processed.
Mick Doherty
http://dotnetrix.co.uk
http://glassui.codeplex.com

Detect pops, crackles etc in imported CDs automatically?

I have 650+ CDs imported into my iTunes. I find from time to time that I will listen to a CD in iTunes I hadn't listened to in a long time and there will be skips or pops or crackles in one or more tracks. I no longer have any of my CDs - sold them back to the used music store - so I have to go buy them again and re-import them.
This is probably not possible, but is there any program that could scan my library and detect tracks that haven't correctly imported?

You are correct. I looked into this and even if I buy a CD and then rip it then lose it, let alone sell it to a used CD store, I legally cannot listen to my music on iTunes. I have to be in physical possession of the CD.
I just want to clarify that I have owned these 600+ at least once, and in a majority of cases, 2 times. I originally decided to get rid of my CDs because I don't like clutter; I just wanted to have everything on my computer digitally. So I ripped the rest of the CDs I hadn't ripped and sold them and started buying music from the iTunes. However, I decided I wanted the CDs at the highest possible quality and I am re-ripping everything as Apple Lossless. This is not an insignificant expense. I am buying CDs from the uses record shop, from BMG, form ebay, Amazon etc and slowly reripping everything. In addition, I am old enough to have originally purchased some of these recordings as albums or cassettes (a few even in 8 tracks) and so over the years have repurchased the same music in various formats (as I am doing now). I have spent and continue to spend a large amount of money on recorded music.
I just want to differentiate myself from those who have 650 CDs worth of MP3s taken from bit torrents and think that "music should be free" and never pay anything for what they have.
Finally, I spent a year studying in the UK in 1990-91 and loved it. Made it down to Brighton once on a subsequent trip and have a picture of myself and some friends on the beach. God I miss pubs and good beer and good TV...
Bryan

"Bad Authentication" when pop or smtp with Verizon e-mail using Evolution

I'm using Evolution 3.2.3 as my e-mail client.
It's worked with literally every ISP and mail service other than Verizon.
I followed the instructions on the Verizon support e-mail client setup:
Incoming mail server (POP3): pop.verizon.net
Incoming Server Port Numbers: 995
Outgoing mail server (SMTP): smtp.verizon.net
Outgoing Server Port Numbers: 465 Why is this important?
Make sure SSL encryption is enabled for the incoming and outgoing mail server.
But if I try to receieve or send e-mail I always get a "Bad authentication response from server" error.
Has anyone ever got Evolution to work with Verizon?
I searched and it seemed to work up until the year 2013.

For the sake of example, we are going to pretend that we are setting up fictional account "[email protected]" and the password for logging into that account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
The settings for using Verizon's servers would be:
Incoming Server: pop.verizon.net
Server Requires Authentication: Yes
Username: fakeacct
Password: fakepassword
Requires a Secure Connection (SSL): Yes
Port: 995
Outgoing Server: smtp.verizon.net
Server Requires Authentication: Yes (You can set it to use the same settings as incoming, or manually enter the username and password.)
Requires a Secure Connection (SSL): Yes
Port: 465
If you are given the option anywhere for Secure Password Authentication (SPA), set it to No, Normal, Plain, etc. - This can also be listed as "Authentication type" in some clients.
These settings should work unless you have a Verizon/Yahoo account, in which case the server names are: incoming.yahoo.verizon.net -and- outgoing.yahoo.verizon.net
If all of that is set up and it's still not working, your best bet is to provide a screenshot of your settings (with personal information blocked/removed) and any errors you are getting.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Changing fonts for Pop up menus

Hi all,
Could any tell me if there is a way to change the choose of
fonts you can use on the pop up menu options?
I am trying to have Arial as the first choice but my current
option does not allow this and i cannto find a way of changing it.
Thanks
Mark

harry109 wrote:
> Hi all,
>
> Could any tell me if there is a way to change the choose
of fonts you can use
> on the pop up menu options?
>
> I am trying to have Arial as the first choice but my
current option does not
> allow this and i cannto find a way of changing it.
Under the Appearance tab, click the font menu ad select
Verdana, Arial,
Helvetica, sans-serif. Highlight Verdana with your cursor and
delete it.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Keep Getting Font Conflicts Pop-up... Suitcase?

Hello all.
Since this morning, my office G5 keeps popping up these small dialog boxes with the OK button about FONT conflicts:
Suitcase
From Suitcase
There was a conflict when attempting to activate the font Verdana in the suitcase Verdana for this document. Please close the document and resolve the conflict in the Suitcase application.
It applies the same to the other font, Tahoma, same error message.
I have tried to DEACTIVATE these two fonts inside Suitcase, and these pop-up error messages only happen in MS Entourage
It is "no big deal", but the popping up is rather annoying and irritating, 'cause every email read or click these pop-ups will appear, and I have to click OK to close them
Thanks and cheers

these pop-up error messages only happen
in MS Entourage
You can sometimes find more help with Entourage problems in the MS newsgroups devoted to their products:
http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups

Bad Font Detected pop up

Similar Messages

Maybe you are looking for