"Bad image format" error when displaying an image on Nokia 6600

I get a "bad image format" error when I try and display an image on a Nokia 6600 cellphone. The image displays correctly when I run it on the J2ME 2.1 Emulator, but gives an error on the phone. Plz help!!

More info please... what kind of an image are you trying to display?

Similar Messages

  • Formatting error when displaying OSS note w/PDF

    While searching & displaying OSS notes, I click the PDF button to print or download the note.  I then get a message "An error occurred when formatting the SAP note.".  Has anyone seen this and have suggestions for correcting it?  My colleague is able to bring the note up in PDF format just fine, so it's something unique to my PC or Adobe reader.

    I've seen this last week too - no matter what PC I was using.
    If it doesn't work after a while I'd open an OSS call
    Markus

  • "Unsupported Image Format" error ONLY on exposures longer than 4 minutes

    When importing my photos to Aperture, I get an "Unsupported Image Format" error, but ONLY on images where my shutter was open for longer than 3 minutes or so.  I'm looking at Aperture right now, and I've got one shot that was 184 seconds long - no problem. Next shot, 240 seconds - ERROR.  I shoot everything in RAW and have no trouble with any of my "normal" exposure shots - thousands of them.  Error shows up only with the shots where I've locked the shutter open for more than 4 minutes.
    What the heck is up?  I'm *assuming* it's a problem with Digital Camera RAW in OSX, as Preview.app is also unable to display the image.  Photoshop CS6 and Lightroom 4 have no trouble with these images.  Even in Aperture, I see a low-res preview of these "error" images for about two seconds before the error message replaces it.
    Aperture 3.4.5
    Digital Camera RAW 4.07
    Nikon D600 (latest firmware) shooting .NEF RAW files, all images imported directly into Aperture from SD card in computer's slot
    OSX 10.8.4

    This problem, unsupported image format for long exposures, has been reported on and off for some time now.
    Its not an easy search to phrase but for example I found this Aperture 3 will not recognize RAW files obtained from long ... at dpreview from a while back.
    Sorry to say there are no resolutions that I can find. You might want to try and get in touch with Apple. They don;t make it easy to get software support even on there 'pro apps' but if you start with the normal Mac support number you might get to someone who can help.
    Additionally you can leave feedback by going to Aperture->Provide Aperture Feedback. There is a setting to report bugs.
    Sorry I don;t have anything better to report.
    good luck, post back if you find out anything
    regards

  • Unsupported image format error

    Hey folks,
    I've read several older threads on this topic and have not seen any new information. I am hoping there is a fix and someone out there knows it.
    When I fired up aperture today I discovered that all of my images display with the dreaded unsupported image format error.
    Thinking that my 215gb library had gotten too large, I tried to create a new library. Same result. When I import new images from my Canon 40D they show as a tiny preview and then quickly turn to the red message. It appears the raw files are not even imported into the library.... which made me think permissions. I repaired permissions and went so far as to set my ~/Photos/ to 777 ... still no dice.
    I tried rebuilding my library - did not help
    I have tried restoring from TimeMachine backup - no help
    I deleted the plist and ~/Library/Application Support/Apreture - no help
    I'm getting really worried that I have lost my library. I understand that the files are still there, but what about my edits and metadata. Seeing that this is a wide-spread issue is not helping my situation.
    Any suggestions? Thanks in advance!

    Good questions and thinking! I was vague about the chronology.
    I first noticed the issue when I intended to import some images on my iMac which is home to my main 200+gb library. I never even got to the importing stage b/c I saw red, literally, when I launched the app.
    I then created a new library and tried to import.
    My final stage was to import onto the MBP, different machine, different library.
    As for updates, I had applied the Dec. updates to the iMac but not the MBP.
    While I know this will destroy my crediability as a troubleshooter (if you saw my images you'd know I have none as a photog ) I have realized that my Canon 40D somehow got switched into a custom mode during a few of the shots causing it to go into Canon's sRAW. I think that accounts for the behavior of the imported images on the MBP. It does not, however, account for my entire library turning red on the iMac.

  • I am importing videos from my canon sl1 to my macbook when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item 'MVI_1040

    I am importing videos from my canon sl1 to my macbook air when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item ‘MVI_1040'' Thanks in advance

    Can you access the images on the phone with Image Capture (in the Applications Folder) ?

  • How to retain focus in Web forms 6i item when displaying pdf image

    How to retain focus in Web forms 6i item when displaying pdf image in a multi-record block?
    Hello.
    I have a Web Forms 6i program (version Forms 6.0.8.19.2) running in a 3-tier application. The web form program has a multi-record block containing invoices. When navigating to a record, the form should display the PDF invoice image which is stored in an Oracle 8.1.7 database as a BLOB in another window. When user press down-arrow, the next PDF invoice image should be displayed.
    I am able to accomplish the functionality above by using web.show_document('URL', target') in the when-new-record-instance. The URL being called is a PL/SQL Web Toolkit stored procedure using wpg_docload.download_file built-in.
    The problem is that the focus is lost on the Webform and the focus is shifted to the PDF image window when you navigate to the next record using down-arrow. I want to retain the focus in the form as this is a data-entry form, the operator will use down-arrow to go to the next-record rather than the mouse. I also only want to do this for this Invoice Entry form and NOT to all forms.
    Please advise how to resolve this problem. Thank you.
    Regards,
    Armando

    Magesh,
    the issue of a SSO protected form showing the logon dialog is a knwon issue for Windows200 and the Oracle9iAS base release. If you applied Forms Patch 1 then this should be solved. Hope that I am right in that you are using Oracle9iAS and not Oracle9iDS. Do you see the Single Sign-On logon screen or the Forms logon dialog directly? Check the forms90.conf file in teh forms90/server directory as this contains the Form sso settings (mod_osso) which by default is commented out and therefore inactive. You need to remove the commenting '#' characters and make sure that each sentence having a '#' in front, after that starts on a new line.
    The Forms deployment documentation within the Oracle9iAS docu provides this information too.
    Frank

  • What's with the occasional "Unsupported image format" errors?

    I get this error randomly -- suddenly Aperture can't show me anything but a brief flash of the image, and then I get the maroon screen "Unsupported image format" error. Restarting Aperture returns things to normal. I've seen this in both version 1.5.6 and 2.
    I can count on this occurring about every hour or so. This is quite frustrating. I use CR2 files almost exclusively, written from a Canon 5D.
    Any ideas or workarounds for this behavior?

    I was getting this all the time with 1.5, I have not seen it yet with 2. I think it's a memory thing, it happens more quickly if I am running Safari and other stuff. Sometimes quitting Aperture then starting again does the trick, more often shutting the machine down and rebooting clears it. I also have some very large tiff's in the library, Aperture can't (I've not tried it in 2 yet) cope with them, always the unsupported error message. These files are between 300mb to 1gig, sometimes it justs hangs on to the 300mb but mostly not. By the end of the day it was a real problem, I could only export images 2-3 at a time, if I tried to email 10 low res I would get either an out of memory warning or unsupported etc.
    Something holds onto the memory somewhere either in Ap or Safari or all things running.
    Kevin.

  • Error when displaying xellerate form

    Hello,
    I have the following error when displaying the form of any xellerate users :
    ERROR,03 May 2011 10:40:56,273,[XELLERATE.APIS],Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-19'
    All is working fine, just this error that is diplayed each time I want to display a user form. In my formMetadata.xml, I have the following definition for the field -19, it is the manager :
    <Attribute name="-19" label="global.label.managerid" displayComponentType="LookupField" variantType="long" dataLength="50" map="Users.Manager Login">
    <ValidValues lookupColumnNames="User ID,Last Name,First Name" lookupQuery="SELECT usr.usr_key,usr.usr_last_name,usr.usr_first_name,usr.usr_login FROM usr, ugp, usg WHERE ugp.ugp_name = 'PROF_MANAGER' AND ugp.ugp_key = usg.ugp_key AND usr.usr_key = usg.usr_key AND usr.usr_status = 'Active' AND usr.usr_emp_type = 'Employee'" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
    </Attribute>
    What is the problem with my attribute definition ?
    Thanks for your help,
    Kind regards,
    mdadikn

    Hello,
    I'm new to OIM. I am a new hire to a group that had a contractor setup the whole system. I'm finding a similar issue on our system here. I've looked through the database and cannot seem to find the issue. Error happens when from the webapp clicking on "Create IT Resource".
    From the Error Log:
    Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-82'
    Line with issue from FormMetaData.xml:
         <Attribute name="-82" label="global.label.itresourcetype" displayComponentType="LookupField" variantType="String" dataLength="255" map="IT Resources Type Definition.Server Type" useInRule="true">
              <ValidValues lookupQuery="select svd_svr_type from svd" selectionColumn="svd_svr_type"/>
    </Attribute>
    Please let me know any additional information/questions. From what I can tell everything should be correct. Sorry again if the answer is obvious, I'm only 3 days into OIM.
    Thank you,
    Ryan

  • Image size changes when moving an image between Lightroom and CC.

    Image size changes when moving an image between Lightroom and CC.
    I opened a .dng image in LR and then opened it in the Develop module.  I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
    I click Cntl-E and the image opens in CC.  There I click on Image > Image Size and the Image Size  is 13.288 inches by 20.533 inches.
    Why does the image size change?
    I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
    Help!...Please?

    The penny will drop soon or maybe the cloud will lift.
    In Lightroom all editing is undoable/nondestructive.
    Hence a crop of 3x2 is not inches, centimetres, pixels or anything else. It is jst a ratio. When a file is exported, either to PS or disk, then the crop ratio has size determined in respect of pixels and inches or cms.
    So my 6000x5000 pixel image I will crop to 3x2 that leaves (before exporting) a 6000x4000 file.
    Now when exported it can be set to export at
    100pixels per inch and will end up at 60x40" when printed.
    200pixels per inch will end up at 30x20"
    300ppi will end at 20x13.3"
    You will notice in the Crop Tool there are no size denominations such as inches or centimetres as an image file only has pixels and the determination of size is done through exporting or printing.
    Hope that helps somewhat..

  • I have a SharePoint list, that list contains photos(images), now i want display that images in spgridview?

    Hi All,
    i have a SharePoint list, that list contains photos(images).
    now i want display that images in spgridview.
    How can i display?
    Thanks in advance!

    Hi,
    According to your post, my understanding is that you want to display that images in spgridview.
    You can use a hyperlinkfield that is bound to the SPGridView. Please refer to:
    Add a Hyperlink Image in a SPGridView
    You can also use TemplateField or ImageField to render images. Please refer to:
    Image not showing in grid view
    In addition, here are two similar articles for your reference:
    How To: Use SharePoint 2010 WebParts with a GridView Control to get SQL Image Data
    type and other Values
    DotNetSharePoint: How to display images in gridview from database using asp.net
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • ABAP Run time error when display the Customs Export declarations

    Hi,
    I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
    Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
    While debugging we found that Primary Key of the below structures are not the same
    lt_corpar                              type      /sapsll/corpar_t
    lt_corpar_ht       type      /sapsll/corpar_k02_ht
    Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
    Error message short details
    Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
         "/SAPSLL/CUHD_LOAD_SELECTION".
        The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
        In the source code you have the termination point in line 144
        of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
    We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
    Regards,
    Pradeep Maddi

    Hi,
    I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
    For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
    Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
    Proforma Invoice not transferred to GTS
    After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
    Error details
    Runtime Errors         ITAB_DUPLICATE_KEY
    ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
    Application Component  SLL-LEG
    You tried to insert an entry into table  "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
    Regards,
    Pradeep

  • Ent-06972 Error When Displaying BIBeans for Dimension Dataviewer

    dear all,
    I have problem when trying to view data on dimension with dataviewer in OWB 11g. it's no problem when i load small amount of data, but when i load huge amount of data i've got error message "ent-06972 Error When Displaying BIBeans for Dimension Dataviewer ". is it some kind of bug in OWB?

    I am also getting the same error, using 11g.

  • Unrecognized database format error when trying to access addin to Acrobat reader?

    I get an "Unrecognized database format" error when trying to access addin to Acrobat reader so I can use Pro to edit a pdf document?  What do I do so that teh ACCESS program aI am generating PDF's from uses Pro and not Reader?
    Thanks,
    Dan

    Adobe Reader and Acrobat Professional are 2 different products. Reader is for free and limited as to what it can do an support.
    Add-ins can only use features supported by Reader.
    You need Acrobat to edit PDF forms. Acrobat no longer supports access to SQL databases through Acrobat JavaScript.
    If you have an add-in and Acrobat can use it for filling a PDF form from Access, you need to talk to the developer to see if it can work with Reader.

  • Error when inserting the image in WAD

    Hi,
    I have inserted a .gif image in MIME repository and then in WAD template I have inserted a image and then when I ry to execute the WAD template, everything is working fine in the report but the image/logo is not displayed, the link is being displayed...
    And a warning is displayed at the bottom of the WAD template:
    W2   42:46  Tag '<img>' lacks 'alt' attribute
    tag '<img>' lacks 'alt' attribute: Correct the Template in the editor
    How do I resolve this error???
    Thanks & Regards.

    Hi,
    check whether the "default_host/sap/bw/Mime" service is active  with T-code  SICF.
    logo file name should be in lower case even though it is upper case in MIME repository.
    (Logo path looks like this "sap/bw/Mime/Customer/Images/testlogo.gif")
    Regards,
    Daya Sagar

  • 3.4.1 update unknown image format error

    When I click on any images older than about three years in my library, they disappear, only to be replaced by the Image Format Unknown screen.
    This is SO unnaceptable for a "professional" level program.
    How does one report bugs to Apple? 'Cause this is a BIG ONE.

    Me too! I've used Aperture since version 1, so cool it with the snark!
    Since updating to 4.3.1 it now corrupts, apparently, images older than about three years. It's also doing a weird thing where it thinks it has an older processing engine, even on recent images created after installation of the new one.
    Eight cored iMac i7 chip, 16 gigs of RAM, running on two terabyte internal with Referenced Images on a Drobo disc array.
    Very bad bug. Can't export, it won't allow me, saying Unsupported Image Format. Thumbnails are there until I click on them, image starts to load, then goes to Unsupported Image Format.

Maybe you are looking for