Badi not called - BI

Hello experts.
I have a BADI implementation for a virtual characteristic in BI. But when I run the query, the badi does not seem to be called at all. I know this because I tried to debug by placing breakpoints but the query never stops at the break point. the same BADI, with exact same code, however, runs fine in our PROD system.
Is there any setting or anything that I'm missing to make the BADI run in DEV?
I want to debug and need some help. Interface name: IF_EX_RSR_OLAP_BADI

I am sure you would have checked about the activation of the implementation and deactive and reactive the implementation and all.
If the job can be run in background I place this code
DATA: lv_c TYPE c VALUE 'J'.
WHILE lv_c EQ 'J'.
ENDWHILE.
and try to keep the process in infinite loop and try to debug the work process thru SM50, and see how it behaves in background.
check the mentors aproach of finding if the BADI is active.
Re: BADI shows ACTIVE but when run... its not being called

Similar Messages

BADIs are not calling in BUPA_MAIN

Hello Friends,
I need to populate some Z fields when BDOc is flowing. I thought of writing this logic in BADIs (CRMXIF_PARTNER_MAP & CRM_DATAEXCHG_BADI ) . But these BADIs are not calling in debugging to check the data.
Please let me know do i need to do any settings to trigger these BADIs
Thanks & Regards
Dinesh

Hi,
CRMXIF_PARTNER_MAP is good for IDoc fields to be filled in (in or outgoing message).
Instead of thist try maybe with BUPA_GENERAL_UPDATE.
Regards, Robert

Classic BADi not being called

Hello Experts... Your kind and expert advice is deeply appreciated...
We had implemented a BADi in CRM4.0 and that is being called and working alright.
We are now upgrading CRM4.0 to CRM7.0. With this change classic BADis is not being called.
Difference I noticed in calling program is that in CRM 4.0 BADIs were pulled/instantiated by factory method. However in CRM 7.0 it uses "GET BADI" command. But since "GET BADI" does not fetch implemented BADi, it throws BADI not found exception.
- I searched and learnt that "Get BADI" can fetch classic BADIs and there is no need to migrate classic BADIs to new BADIs ...(if I am not wrong)..
- Also that I re-activated classic BADi in CRM 7.0 but still "Get BADI" does not pulled/instantiate BADi.
- Also I search to have report "ENH_BADI_ADD_MIGR_INFO" run to create link between Classic and new BADi. Will this work?
Kindly advice to call classic BADi in CRM 7.0? Appreciate it. Thanks!
Warm Regards,
Kalpit

Hi,
Check if this BADI is migrated to enhancement spot (In attributes TAB). If yes, you need create an enhancement implementation for
this BADI.
Thanks,
SKJ

HR_IN_LOANS_VALIDATE badi is not called while infotype 45 is changed

Hi all,
I have activated badi:HR_IN_LOANS_VALIDATE implementation: ZHR_VALIDATE and its is working fine for creating Infotype 45 (INS) but when i change(MOD) it is not called. ie it does not enter the badi implementation code.
please see if you can help me.
thanks
Ujjaval

hi IA,
I have tried different combination in SWEHR3
E     Business event     1001     Relationships     A025     Is attended by     INS          0     PDOTYPE_E     CREATED
E     Business event     1001     Relationships     A025     Is attended by     INS     BOKF     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     INS     BOKP     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     INS     BOKW     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     INS     CNOW     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     INS     CPRB     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     UPD     BOKF     0     PDRELA_025     MODIFIED
E     Business event     1001     Relationships     A025     Is attended by     UPD     BOKP     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     UPD     BOKW     0     PDRELA_025     CREATED
E     Business event     1001     Relationships     A025     Is attended by     UPD     CNOW     0     PDRELA_025     CREATED
i did same thing in SWEHR2....still no luck...
please guide me if have any alternative options

BAdI HRPAD00INFTYDB is not called

Hi there!
I encountered the problem that the BAdI HRPAD00INFTYDB is not called on any update of infotype 2002. The mentioned infotype is updated by the report RPTARQPOST, after this update I want to have some code executed in th method UPDATE_DB. We are using ERP2005 an EP7.
In addition I implemented my code in BAdI HRPAD00INFTY, too. But this one is not called either.
Maybe somebody could tell me if one of the BAdI are called at all!?
Thanks and best regards,
Michael

Hi,
Have u activated your BADI?
Go to se19 n create implementation for the concerned badi there.
Click on the method in which u want to add ur code..save code and check it.
Go back and then activate the BADI.
Regards,
Manoj.

Bad Pool Caller - Blue Screen of Death

Windows Blue Screens of Death (BSoDs) happen whenever your computer encounters something it doesn’t know how to process, so it shuts itself down to prevent any damage. Sometimes BSoDs happen once and you don’t see them again when you restart — however, this isnt always the case and a BSoD may show up repeatedly.
In this article we will look at issues causing a bad_pool_caller BSoD. What has happened is that a thread in the laptop's processor has made a bad pool request. This means that it’s asking to use resources that are unavailable, nonexistent, or in use by another thread. It could also mean that the pool header is corrupted — regardless of the particular error, it, like most BSoDs, is caused by driver issues.
Drivers are what makes your computer work. Every device connected to your computer, and nearly every component inside it has a software driver that determines how Windows interacts with your device. When driver issues are encountered- which is fairly common on new operating systems like Windows 8 — it can cause a lot of problems, but, fortunately, sometimes there is an easy fix.
Recently Connected and Installed Device
Try to determine which device was last connected or installed before an error appeared. Often this can be a new peripheral device. Go to Device Manager (in the Control Panel) and find the driver for the recently connected peripheral device driver. From there, you can get Windows to search for updates, you can disable it, or you can uninstall it entirely. You can also disconnect the problem device and perform a system restore to before the device was connected and supporting software was installed.
Recently Installed Program
If your drivers aren’t the problem, a recently installed program may be the issue. If you can determine what program you installed that started this, uninstall it or perform a system restore to before the program was installed, and, after a restart, you should be good to go.
System Restore
Windows 7 and earlier
Windows 8
Any further issues that cannot be resolved may require your computer to be repaired.

Every time we try to connect his Nano it causes the PC to crash with this Bad Pool Caller message.
is the BADPOOLCALLER citing a specific file, Laurita? if so, what is it called? (exact spelling please.)
if it's not citing a specific file, let's try getting a minidump to the Apple engineers for a look.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
Find that file and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

Messaging server not calling the SpamAssassin

HI all,
The current instalation:
For SJES Messaging :
# ./imsimta version
Sun Java(tm) System Messaging Server 6.2 (built Dec 2 2004)
libimta.so 6.2 (built 00:34:23, Dec 2 2004)
SunOS rcaredev 5.9 Generic_117171-08 sun4u sparc SUNW,Sun-Fire-V240
For Spam Assassin:
# ./spamassassin -V
SpamAssassin version 3.2.3
running on Perl version 5.8.8
The option.dat contents:
! for Spamassassin
spamfilter1_config_file=/opt/SUNWmsgsr/config/spamassassin.opt
spamfilter1_library=/opt/SUNWmsgsr/lib/libspamass.so
spamfilter1_optional=1
spamfilter1_string_action=data:,require "fileinto"; fileinto "Junk"
mm_debug=5
# cat /opt/SUNWmsgsr/config/spamassassin.opt
host=127.0.0.1
port=783
mode=0
verdict=spam
debug=1
# ls -l /opt/SUNWmsgsr/config/spamassassin.opt
-rw-r--r-- 1 mailsrv mail 52 Nov 15 01:49 /opt/SUNWmsgsr/config/spamassassin.opt
The imta.cnf contents:
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 poo
l IMS_POOL fileinto $U+$S@$D destinationspamfilter1optin spam
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL ma
ytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 destinationspamfilter1optin spam
I ran:
# ./imsimta cnbuild
# ./imsimta restart
Then I started thge :
# ./spamd -d
But nothing happens, if I manually run:
# telnet localhost 783
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
SPAMD/1.0 76 Bad header line:
Connection to localhost closed by foreign host.
Which proves that the spamd is listening on port 783.
The messaging server is not calling the SpamAssassin on the port 783, any ideas what could have gone wrong?
I also checked the "snoop" command and also "spamd -D" for debug, no traffic go to the spamd daemon.
Best

Hi,
goSolaris wrote:
The junk emails are sent now to the folder "Junk" in the users mailbox, can you comment on the following
1. Does the spam emails live in the Junk forlder forever until the user delete them?Emails aren't deleted from users email folders (including Junk) unless you have configured a folder expiry rule. The following web-page steps you through what is required to set up just such an expire rule:
http://docs.sun.com/app/docs/doc/819-2650/6n4u4dttr?l=en&a=view
2. If I need to discard completely the spam emails instead of sending them to a folder in the user mailbox, what change should I do to the channel configuration?The following link gives an example of how to configured a sieve rule which will discard emails above a certain spamassassin score and to fileinto a 'spam' folder if the score is below this value.
http://docs.sun.com/app/docs/doc/819-4428/6n6j4261t?a=view#gebhx
3. After applying the patch, the documentation says that I can work with the existing configuration files or upgrade using a set of commands, do you think keeping the existing configuration (to minimize the changes) will work fine?You definitely need to run the ./patch-config and ./install-newconfig commands post-upgrade. Otherwise fixes that have been made to things such as the messaging express interface will not be represented (files need to be changed for a lot of the fixes).
Regards,
Shane.

After SRM 5.0 upgrade BBP_DRIVER_DETERMINE not calling properly?

Hello,
We have upgraded our system from SRM 4.0 to SRM 5.0.Before upgrade we are using BBP_DRIVER_DETERMINE to determine function to create PO. If is b470_po_create function then use zb470_p0_create function.
After upgrade we have tested and found that zb470_p0_create is not calling. We put a brakpoint in the implementation of BBP_DRIVER_DETERMINE it will never stop there. Before it was stopped there.
Can any one have flow how PO will create in backend system in Calssic scenario please share(with function module and BADI names).
Please tell me flow after click on order in SC how PO will create in backend.
Please let me know ASAP..bcoz it is urgent..

Hello venkatesh,
The standard process flow as far as i know are as below:
1. once you order teh shopping cart the workflow asscociated get triggered and shopping cart would go through approval process.
2. Once the shopping cart is approved the status is set to released.
3. With the change of stauts "BBP_REQREQ_TRANSFER is triggered.
4.BBP_REQREQ_TRANSFER internally calls BBP_PD_SC_TRANSFER_INTERNAL for new structure(version of SRM)
5.Badi is called to group the PO if implemented else standard way fo SRM for grouping of PO iscarried.
6.Then SPOOL_PO_CREATE is triggered for backend PO creation.
7. Then FM META_PO_CREATE is called.
8 Then FM META_BAPI_DISPATCH is called.
9. Inside FM META_BAPI_DISPATCH u have the BAPI BBP_DRIVER_DETERMINE Called. if this badi is implemented it will go to implementation of badi and overwrite the FM name with Function module that SAP determine from table "BBP_FUNCTION_MAP".
request you to put a break point at META_BAPI_DISPATCH and check why its not going to your BADI implementation.
10. then the function module from "BBP_FUNCTION_MAP or you badi implementaion is called and proceesed further to result in PO.
If for some reason the "SPOOL_PO_CREATE" fails then a spool job is created which spools the creation of PO for later time.
Hope this is useful to you .
Reward point if helpful.
Cheers
Iftekhar Alam

GET_V Method is not called for custom field

Hi,
We are using CRM 7.0
I have enhanced component BT120H_CPL and added custom fields into view Details with AET. I am trying to implement search help which depends on another field. I have created V-GETTER for my field and tried to implement search help in this method. However, this method is not called in the program scope.
I have debugged the application and result is :
V_GETTER method GET_V_ZZAFLD00000D is created in class ZL_BT120H_C_DETAILS_CN00. It should be called from GET_V_S_EXT method but this method is called in class CL_BT120H_C_DETAILS_CN00 and exception occurs since GET_V_ZZAFLD00000D doesnu2019t exist in class CL_BT120H_C_DETAILS_CN00.
I tried similar scenario : add search help to existing field of another component. However I couldnu2019t able to run GET_V method again.
( It works when I write search help id in the AET but in this way I cannot pass import parameter to it )
Is there anything I am missing ? Thanks in advance for helps.
Regards
Abdul.

Hi,
Then, the next possible thing is checking the "enhancement set". Press F2 keeping the cursor on any field and check if the view is showing up as enhanced. Find this information under "Active Enhancement set" in the popup details. If this does not happen, then your enhanced view is not being used. You may want to check the COMPONENT_LOADING BADI if you are using more than one assignment set. You may also want to look at this WIKI.
[http://wiki.sdn.sap.com/wiki/display/CRM/HowToEnhanceaWebUIComponentinSAP+CRM]
Regards,
Arun Prakash

BADI not access in tcode BP

Hi Experts,
I want to check for duplicate entries in tcode BP in CRM2007. I searched forums and most links specify bupa_addr_check. I created an implementation for this BADI and I am not able to access it. The implementation is active.
I put an external breakpoint in class cl_exithandler in the method get_instance to know the badis/exits being called. Badi bupa_addr_check is not called.
Is there some other way that I have to activate this badi?
Regards,
Abdullah Ismail

Hi Abdullah,
There may some other active BADI implementation for bupa_addr_check.
So just go to se84 -> Enhancements -> Business Add-ins -> Implementation -> give bupa_addr_check in Definition Name.
You will get all the implementation for that BADI.
Now go to se19 and Deactivete all the other implementations.
Then again active your implementation.
Then it should work.
I hope this will help you.
Reward points, if useful.
Regards,
Nitin.

Failover callback not called when listener dies

I need to create a RAC-aware Pro*C application.
I got the preconfigured VirtualBox images with OL 5 and RAC nodes.
The listener is installed on both machines too. They share a single IP address for the listener, which I added to the hosts file:
192.168.56.201 rac-scan.localdomain rac-scanActually, the cluster decides to create a virtual network adapter on one of the nodes and this address is assigned to it and then the listener becomes awailable. When this node dies, the cluster starts the listener on another node.
I don't know, whether it's a proper way. I heard that the listener should be on a separate machine.
But the problem is: when I turn off the node my client program is connected to, the failover callback function is not called. The next oracle operation fails with "ORA-03114: not connected to ORACLE".
I followed http://docs.oracle.com/cd/A91202_01/901_doc/appdev.901/a89857/oci09adv.htm#428924 and https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=415245.1 to create the sample program that registers the callback.
Could it be that the failover only works when the DB service fails, but not the listener?

The problem was bad connection string

In my iPhone 4s, since I updated to the latest iOS 6.1.2 I have noticed that my battery drains very quickly, and that after 15 days after date, I lost the cell signal, I have 3g, but I can not call or receive calls or sms. HELP!

In my iPhone 4s, since I updated to the latest iOS 6.1.2 I have noticed that my battery drains very quickly, and that after 15 days after date, I lost the cell signal, I have 3g, but I can not call or receive calls or sms. HELP!
Sorry for my bad english :S
Please, please help me

Contact the carrier.

Diff... between ALE, IDOC, RFC, BAPI, BADI --- Not clear and clarify

Hi All
    I am learning XI and the difference between " ALE, IDOC, RFC, BAPI, BADI "
    Not clear and when to use what and how in point of XI ?
   Pl..clarify me
Adv..thanks and points
--- Rakesh Behera

Hi
This will expalin you every thing ...pl..go through
The interface concept of the classic R/3 is based on two different strategies: Remote Function Calls (RFC) and data exchange through IDoc message documents. RFC makes direct and synchronous calls of a program in the remote system. If the caller is an external program it will call an RFC-enabled function in R/3 and if the calling program is the R/3 system it will call an RFC-function in another R/3-system or it will call a non-R/3 program through a gateway-proxy (usually rfcexec.exe). BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
The philosophical difference between EDI and ALE can be pinned as follows: If we send data to an external partner, we generally speak of EDI, while ALE is a mechanism to reliable replicate data between trusting systems to store a redundant copy of the IDoc data. The difference is made clear, when we think of a purchase order that is sent as an IDoc. If we send the purchase order to a supplier then the supplier will store the purchase order as a sales order. However, if we send the purchase order via ALE to another R/3 system, then the receiving system will store the purchase order also as a purchase order.
I hope this will help you to understand the difference bet..those
regards
--- prasad

General BADi question:Call BADi in background job/batch input. Possible?

Hi out there,
i'm using thoe following BADi: /SAPSLL/CTRL_SD0C_R3 (Global Trade Service).
But also, this question is a general question.
If we are calling on screen the transaction VF01, the BADi is called correctly.
But unfortunately it seemes that the BADi is NOT called (im not really sure, cause i can't debug the background task) when we are calling a batch input sequence wth f.e. form bdc_transaction VF01 nothing happens.
Maybe BADi cannot be called in a background task? If it's possible, how could it be monitored. Thare isw no spool entry or anything like that!
Any answer can help.
Thank you in advance!
Regards,
Timo
Edited by: Timo Ehl on Apr 14, 2009 7:27 PM

Hi,
generally BADIs are called in background mode. You can use the following trick to debug your BADI. You just need to create an infinite loop in your BADI implementation. Something like this.
DATA: l_a TYPE c.
WHILE l_a IS INITIAL.
ENDWHILE.
Obviously when your BADI is called in background mode then program will get into infinite loop. You can easily connect and debug running programs from transaction SM50. You need to select your background process and go to Program/Session -> Program -> Debugging. You will jump directly into your BADI methos with infinite loop. Then you will just set value to l_a and you will start debugging your BADI. If you can not find any process then your BADI is not called in background mode.
Cheers

Where is BADI CRMXIF_PARTNER_MAP called during BP replication via XIF?

Hi,
I want to debug my implementation of BADI CRMXIF_PARTNER_MAP which is used in BP replication via XIF adapter. After I set a breakpointer in my program, I tried in Tcode BP to save an updated BP, it didn't goto debugging mode. I can ensure that I have done correct configuration for XIF adapter because I found the generated IDoc by using Tcode BD87. And I also try to send generated IDoc out, it also not goto to debugging mode.
So where is this BADI called? In which function or class?
Thanks a lot!
Edited by: lonny Zheng on Jun 10, 2011 1:49 PM

Hi konanki63,
I tried to set external breakpoint in coding, but it didn't work. I tried to use where-used list to find, I can only find that this BADI is called in FM CRMXIF_PARTNER_MAPSEND. But I can't find any other program call that FM again.
Could you give me more tips?
Thanks a lot!

Badi not called - BI

Similar Messages

Maybe you are looking for