Badly need help!!! installing an application that needs classic mode

i'm totally new with mac, got mine 3 weeks ago. . . i have this CD-ROM that i need to install but it says int the instruction that it needs classic mode to install. i've been reading the "classic mode" topic int the MAC HELP. . it says there that i can install the classic mode folder with the installer hardware test disc that comes with the mac, but it has two CDs, i don't know which is the hardware test disc. . .is it the disc 1 or disc 2??? and is there other way aside from this. . and another thing, i read something in the topic that i cannot use classic application in an intel-based comp, does that mean that theres no way i can install this application??
by the way i'm using mac OS 10.4. .

i read something in the topic that i cannot use classic application in an intel-based comp, does that mean that theres no way i can install this application??
That's right.
What is this app? Perhaps there is an alternative that someone can recommend.

Similar Messages

After installing an application that was created using the Application Builder

After installing an application that I created using the Application Builder I get this error if I try to run " ANY " LabVIEW App's that I have built. "Executable Version 7.1.1 doesn't match Resource File 7.1. Check your configuration."
The way that I tried to fix this is to reload LabVIEW 7.1 and DAQmx 8.0. I am using two NI-6528 switch cards.
After I reload LabVIEW and DAQmx I can run my applications but as soon as I install one on this development machine the error begins again.
The executable that I built works fine on the development machine and any other machine that I try it on but it appears that the Run-Time engine 7.1 becomes corrupt after I run setup.exe for the newly created application.
I have built numerous Installers, setup.exe's in the past without this error. Just this latest one caused this problem to start.
I can NOT upgrade to 7.1.1. I am doing work for many different sections of this factory and I can not force them to upgrade. I've asked. Others supply code for the same machines using LabVIEW 7.1.
I am stuck creating executables and manualing moving the correct files to the target machines.
What can be done?

No. The KB article was talking about a machine with 7.1.1 installed. I have LabVIEW 7.1 installed.
The machine that I am having trouble with is my development machine. LabVIEW 7.1, DAQmx 8.0.
If I build the executable all is fine. I can still run old executables including the one I just built.
If I create the installer all is fine. I can still run old executables including the one I just built.
When I install the app on my development machine the corruption occurs. I can " NOT " run old executables including the one I just built. The subject error pops up.
I have not moved any executables to the other machines yet. I don't want to corrupt others.

I NEED CLASSIC MODE AND I CANT UPGRADE!! HELP!!

So i just bought a new mac mini about a week ago and I am very excited to start using my copy of adobe photoshop cs2 again, but i have a copy of adobe photoshop 6.0 and i use and upgrade to go to photoshop cs2. I just found out that i cant install photoshop 6 because mac no longer supports classic mode! so how do i get classic mode with out having to downgrade to mac OS 9? is there another way around this?? I don't want to have to buy a 600 dollar copy of photoshop just to use the copy's i already have!

jflanders128 wrote:
...I don't want to have to buy a 600 dollar copy of photoshop just to use the copy's i already have!
You may want to learn about upgrade pricing. It is unlikely that you paid $600 to upgrade Photoshop 6 to CS2.
Beware that CS2 was written for PPC processors. You have an Intel processor and Apple hints that a coming Lion may not support PPC apps. You might want to upgrade to CS5 while you have the opportunity before you fall out of the upgrade window (when CS6 arrives). CS5 is written for Intel.

Need Help With An Application That Produces Live Images Within Tilelists

At the moment I have an application which is meant to produce live thumbnail images of websites. Currently how it does this is a html component (myhtml) loads websites via it's location property changing from website to website and upon fully loading of each site a "snapshot" is taken of the html component and saved as a bitmap and applied as the source of an image corresponding to that particular site (abcnewsimage and bbcnewsimage). However I now need to insert these snapshots within the 'icon' properties of 2 array collections (myTilelistAArrayCollection and myTilelistBArrayCollection) which act as dataproviders to populate 2 tilelists (mtTilelistA and myTilelistB).
Basically I need the same images to appear automatically within the tilelists the way they do in the 2 images as the snapshots are taken by applying the same bitmaps into the currently empty 'icon' properties of the 2 tilelists i.e. the icon of the ABC News Item of both array collections must be the same as the abcnewsimage and appear as it appears and the same for the BBC News Item icon being the same as the bbcnewsimage picture as that appears.
It should look like the images are appearing in the tilelist at the same time as they are appearing in the regular images. What will I need to put into the icon properties to do this?
I hope this makes sense and if anyone can help me out it would be much appreciated. :-)
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication
xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" verticalAlign="middle" backgroundColor="white" width="1024" height="768">
<mx:Script>
<![CDATA[
import mx.graphics.ImageSnapshot;
import mx.collections.*;
private function takeSnapshot(event:Event) :void{
var imageBitmapData:BitmapData = ImageSnapshot.captureBitmapData(myhtml) ;
switch(myhtml.location){
case "http://abcnews.go.com/":abcnewsimage.source =
new Bitmap(imageBitmapData);myhtml.location =
"http://news.bbc.co.uk/";
break;
case "http://news.bbc.co.uk/":bbcnewsimage.source =
new Bitmap(imageBitmapData);
break;}
private var myTilelistAArrayCollection:ArrayCollection = new ArrayCollection([{id:
"ABC New Item", label:"ABCNews", icon:""},{id:
"BBC News Item", label:"BBC News", icon:""}]);
private var myTilelistBArrayCollection:ArrayCollection = new ArrayCollection([{id:
"ABC News Item", label:"ABCNews", icon:""},{id:
"BBC News Item", label:"BBC News", icon:""}]);
]]>
</mx:Script>
<mx:HBox x="10" y="10">
<mx:Image id="abcnewsimage" width="100" height="100" scaleContent="true"/>
<mx:Image id="bbcnewsimage" width="100" height="100" scaleContent="true"/>
</mx:HBox>
<mx:HTML id="myhtml" location="http://abcnews.com/" complete="takeSnapshot(event)" width="250" height="250" horizontalScrollPolicy="off" verticalScrollPolicy="off" x="10" y="118"/>
<mx:TileList x="268" y="118" width="294" height="250" id="myTilelistA" dataProvider="{myTilelistAArrayCollection}" rowHeight="100" columnWidth="100"/>
<mx:TileList x="570" y="118" width="294" height="250" id="myTilelistB" dataProvider="{myTilelistBArrayCollection}" rowHeight="100" columnWidth="100"/>
</mx:WindowedApplication>

Cheers Flex harUI. From what I can see superimage is mainly used to keep images at better quality. What I'm concerned with is having the images set within the 'icon' properties of the 2 tilelists AS they are set within their specific images. I've tried databinding by doing this for example:-
{id:
"ABC New Item", label:"ABCNews", icon:"{abcnewsimage.source}"},
I hoped that would cause the icon field of the array collection to be populated by the source of the abcnewsimage so that as the abcnewsimage is populated by the snapshot that is taken of the abcnews website the icon field of the abc news item in the array collection would be too so that furthermore the tilelists would then be populated by these images. Basically as each snapshot appears in it's specfic image it needs to be loaded into the icon property of the array collection too. In the end the icons should look as if they are appearing within both the tilelists the same way as they are appearing within the images if that makes sense. The images should be loading within the tilelist one at a time as they are in the regular image components.

Need to install an application that is dependent on variable input

Hi
So I am working on a deployment that installs an application. The environment that this application is installed in varies. So the user must be able to enter variable values in the first splash screen that appears. And the installation should pick up these
variables and use them as parameters for the installation. I handle this as follows:
1. Prompt the user for the variable value at the beginning of the winPE phase(The screen where you select TS, enter admin password etc)
2. Create an Run command line step in the TS and run the following command line:
.\applications\Setup.exe /Variable1=%VariableFromWinPEHere%
Is this possible in MDT? As I am used to work with SCCM.
If this is not the way to approach it, how should i approach it?
Also bonus question: How do I get MDT 2013 to prompt for a variable that is available through the whole OS installation?
Thanks!

Thank you for you reply :)
As you say "Once you create an MDT variable it will be available throughout the entire MDT build."
How exactly do I create an MDT variable? And how do I get it to prompt for it during the winPE phase?
Can I just put in an empty put in an empty "Set TS variable" step in the TS and MDT will prompt the user for the value?
I am looking for something like collection variables in SCCM 2007. When you left the variable without any value it would prompt you for it before executing the TS. Also I need these prompts to appear based on what TS you choose.

Problems with installing my application that weights 360 Mb

I have already wait 28 hours and I still see Install Application page. Any ideas?
I export it in 10g EE and would like to import it to XE.
Best Regards, Kostya Proskudin!

I don't know why, but my application weight 360 Mb.
I use XE, without Apache.
Is it really possible to run export file in SQL *Plus? Does it need any parameters?
P.S. There is the application statistic:
-- Pages: 50
-- Items: 338
-- Computations: 1
-- Validations: 65
-- Processes: 133
-- Regions: 250
-- Buttons: 122
-- Shared Components
-- Breadcrumbs: 1
-- Entries 32
-- Items: 27
-- Computations: 0
-- Processes: 5
-- Parent Tabs: 7
-- Tab Sets: 7
-- Tabs: 16
-- NavBars: 4
-- Lists: 18
-- Shortcuts: 2
-- Themes: 18
-- Templates:
-- Page: 162
-- List: 254
-- Report: 126
-- Label: 90
-- Region: 383
-- Messages: 15
-- Build Options: 0

Application that requires Classic but there's no box to uncheck!

I am using Tiger (updated) and there is an application I am trying to open (it's a medical cd-rom, LCP-system, an interactive presentation of a product) that informs me to start Classic.
I don't have Classic, so the system tells me that I don't have a Mac OS 9 folder and it quits.
When I click 'get info' on the app, it says 'kind: application (Classic)', but there is no box 'start in classic environment' to uncheck!
How can I open it without installing Classic, which I don't have nor need in any other situation nor want?
Thank you for the interest.

And another thing.
As with many other problems I encountered since switched to macs (1 month ago) I realised that part of the solution can be found on your own , or in the manuals. But when switching from PCs you have the idea and the expectation that macs don't crash, and in general don't have the same problems. So, if one appears, first, you don't know your way out even to system properties, prefs, etc. and then , you think that if something like that happened to a machine like this one, maybe I shouldn't just e.g. delete the main folder of an operational system , aha!

Classic mode web application in SharePoint 2013 Error occurs

while creating Classic web applicatiuon using powershell commands following error occure
PS C:\Users\centraluser> New-SPWebApplication -Name "SharePoint - 100" -Applicat
ionPool "SharePoint100" -AuthenticationMethod "NTLM" -ApplicationPoolAccount (Ge
t-SPManagedAccount "wse\centraluser") -Port 100 -URL "http://w8-sp13-en"
WARNING: The Windows Classic authentication method is deprecated in this
release and the default behavior of this cmdlet, which creates Windows Classic
based web application, is obsolete. It is recommended to use Claims
authentication methods. You can create a web application that uses Claims
authentication method by specifying the AuthenticationProvider parameter set in
this cmdlet. Refer to the http://go.microsoft.com/fwlink/?LinkId=234549 site
for more information. Please note that the default behavior of this cmdlet is
expected to change in the future release to create a Claims authentication
based web application instead of a Windows Classic based web application.
log4net:ERROR XmlConfigurator: ConfigureFromXml called with null 'element' param
eter
log4net:ERROR XmlConfigurator: Failed to find configuration section 'log4net' in
the application's .config file. Check your .config file for the <log4net> and <
configSections> elements. The configuration section should look like: <section n
ame="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler,log4net" /
>
New-SPWebApplication : Object reference not set to an instance of an object.
At line:1 char:1
+ New-SPWebApplication -Name "SharePoint - 100" -ApplicationPool
"SharePoint100" - ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...PWebApplication:
SPCmdletNewSPWebApplication) [New-SPWebApplication], NullReferenceExceptio
n
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPWeb
Application
PS C:\Users\centraluser>

use of classic mode authentication, also known as Windows classic authentication, is discouraged in SharePoint 2013 according to
MSDN.
Office Web Apps can be used only by SharePoint 2013 web applications that use claims-based authentication. Office Web Apps rendering and editing will not work on
SharePoint 2013 web applications that use classic mode authentication. If you migrate SharePoint 2010 web applications that use classic mode authentication to SharePoint 2013, you must migrate them to claims-based authentication to allow them to work with
Office Web Apps. For more information, see Use Office
Web Apps with SharePoint 2013.
I would suggest to create claims based web application. Any specific reason you are looking for Classic mode?
Raghavendra Shanbhag | Blog: www.SharePointColumn.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.

How can I build a LabView application that uses the 2012 runtime, on a development system with LabView 2013 or 2014 installed?

I need to build a LabView application .exe to run with the 2012 Runtime, for legacy support. I currently have LabView 2013 installed on my development system, and have 2014 available. How can I build an application that uses the 2012 runtime on this development system? Do I have to downgrade to 2012? Thank you.

We have existing customers that have installed our application that was originally built with 2012 (provided by a contractor that is no longer available). Due to IT regulations, it is far easier to update these customers by simply replacing the .exe file, than creating an install that their IT department must run.
If I have to downgrade to LabView 2012, where can I get the installation for this?

Installing multiple applications through one application (or package)

I am trying to make an application (or package) that will install multiple programs through the one application. Right now the only way I can see to do this, is to force an application to install another one as a requirement. The easiest example
I can give is iTunes. We customize the iTunes install to lock down features and not install every application that isn't needed in our environment. So technically iTunes actually installs 5 different programs. I need to be able to select
iTunes during an OSD deployment using the MDT UDI Wizard, and it will install iTunes and anything needed for it to work correctly.
I am just using iTunes as an easy example to explain. We have other programs that work in a similar way, or require other applications to be install. My main reason for this request is we have standard engineering applications, but I don't want
them installed on all computers, I want just one option that will in turn install all the standard applications.
I am guessing what I will have to do, is make one install that requires the previous application and installs it, and do that for each application, but this doesn't seam like a good solution as it means I will have to have a separate application only for
this OSD problem.
Is there an easier/correct way of doing this, mainly for OSD?
Thank you,

Dependencies only forces the box to be checked, it doesn't install it in the correct order. We are having another problem in that area. We have an Office add-on that in SC requires a version of office to be installed. We can't set the dependency
for that add-on since we have multiple versions of office, but even if a version of office is selected, it doesn't try to install it before it tries to install the add-on. So the add-on install ends up failing since office isn't installed when it tries
to install, even though it installs afterwards.
This is why I am not considering using dependencies since I can't get it to install in the correct order. If there is a way to enforce the when something gets installed, then yes, this would work for me.

Changing the application that a file type opens with

I have MSFT Excel and Subethaedit installed...
I want Subethaedit to open all "*.spad" files
I go to "Get Info" then go to "Open with:" then choose Subethaedit
Then I press "Change All...", a dialog pops up and asks if I want to apply the change to all documents of the form "*.spad", and I answer "continue" and then...
It ignores me; it drops Subethaedit from the list of apps to "Open with" and doesn't change the default format.
How do I force the type to change to the app I want? Is there a text-file I can munge somewhere?
mac mini Mac OS X (10.4.8)

Hi, thechao. Welcome to the Discussions.
It's possible your launch services database is corrupted. See my "Resetting Launch Services" FAQ. Then try the procedure you defined earlier, which is also described in "Mac OS X 10.4 Help: Changing the application that opens a document."
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Can you still install OS 9 (for classic mode) on Leopard?

I have Tiger running on one of my PPC G5 machines. My son has the They Might Be Giants "No" CD that has an interactive game. I believe I can install OS 9 so that it sees it when running the game in classic mode. We are thinking of upgrading that mac to Leopard. Once I do that, will classic mode still work. I realize with Intel, OS 9 is dead, but since we still have the old PPC mac, I would like to be able to use it. If there is a better spot to ask this question, please let me know.
Thanks

You can't run Classic on Leopard even on a PPC Mac, but what you could do is create and maintain a bootable clone of your current Tiger system on a FireWire external drive. You could then boot the G5 from the Tiger clone when you wanted to run a Classic app.

TS2446 Hi! I tried to update a few apps from AppStore and to install new applications, but i got a message : " your Apple ID HAS BEEN disabled" !!! Please help me!!! What can i do now? How can i use my Apple ID? Please, i need help, i have this ID for 2de

Hi everyone!
I tried to update a few apps from my iPhone, and to install new applications from APPSTORE. But i got a message :" Your Apple ID has been disabled"!!!!!!
What can i do now? Can you help me please?
The same thing happend with my IPAD....
How can i do to function all this in the same way which was working till this problem appears.
I want to mention that i have 2 email adresses asociated with the same Apple ID.
wait for an feedback!
Thanks a lot!

Depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If it then works on your computer's iTunes but not your phone/iPad then try logging out of your account on the phone/iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it

I recently got iphone 4 , yesterday i was trying to install an application from the itune store it say that i need to authorize it ( i already have an account and bought some apps ) how can i authorize the device ?

i recently got iphone 4 , yesterday i was trying to install an application from the itune store it say that i need to authorize it ( i already have an account and bought some apps ) and there was a CLICK HERE BUTTON , when i press on it it take me a to a page that require some kind of activation code or smthn like that ,
how can i authorize the device ?
and btw i bought it from UAE store
IOS 4.3.2

You should only make purchases for all your devices using a single Apple ID. There is no need, and indeed a good reason not to, set up a new Apple ID with each new device purchase. While items purchased under different IDs can be played on a single device, you cannot merge Apple IDs and it makes it cumbersome.
Apple IDs do not expire but may become dormant and require reactivation if they are not actively used.
You should make note of your Apple ID and passwords and keep a record of it. Like a bank account it contains access to items with value. Update your Apple ID email address as they change.
I see you were guided to this forum by a help page on recovering your password. If that is not sufficient try the links below. Apple will need to verify you are indeed to owner of the accounts to which you are trying to gain access.
http://www.apple.com/support/appleid/contact/
Contact Apple for help with Apple ID account security - http://support.apple.com/en-us/HT5699 "This article provides country-specific Apple Support contact information for customers seeking help with their Apple ID password or other security-related issues."
Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37

Help needed in installing orale application 11.5.10 on Linux

Hi
i am getting some problems.
I have dump of entire oracle applications software in my hard disk. I doesn't have DVD's. And i think i doesn't need to run perl script before installing appliations. When i install oracle applications from hard disk .. it gives me a successful installation . But later i am unable to connect to database or and linux is unable to recognize the sql command or envionment variables are not working. I am trying to install on stand alone machine. Please help me out/???
thanks in advance.

I create soft links via ln -s to the environment scripts:
lrwxrwxrwx 1 oracle dba 43 2005-02-10 20:29 vis9.env -> /lv03/oracle/vis9db/9.2.0/vis9_socrates.env
lrwxrwxrwx 1 applmgr appl 33 2005-02-10 20:27 vis9.env -> /lv03/oracle/vis9appl/APPSORA.env
So in oracle user home directory, I type ln -s /lv03/oracle/vis9db/9.2.0/vis9_socrates.env vis9.env
Then just type . vis9.env to take on the database environment as the oracle user.
In the applmgr home directory, I type ln -s /lv03/oracle/vis9appl/APPSORA.env vis9.env
Then just type . vis9.env as applmgr, to assume the applications environment. You will need to be in this environment to start/stop the applications.
cd to $OAD_TOP/admin/scripts/*
to stop:
./adstpall.sh apps/apps
to start:
./adstrtal.sh apps/apps
.

Badly need help!!! installing an application that needs classic mode

Similar Messages

Maybe you are looking for