Bank communication manage rule definition

I was told that our bcm AP rule: for amount greater than 5000 USD, need someone to approve, but when I go to the system, I didn't find value 5000 USD there, is it defined in somewhere else? attached is the screen, I want to define rule 5000_TR_1 with amount above 5000, how to define 5000 USD limit?

Hello Jolin,
Here you have to add the amount limit as shown the screenshot then only the concern approver can able to approve if the valuse is >5000USD.
I hope it helps else revert us with your query.
Thanks & Regards,
Lakshmi S

Similar Messages

  • Payment Rule maintenance per currency in Bank Communication Management

    Hi,
    We have maintained Rules for Payment Grouping in Bank Communication Management based on amount limits. The basic currency we expected is GBP so we have the same set of amount limits for all Company Codes until now.
    We've now introduced a new Company Code which makes payments in USD. We'd like the same amount limits to be used for payments from this Company Code too.
    Eg: We have a rule for amount range from 100K to 150K. If the payment is in GBP the rule gets picked up if the payment amount is between 100K GBP and 150K GBP.
    Now if a USD payment is made of 130K USD, the above rule gets picked up. We would like to see that the GBP equivalent of 130K USD... i.e. 205K USD is considered as the amount and a suitable rule is picked up.
    How do we achieve this in the rule definitions? I see that the Currency field limits the rule to be considered only for payments made in one currency. Is there a way of associating the amount limits to a base currency so that other currency payments will get converted against this currency and be evaluated?
    Would appreciate any help in this regard as we're at a loss currently.
    Thanks in advance.
    Madhu

    HI
    Can you verify your payment run log? are there any payments available or not
    Reg
    Vishnu

  • Bank Communication Management - Incoming messages from Banks

    Hi,
    We are using Bank communication management. When we send our ACH and Wire files to the bank, the bank sends two confirmations: 1. First confirmation says that the file is received. 2. Second confirmation sends the total number of items and total amount in the payment file.
    I have done the necessary configuration in BCM in the step shown below:
    Financial Supply Chain Management ® Bank Communication Management ® Payment Status Management ® Map External Status to Internal Status
    How do I update this in the payment monitor (T-CODE - BNK_MONI)?
    SAP says
    You must connect the XI system to the ERP system. The interface Collective Payment Order Notification must be set up. What is this interface 'Collective payment order notification' and where should I set it up?
    Any help in this regard is greatly appreciated.
    Kalyan

    Hi Ankish,
    As mentioned by Kalyan above (check suggestions from SAP in his comment), you should use the interface Collective Payment Order Notification given by SAP in ESR (Enterprise Service Repository) SAP APPL (SAP APPL 6.05). If your PI environment doesnot have it then you need to request yuor basis to download this from SAP.
    After you download the ESR , you can find the standard Service interface called "CollectivePaymentOrderNotification_In" under Namespace http://sap.com/xi/APPL/Global2 .
    Now once you have this interface downloaded,  create a new message mapping using the message Type "CollectivePaymentOrderNotification_async" as Target,  and your message  from BANK or SWIFT (uploaded into PI as external definition) as source. Map the required fields , mainly map the external status code from BANK to ExecutionStatusCode field. Also map the required header fields.
    Once you create the new mapping , create required Integration builder objects and you are all set.
    The CollectivePaymentOrderNotification interface is proxy in ECC which has required methods to update the BCM with the status.
    Also please check below links for more information.
    http://help.sap.com/esoa_erp2005_ehp2/helpdata/en/46/802b59e186429ee10000000a1553f7/content.htm
    http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/22/e-payment-a-customized-solution-other-than-sap-integration-package-swift-part-3-receive-from-bank-push-to-sap-bcm
    Regards,
    Suresh

  • Workflow for Bank Communication Management

    Hi ,
    I need to find out any SAP workflows are responsible for the below activities in Bank communication management .
    spro-Financial Supply Chain Management- > Bank Communication Management -> Release Strategy -> Change and Release ->
    Assign Role to Release Steps  , Here i am assigning rule - 96000144 against Rel Obj  BNK_INI .
    In pfac for rule 96000144 , i am assigning responsibilities where i am maintaining Agents ( User IDs ) .
    The rule IDs  specific to amount limits are maintained in SPRO under Financial Supply Chain Management- > Bank Communication Management ->  Payment Grouping
    When in t code bnk_moni , for Bat No , the approver list has to be displayed .
    If anyone has any idea on Workflow related to Bank Communication Management , suggestion will be highly appreciated .
    Regards
    Prabhudutta

    Please check OSS 1041016, it contains documentation on BCM WF setup.
    Rememeber that release WF is needed only if you have more than one release step - first release step is always done via BNK_APP, at the moment it's hardcoded in BCM (if you have all the latest patches).
    WBR -
    Pauls

  • SAP Bank Communications Management

    Hi
    I wonder if anyone can help?  We are currently exploring with our bank using their facility for transmitting Payment Files directly to them through a secure transfer and also retrieving Statements, Forecasts, Acknowledgments and Rejections.  The Payments files, Statements and Forecasts will use standard formats such as MT103/940 etc.
    What we want to achieve is integrating with SAP using some standard functionality that will allow the Cash Management team an easy way of monitoring and controlling the payments.
    Can anyone clarify whether the Bank Communication Management tool can be used for the above scenario or will it only allow you to use it if you have a direct connection to SWIFTnet??
    Thanks in advance
    Adam

    Adam,
    You are right. BCM is the tool. What  BCM can do is:
    1. Batch payment runs into batches as per your requirement. For example you run say F110 10 times a day for EFT. Based on the BCM rules you can combine these 10 Payments runs into one or more batches
    2. After having batched the payments, you can view them in BCM payment monitor.  with the current status. From here you can drill down to the payment run and view the paid items.
    3. After you receive ACK/NACK (Acknowledgement or rejection notices) message from SWIFT you can update this monitor and your Treasury/Cash management people can view this status. You can also set 'alerts' in case of rejection so that the responsible person can get an email and he/she can take immediate action.
    4. Treasury/Cash management can also approve the payment, depending on cash availability stop the payment and can release it the next day once they have money. By this you are not reversing the payment, but it is just kept pending in BCM.
    Kalyan

  • Create/Merge batch for HR payroll BCM (Bank Communication Management)

    Hi All,
    This with reference to BCM (Bank Communication Management) EHP4
    How to create/Merge batch for HR payroll in BCM?
    Thanks in advance for your support
    Regards,
    MS

    Hi MS,
    First go to t-code 'OBPM5 -'Reservation for cross payment run Payment media' and reserve a Prefix for HR payment runs.
    Then in IMG maintain a rule for HR payment runs:
    In IMG go to Financial Supply Chain Management > Bank Communication Management > Payment
    Grouping > Rule Maintenance
    Here if you want to select all HR payments into one merged payment run just select 'Merge ID' as the selection criteria. You can also include multiple rules to merge them separately. For example if you want to put all HR payments below USD10000.00 into one payment run and all others into another payment run then you can create two rules or one rule with two selection critera.
    It is very flexible. If you want I can send a SAP's cofig guide.
    Kalyan

  • Bank Communication Management - Transfer between accounts

    Hi,
    I am looking at the possiility to implement the BCM, however in a simple transfer between accounts that not have payment request and the file is generated by correspondence, I cannot reflect this in BCM. It is possible?
    Thanks,
    Regards

    HI Marques,
    Bank Communication Management is mainly for integrating to external banks / Merging of payments/ Payment approvals. For transferring of payments from one bank account to another bank account use repetitive code setup.
    For more information refer to below link
    Maintain Repetitive Codes - Bank Accounting (FI-BL) - SAP Library
    Regards,
    Naresh Garla

  • Bank Communication Management in different SAP system

    Hello guys,
    Right now at our client's company we have a total of 7 servers with SAP running on all of them, but only one of them(the central server "A") has BCM. The rest of the servers maintain RFC communications with it.
    Our goal is to centralize all bank communication interface management from payments coming from all servers in server "A".
    Does BCM support this, maintaining BCM management from a foreign system? I am guessing you could achieve this (for example) when you run F110, sending payment output via RFC/IDocs from server "X" to server "A"and back.
    I would really appreciate your comments on this,
    Thanks!
    Julia

    Hi Peter
    Check out this documentation (also it is a bit old) but it talks about using one standard FM in RFCs for
    for Call transaction .
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/BCFESDE5/BCFESDE5.pdf
    Regards
    Neha

  • Bank communication management- FBPM1 does not group if company codes differ

    Hi SAP Gurus
    I am trying to batch payments across company codes provided the house bank remains the same as it is the same file format.  But when I run FBPM1 it always splits the file as 2 files even though the house bank is the same with same payment method.  I think this is a limitation due to variant maintanence across company codes in OBPM4.  Is my understanding right?
    Is there a way to batch payments across company codes provided the house bank is the same?
    Thanks
    Regards
    Morgan

    Thanks for posting this!
    I would only mention that your definition is incomplete for this -
    Contextual selector A type of Style Sheet Selector that
    and that it's most often referred to now as a Descendent selector, not a contextual selector.  It's basically the same as the Compound selector that you have already defined....

  • SAP Bank Communication Manager without PI

    Hello!
    We are currently implementing and configuring SAP BCM in our system and we are starting to reach the point where messages are being sent from BCM to bank. Every single piece of documentation we've been able to find points to the necessity of PI, but we are trying to avoid the use of PI altogether.
    In our system we have a legacy web server that hosts several critical web services and we hoped we could use this web server to create another service that would receive payment medium files and then forward them to bank. How could we achieve this? Configuring custom destinations for BCM wasn't part of any documentation we could find. Can our wish be fulfilled at all?
    Additionally, if we want to send these payment medium files to our web service then we have to wrap then in some kind of SOAP envelope. Is there a place (enhancement spot) where we could modify this payment medium before it is sent from BCM?
    Thank you for your help.

    Looks as if noone has experience with this kind of BCM implementation. Or another option is that it just can not be done.

  • Bank Communication Manager

    Hello all!
    we are going to implement BCM. But I have a question regarding interfaces. In general direct debits and credit transfers will be generaten weithin SAP. But we have also companies which do not use SAP and create the Credit Transfers ob their own.
    IS it it. possible to import those Credit Transfers into BCM and send them to the bank via Erics? If yes, how? Or do I have to create an import way via PI to BCM?
    It WOULD be nice to hear anything shortly
    kind regards,
    Michael

    Hi Michael,
    Generally BCM is used to batch the payments and monitor the payment status along with Authorizing payments.
    The approved batches will be fwded to the concerned house bank. One way to do this, is routing the encrypted payment file to SWIFT network ( through service provider) and through XI/PI system.
    i think the non-SAP generated transfers can't be integrated directly with BCM, but however transferring them through XI/PI to external network is feasible though much technical effort is needed. Just a guess.
    Cheers,
    Ravish

  • Bank Communication Management

    Hi,
    I am working on BCM module. I have created 5 rules out of which one is automatic approval and the rest need dual approval.
    When I go to BNK_MONI transaction, i see that FBPM1 has created 5 different batches as per the rules defined. Out of the 5 one got approved automatically and the payment medium file is also created for this batch. For the other 4 I need to approve before the payment medium file gets created.
    When I  go to BNK_APP to approve, I do not see these 4 batches. What could be the reason?
    Appreciate any help.
    Thanks
    Kalyan
    It was a problem with setting of the workflow. Our technical team went through OSS Note 1041016 and fixed the problem and it worked fine.
    Also OSS Note 1577912 - FAQ on BCM - is also a very useful tool in trouble shooting various aspects of BCM.
    Thanks to all.
    Kalyan
    Edited by: Kalyan on Mar 9, 2012 1:22 PM

    Hi Ravi,
    We are implementing BCM now in our company. I would appreciate if you can share your experiences. I would, in particular, like to know what are the benefits of using this module.
    Kalyan
    Edited by: Kalyan on Jan 11, 2011 5:50 PM

  • SAP Bank Communication Management: Payment rejected by bank

    Greeting
    I would like to check, when the payment instruction is approved and payment medium file is generated. You received an alert from the bank that the payment is rejected,
    Instead of perfoming T.code: FBRA, how do you do that in BCM?
    regard

    Hi Juan,
    If the batch is created in BCM with file id. Use the fileid to reverse the batch using BNK_MERGE_RESET transaction. This will reverse the batch. Again can use FBPM1 for batching.
    But if bank rejected due to data issues, then check the dmee and correct the data before FBPM1.
    Hope this helps.
    Regards,
    Ravish

  • Bank Communication Management (BCM) - File Formats

    Hi, I wanted to know the file formats in which I can generate files from a BCM module.
    I read that standard SAP Idoc is not supported; can someone help me with the formats supported or confirm if Idoc is supported now.
    Can someone share with me the technical architecture of BCM and the available connectivity with SAP PI.
    thanks and regards

    Hi
    All the standard PMW (payment medium workbench) formats are supported in BCM.
    Have a look at the T Codes OBPM1/ OBPM2/ OBPM3/ OBPM4. You can find various formats.
    You can find the documentation for the same in the below path:
    SPRO>IMG>Financial Accounting (New) -->AR/AP --> Business Transactions --> Outgoing Payments --> Automatic Outgoing Payments --> Payment Media --> Make Settings for Payment Medium Format from PMW.
    For instance, you can use ACH format for US payments.
    Regards
    Srini

  • Bank Communication Management without SAP PI?

    Hello @ll,
    i've implement BCM in my Backend-System and it works great with SAP Process Integration.
    Now there is one question.
    Can i work with BCM without SAP PI and therefore use IBM WebSphere Middelware?
    Have anyone experience?
    Thanks a lot.
    regards
    armin

    Looks as if noone has experience with this kind of BCM implementation. Or another option is that it just can not be done.

Maybe you are looking for

  • Is there a way to auto populate one field based on a selection made in another field?

    We want to enter an account number and have the account name field auto populate.

  • Custom.dll in forms 4.5

    Can someone give me an example of personalization of custom.dll to modify the list of value on a field ? I'm in forms 4.5 and Oracle Applications 11.0.3 Regards.

  • All about field dominance

    i've been reading about field dominance and feel it may be contributing to my video looking crap when i play my dvd in a standard player. on some posts people recommend finding out which field the footage was captured/rendered in. how do i find this

  • Compare two members from the same dimension in HFR

    Hi, Is it possibe to compare two members from the same dimension in HFR? The requirement is to compare Year and Week members from the same dimension. The Week date will be selected from POV. The corresponding Year date should be displayed in the repo

  • How to draw an image onto a canvas3d?

    hi, i managed to draw onto a canvas 3d overwriting postRender() of canvas3d.   public void postRender()     J3DGraphics2D g = getGraphics2D();     //  TEST BEGINN       Image pic = this.getToolkit().createImage("Graphics" + File.separator + "start2.p