Bank Key giving error for ECC to CRM replication

While replicating BPs from ECC to CRM, the following error shows in the BDoc:
"Bank XXXX-YYY for Country ZZ does not exist"
To the best of our understanding, the Bank (branch: XXXX-YYY) detail is not available in the CRM, but where to make in CRM or why should it not be replicated from ECC when the same is created in ECC in the first instance itself.
Seek your guidance please.
Regards,
Tariq

Dear Leon,
Thank you for your advise and after going through the same I have the following to share with you:
Make sure that the Bank Key,Bank Key - FI01 Bank master creation is maintained .....
>>>>>>>> Yes maintained.
After maintaining it,try to replicate using PFAL.
>>>>>>>> For replicating what "object type" should I choose from the list, though i couldn't find any of the drop down entries having "Bank" or likewise. hence what object type to select for replication?
And check in BD64 whether the distribution model is maintained correctly.
>>>>>>>> I checked but couldn't find the mention of any bank in the model views available there related to HR / CRM:: "HRALECRM" or "ZHRCRMWFM"...........hence kindly advise where and what for should I look for?
"................., it is possible that bank data is not distributed, because the system to which the bank data is to be sent is not available or the settings in Customizing are incomplete or incorrect. Check SPRO
>>>>>>>> Checked, system is maintained.
Thanks!
Tariq

Similar Messages

IW32- order-print is giving error for particular User.

Dear Friends,
IW32- order-print is giving error for particular User and output type. Debugging authorization restricted on the system, hence I canu2019t trace out the problem. If anybody comes across such issues, please reply to the post.
Thanks In Advance for your reply.
Anil Dasari
Thanks In Advance.

Hi,
Information about dump:
1. User and Transaction:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          06.05.2011 10:47:40
     MM Used. 13116304
     MM Free. 3639760
User and Transaction
     Client.............. 700
     User................ "BLADEF01"
     Language key........ "N"
     Transaction......... "IW32 "
     Transactions ID..... "4DC387ECA12B684DE10000001A5B1803"
     Program............. "/MRSS/SAPLRSG_PM_ORDER"
     Screen.............. "SAPLCOIH 3000"
     Screen line......... 33
Information on where terminated
     Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
      "/MRSS/RSG_MAINTAIN_MRS".
     The main program was "SAPLCOIH ".
     In the source code you have the termination point in line 441
     of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
2. Info. Where it got terminated.
Information on where terminated
    Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
     "/MRSS/RSG_MAINTAIN_MRS".
    The main program was "SAPLCOIH ".
    In the source code you have the termination point in line 441
    of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
3. How to correct the error.
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "/MRSS/SAPLRSG_PM_ORDER" or "/MRSS/LRSG_PM_ORDERU04"
    "/MRSS/RSG_MAINTAIN_MRS"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1.1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2.2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3.3. If the problem occurs in a problem of your own or a modified SAP.
I have been searching for notes recently implemented for IW32.
Thanks and Regards,
ANIL DASARI

Item Open Interface giving error for Org Assignment

We ran the MTL_SYSTEMS_ITEMS_INTERFACE & loaded all the items at master level.
We are having issues in setting at Org level. Cant figure out what the issue as only few records gets assigned & then garbage sets in for remaining records. An SR has been raised & the tech support representative was saying that UOM's are different at master & org levels. Never heard of this issue earlier. I have worked with UOM's different at Master/Org levels.
The UOM's are different at Master & Org Level and in some cases the UOM are different for different Orgs. Attribute Control for Primary/Sec UOM is at Org level. The UOM's belong to the same UOM Class. There are standard conversions defined for all these UOMs.
Any pointers for quick resolution ?

Pl do not post duplicates - Item Open Interface giving error for Org Assignment

MySite – My Content Page is not working and giving error for existing customers

We are using SharePoint 2010 and recently moved to SharePoint 2013. Central Admin run under SP 2013 and Content Db Front End run under SP 2010.
After migration the MySite – My Content Page is not working and giving error for existing customers (http://mysite.ss.com/_layouts/MySite.aspx?Error=4705).
New users (after migration) are able access the My Content and adding documents but old users can’t.
Can anyone help me on the above?

I think you might be using non claims web app in 2010, if that is the case, you 'd need to convert your existing users to claims users for which you can refer to http://technet.microsoft.com/en-us/library/gg251985(v=office.15).aspx
to check if your exisiting users are claims or classic users , try
get-spuser -web http://mysite.ss.com -limit all
check in the output if you see the claims GUID in form of user names like i:0#.w|domain\username, if yes, they claims users if you just see Domain\username, you want those users to be converted to calims.
i'd need more details to be specific about my answer but aforementioned scenario is most common of all, hope this helps,
Thanks, Noddy

Can the same Bank Key number be for different SWIFT codes?

Can the same Bank Key number be for different SWIFT codes?

hi
once u have cancelled the challan this number will not be avaiable for the posting.
when u repost a different number will be avaiable for the posting.
hope this is clear assign some points.
with regards
Krishna Singareddy

Equipment Replication Error from ECC to CRM

Hi,
We are trying to replicate the Equipments form ECC 5.0 to CRM 2007 facing some error in CRM like inbound queue is not generated and our queue generated with status SYSFAIL error massage is u201CBAPISTRUCTURE_NAME_UNDEFINIEDu201D. I checked in ECC out queue status is STOP. We are done the Material Master and Customer Master Data Replication form ECC to CRM successfully. Activated the Equipment related objectives and done the Initial Load we are facing the problem for Equipment.
Please advise me
Thanks in advance.

Hi,
In the SAP Help of Equipment Replication from SAP ECC to SAP CRM following are prerequisites:
Integration
The initial download of data is triggered in SAP CRM and is executed by middleware. Uploads and delta downloads take place automatically when data is changed in SAP CRM and SAP ERP respectively.
To use this function you require the following releases, or higher:
■SAP CRM 7.0 (with active middleware)
■SAP enhancement package 4 for SAP ERP 6.0
You can have a look at the full help link @
http://help.sap.com/saphelp_crm70/helpdata/en/46/cc79505ec61525e10000000a114a6b/frameset.htm
Can you check the Bdoc Messages and mention the Error and the Status of the Queues of the Equipment Adapter Object EQUIPMENT.
Hope this will help.
Thanks,
Samantak.

OdiSqlUnload giving error for network location specified

Hi,
I have been trying to use OdiSqlUnload tool to create text files on Network machine.
But it is giving following error
oracle.odi.oditools.OdiToolInvalidParameterException: Error while setting parameters on tool
at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:607)
So as per error it is saying parameters specified are incorrect.
Let me also paste for you Code i have used.
OdiSqlUnload -FILE= \\10.161.102.182\Interfaces\OMP\BUR\snd\RBSIT_#SAP_Filename.txt -DRIVER=<%=odiRef.getInfo("SRC_JAVA_DRIVER")%> "-URL=<%=odiRef.getInfo("SRC_JAVA_URL")%>" "-USER=<%=odiRef.getInfo("SRC_USER_NAME")%>" "-PASS=<%=odiRef.getInfo("SRC_ENCODED_PASS")%>" "-FILE_FORMAT=FIXED" "-ROW_SEP=\r\n" "-DATE_FORMAT=yyyy/MM/dd HH:mm:ss" "-CHARSET_ENCODING=ISO8859_1" "-XML_CHARSET_ENCODING=ISO-8859-1"
SELECT * FROM ompodi.start_record
As here i have specified network location, does it mean i cannot create files on ntwork machine directly?
If so then is there any way to move files to network machine location from host computer?
Also i would like to know any tool for deleting files , preferably network location.
Thanks and Regards,
Mahesh

IT WAS GIVING ERROR BECAUSE IN SOURCE COMMAND I HAVENT SPECIFIED SOURCE TECNHOLOGY AND LOGICAL SCHEMA.
ALSO IN ABOVE COMMAND THERE IS NO NEED TO WRITE QUERY WORD EXPLICITELY.
SO IT SHOULD BE AS
OdiSqlUnload -FILE=D:\Patrol\kaname2alert.txt -DRIVER=<%=odiRef.getInfo("SRC_JAVA_DRIVER")%> "-URL=<%=odiRef.getInfo("SRC_JAVA_URL")%>" "-USER=<%=odiRef.getInfo("SRC_USER_NAME")%>" "-PASS=<%=odiRef.getInfo("SRC_ENCODED_PASS")%>" "-FILE_FORMAT=FIXED" "-ROW_SEP=\r\n" "-DATE_FORMAT=yyyy/MM/dd HH:mm:ss" "-CHARSET_ENCODING=ISO8859_1" "-XML_CHARSET_ENCODING=ISO-8859-1"
select 'FAILURE ',trim(nvl(substr(substr( PACKAGE_NAME||',', 1, instr(PACKAGE_NAME,',')-1 ),7),'Error Due to missing scenario or Any other unlogged error')) Package_Name,to_char(FAILURE_TIMESTAMP,'DD-mm-yyyy HH24:MI:SS') Execution_Time from <%=odiRef.getSchemaName("OMP","W")%>.ERROR_MESSAGES order by failure_timestamp desc
HOPE IT WOULD HELP SOMEONE.
SO POSTING IT.

Top N query giving error for oracle 8.0.6

Dear All,
We are executing this query SELECT XBLNR, WERKS, MATNR, MDV01, BACKFLQUANT, STATUS, SAPTIMESTAMP, PITSTIMESTAMP, PMTIMESTAMP, BATCH FROM (SELECT XBLNR, WERKS, MATNR, MDV01, BACKFLQUANT, STATUS, SAPTIMESTAMP, PITSTIMESTAMP, PMTIMESTAMP, BATCH FROM PMBPITS.PITS_UNITY WHERE STATUS = '01' ORDER BY PMTIMESTAMP) WHERE ROWNUM < 20
on oracle 8.0.6 but this is giving the following error
ora - 00907 missing right parenthesis error
1. Is it that in the inner select we cannot use order by and where clause together.
2. We also found that if we remove order by from inner select then the query is not giving error
pls help . points will be awarded

Hi,
what ever the Aman said is correct. You check this is supported in 8.1.5, SQL allows you to embed the ORDER BY clause in a subquery and place the ROWNUM condition in the top-level query;
'Top-N query' is a ORACLE 8i feature which is supported in SQL. However,
Bug:855720 states the following:
"PL/SQL does not support top-N queries (ORDER BY in SUBSELECT/SUBQUERY
or VIEW. Since this feature is available in SQL, but not in PL/SQL,
it has been logged as a Bug that will be fixed in 8.1.6."
- Pavan Kumar N

XdbConfiguration.sql giving errors for package XDB_CONFIGURATION

Hi,
I am getting following errors(at the bottom) while running xdbConfiguration.sql before installing the demo.
I am logged in as sys user(sysdba) and using running
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
on Windows2000.
Is the wrong version of Oracle. Do I have have 9.2.4.0.
Thanks in advance for help.
Om Soni
Errors for PACKAGE BODY XDB_CONFIGURATION:
LINE/COL ERROR
51/6 PL/SQL: Statement ignored
51/54 PLS-00302: component 'DELETE_FORCE' must be declared
56/4 PL/SQL: SQL Statement ignored
56/20 PL/SQL: ORA-22970: name does not correspond to an object view

Hi ,
I upgraded to 9.2.0.4.0. The error still shows up while running the xdbConfiguration.sql.
The following errors show up:
Errors for PACKAGE BODY XDB_CONFIGURATION:
LINE/COL ERROR
51/6 PL/SQL: Statement ignored
51/54 PLS-00302: component 'DELETE_FORCE' must be declared
56/4 PL/SQL: SQL Statement ignored
58/9 PL/SQL: ORA-00942: table or view does not exist
I got rid of first two error by removing dbms_xdb.DELETE_FORCE from line
dbms_xdb.deleteResource(targetResource,dbms_xdb.DELETE_FORCE);
Last two error are at line :
select make_ref(DATABASE_SUMMARY,'DATABASE_SUMMARY')
into xmlref
from DATABASE_SUMMARY;
Looking at the script DATABASE_SUMMARY is not a object.
May be the script has a bug in it.
-Om

IDOMServices Parse giving error for non-alpha numeric characters in content

Hi All,
Using Adobe InDesign CS4 SDK 557, I want to create IIDXMLDOMDocument * from a xml stored in a PMString variable.
I used the following code to parse the xml:-
InterfacePtr<IK2ServiceRegistry> servReg(GetExecutionContextSession(), UseDefaultIID());
InterfacePtr<IK2ServiceProvider> provider(servReg->QueryServiceProviderByClassID (kDOMParserService, kDOMParserServiceBoss ));
InterfacePtr<IDOMServices> domService( provider, UseDefaultIID() );
if(!domService)
break;
std::string stdString = myXMLString.GetPlatformString();
const char * buff = stdString.c_str();
InterfacePtr<IPMStream> pmStream(StreamUtil:: CreatePointerStreamRead( (char *)buff, stdString.size()));
IIDXMLDOMDocument * parsedDom = domService->Parse( pmStream );
- Now the problem is when myXMLString have some special character like “0x27” , “0x14” etc. then IDOMServices::Parse fails.
- I tried replacing these characters with “'”, “” but still IDOMServices::Parse fails.
I also tried to used ISAXServices::ParseStream, but it also gives error for the same character.
Also tried setting ISAXParserOptions::SetAbortAfterWarning(kFalse), but not changed in result.
Please let me know if I am missing something.
Thanks,
Jitendra Kumar Singh

Hi Nitika Saini,
Please let me know what's your patch level of BI 7 system.
I am also facing problem with transformations, I didn't see any transper routines in my system for 0IC_C03 - 2LIS_03_BX, LIS_03_BF, 2LIS_03_UM.
Here, my BI 7 patch level BI content 8 and BW pathc 16.
Thanks,
Chandra

Credit card error in bdoc for ecc to crm

I am getting an error R11 144, No credit card details found, when an ECC customer master record has a credit card on it and it is flowing to CRM 7. If you have encountered this error, how did you fix it? I have searched with no success.

I believe I may be getting the R11 144 error after I get a R1 561 because the card doesn't load into crm, so when doing a delete or change to the customer in ECC, the system looks for a card in CRM to delete and there isn't one. So how to get rid of the R1 561 error then? It is not an auth object issue as I have seen in some responses. The card number and card type are not getting loaded into the bdco, but the expiration date is. I have logged a ticket with SAP but just keep going back and forth with them. Hoping someone has been through this before. Thanks.

Bank statement giving error while processing

hi gurus,
while processing the manual bank statement the system gives me an error " g/l account 10 does not exist ". how can sort dis error out. help
best regards
sayeed

thnx for the effort. but i surely dint get what i was looking for. c while i try to execute inside the batch input session it gives me the error
g/l account 10 does not exist
please help me in this regard
best regards
sayeed

Giving error for NearCache Configuration-java.lang.IllegalArgumentException

Hi,
I tried to use near cache topology but it is giving the below error(I am unable to masp the near cache)
java.lang.IllegalArgumentException: Unresolved reference to scheme:
example-local
at com.tangosol.net.DefaultConfigurableCacheFactory.resolveScheme(DefaultConfigurableCacheFactory.java:840)
at com.tangosol.net.DefaultConfigurableCacheFactory.resolveScheme(DefaultConfigurableCacheFactory.java:893)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:130
6)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:294)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:204)
at com.tangosol.coherence.component.application.console.Coherence.doCache(Coherence.CDB:18)
at com.tangosol.coherence.component.application.console.Coherence.processCommand(Coherence.CDB:209)
at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:37)
at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.tangosol.net.CacheFactory.main(CacheFactory.java:827)
I given the below configuration in the cache server side....
<caching-scheme-mapping>
     <cache-mapping>
<cache-name>NearCache</cache-name>
<scheme-name>example-near</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<near-scheme>
     <scheme-name>example-near</scheme-name>
     <front-scheme>
     <local-scheme>
     <scheme-ref>example-local</scheme-ref>
     </local-scheme>
     </front-scheme>
<back-scheme>
     <remote-cache-scheme>
     <scheme-ref>example-remote</scheme-ref>
     </remote-cache-scheme>
</back-scheme>
</near-scheme>
<remote-cache-scheme>
<scheme-name>example-remote</scheme-name>
<service-name>ExtendTcpCacheService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address>localhost</address>
<port>9099</port>
</socket-address>
</remote-addresses>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>30s</request-timeout>
</outgoing-message-handler>
</initiator-config>
</remote-cache-scheme>
</caching-schemes>
PLease provide the configurastion for the nearcache topology....
Thank you.

You are missing the example-local
<local-scheme>
<scheme-ref>example-local</scheme-ref>
</local-scheme>
for example,
<local-scheme>
      <scheme-name>example-local</scheme-name>
      <eviction-policy>HYBRID</eviction-policy>
      <high-units>{back-size-limit 0}</high-units>
      <unit-calculator>BINARY</unit-calculator>
      <expiry-delay>{back-expiry 1h}</expiry-delay>
</local-scheme>Examples can be found in the coherence.jar that contains coherence-cache-config.xml

Exe giving error for report generation and LV 8.6.1

I have created and installed a labview application in a PC(windows XP) where labview is not installed. (already included NI_Excel.lvclass)
I have used a report(excel) generation to display the results.
I am getting following error:
Error Code: -2147352573
Member not found in NI_Excel.lvclass:
I am using MS office Excel 2007 SP1
NI LabVIEW Run-Time Engine:8.6.1.
Report generation toolkit version:1.1.3
phani srikanth
Solved!
Go to Solution.
Attachments:
Error.JPG ‏10 KB

search the ni website and a 30 day eval copy can be found. For use beyond this period you would have to buy a license (unless you have one of course)
compatibility can be found on the following link
http://digital.ni.com/public.nsf/allkb/C9408B9F08D711E786256F3300701D01
hope it helps
TD
Please remember to accept any solutions and give kudos, Thanks
LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7

Weblogic deployment APIs giving error for deployment on weblogic 10.3.2

I am using weblogic deployment APIs to distribute my war file on weblogic 10.3.2 but it gives the following error on distribute
weblogic.management.ManagementException: [Deployer:149003]Unable to access application source information in '<!DOCTYPE HTML PUBLIC "-/W3C/DTD HTML 4.0 Draft/EN">/app/jamagent.war' for application 'jamagent.war'. The specific error is: No application files exist.
My sample code is below.
DeploymentOptions options = null;
Target[] targets = myConnectedManager.getTargets();
Class wlsFactoryClass = Class.forName("weblogic.deploy.api.tools.SessionHelper");
Method m = wlsFactoryClass.getDeclaredMethod("getDeploymentManager",new Class[]{String.class,String.class,String.class,String.class});
m.setAccessible(true);
WebLogicDeploymentManager myConnectedManager = (WebLogicDeploymentManager)m.invoke(wlsFactoryClass, new Object[]{hostname,port,weblogicUsername,weblogicPasswd});
myConnectedManager.enableFileUploads();
options = new DeploymentOptions();
options.setName(destWarName);
ProgressObject po = myConnectedManager.distribute(targets, new File("/tmp/jamagent_orig.war), null,options);
The header of web.xml is
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
Can someone help why this is happening? I am not including weblogic-application.xml in the war file as i think this is not required for a war file. Is that the reason?
Edited by: user790199 on Dec 28, 2009 7:37 AM

Hi,
The DTD used in "web.xml" should not cause any issue ...though it's the OLD "web.xml"...Please try to run the Following command to Generate the New Deployment Descriptors from the Existing Application:
Step1). Open a Command Window and Run "setWLSEnv.sh" or "setWLSEnv.cmd".
Step2). In the Command Prompt move to the Current Directory where you have placed your Application and then Run the Following Command
java weblogic.DDConverter -d NewDDs jamagent.war
Here Above Command Will read the "jamagent.war" War archive and then It will generate the New DDs in "NewDDs" directory...Which we need to replace with the OLD DDs present in our WebApplication..
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Bank Key giving error for ECC to CRM replication

Similar Messages

Maybe you are looking for