Bank Key i not Populating in IDOC type PAYEXT

Hi All,
I'm running program RFFOEDI1, to generate idocs.
The idocs once generated gives all the required info except the bank key, instead i'm getting the SWIFT code
I found a blog that said
If i could populate FIIBKCDE with value 011 instead of 002, bank key would show in that field
Right now its 002 and therefore its pulling the swift code instead of the bank key
Any help on this will be appreciated
Thanks

Hi
I remember such instances and suddenly it appears that there could be a technical error
I suggest to call in the ABAP colleague, check the program, explain the process, test run
I think some substitution is not getting picked some where
reg
suresh

Similar Messages

Issue with Bex report - key Figures not populating correctly.

Hi Experts,
I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
Thanks,
Anamika
Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Restricted key figure not populating data

Hi Guru's,
I am facing problem with restricted keyfigure. I have restricted amount with cal year which is not populating data.
This key figure is having data in provider.
Could you let me know how to overcome this .
Thanks in advance.
Thanks,
Vijay.

Hi,
The quesry is on Multiprovider? or infoset? it matters first..... or directly on cube? check it and apply relevent infoprovider properties for logic check.
Check the global filters are there any infoprovider restrications etc...
And also while checking the datafor the KF in infoprovide " use ALL the restrictions that are in query and impact the data"
also try removing the restiction and look for data...
Hope this helps.'

Converted key figures not populating

Hi Experts,
The query run shows up the converted key figures but the APD is not populating the same, i tried moving the key figures that are not populating in the query around, and it seemed to work in quality, why it is not populating in APD in the production system?

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Segment E1IDBW1 is missing for the inbound idoc type PAYEXT

Hello,
the above segment is missing in the inbound idoc - basic type pexr2002.
I have checked in TC-we30 and its available there.
but still the idoc is getting generated without this segment.
can someone suggest.
thanks
Arun

Hi All,
I have a similar query to that of Penny. We are able to get the standard IDOC to generate with segment E1IDBW1. It contains the standard fields INPWEEMP, INPWTXT1, INPWTXT2. However, we have a requirement to manipulate the standard contents of these fields. We wanted to use user exit EXIT_SAPLIEDP_002 to do this.
I have maintained user exit EXIT_SAPLIEDP_002 but when we enter this on creation of the IDOC the segment E1IDBW1 does not seem to be available in table EDIDD_TABLE for manipulation. Can you advise please if (1) you were able to get E1IDBW1 available to edit in exit EXIT_SAPLIEDP_002 and (2) were you able to manipulate the contents of INPWTXT1, INPWTXT2 etc?
We have done the following steps:
- BTE 2441 is available on our release
- house bank has been setup as an In House Cash Center which allows E1IDBW1 to be generated
- entry has been maintained in table FEDICUS with Message Type = PAYEXT, BasicType = PEXR2002, Extension = Blank, Seg Type = E1IDBW1
- code maintained in ZXF08U04
The system enters ZXF08U04 but E1IDBW1 is not available there for manipulation.
Can you advise what we might be missing please?
Thanks and regards
Mike

Data is not populating in Idoc To File Scenario

Hi Experts,
My scenario is Idoc To File,
I have developed a scenario and triggered the idoc at outbound, when i check in SXMB_MONI the status is processed successfully, and once i check in destination i am not getting the values, simply one file has come with the name which i have specified in Communicatio channel that's it no data in it. Kindly suggest me the possibilities for getting such a problem. I am confused why the data is not getting populated.
Thanks & Regards,
Venkat

Venkat, check ur file receiver communication channel..
a, if it is configured correctly
(runtime workbench->communication channel monitoring)
b, if yes, check your target structure, if it matches the requirements of structure in the receiver comm channel
How it configured ur terget message type?
Peter

Key figs not populating in Multiprovider Query

Folks,
I have created a multiprovider on a Order Header and and Order Items with the following fields -
Order Header - Sales Doc
                         Orde_ date
                         Promotion_Code
Order Items - Sales Doc
                      Order_date
                       Sale_amt
                      Order_cnt
                      Line_Cnt
My Report should display -
      __Order_date__   __Prom_Code__ __Order_Cnt__ __Lin_Cnt__ __Sale_ amt__
Even though I have order date as 1st column in my report (which is common field in both providers), in the report it is displaying as 2 different rows for each Order date.
1st row displaying Promotion_code from Provider 1 and the 2nd row displaying all the Key fig's.
How can I get all fields in one row? please share your thoughts..
Thanks,
KK

Thanks Mansi and Arun for your response, Promotion code infoobject is only available in Header Cube...Is there any alternative way of doing this other than adding this field in Order item and doing look up in header cube?? I do not want to do a look up as it will effect my dataload performance.
Thanks,
KK
Edited by: kumar K on Aug 21, 2009 12:14 PM

Check in vendor master record between Bank Key and Bank Account for Belgium

Hi all, just a request.
In Belgium the first three digits of the Bank Account are always equal to the Bank Key.
Unfortunately SAP does not check if they are different.
Is there a standard check or should I "offer" a custom control?
Thanks a lot !!!

Dear,
I checked right now in SPRO, but no validation with combination of Bank key and Bank account - that to particular first 3 digits not available. Option available is with ABAP Development.
Option 1.
You create Bank key using transaction FI01. Remove authorizations for FI01 from all users [Hope this already exists in your system].
In vendor master, if you enter Bank key - which also selectable with F4 option, if bank key manually entered and PRESS ENTER, one more new screen open to enter Bank data. That means after pressing enter system validating our entries in bank key with database and when not available, populating new window to enter new entries.
Now when ENTER pressed, suggest Development team to display an Error message 'Bank Key XXXXXXX not available'. By this user cannot enter a bank key as their wish.
Once valid bank key selected from selection screen - validate bank account entry first 3 digits of Bank key 3 digits entered. If not matched - Error message.
Option 2.
Simply remove authorizations for XK01, XK02, MK01, MK02, FK01, FK02 from all users and authorize only one user in creation of Vendor master who aware and take care of entries.
Regards,
Syed Hussain.

Bank key during creation of house bank

Hi,
When we create a new house bank via FI12, we need to specify the bank key. The problem here is that the bank key is system generated. Usually for creation of house bank, we will create in development and transport to PROD. However, we have problem where the bank key in development is NOT the same as that in PROD.
Does anyone have this problem?
Thanks & rgds,
Yvonne

Hi Yvonne,
In our systems the bank key is not automatically generated by SAP. We have it setup so that we designate the bank key and since bank key is master data, we are able to create it manually in each of our systems or ALE it over to the systems that require the information. So we do not run into the issue you've described above.
Regards,
-Anya

IDOC Type - TRXSTA01 is missing in 4.6 C

Hi ,
Though TRXSTA01 is supported by SAP . We are not able to find the same in 4.6 C
The following 'basic IDOC type' is not available .
IDOC Type: TRXSTA01
Message Type: TRXSTA
Process code: TRXS
Function Module: BORTE_IDOC_INPUT_TRXSTA.
The IDOC type is basically used for shipment status notification.
It seemes to be release issues .
Any help will be appriciated .
Regards
Samir

Hi Sameer,
Welcome to SDN.
Perhaps you can use this IDoc type and message type instead.
- DELVRY03/DESADV for shipping notification.
- SHPMNT05/SHPADV for shipment message.
For more information, please check this link.
http://help.sap.com/saphelp_erp2005/helpdata/en/25/42a5ca89bf11d288de0000e8214d78/frameset.htm
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

IDOC type issue

Hi,
A custom IDOC Type is created more than 8 Chars and in Outbound processing MASTERIDOCCREATE FM the EDIDC checks for IDOC type Char 8. Will this effect the processing. As I understand EDIDC table does not store the IDOC type. Please help.
Regards,
Tim

Hi Tim
As far as know 8-character restriction applies for versions 4.0 and older.
We have IDOC types whose names are longer than 8 characters.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Transaction document for Idoc type

Hi Experts,
I am seeking little information about below Idoc type from POS to SAP IS Retail,
I would like to know that, what are the transaction documents generated in SAP IS Retail after executing of below inbound idoc type.
For example WPUUMS – It will create billing document for aggregate sales and material document for Goods movement.
Similarly, please help me for below Idoc type.
·         WPUBON
·         WPUTAB
·         WPUBWB
·         WPUFIB
·         WPUKSR

Hi Vanrajsinh,
I'd recommend you to go through the help.sap.com POS Inbound Interface for general information;
POS Interface - Inbound @ help.sap.com
and then crawl through related customizing in SPRO: Sales & Distribution > POS Interface > Inbound where you'll find the document types corresponding to individual IDoc types and IMG documentation per activity is also quite 'explicit'.
Not to leave you only with links, more information below but document types generated depend on the above config;
WPUBON - POS interface: Upload sales docs (receipts) non-aggregated;
Usually creates billing document and article document to post sales and goods issue per receipt, billing type and movement types can be defined in SPRO POS as above > Control Sales per receipt
WPUFIB - POS Interface: Upload Financial Accounting Interface SRS/POS
creates only FI posting (accounting documents) for pre-defined POS financial transactions; SPRO POS as above > Transaction Types for Financial Transactions and Trans.Type Cotrol of Fin.Trans.
WPUKSR - POS Upload Cashier Data
Cashier statistics, I've only used it for statistics (RIS, no transaction documents created)
WPUTAB - POS interface: Upload day-end closing POS / Payment List
Creates billing document to post payment per payment type if not already posted via receipts, SPRO POS as above > Payment List Control
WPUUMS - POS interface: Upload sales data (compressed)
as WPUBON but aggregated sales, SPRO POS as above > Aggregated Sales Control
WPUWBW - POS interface: Upload goods movements
Creates article documents to post goods movements
Note that you usually do not use all IDoc types at the same time as this would lead e.g. to posting a single receipt via multiple flows.
Hope this helps!
Regards,
Tomas

Bank Key for Brazil .

I am working on Upgrade project to ECC 6.0 we have a 8 Digit Bank key (SAY 12340001) . Which is used, Now SAP has created following validation for BANK number for Brazil. That My 5th Digit should not be 0. So it's throwing Error. How Can to handel this?
Validates a Brazilian bank number
The bank number has 3 parts: BBBCAAAA
BBB         = Bank
C           = Code (Branch)
AAAA        = Agencia (1 to 4 digits, no leading zeros!)
This algorithm verifies that the agency number has no leading zeros
(According to this bank key should not have 0 as a fifth digit.)

Dear Darshan,
In transaction OY17 select BR (Brazil) and go to the end of page.
In Further Check there is a field "Bank Data".
Please, check if this field is flaged. I don't think it's necessary in Brazil (Check in Help, F1).
I've checked without any flag and could created as you wish.
BBBCAAAA = 23720410
I hope it helps.
Thanks a lot.
Cássio Moreira
Brazil

Message type is not populating in the Inbound idoc control record

Hi,
I have created an Inbound Idoc function module and have done the necessary Idoc settings. But, while testing in WE19, I observed that control record is not getting populated with message type and it is dumping.
The settings which I have done in WEDI as follows:
1. Created Idoc segments with necessary fields and released
2. Created Idoc type for the segment type
3. Created message type
4. Assigned message type to basic type
5. In the inbound processing settings,
filled the ALE attributes with the Idoc function module name and input value '0'
6. Assigned FM to basic type and message type
7. Created process code and assigned the process code to message type
Please let me know, the reason for the message type not populating in the control record. Useful answers will be surely rewarded.
Best Regards,
Mallika

Hi,
Maintain partner profile (Transaction code WE20) for the message type you defined in WE81 and put your process code in partner profile and check your logical system settings also in transaction SALE.
Thanks
Rahul

Foreign key fields not getting populated in datacontrol palette for EJB app

Hi,
I am quite new to ADF and EJB.I developed a jdeveloper application with JSF and EJB tiers.(I am using jdeveloper 10.1.3.5)
For database the default HR database is used.I created the entities for the EMPLOYEES and DEPARTMENTS table.
I also created a session bean and a data control for the session bean.
I am having a JSF page that receives all the details of a new Employee and insert into database (i.e persistEntity)
But the Employees constructor from the Data control palette is not populating the MANAGERID and DEPARTMENTID fields which are
the foreign key constraints for the EMPLOYEES table and hence while trying to persist the entity
with the auto populated fields an error message is thrown.
If I used ADF BC instead of EJB then i could populate all the fields including MANAGERID and DEPARTMENTID.
Is it possible to have two text fields for Manager and Department in the jsf to insert the Employee details with EJB as the Model?.
If possible how do I bind the values of these fields to the Employees entity object in EJB.
Kindly need your insights on this.
Thanks,
Guna.

Hi,
How are you using MANAGER_ID and DEPARTMENT_ID fields, are they exposed as Long (or some other numeric type), or did you map them on the entity, something like this
@ManyToOne
private Employee manager; // this by default uses the column named MANAGER_ID
@ManyToOne
private Department department; // this by default uses the column named DEPARTMENT_ID
.... If you mapped them (which is the right way), when you create an employee you should set these attributes before persisting the entity, by using employee.setManager(manager) and employee.setDepartment(department). Then, the foreign keys get populated automatically by your persistence provider (Toplink).
If you are using data controls, it is a little different process to set the department and manager, but you should take a look at this tutorial http://www.oracle.com/technology/obe/obe11jdev/ps1/ejb/ejb.html , it will hopefully answer a lot of your questions.
Pedja

Bank Key i not Populating in IDOC type PAYEXT

Similar Messages

Maybe you are looking for