BAPI for getting Equipment and Resources for a WORK CENTER

Hi All,
I have a requirement where i need to get all the equipment list for a given work center. So its Interface should be like
Input -- Work center
Output -- Table filled with Equipment list
               Table filled with Resource(Person) list
Please let me know if i need to provide other additional information also.
Thanks ,
Abhishek

Hello,
I think What you providing input is right.Just would like know how will you get Person Responsible out put list??
Please Use The table ITOB to fetch the Equipment List according to Work Center as Input.
OBJID=Put work center ID in CRHD Table you will get the OBJID then you have use the OBJID in table ITOB for  getting the equipment data.
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Oct 1, 2010 9:13 AM
Edited by: RAKESH ASHOK MANE on Oct 1, 2010 1:20 PM

Similar Messages

  • What to do for Streaming??? : 'axis interface pragma' vs 'pragma for ap_fifo interface and RESOURCE for AXIS'

    Hi all,
    I need streaming interface with accelerator. I followed one tutorial. There I mentioned through pragma that ap_fifo interface will be used along with AXIS RESOURCE. But now I found that there is one option for axis interface in pragma. I want to know what is the difference between this two procedure. It is very confusing. Can I blindly change "ap_fifo interface + AXIS RESOURCE" to "axis interface"??? Or there is some differences?? Which one is hardware optimized.??????

    Depends on the HLS version. In the current tool version, if you are interested in setting up an AXIS interface then the directive to be used in axis.
    void example(int A[50], int B[50]) {
    //Set the HLS native interface types
    #pragma HLS INTERFACE axis port=A
    #pragma HLS INTERFACE axis port=B
    If you are using hls::stream<> then by default the top level interface is implemented as ap_fifo interface. ap_fifo will not support bi-directional access.

  • BAPI to get all user lists for input object,authorizations, and profiles

    Hi Experts,
    BAPI to get all user lists for input specific object, authorizations, profiles and values?
    Any useful answer will be rewarded with suitable points.
    Thanks,
    Rohan

    Hi
    use the fun module/Bapi's
    BAPI_USER_GET_DETAIL
    BAPI_USER_LOCPROFILES_ASSIGN
    BAPI_USER_LOCPROFILES_DELETE
    BAPI_USER_LOCPROFILES_READ
    BAPI_USER_PROFILES_ASSIGN
    BAPI_USER_PROFILES_DELETE
    SUSR_BAPI_USER_PROFILES_ASSIGN
    SUSR_BAPI_USER_PROFILES_DELETE
    also you can use the tables UST12 for user based authorizations
    AGR_USERS   -roles assignment for users
    AGR_PROF  - Profile data for roles
    AGR_DEFINE - Auth Profiles for users
    See the AGR_* and US* tables further
    Reward points if useful
    Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

  • We just got 2 iPad air today and Set up both with the same Apple ID, now I'm getting messages and FaceTime for my 13 yr old daughter.  Do I have to create a different Apple ID for her?

    We just got 2 iPad air today and Set up both with the same Apple ID, now I'm getting FaceTime and messages for my 12 yr. old.  Do I have to set up a separate Apple ID  for her to avoid this?

    It's a trust issue. You can set them up so you don't receive each other's messages as long as you each have your own email address.
    The trust issue is the fact that either of you can change the separation at any time via Settings by checking the appropriate (inappropriate?) email address.
    To be absolutely sure you can never receive each other's messages will require two Apple IDs.

  • HT201304 I purchased a photo shop product called camera forge for $5.49 and is doesn't work. How do I get a refund? Thanks Fiona

    I purchased a photo shop product called camera forge for $5.49 and is doesn't work. How do I get a refund? Thanks Fiona

    Take it up with the app developer first. If they won't respond then you can take it up with iTunes support.
    http://www.apple.com/support/itunes/contact/

  • BAPI to get cost line items for Cost Centers

    Hi,
    does anybody know a BAPI to get
    cost line items for Cost Centers
    or other Cost Center data?
    e.g. actual, plan, commitments
    I'm thankful for help.

    hi,
    check this BAPI <b>BAPI_COSTCENTER_GETDETAIL1</b>
    regards
    vijay

  • Didn't Apple say that those who bought a new iDevice after October 1, 2013 could also get iWork and iLife for free on Mac?

    I thought I read that anyone who bought a new iDevice on or after Oct. 1, 2014 could get the iLife and iWork apps for free on their iDevice and the same Mac applications would be free for any Mac with the same iCloud account.  I purchased an iPad Air in January and got those apps for free on it, but when I bought a used Mac locally I can't get any of those apps for free?  If it is possible to get those iLife and iWork apps on my Mac that way please tell me.

    Didn't Apple say that those who bought a new iDevice after October 1, 2013 could also get iWork and iLife for free on Mac?
    No, they said if you bought a new iOS device on or after September 1, 2013, the iOS versions would be free. And if you purchased a new Mac on or after October 1, 2013, the Mac OS versions would be free. The Mac & iOS iWork & iLife apps are separate applications for two different operating systems. Unless you purchased a new Mac after October 1, 2013, you will have to purchase them for your used Mac.

  • Failed to start message bus: Could not get UID and GID for username "d

    Today ive updated my system and got this mesage on boot
    Failed to start message bus: Could not get UID and GID for username "dbus"
    My keyboard doesnt work..not on usb or ps2.
    After 2 years over using arch on stable repo i got this very ugly bug...S***
    ill use minimal cd to reinstall core...it seems i cant get on tty working

    phoenix, don't post in old threads: http://wiki.archlinux.org/index.php/For … Bumping.27
    Try reinstalling dbus-core - if that doesn't work, start a new thread.
    Closed.

  • I would like to do the 10 dollar a month download for photoshop but i already have purchased Lightroom,  can i get photoshop and muse for that price?

    I would like to do the 10 dollar a month download for photoshop but i already have purchased Lightroom,  can i get photoshop and muse for that price?

    Change Account https://forums.adobe.com/thread/1465499 may help

  • Function Module for Get Price  and Bonus in Sales Order

    Hi.. ABAP Guru's..
    I wanna make a function for get price and get Bonus for all material items in sales order.
    Help me for solving it.. Please.
    Thanks a lot before and after.
    Rgds,
    Asep Saepudin

    Hi,
       Welcome to SDN.
    Refer
    https://forums.sdn.sap.com/click.jspa?searchID=7085162&messageID=782207
    https://forums.sdn.sap.com/click.jspa?searchID=7085162&messageID=950526
    Regards

  • DBUS doesn't start - Could not get UID and GID for username

    Hi.
    Today i installed Archlinux in other of my systems, but i have a problem. I installed the last dbus (dbus 1.4.16-1) and i putted it in my rc.conf:
    DAEMONS=(syslog-ng @network crond dbus alsa)
    but it doesn't start.
    The error is:
    Thu Apr 5 23:03:36 2012: :: Starting D-BUS system messagebus [BUSY] Failed to start message bus: Could not get UID and GID for username "dbus"
    Thu Apr 5 23:03:36 2012: [FAIL]
    So, i don't know what happen. In my other systems, i don't have any problem, only with this fresh install.
    Googling i found this solution from Chakra's wiki:
    Could not get UID and GID
    If you get the following error while starting DBUS:
    Failed to start message bus: Could not get UID and GID for username "dbus"
    then add the user like so:
    # groupadd -g 81 dbus
    # useradd -c 'System message bus' -u 81 -g dbus -d '/' -s /bin/false dbus
    If i do this, can i funk my system?
    Edit:
    That solution works well. I don't kown if in the future maybe i'll have some problem.
    Should i mark this post like "Solved"? Still i don't know what was the real problem.
    Last edited by superchango (2012-04-06 14:08:34)

    i'm out today and as i haven't completed setup yet i can't upload log to phone to post it all. 
    the problem wasn't spotted until trying to set up NetworkManager and lightdm.
    useradd and groupadd owned by shadow (4.1.5-4), it wasn't installed before dbus-core and avahi needed them though. not sure how install environment works, does it rely on installed version or installer versions?
    installed filesystem (2012.2-4) //FIRST LINE OF FILE
    /tmp/alpm_INcwzu/.INSTALL: line 2: usr/sbin/groupadd: No such file or directory
    /tmp/alpm_INcwzu/.INSTALL: line 3: usr/sbin/useradd: No such file or directory
    installed dbus-core (1.4.16-1)
    installed xcb-proto (1.7.1-1)
    installed xproto (7.0.23-1)
    installed libxdmcp (1.1.1-1)
    installed libxau (1.0.7-1)
    installed libxcb (1.8.1-1)
    installed kbproto (1.0.6-1)
    installed libx11 (1.4.99.901-1)
    installed dbus (1.4.16-1)
    /tmp/alpm_ETrJQT/.INSTALL: line 2: usr/sbin/groupadd: No such file or directory
    /tmp/alpm_ETrJQT/.INSTALL: line 3: usr/sbin/useradd: No such file or directory
    // INFO ON ADDING AVAHI TO RC.CONF
    installed avahi (0.6.31-1)
    // LOTS OF SUCCESSFUL PACKAGES
    installed shadow (4.1.5-4)
    // MORE SUCESS
    installed mkinitcpio (0.8.6-2)
    >>> Updating module dependencies
    ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    bsdcpio: Failed to set default locale
    // REPEAT FOR FALLBACK, SAME ERROR
    After that it's fine.

  • Dunning form F150- Telefon/fax/mail printing for 1 user and not for other

    Hello expert,
    This is regarding the printing of the dunning form using F150. 
    At first, using company code and account clerk (BUSAB), we retrieve the user id.  The program uses FM BAPI_USER_GET_DETAIL to get the address details of this user id.  The user name, telephone and fax adn email are printed in the dunning form (1st reminder, 2nd reminder and so on).  The problem here is , the address details are printed on the form for one user and not for the other user who is processing.  Any idea regarding this.  Do I need to give any user setting parameter in SU01 or is there any authoriztaion issue which is blocking this.  Awaiting reply,
    Cheers,
    Bala

    I'm having the same problem with Exchange 2003, I can get it to work with Entourage and on my iPhone, but it keeps rejecting my password on Mail.app. If I keep entering the password it starts to update with server, but it won't save the password. IMAP is on for my account which is how it works on iPhone.
    I'm starting to think it has something to do with Keychain Access or Mail.app and not so much Exchange Server. If anyone has found a solution please let me know,
    Thanks

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • Why are some of the new app free for some ppl and paid for some

    why are some of the new app free for some ppl and paid for some?

    People that purchase the iPhone 5s, and the 5c get Pages, Keynote, and Numbers for iOS for free.  Also, any purchases of the new iPad models.
    More info here: http://support.apple.com/kb/HT5913
    HTH

  • What are the best books for PL/SQL and Forms for BEGINNERS?

    I asked about learning Oracle Forms in an earlier thread. Some suggested Oracle training at official Oracle Training centers like Koenig. I just went to the Koenig site. The OCA & OCP Forms Developer Training Boot Camp is a whopping 2,610 USD. That’s like 1/4 Million LKR. It’s more that the yearly salary of both the 2 new developers we got and want to train. That’s out of the question.
    Some have suggested shadowing experiences programmers and team coding. Both options are out, since those things don't work here.
    Learning from sites such as Francois Degrelle's blog is no good for new people since they will get confused.
    I have come to the conclusion that the only way to do is to buy 2 books, one for PL/SQL and another for Oracle Forms, give it to them and ask them to follow the book and learn it and also give a time period like 2 or 3 months.
    What are the good books out there for BEGINNERS to learn PL/SQL and Forms?
    Edited by: Channa on Aug 8, 2010 10:08 PM
    Edited by: Channa on Aug 8, 2010 10:12 PM

    In addition to the books the chapter Application Developer's Guide - Fundamentals in the documentation is also worth giving a shot:
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14251/toc.htm
    Just for the record: I believe leaving them alone with the books won't do it. I'd at least define objectives (e.g. $chapters of the books in a week) and after they achieved them I'd test their knowledge of the individual objectives (like it was back in school :p ). By that you have control over how they are proceeding, you can focus on the things they didn't understand and you are able to eradicate some bad habits they might adopt during their studies.
    If you don't take your time to train them proper you won't get good developers anyway and you will loose much more time and money...
    cheers

Maybe you are looking for