BAPI_TRLSRVAPS_SAVEMULTI updates in DEV but QAS

Report for the bdc uploading file after execution it successfully updates data in development but not up in quality the bapi used for this updation is BAPI_TRLSRVAPS_SAVEMULTI?the it_tab contains all updated data but not display in quality ,what to do as it run correctly in GND?
Edited by: Julius Bussche on Jan 5, 2009 1:30 PM
Meaningfull subject title added.

Hi,
Please check the file that you are using to upload data in quality server.
Also check the authorizations required to upload data into the table, check the 'delivery and maintenance' of the table.
Regards,
Prosenjit.

Similar Messages

Custom bsp Iviews work in dev but not in qas?

Hi All,
We're using R/3 4.7, ESS 50.4, MSS 60.1.20.
We have developed a number of custom bsp iviews that work perfectly fine in dev but when we transported to qas, no data is displayed. The labels in the bsp are being displayed so we know that the bsp is working.
We use epcf to listen for the employee number in the bsp's. It is configured the same in both dev and qas but in qas the bsp is not picking up the employee number and therefore is displaying no data. When you click on susbequest employees in the team viewer, nothing happens (bsp should reload).
The only difference is that the portal dev and the bsp's reside on the same server but when we go to portal qas, it is now on a different server to the bsp. We have relaxed the domain, so that the server name has been removed from the domain name but still to no avail.
If anyone can help at all, i'd really appreciate it, as i'm at a loss as to what to do next.
Many thanks,
Liz.

Hi,
Seems that there is:
1. something wrong with the System Object or it's definition..
OR
2. someone used a server/hostname as a "constant" instead of a "variable"
OR
3. the Portal and Backend are not in the same domain or the configuration is not with Fully Qualified Domain Name
Hope this helps you to narrow it down or even find the issue.
Good Luck,
Benjamin Houttuin

Transport Questions and Questionnaires from Dev to QAS or to PRD

Question
How do we transport questions and questionnaires from dev to QAS or to PRD. Do you type all them again or there is process no. What is best process others do
Answer
As you must be aware, Questionnaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
At least Iu2019m not aware of any other way to move the Questionnaire details across clients.
I know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment
Any body has soloution ?
Thanks.
Saquib
http://aspirehr.com/HCM_solutions/hcm_solutions.asp

Hi Vishal,
As you must be aware, Questionaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
Atleast i'm not aware of any other way to move the Questionnnaire details across clients.
i know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment.
So if you are a part of the Implementation Consulting team, it is your responsibility to train the core team in doing the activity in live environment. Hope this information helps.
Best regards
G Raj

Transporting an ABAP query from DEV to QAS/PRD

Hi all,
I am trying to modify an existing query in DEV and move it to QAS and then to PRD. After making the changes in DEV, there was new transport request created, in which I had the changes for the query and in se93, i changed the name of the prog to the newly generated prog. after moving the transport to QAS, it is giving me a dump saying that the new prog generated in dev does not exist in QAS and hence the tcode does not work.
after that i tried with the standard SAP report "rsaqr3tr" and tried to make another transport assuming that the program would be together with the transaction and will be transported together. But this does not work.
I need help regarding this please - since it is an urgent rek - how do i transport the query after making changes to the already existing one - from DEV to QAS or PRD?
Please explain in detail where and what I am missing.
Thanks!
Related answers are appreciated and rewarded.

Hi Shyam.
I would like to suggest a few references,
[SDN - References for Query related to transport request|Query Related to Transport Request;
[SDN - Reference for Transport Management System (TMS)|Transport Management System (TMS) of R/3;
[SDN - Reference for Transport Request Problem|Transport reruest problem............;
[SDN - Reference for Transport request Query|Query Transport;
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

I am trying to update my iPod but I can't until I sync it. However when i try to sync it a message pops up and says "Blythes iPod" can not be synced because a session can not be started with this device. What do I do? Help!

I am trying to update my iPod but I can't until I sync it. However when i try to sync it a message pops up and says "Blythes iPod" can not be synced because a session can not be started with this device. What do I do? Help!

https://support.apple.com/kb/TS1567
Ah, it has been mentioned daily esp since iOS 5 / iTunes 10.5 but has always been there as an issue.
Order of attempts:
Repair the installers
Uninstall EVERY Apple component (auto and manual)
Services: Restart all 3 Apple items (AMS, Bonjour, iPod)
I* always do the last almost, then launch iTunes, and only then connect iPod.
IF you see a yellow alert in Devices and Printers or in Device Manager, then I could find NO WAY to fix or repair other than a clean OS. Something messed up the device driver support.
If/when Windows asks "what to do when it detects iPod"? don't chose any default action, to me, based on hunch and 3 PCs, that seems to mess AMS up for some reason.
Tried with Windows 7 64-bit Pro and Home Premium, and also Deve Preview 8 (which other than the inability to update iOS to 5.0 seems to run better -- except when it comes to AMS thing! so seems Apple is not on the same page writitng drivers.

Special Characters issue in DEV and QAS

Hi,
I am uploading a file that has special characters (Japanese).
In the DEV system the special character is converted to #. Which the business wants.
In QAS system the special character is not converted and is as it is, which makes the business users difficult to find out if any speical characters are there and they don't want the special character as it is
The file consists millions of record with a possibility of four or five records with special characters
The special characters on keyboards is not an issue.
The programs in DEV and QAS system are same and the file tested is also the same but different results.
Tried in Tcode SNLS to find something but didn't know what and where to look into.
What could be the issue in this? Looks like this is Basis issue but would like to know if anyone can let me know.......
Regards
Sandeep

Hi ,
i want to check ur open dataset statement in the program which is being used here if at all in ur case.
Can you please check the relavant code page in both the D and Q systems and search with the appropriate hexa decimal values(for the special characters ) in both the systems ..
u can use code page by tcode scp ..
ex -> as u say a special char sp1 is having entry in q and code page which is being used (like 4200 )
is not having in d03 .
then if in d03 this page has no entry then it shows as # , since it is showing in q then it has an entry over there. this is my guess..
so if at all the client wants not to see this special char's , u need to remove them from this code page.. and check ..
Cant say if this can solve but u can take this as one more way of dealing with code pages and special chars....
br vijay..

Transporting a role from DEV to QAS in a Workflow

Hi,
I assigned a Role as the possible agent for a std task in DEV. I transported from DEV to QAS, first the Role (where I see the Std. task to which it is assigned and the corresponding WF template in PFCG for the role) with a Customizing Req. and then transported the WFlow template & associated std.task with a WBench TReq.
The transport is successful without any errors.
But, when I see the agent assignment for the task in QAS, the role is gone. Also, When I see the role Maintenance PFCG for this role, I don't see any WFlow tasks in the Workflow tab.
I tried to trasport this sequence(first role and then the wflow & std. task associated with it) twice, but in vain.
Can somebody pl tell me what's going on with the transport of the roles(that should include the wflow tasks & templates).
Thanks in advance
venu

Mike,
Infact I did first time transport in the sequence of WB req and then Cust. Req. It didn't help and then I tried the other sequence too.
And Could you tell me how to look into the WF configuration of the system to see if it is set to transport the Roles?
Actually, i tried transporting 3 roles under one Cust. Tran.Req, but only one Role got transported correctly and the rest two have been failing.
Pl. tell me if I am doing it correctly...
thank you
venu

Problem while transporting Screen exit object from DEV to QAS client

Hello All,
I have developed screen exit for tcode 'ME51N' to add customer field in newly added TAB. To grayout that field in display mode, I have added code on the PBO event of that screen. Code for PBO even has been written inside the include. Exit is working fine on development client.
After transporting the exit on QAS client the field graying out functionality in diplay mode is not working eventhough the include which contains the code for PBO even is exist on QAS. Also in flow logic if i double clock on the PBO module event, it says object does not exist, eventhough the include which contains the PBO event code exist in QAS.
Please, help me to understand why the linkage between flow logic PBO event and the include where the PBO code has been written is not getting transported from DEV to QAS.

Hi,
First check the TR log if there is any errors. If no errors, then check if all the objects were properly transported or not.
You might have missed out in transporting the enhancement activation(CMOD).
Try to Rebuild the object list for updating the navigation index. You can do this from SE80=>Rightclick on function group=>More functions=>Rebuild object list.
Thanks,
Vinod.

I have transport Infoset and Query from DEV to QAS

Dear Expert,
I have created an Infoset and Query. My Infoset and My Query have been copied to Query Global Areas and have been transport to QAS server. (I have created Request Transport, the number request is generated by system in DEV)
But when I look with tcode SQ01 and SQ02 in QAS, there are none of my infoset or query appeared.
Please, what should I do?
Best regards,
Dedy.W

Check wether yr request transported correctly since these type of requests generally locked..
After removing lock only we can transport these..
Check in quality..
Tcode.. STMS
Check here for yr request wether transported or not..

What is CTS ? what is the role of CTS in between DEV and QAS?

Dear
What is CTS ? what is the role of CTS in between DEV and QAS?
Thanx & Regards
Mohamamd Nabi
[email protected]

hello, friend.
actually, you can search for subjects like this in the threads archive. you will be pleasantly surprised to find that there are already many threads with similar issues and that you can find answers to even more otherwise unrealized questions. and you don't have to wait for anyone to reply.
it looks like the issue is urgent for you, and this is why i am attaching this feed from Sadhu Kishore, which was posted some time ago... (if he replies to your thread, you may choose to award him points).
"Hi,
The transport workflow provides a framework for transporting enhancements or new developments of existing business functions in a system landscape. It provides a direct connection between development and transport administration. The transport workflow manages the transport process, determines the user for each individual step automatically, and then displays an interface which they can use to perform the task directly.
It is an efficient method of transporting a selected number of requests into a group of transport targets, and uses clearly defined approval steps to ensure the quality of your target systems. The requests can be transportable change requests, Customizing requests, relocation transports or transports of copies. The transport targets do not need to be located on defined transport routes. However, the transport workflow can involve some risks, caused by the dependencies between transport requests:
Import sequence
It is important that you import requests in the correct order, so that development work is up-to-date in the target system.
Incompleteness
It is important that the functions transported in the transport proposal are complete; otherwise errors may occur in the import system.
A request is not imported, but it contains an important data element. You use another request to transport a table that references this data element. Since the referenced data element does not exist in the target system, activation errors will occur when you import the second request.
The transport workflow is a generic workflow. Its ability to process the transport route configuration in TMS enables it to adapt itself to any system landscape. This means you can transport multiple requests into multiple targets, even if these targets are not located on the transport routes.
This reduces the amount of work for the transport administrator significantly. The automated nature of the workflow also reduces the likelihood of errors during transports.
You can use the transport workflow in two different ways.
Transport workflow as a transport strategy
If you have production systems in your landscape that can only accept approved transports, we recommend that you use the transport workflow to organize and coordinate the transport process.
To do this, set Workflow-controlled transports as your transport strategy and configure the transport workflow.
When you release a transport request, the transport workflow starts automatically and the screen Create Transport Proposal appears. The requests are then released implicitly when the transport proposal is sent to the transport administrator.
Special transport workflow (mass transports)
You can use the special transport workflow to make transports that do not follow the defined transport routes or that take place outside the normal transport schedule (part of the mass transport strategy). These transports may be corrections made in the development system that have to be transported into the production system without delay.
To use the special transport workflow, set Mass transports as your transport strategy and configure the transport workflow."
thanks. you have been most generous.
regards.

Inconsistencies between DEV and QAS query output

Hi all -
I am currently using a BI query in my VC model that I send the output to a table in VC, note that I am showing only a few fields from the output. This works for some tables in my model that use another query.
The problem is that when I change the alias (using the Alias Manager tool) from BI DEV to QAS, then deploy, the number of columns is changing in my table and seems to give me all of the potential query output and not only the fields I have selected in my model.
To make a test, I have tried to hide the output fields in the BI query itself, and this seems to have a direct effect on the shown columns in VC but creates some other unwanted problem. In fact, it works for the other query...
Anyone had the same problem? could that be a refreshing problem?
Thank you,
Claude.

Hi
It could be a refresh problem. Try to change the RFC from the query definition & refrech the 'Data service'. Then test the output of the query from 'Test Query' then save & deploy. Also in Columns try with the charachters where type is 'Text'.
Regards
Sandeep

Sort Dumps All Over in DEV and QAS While Applying Patches - Help Pls

Applying about 80 patches on DEV and QAS over the weekend with the "Minimize Downtime" option. I got failure at the "TEST_IMPORT" phase and tried to backout and ignore the error but now I keep getting short dumps for any tcode that I use. I can't get past short dumps.
Here is a sample of short dump that I got when I try to execute SPAM and reapply just one patch. I does not load the patch, it just generates a short dump. I opened an OSS note with SAP and they refused to consider that as high priority. Since my DEV and QAS systems are down, the developers will not have any system to work on today and there will be a lot pressure on me today. Please help.
Short Dump text below
The following syntax error occurred in the program SAPLKKBL :
"The field "GFLG_NESTED_PRINT_ON" is unknown, but there is a field with"
Error in ABAP application program.
The current ABAP program "CL_GUI_ALV_GRID===============CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLKKBL ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion

Hi
Please check the following link, it may help you:
Re: Can not lanche workflow with event
Can you give me some more details like whether the patch application is complete or its hung in between? Did u tried to restart the patch application? Can you tell me what error you got while patch application in import_proper phase?
Regards
Sumit

Role difference in DEV and QAS?

Hi
I made some changes to role in DEV and moved to QAS.
Whatever changes I made in DEV, are reflecting in QAS, But SUIM comaprision of roles, it's showing 3 objects are existing in DEV, but not there in QAS.
I opened the role in DEV, tried to find these objects.
Actually these 3 objects not at all existing in DEV also.
Then why in SUIM comaprison it's showing these 3 objects existing in DEV, not QAS.
Cheers
Sreenivasu Balaka

Hi Sreenivasu,
maybe the cause is the same as you have mentioned in Profile not generated in QAS even though same as DEV? ....
Try first to generate both profiles in DEV and QAS. run the compare then again....
Still some differences?
b.rgds, Bernhard

Installing Mobile Repository Server DEV and QAS on same server

Hi,
i installed CRM Server 7.0 SR1 ABAP DEV and QAS on one server. Afterwards i installed the Communication Station DEV and QAS together on one server.
Now i want to install the Mobile Repository Server (MRS) for DEV and QAS on one server. For DEV i have installed it successfully. But i don't know how to install it for QAS on the same server.
The only answer i found is: Re: CRM Mobile installation
Here is written that one of the repository database ARS_DB needs to be renamed.
But my first question is:
Do i have to install the MS SQL Server 2005 again for the QAS system? Only a default instance is supported and not a named instance. Can i install a default instance twice?
What are the steps for installing the second MRS? Does anybody did it successfully?
It would be very nice if someone could help me.
I use SAP CRM Mobile 7.0 SP04 on Windows 2003 with MS SQL Server 2005 SP2.
Kind regards
Wolfgang

Hello
MRS requires SQL Server 2005. It is not possible to \have two MAR repositories with two default instances in a single machine.
Installation might not allow you or throw an error if you have more han one sql server defualt instance.
Instead, you can stll follow the either of the following approaches:
1. Use DEV MAR repositroy itself as a TST repository. It means, you will have one MAR for both DEV and TEST.You have to be cautious.
2. * First install the DEV MAR in one machine.
Configure DEV MAR to DEV CRM for transports.
Restore the TEST MAR DB in DEV MAR machine.
Also configure TEST MAR to TEST CRM server for Transports.
Approach 2 avoids the second time installation. You should have the TEST MAR repository to restore. this option woudl work:)
Best Regards
Shankar

Query performed well in dev but hanging on prod

Hi DBAs,
Urgent help is required on this issue.
One of my sql query performed well in dev server, but now for 1 week it is hanging in prod server so,
* How can i proceed to troubleshoot the problem.
* What are areas i need to look for , and for what ?
Regards
Asif

Are they both the same version of databases?
How recent is your dev data (if possible update your dev from prod)?
If prod to dev copy is not possible
....AND stats for both db are up-to-date
....AND big differnce in db size for dev & prod
....=> You can copy prod's stats and import to dev then run your query on dev to localise the issue then you can start tuning the query on dev.

BAPI_TRLSRVAPS_SAVEMULTI updates in DEV but QAS

Similar Messages

Maybe you are looking for