Barcode is not getting printed in Sapscript

Hi,
I want to print the PO as barcode in my Script. I have converted the output to PDF format
I have created a character format for this and given C128A as Barcode and used this character format to print the barcode. but the barcode is not geettting printed in the PDF output. the PO is blank.
Did i miss anything in the process?
Please let me know the exact procedure for printing the Barcodes.
thanks
Rakesh

hi,
There're differents solutions for the creation and print BARCODEs . All of them have the same problem : When you create a spool from a form/smartform with Barcodes, it's not possible to convert the spool to a PDF file because the BARCODE is created at the time of printing.
just try printing one copy and see.
ags

Similar Messages

  • Barcode is not getting printed in the SmartForm

    Hi All,
    I am trying to print BARCODE in a SMARTFORM but it is not getting printed.
    I have created a barcode ZTest_Barcode from the transaction SE73. Then I have created a Character Format C1 with this barcode ZTest_Barcode.
    In the SmartForm I have applied this character format like this <C1>&WA_VBAK-VBELN&</C1>.
    But in the preview of this SmartForm barcode is not getting printed while this field is printing like <C1>220<C1>.
    I have also tried with some SAP barcodes like BC_CD39, C128A_01, etc. But the result is same.
    Please help me to resolve this issue.
    Regards,
    Avaneet

    hi avaneet,
    check this site for barcode.
    http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
    it may help you.
    thanks
    Sachin

  • Barcode C128 is not getting displayed in Sapscript

    HI,
    I need to print the barcode in the Sapscript.
    The barcode is not getting displayed even in the preview also, when I give the Barcode C128.
    But when I give other Barcodes, it is getting displayed in the preview.
    Can anyone let me know the solution to print the barcode for C128, as others are not that much fit to print.
    Thanks
    Rakesh

    Hi Dieter,
    No. I haven't.
    Is this the reason for that?
    let me know the procedure.
    thanks
    Rakesh

  • Barcode not getting printed from web dynpro

    Hi,
    We have a smnart form with bar code. When we test it from GUI, it is diplaying the bar code and also printing the bar code successfully.
    However when we show the same smart form in webd ynpro as PDF,  Bar code is getting displayed but when we print the form, bar code is not getting printed.
    Are there some settings for this?
    Regards,
    Madhu

    https://discussions.apple.com/message/23759716?ac_cid=tw123456#23759716

  • Barcodes are not getting Displayed in Smartforms.

    HI
    In Previous Month barcode was getting displayed in smartforms  print Preview. And PDF form is generated successfully. I am not using standard form this is custom.
    In Previous month, Service pack SAPKA70023 ABA Support Package 23 & 22 for 7.00 were applied, After that Barcode is not getting displayed for current month. I identified that Barcode Name is not mentioned in smartstyles.
    Ther is no transport Request Moved from last one year.
    Can any one suggest me there will be any impact on barcodes after service packs
    Thanks
    Ravi

    Hello,
    have created some new users and done with the leave request, it comes to backend inbox, but not
    visible in portal. Re-configured UWL, but still the task not coming( leave request). For other users it is > coming?
    Where have you created these users? Many times it is not enough to create new users in a backend system. You will have to create them in the data source which is used by the UME of your portal or to map this data source with the system where you have created your new users
    You can see what data source your portal is using by going to
    Portal --> System Administration --> System Configuration --> UME Configuration --> Data Source
    If this Data Source doesn´t contain your new users, then UWL wouldn´t be able to show their items.
    Here you can check if your user is contained in the data source:
    Portal --> User Administration --> choose the right data source --> put in the username --> search
    Please check if your users are correctly created.
    Regards,
    Iris

  • Text overflown is not getting printed in the next page in ADOBE

    Hi Experts,
    I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
    I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
    Please help me regarding this.
    Thanks & Regards,
    Karthik MD

    Hi Lohitha,
    Even "Expand to fit" is been enabled.
    Thanks & Regards,
    Karthik MD

  • Text overflown in the first page is not getting printed in the next page

    Hi Experts,
    I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
    I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
    Please help me regarding this.
    Thanks & Regards,
    Karthik MD

    Hi,
    This issue is in ADOBE, I think there is no concept of Window in ADOBE,
    The text box is placed inside a Subform.

  • APEX4.0.2 - Interactive Report total is not getting printed when downloaded

    I've an Interactive Report based on a sql in Apex 4.0.2. There is a Balance column whose total sum is displayed at the bottom of the table.
    When I download the report, the total sum of balance column is not getting printed in the bottom of the report.
    Could this be a bug or have I missed some setting?
    Thank you for the help.

    Hi,
    Whilst you can update the SQL to include totals, these would probably not be effective if the user filters the data (the total row may be filtered out) or sorts columns (as the total row would likely be sorted as normal data).
    Unless someone else has any other ideas on this, this may be something that needs to be logged with the Apex team as an enhancement request - create a new thread and start the Subject as "Enhancement Request:"
    Andy

  • Invoice is not getting printed for particular 3 customers

    Hi,
    When user is printing the Invoices, only for specific 3 customers it is it not getting printed automatically, but the output is shows success with green. When they re process it manually, it is printing successfully for the same printer.
    1. Printer setup is checked it is correct
    2. There are two outputs one is External send (E-mail) and one is Printout.
    3. The problem is with only the Printout, where as the external send (E-mail) is sent successfully.
    Help me out in this issue...
    Thanks
    BP

    Hi
    First of all Welcome to SCN Forum
    Please check wheather any subroutine has been assigned to the output type access sequence.If the problem is with printout only then check the Logical destination that has been maintained in VV32 for those 3 customers.In VV32 for those 3 customers check wheather Release Immediately has been checked or not. Before reprocessing it go to VF02 and check on determine analysis
    Regards
    Srinath

  • Vendor Address not getting printed properly in cheque printing.

    Hi
    While printing the vendor address for the cheque printing, for certain vendors the street no. is not getting printed & for certain vendors PO Box is not getting printed.
    In the program we are fetching vendor address from REGUH table & then passing onto the global variables which are being used in the script & data is there in the database table for both street & PO Box number.
    The code in the script is as follows:
    /:           ADDRESS PARAGRAPH UH TYPE '3'
    /:             TITLE    &W_ANRED&
    /:             NAME     &W_ZNAME1&,&W_ZNAME2&,&W_ZNAME3&,&W_ZNAME4&
    /:             STREET   &W_ZSTRA&
    /:             POBOX    &W_ZPFAC& CODE &W_ZPST2& CITY &W_ZPFOR&
    /:             POSTCODE &W_ZPSTL&
    /:             CITY     &W_ZORT1(28)&
    /:             COUNTRY  &W_ZLAND&
    /:             FROMCOUNTRY &W_LAND1&
    /:             ADDRESSNUMBER &W_ZADNR&
    /:           ENDADDRESS       
    Can anyone please let me know, what could be the possible reason for this?

    you can tyr with TYPE '1' or TYPE '2'
    : ADDRESS PARAGRAPH UH TYPE '3'

  • Not getting print out of PO

    Dear all,
                 I am not getting print out of PO. In the message out put, the config ( NACE , MN04 ) and as well as all setting are correct. in FURTHER DATA tab, the despatch option id 4 : Send immediately ( when saving the application) ; but it is not generating any spool request for print out. i have checked in SP01 and SP02 , but I could not find out any spool request. More interesting, with the existing config and message setting , we were getting print out till one day ago but presently it is not working.
                  Hoping for corrective solution.
    Regards,
    Partha

    Hi,
    check t.code SPAD and involve Basis Consultant.
    Also check NACE t.code for Program, std form,routine, medium
    Note:
    Customisation steps for Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
    Regards,
    Biju K

  • Not getting print preview

    Hi,
    i'm not getting print preview screen when using a standard print program with a smart form.
    i cant change the print program..is there any other way?

    hi
    check for these options
    DATA:     gs_control          TYPE ssfctrlop,
              gs_output_options   TYPE ssfcompop,
      'X' TO gs_control-no_dialog,
      'X' TO gs_control-getotf,
      'PRINTER' TO gs_control-device,
      'LOCL'(047) TO gs_output_options-tddest.
    if there is osme table controlling the flow disable that or u may remove it from calling program
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = 'ZLB_BIL_INVOICE'
        IMPORTING
          fm_name            = lv_fnam
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CALL FUNCTION lv_fnam
        EXPORTING
          control_parameters = gs_control          * "" Disable these two options*
          output_options     = gs_output_options  * "" same here*
          user_settings      = space
          is_bil_invoice     = lv_bill_invoice
          is_nast            = lv_nast
          is_repeat          = space
        IMPORTING
          job_output_info    = gs_job_output_info
        EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
      IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    shiva

  • Google cloud print for officejet pro 8600 - could not get printer information from hp.

    I just purchased a new OfficeJet Pro 8600 today. Everything seems to work great except for the connector to Google Cloud Print. I can print from AirPrint, as well as emails to the hpeprint.com address, but when I try to register via the google site, I receive the "could not get printer information from HP" error message.
    The printer is connected via wireless ethernet, and seems to work find otherwise. I have no restrictions on who can send print jobs, and I have changed the email address for hpeprint.com a few times, as suggested in other forum threads, but it can never connect to the the Cloud Print service. I am at the latest firmware level listed on the HP website. I have tried to initiate the connection from multiple PC's as well as multiple web browsers.
    This was a big factor in purchasing this printer. Help anyone?
    This question was solved.
    View Solution.

    Hey rch33k, I am sorry for the ongoing issue that you are having accessing Google Cloud Print. This is being looked into as this is not a singular issue and is affecting other customers as well.  Engineers are currently investing this problem to try and provide a solution to it.  I want to again apologize and thank you all for your patience in this matter.  They only other thing to attempt at this time is to contact Google for further assistance to see if anything can be done on their end. Hopefully this will be fixed quickly
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Google cloud print "could not get printer information from hp"

    As of today google cloud print has stopped working with my laser jet pro. I started getting an error message that "hp eprint is unavailable at this time". I decided to remove my hp printer from google cloud print. I haven't been able to add it back in since. Every time I try to verify the printer with google cloud print I get the error message "could not get printer information from hp". Everything seems to be configured properly as far as I can tell. I even removed the printer from hp connected and readded the printer and have changed my printers email address. Help please! I am on Chrome OS and this is the only option I have to print.  

    The issue just kind of resolved itself today and I was able to add the printer. I'm assuming it was some kind of server issue on hp's end because I haven't changed anything since yesterday. 

  • Reports not getting printed

    My reports are not getting printed on Laser printer.I am using psl132.prt file in desformat. After giving the print command, printer showing message "Processing Job" for 5 sec and after that it is showing "Data Received" and "Ready " message. My reports are character mode. Some of my reports are getting printed using the same prt file.

    psl132.prt is postscript landscape - you need different .prt file, or change your report to bitmap.

Maybe you are looking for

  • How Do I Always Boot From An External Drive

    I successfully installed Mac OS X 10.4.8 on an external hard drive. It boots successfully into OS X, but only if you press option on boot and select the drive or if you boot from the drive inside my Mac Mini and go to startup disk and select the exte

  • How to build in user authorisation in sender soap adapter

    HI , how can i built the user authorisation in sender soap adapter. either in a url or somewhere on the server . if anyone has an idea do let me knwo Thanks Nikhil

  • NullPointerException with Default Value

    Hi, We got an int field in a class. On the database this row can contaion null-values. With TopLink 9 everything was ok but with 10 under Java 1.3 it fails with the following exception: Is this a bug in 10? Thanks, Simon Exception [TOPLINK-71] (Oracl

  • Adobe FMRMS 1.5 to 2.0 diffrences

    Hello We see that media that loads from our old 1.5 server displays differently then media from our 2.0 server Is our server controlling that displayed text?

  • View of variables declared within a package/procedure

    Does anyone know of a view which holds all the variables declared within a package/function/procedure? I can see that _arguments holds the parameters defined. PLSQL Developer displays these things in their drop downs, so I assume they are either gett