Barocodes in PDF format
Hi Experts,
I am getting the barcodes on my form in proper format.
However when I download the same barcode form in PDF the barocode comes with a sticky note which I dont need.
Please let me know how can I remove the sticky note.
Thanks,
Abhishek
Abhishek,
I did not understand what is meant by sticky note in this case.
Can you attach the problematic part of your form?
Than you,
Surya
Similar Messages
-
I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.
I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.
-
Problem with scanning document in PDF format to computer
has anyone had a problem with scanning to the computer a document in pdf format from hp Photosmart 7525 e-All-in-One series wireless printer? The document appears in My Documents but when I try and open the document I get an error message that says the document cannot be opened. I can scan and open the document in TIF format. I am running Windows 7 Home Premium and I just installed the Photosmart 7525 printer. I've uninstalled and reinstalled the printer using the CD download.
This question was solved.
View Solution.Hi,
Can you open other pdf files ? Do you have Adobe Reader in your computer ? Please download and install it on your machine then try to open file(s) again:
http://get.adobe.com/reader/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Payment advices in F110 to be sent by email (PDF format) - step by step
Hi SDN,
We have a requirement to automatically send payment advices in F110 via email. The requirement is to send the file in PDF format. I've done a lot of browsing through in the forums, as well as check SAP notes, but none has really detailed a step by step process on how to go about it.
I've also checked SAP NOTE 836169, but it is also not that detailed.
Assuming that SCOT has been already set up by BASIS, I've done the following steps to test if the auto-email works, and here are the steps I did.
1. Vendor Master Data -Define u2018Std communication methodu2019 as SMTP (Internet mail) and maintain an email address in the vendor master data.
3. T-Code BERP u2013 Code to find the relevant BTE. Use the Selection Attribute to browse for your business area. In my case, it is AP-Payment Transactions hence FI-AP-AP-PT.
00002040 is the relevant process. This is a Function called SAMPLE_PROCESS_00002040. In this case, the FM only checks for an email address in the Vendor Master. If more logic is required a Z-version would need to be created.
4. Use t-code FIBF to create the enhancement.
a) Create a product.
A product groups together customer enhancements to BTEu2019s developed in the customer's namespace. All customer enhancements assigned to a certain customer product can be released with the Activate Customer Product indicator. The OPEN_FI function module for a certain customer enhancement cannot find the corresponding customer function modules, until this has been done.
Create the product name (for example ZMAIL) and make it active.
FIBF->Settings->Products->u2026of a Customer
b) Assign the BTE to the FM:
Settings->Process Modules->u2026of a customer
Assign the 00002040 process to the FM and Product.
5. Run the autopayment program F110.
After I run the following steps, no email is being generated by the system. Is there anything that I still need to do? Or could anybody please kindly provide a step-by-step process? I'm a functional person, so I won't be able to do ABAP programming for this. Thanks and regards to allHello,
Check SCOT and SOST transactions.
At a previous client using 4.6C we did a program and allocated it in F110. The program reviewed the payment tables and sent the payment advice (basic list) to the employee vendors.
Also check http://wiki.sdn.sap.com/wiki/display/sandbox/SendMailwithPDFAttachment
Regards
Waza -
Report for converting the documents into the PDF format.
Hello Experts,
I need to know if any report/ T-code is available in SAP to convert the files into PDF format.
We are processsong these PDF's then into IXOS system.
Regards,
Anna.Hello ,
You may check with the below programs:
Program name Report title
RSTXCPDF Routines for Converting OTF Format to PDF Format
RSTXPDF2 Administration/Upload of type 1 and TrueType font files
RSTXPDF3 Customizing for OTF-PDF Conversion
RSTXPDF4 Help Report from CONVERT_OTFSPOOLJOB_2_PDF
RSTXPDF5 Help Report from CONVERT_ABAPSPOOLJOB_2_PDF
RSTXPDFT Test report for PDF conversion - converting standard texts to PDF
RSTXPDFT2
RSTXPDFT3 Test
RSTXPDFT4 Convert SAPscript (OTF) or ABAP Lists Spool Job by PDF
RSTXPDFT5 Test: GUI Download of Spool Request
Regards
Ramesh Ch -
How do you convert AutoCAD DWF files to a PDF format. These are blue prints and I was told by Adobe to use the Acrobat DC program so that's what I did but now I am only getting half of a drawing on a page. Is this as simple as a setting?
Hi subscription question,
I've checked your account; it looks like you tried to place two separate orders this morning, but it doesn't appear that either went through. However, it does sound as though you've been able to convert a file successfully. What happens when you log in to your account at https://cloud.acrobat.com/files? Do you see your converted file there? All converted files are automatically stored in your online account, even when you convert from within Reader.
Best,
Sara -
Report in PDF format and email it to some clients, using Database Trigger
Hi
Is it possible to run a report in PDF format ad email it to some clients after a specific event through Database Trigger. For example whenever a client makes an entry into order entry table (through entry form), a trigger should execute on Orders table, this trigger should execute or generate a PDF formatted report and finally mail it to Sales team?
I have
ORAS 10g(10.1.2.0.2)
utl_mail configured.In Reportsconfig.properties file the http port is 7778,
now the output is like this...
SQL> /
* WELCOME TO EVENT-BASED-REPORTING API *
* API-Version : 9i *
* (C) Oracle Corporation, 2000 - 2002 *
* Debugging turned ON **************************
*** Length of Paramlist : 1
OK : Parameter added : GATEWAY=http://myserver.com:7778/reports/rwservlet
*** Length of Paramlist : 2
OK : Parameter added : SERVER=rep_myserver_oracleas2
*** Length of Paramlist : 3
OK : Parameter added : REPORT=D:\Reports\emp.rdf
*** Length of Paramlist : 4
OK : Parameter added : USERID=abc/xyz@mydb
*** Length of Paramlist : 5
OK : Parameter added : DESTYPE=mail
*** Length of Paramlist : 6
OK : Parameter added : DESFORMAT=PDF
*** Length of Paramlist : 7
OK : Parameter added : [email protected]
Starting run_report: building url
*** Building URL (RUN_REPORT)
OK : URL built :
http://myserver.com:7778/reports/rwservlet?SERVER=rep_myserver_oracleas2&REPO
RT=D%3A%CReports%5Cemp.rdf&USERID=abc%2Fxyz%40mydb&DESTYPE=mail&D
ESFORMAT=PDF&DESNAME=khan.emran84%40gmail.com&statusformat=xml
*** Submitting HTTP Request
*** using URL
:http://myserver.com:7778/reports/rwservlet?SERVER=rep_myserver_oracleas2&REP
ORT=D%3A%5CReports%5Cemp.rdf&USERID=abc%2Fxyz%40mydb&DESTYPE=mail&
DESFORMAT=PDF&DESNAME=khan.emran84%40gmail.com&statusformat=xml
OK : Request submitted - Return stream : <?xml version = '1.0' encoding =
'ISO-8859-1' standalone = 'yes'?>
<serverQueues>
<error code="50159"
component="REP" message="Executed successfully but there were some errors when
distribute the output"/>
<
OK : Request submitted - Length of stream : 229
*** XML-Parsed - Following Structure discovered :
*** Checking elements!
serverQueues ()
*** Checking attributes!
error
*** Checking attributes!
__code = 50159
__component = REP
__message = Executed successfully but there were some errors when distribute the
output
*** Finished Parsing XML
Getting value for element: job
Getting value for element: error
*** Requesting value for Attribute error.component [REP]
Getting value for element: error
*** Requesting value for Attribute error.code [50159]
Getting value for element: error
*** Requesting value for Attribute error.message [Executed successfully but
there were some errors when distribute the output]
REP-50159:Executed successfully but there were some errors when distribute the
output
declare
ERROR at line 1:
ORA-20999:
ORA-06512: at "NRSP.SRW", line 264
ORA-06512: at "NRSP.SRW", line 799
ORA-06512: at line 15 -
ESS Report in PDF Format-HTML Format
Dear All,
I have made a report in R3 and publish it in ITS for ESS.
But out put not properly coming I want to see it in PDF format .
Like when we use Payslip for tcode PZ11_PDF .
Kindly help me.
Thanking you in advance
SiladityaHi
Use the fun modules
CONVERT_OTF_2_PDF or
CONVERT_ABAPSPOOLJOB_2_PDF
for converting the output to PDF format
<b>Reward points for useful Answers</b>
Regards
Anji -
How to generate jasper report in pdf format using swing
hi all,
im new to swing and jasper.. can anybody provide me some example on how to generate the jasper report in pdf format? i will call the reportManager from sessionBean.. below is my code:
1)delegate:
public GenerateReportDto generateIntoPdfReport(String fileName, String outputFileName, Map parameters){
GenerateReportDto generateReportDto = getAuditTrailServiceRemote().generateIntoPdfReport(fileName, outputFileName, parameters);
return generateReportDto;
2)sessionBean:
public GenerateReportDto generateIntoPdfReport(String fileName, String outputFileName, Map parameters){
//Map parameters = new HashMap();
ReportManager reportManager = new ReportManager();
3)ReportManager()
public void generateIntoPdfReport(String fileName, String outputFileName, Map parameters) {
Connection conn = null;
try {
conn = dataSource.getConnection();
//Generate the report to bytes
File reportFile = new File(fileName);
byte[] bytes =
JasperRunManager.runReportToPdf(
reportFile.getPath(),
parameters,
conn
//conn.close();
//Write the bytes to a file
ByteBuffer buf = ByteBuffer.wrap(bytes);
File file = new File(outputFileName);
// (if the file exists)
boolean append = false;
// Create a writable file channel
FileChannel wChannel = new FileOutputStream(file, append).getChannel();
// Write the ByteBuffer contents; the bytes between the ByteBuffer's
// position and the limit is written to the file
wChannel.write(buf);
// Close the file
wChannel.close();
} finally {
if (conn != null) {
conn.close();
Any help would be highly appreciated. Thanks in advanceHi ,
One 'simple' way is by using the DBMS_SCHEDULER db package and the procedure CREATE_JOB(....) using as job_type the value 'EXECUTABLE'...
Read for further info in 'PL/SQL Packages and Types Reference'.
If you have access to OEM ... you can configure this there using wizard.....
Other way is to use the External Procedure call capabiblity of Oracle DB Server...:
http://www.oracle.com/pls/db102/ranked?word=external+procedure+call&remark=federated_search
My greetings,
Sim -
While generating reports in Oracle BI Publisher in pdf format, the generated pdf reports have hindi इ matra displaced by one character. For example, रिपोर्ट is printed as रपेिोरट. Word file generated of the same report have correct hindi इ matra position and also pdf generated from this word file also contains the same.
-
Generating pdf format report in Oracle Reports 6i
Hi everyone,
I am using Report 6i. I am trying to generate a report in pdf format on the web. My problem is only the labels are displayed, while the data is not displayed. No specific error is shown.
But the same report is working fine when generated in HTML format on the web.
Can anyone guide as to what may be the problem in generating this report in pdf format.
Thanks in advance.
Elizabethhi,
can you send the URL used to generate the report. -
Print Report Output in PDF Format
:-) Hiee E'body
I generated the output of a Report(developed in Report Builder 6i) in PDF format.
The output file is created properly and the PDF file gets displayed on the screen in proper format but when i try to print the PDF file it gets printed across the page instead of printing
it straight.
I have checked all page and printer settings but cannot find the reason for this.
If anybody is aware of the solution to this problem please guide me for the same.
Have a nice day !!
Thanking You ..
Vivek Kapoorhello,
sounds like you have a problem with portrait/landscape orientation of your document.
regards,
the oracle reports team --pw -
Problems with the report export in PDF format
Hi All,
I am new to this forum.
I'm developing a web application that uses Java Reporting Component (JRC) to display crystal reports.
I have three problem:
1) I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
2) I want to print multiple reports one after the other to reduce the time (possibly joining two or more reports into a single PDF)
3) I want to insert, in the jsp page filters, the number of pages to print from the same report (without
opening it with Adobe Reader (Microsoft Word))
Can anyone help me? or can give a simple java code to do the same.
Thanks in advance.Hi, this works for me in 4.6B:
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = i_pfad
filetype = 'BIN'
IMPORTING
FILELENGTH =
TABLES
data_tab = i_att_cont
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE i000(zv) WITH 'Problem mit PDF Darstellung'.
ENDIF.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = spoolnr.
CALL FUNCTION 'WS_EXECUTE'
EXPORTING
document = ' '
commandline = i_pfad
program = 'AcroRd32.exe'
EXCEPTIONS
frontend_error = 1
no_batch = 2
prog_not_found = 3
illegal_option = 4
gui_refuse_execute = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE i000(zv) WITH 'Acrobat Reader nicht gefunden!'.
ENDIF. -
Displaying Japanese Fonts on Report Builder 10g in PDF format.
Hi,
In one of my Report .I am using Japanese characters.All the contents are static data. If I run from Report builder it gives me perfect result and If I am trying to get output in PDF format from Report builder, I all the Japanese characters changed to some different fonts characters. Same problem with Report Server.
Thanks in Advance
I appreciate your Help.Hi,
Try using the 'PDF Subsetting' feature.Go through the Chapter-Using PDF in Oracle Reports in "Oracle Application Server Reports Services Publishing Reports to the Web" - http://www.oracle.com/technology/documentation/reports.html.
Hope this will help you.
Thanks,
Vidya -
Save the report in PDF format on the server: is it possible?
Hi all,
Is it possible to save the report in PDF format on the server?
In other words, in a web application:
1) the user requests a report
2) the report produced in PDF format, is saved on the server, where is the Java Reporting Component
3) the report, in PDF format, is sent to the client's user
Thanks a lotPrintOutputController.export, get the byte stream, save on server.
Sincerely,
Ted Ueda
Maybe you are looking for
-
Audio Limiter does not switch back to normal Levels in Premiere CS6
I put a limiter on the Master Track with -8 dB (as required from the TV station). At the beginning of the movie the unlimited Levels from a music track go up to 0dB for a certain amount of time - in the master track they are logically limited at -8dB
-
HT3702 My credit card is declined without apparent reason. How can I rectify this?
My credit card is declined without apparent reason. How can I rectify this? I do not want to use another card because of children securiity reasons.
-
No message for validation error "format", type "date", field "date-expired"
Dear Guys, i am getting the following error : ((No message for validation error "format", type "date", field "date-expired")) When trying to upload adobe connect 7 license to the adobe connect 7 configuration wizard. the problem occurs because my ser
-
Firefox won't launch Zimbra Desktop for mailto links
Windows 7 Home Premium 64 bit Core 2 Duo Running Firefox 26. Installed Zimbra Desktop Email client, when I click mailto links it only offers Yahoo and Gmail. In IE and other programs Zimbra launches when I use email features of those programs. Zimbra
-
Hello, i'm trying to bulk insert data into planning and i get an error. As i can understand it seems related to some bad settings regarding decimal separator. I'm from italy where default decimal separator is ",". As far as i can check everything is