BASED ON QUEUE NAME HOW CAN WE FIND THE SENDER SYSTEM IN ECC

Based on queue name how to identify the sender system
the issue is
Messages are are coming from pi to ecc , check below queues. These are incoming queues
to Ecc from PI. We are trying to find what these queues are. Sometimes these
are failing and we are not able to process,
Based on the above information we need to find the sender system from where it is coming.
Regards
MADHU

Hi srinivas- Thanks for your reply and there is no issue on pi side after reaching to ecc the entries got stucking in smq2 of ecc system now the target system wants to know on which sender system these messges are coming we are not finding sender system detials from smq2 of ecc system .
Regards
Madhus

Similar Messages

How can i find the meta chain name?

My process chains are running based on meta chain option,So how can i find the meta chain name???

Hello
Goto SE16
Table RSPCCHAIN
ut u r local chain name as varient and exe
similerly goback if the chain you get is also a local chain....Until you get only one chain...
Where Used List --
RSPCPROCESSLOG table
You can see the Process Logs at SM37 too based on the Technical name of the Chain you can trace the Meta chian
Thanks
Geeta

How can I find the specific channel name and modify channel name in automatically in VBS?

How can I find the specific channel name and modify channel name in automatically in VBS? (DIAdem 9.1)
I would like to change channel name = "speed01" ... "speed10" to channel name = "velocity01"..."velocity10.
martino

Hello Martino,
this script will help:
Option Explicit
Dim i
Dim n
For i=1 To 10
If i < 10 then
n = CNo("speed0" & i)
Else
n = CNo("speed" & i)
End If
If n > 0 Then
If i < 10 then
ChnName(n) = "velocitiy0" & i
Else
ChnName(n) = "velocitiy" & i
End If
End If
Next
Matthias
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?

How can i find the available JDBC driver name?

hi,
can anyone tell me how can i find the JDBC driver name in XI

Hi
The available JDBC drivers can be viewed in the file found in the following path in ur XI server
:\usr\sap\XR3\DVEBMGS00\j2ee\cluster\server0\bin\ext\
regards
krishna

How can I find the dns names ?

those what are made in the control panel...

how can I find the dns names ?That is OS specific thus you must either use Runtime.exec() or use JNI to get to the names.
If you search this forum you will find more specific suggestions on how to get them.

How can we find the most usage and lowest usage of table in Sql Server by T-SQL

how can we find the most usage and lowest usage of table in Sql Server by T-SQL
The table has time stamp column
StartedOn datetime
EndedOn datetime

The Below query has been used , but the textdata column doesnot include the name of the table ServiceLog.
SELECT
FROM
databasename,
duration
fn_trace_gettable('F:\Program
Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\log_148.trc',
default)
WHERE
DATABASENAME='ZTCFUTURE'
AND TEXTDATA
IS
NOT
NULL
--AND TEXTDATA LIKE 'SERVICE%'
order
by cpu
desc;

How can I find the index from a specific container?

How can I find the index from a specific container?
For example, if I'm traversing through textframes like so (an example, not tested):
var doc = app.activeDocument;
var story = doc.pages[0].textFrames[0].parentStory;
for (var i=0, l=story.textContainers.length; i<l; i++) {
     var textFrame = story.textContainers[i];
     if (textFrame.constructor.name == "TextFrame") {
          var lastPara = textFrame.paragraphs.lastItem();        //How can I find the index of this in relation to the story?
How can I find the index of "lastPara" in relation to the story rather than the current container?
I tried:
var newPara = story.paragraphs[lastPara.index];
but this results in an invalid object. . .
alert(newPara.isValid);      //returns false

The .index property is the character offset. So lastPara will begin at story.characters[lastPara.index].

I had 2 games of clash of clans on 1 game centre. Now I can only see one? How can I find the other one?

My kids had 2 games of clash of clans on 1 game centre. Now I can only see one? How can I find the other one?
My daughter set up a game centre on her ipad. My son, on his ipad used the same game centre log in. He then set up his own game of clash of clans. After my son set up his Clash of Clans, my daugher set up her own Clash of Clans using the same game centre log in on her ipad. Both were using the Clash of Clans successfully on their own ipads using the same game centre log in.
One day my son signed into someone elses Clash of Clans, since then he is unable to go back to his Clash of Clans and can only see his sisters.
Please let me know if this can be resolved.
We wish to delete my daughters Clash of Clans - as she does not use it at all. We would like to regain access to my sons.
My son can visit his Clash of Clans - his clan name is 'The Big Boys' He has a shield that is blue with a yellow lightning from top right to bottom left. His name is Fat Poo (I know ridiculous).
If you can help us or advise us what to do we would make my son very happy
thanks

Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo

How can i find the installed forms version in 6i...?

Dear all,
How can i find the installed forms version in 6i, the situation is we have given a solution which will work in only forms6i latest version, before implementing the same we need to check whether the forms latest version has been installed or not
Is there any way to find out without opening the forms builder..?
Even if we un install the forms from a machine, the forms60_path variable will remain in regedit, so we cannot go based on that and aslo i dont know whether regedit will have the version details and all.
It would be greatly appreciated if any one can give a solution.
Thanks in Advance.
Thangaraj.

you query the registry, the registry has the version number saved, but I cannot remember exactly where and I don't have 6i Installed on my machine.
You just open the Forms Builder and click on Help/About.
But Jan's method is the best.

How can I find the schemas used in a database? Any system table contains?

How can I find the schemas used in a database?
Any system table contains?
I would like to know sql statement (dictionary object name) which tells the all schema s in a database like dba_users.

Hello,
this SQL should help:
db2 "select schemaname from syscat.schemata"

How can i find the 1st business day of the week ?

Hi,
How can i find the 1st business day of the week excluding saturaday,sunday and holidays? i have holiday table which contains the columns name HolidayDate and HolidayDescription.
Ex:
10-1-2011 is monday(i.e) 1st business day.check If it is in holiday table,then return the result as 11-1-2011 else return the result as 11-1-2011(which is the first business day of this week).
Can anyone tell me the Query to solve it?

Does this help:
SQL> ed
Wrote file afiedt.buf
1 with t as (SELECT TRUNC(SYSDATE,'IW') holiday FROM dual
2 UNION SELECT TRUNC(SYSDATE + 7,'IW') from dual)
3 SELECT MIN(Dat),wk FROM
4 (SELECT TO_CHAR(dat,'IW') wk,dat FROM
5 (SELECT dat + lvl dat FROM
6 (SELECT TRUNC(SYSDATE,'RRRR') dat, level - 1 lvl
7 FROM dual
8 CONNECT BY level <= TO_DATE('31-DEC'||TO_CHAR(SYSDATE,'RRRR')) - TRUNC(SYSDATE,'RRRR'))
9 ) x
10 WHERE x.dat NOT IN (select holiday from t))
11 WHERE TO_CHAR(Dat,'DY') <> 'SAT'
12 AND TO_CHAR(dat,'DY') <> 'SUN'
13* group by wk
SQL> /
MIN(DAT) WK
04-JAN-11 01 -- since 03-JAN-2011 is in holiday list, 04 is taken as first business day of first week
11-JAN-11 02 -- similar to week 1
17-JAN-11 03
24-JAN-11 04
31-JAN-11 05
07-FEB-11 06
14-FEB-11 07
21-FEB-11 08
28-FEB-11 09
07-MAR-11 10
14-MAR-11 11
21-MAR-11 12
28-MAR-11 13
04-APR-11 14
11-APR-11 15
18-APR-11 16
25-APR-11 17
02-MAY-11 18
09-MAY-11 19
16-MAY-11 20
23-MAY-11 21
30-MAY-11 22
06-JUN-11 23
13-JUN-11 24
20-JUN-11 25
27-JUN-11 26
04-JUL-11 27
11-JUL-11 28
18-JUL-11 29
25-JUL-11 30
01-AUG-11 31
08-AUG-11 32
15-AUG-11 33
22-AUG-11 34
29-AUG-11 35
05-SEP-11 36
12-SEP-11 37
19-SEP-11 38
26-SEP-11 39
03-OCT-11 40
10-OCT-11 41
17-OCT-11 42
24-OCT-11 43
31-OCT-11 44
07-NOV-11 45
14-NOV-11 46
21-NOV-11 47
28-NOV-11 48
05-DEC-11 49
12-DEC-11 50
19-DEC-11 51
26-DEC-11 52
52 rows selected.
SQL>

How can we find the list of user exits for a transaction

hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadish

hi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
             http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen

How can I find the all path available for a MPLS VPN in SP network

How can I find the all path available for a MPLS VPN in SP network between PE to PE and CE to CE?

Hi There
If we need to find all the available paths for a remote CE from a local PE it will depend upon whether its a RR or non-RR design. If the MP-iBGP deisgn is non-RR the below vrf specific command
sh ip bgp vpnv4 vrf "vrf_name" will show us the MP-iBGP RT for that particular VPN. It will show us the next hop. Checking the route for same in the Global RT will show us the path(s) available for same ( load-balancing considered) .Then we can do a trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback to get the physical Hops involved.
However if the design is RR-based there might be complications involved when the RR is in the forwarding path ie we have NHS being set to RR-MP-iBGP loopback and the trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback will get us the physical Hops involved.
If we have redundant RRs being used with NHS being set then the output of sh ip bgp vpnv4 vrf "vrf_name" will show us two different available paths for the remote CE destination but just one being used.
RR-based design with no NHS being used will always to cater to single path for the remote CE detsination.
So in any case the actual path used for the remote CE connectivity would be a single unless we are using load-balancing.
Hope this helps you a bit on your requirement
Thanks & Regards
Vaibhava Varma

How can I find the AR receipt corresponding the receipt batch in R11?

Dear all:
As the topic, how can I find the AR receipt corresponding the receipt batch in R11? Any SQL can supply to check? Thank you !!
Regards

Dear all:
I try the SQL as follow, it can be found.
select aa.cash_receipt_id , aa.amount , aa.set_of_books_id ,aa.currency_code,aa.pay_from_customer ,aa.status ,aa.type,aa.receipt_number,aa.receipt_date , aa.exchange_date ,aa.deposit_date,
aa.cash_receipt_id,bb.batch_id,name
from ar_cash_receipts_all aa, ar_cash_receipt_history_all bb , ar_batches_all cc
where aa.cash_receipt_id = bb.cash_receipt_id
and bb.batch_id = cc.batch_id
and aa.receipt_number in('99650')
Regards

HT201386 how can I find the Image number of a particular photo in the Photos app included with iPad Air?

how can I find the Image number of a particular photo in the Photos app included with iPad Air?

Hello yamacutta,
Thanks for using Apple Support Communities.
The Photos app will not show you the actual file name of the photo. However when you go through the image import process on your computer, you should be able to see both the thumbnail of the photo, as well as the filename of the image.
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
Take care,
Alex H.

BASED ON QUEUE NAME HOW CAN WE FIND THE SENDER SYSTEM IN ECC

Similar Messages

Maybe you are looking for