Basic Authentication:The request failed with HTTP status 401: Unauthorized.

Are there any problems with Basic Authentication? I have a test BPC 5.1 SP3 single server installation. When I set the IIS Virtual Directory to use Basic Authentication instead of Integrated Security, I get a 401 Unauthorized. It works fine when I use Integrated Security.
Thanks,
Stephen
Server Error in '/OSoft' Application.
The request failed with HTTP status 401: Unauthorized.
System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
[WebException: The request failed with HTTP status 401: Unauthorized.]
   OSoft.Consumers.ZFP.WebBase.Utility.GetLastUserApp(CPMUser& mUser, String strAppServerURL, String strSecurity, String strContext, Boolean bServerPathReset) +1498
   OSoft.Consumers.ZFP.WebBase.PageBase.Page_Init(Object sender, EventArgs e) +216
   System.EventHandler.Invoke(Object sender, EventArgs e) +0
   System.Web.UI.Control.OnInit(EventArgs e) +67
   System.Web.UI.Control.InitRecursive(Control namingContainer) +241
   System.Web.UI.Page.ProcessRequestMain() +197

This issue is not really related to SP3 upgrade it is more a problem of windows. Tos solve this issue please read the follow article from Microsoft and do the steps requested to solve this issue.
http://support.microsoft.com/kb/926642/
After rebooting your server your access issue using Basic authentication should be solved.
This problem happen usually into multiserver environment.
So I would like to know if you are using domain users with local users in the same time on that computer.
Because even that can be a problem.
Regards
Sorin Radulescu

Similar Messages

  • Getting error "The request failed with HTTP status 401: Unauthorized " for _vti_bin/Authentication.asmx

    Hi All,
    My Web application is FBA application and I am using the lists.asmx services in my custom webpart. To run this lists.asmx service in FBA enabled site we need to use Authentication.asmx service..
    I referred this link:
    http://social.msdn.microsoft.com/Forums/en-US/sharepointdevelopment/thread/21867e28-75d5-42c8-850b-bfb5c5894eed .
    I wrote a code as mentioned in this article but now I am getting  error "The request failed with HTTP status 401: Unauthorized " for Authentication.asmx service itself. Can somebody help me why it is not working even everything looks
    correct?
    Thank you.
    Regards,
    Rahul Shinde.

    Hi Rahul,
    Give permissions to the user on the web application.
    Central Admin -->Application Management --> Application Security -->Policy for web application --> Select the
    web application --> Add User
    For more information, refer to
    http://microsoftdev.blogspot.com/2009/10/sharepoint-web-services-access-give.html
    http://www.codeproject.com/Articles/24244/Access-a-Forms-Based-SharePoint-Site-s-Web-Service
    Best Regards.
    Kelly Chen
    TechNet Community Support

  • Ssrs 2008 r2 The request failed with HTTP status 401: Unauthorized.

    hello,
    I created a report from one user who is owner of sharepoint site ,where sharepoint foundation site is installed.
    but when i tried to access that report from another machine with same user owner of the site ,i received the error message as
    the request failed with http status 401 unauthorized.
    please help.
    thanks

    Hi Krishnakumar_DeV,
    The Reporting Services Web service must use Windows integrated authentication in SharePoint integrated mode. If it is set to Basic, Anonymous, or otherwise, it will not function as expected, if at all.
    The HTTP 401 error may occur if the Reporting Services integration has been configured to use Windows authentication, while Kerberos authentication has not been configured correctly. In order to solve the problem, we can configure the data source to use
    stored credentials or refer to the solutions in the "5.4 The request failed with HTTP status 401: Unauthorized" section of the following article:
    http://msdn.microsoft.com/en-us/library/ee384252(v=sql.100).aspx
    Hope this helps.
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Problems connecting to SSRS using IReportServerCredentials, the request failed with http status 401: unauthorized

    We have a hosted SSRS server and we access it's reports using the reportviewer in an ASP.net application.
    We are getting the error: The request failed with HTTP status 401: Unauthorized. When trying to run one of the reports. I have confirmed that the login details work when logging into the report manager page directly.
    I have implemented an instance of IReportServerCredentials in a separate class (below) and I call it from the page before it tries to access the report. I'm not sure if this is all I need but can't seem to find any other info.
    I have managed to gain access connecting to the external server from my PC and accessed the report, but when I promote the code to production and run it from there on my local PC I get the unauthorized message again: the request failed with http status
    401: unauthorized
    The class:
    [Serializable]
    public sealed class MyReportServerCredentials :
    IReportServerCredentials
    public WindowsIdentity ImpersonationUser
    get
    // Use the default Windows user. Credentials will be
    // provided by the NetworkCredentials property.
    return null;
    public ICredentials NetworkCredentials
    get
    // Read the user information from the Web.config file.
    // By reading the information on demand instead of
    // storing it, the credentials will not be stored in
    // session, reducing the vulnerable surface area to the
    // Web.config file, which can be secured with an ACL.
    // User name
    string userName =
    ConfigurationManager.AppSettings
    ["MyReportViewerUser"];
    if (string.IsNullOrEmpty(userName))
    throw new Exception(
    "Missing user name from web.config file");
    // Password
    string password =
    ConfigurationManager.AppSettings
    ["MyReportViewerPassword"];
    if (string.IsNullOrEmpty(password))
    throw new Exception(
    "Missing password from web.config file");
    // Domain
    string domain =
    ConfigurationManager.AppSettings
    ["MyReportViewerDomain"];
    return new NetworkCredential(userName, password);
    public bool GetFormsCredentials(out Cookie authCookie,
    out string userName, out string password,
    out string authority)
    authCookie = null;
    userName = null;
    password = null;
    authority = null;
    // Not using form credentials
    return false;
    The call to the class, just before the report is run:
    if (GetConnection.GetConnectionString().ToString().Contains("IP of external server removed"))
    invoiceviewer.ServerReport.ReportServerCredentials = new MyReportServerCredentials();
    We have tried so many things here, we don't even care whether the server authenticates or not but it appears to be as standard. Our hosting company has also drawn a blank and changed so many settings to no ava

    Hi Nasa1999,
    According to your description, you are getting the error: The request failed with HTTP status 401: Unauthorized when you access the report using the ReportViewer in an ASP.net application.
    Regarding the 401 error, it could cause by the Service Principal Name(SPN) for the account the Reporting Services is running under hasn’t been registered when the Reporting Services is configured to use Kerberos authentication. So in your scenario,
    please check if you are using Kerberos authentication. If that is a case, please make sure SPN is configured correctly. For more information, please refer to the similar thread:
    The request failed with HTTP status 401: Unauthorized. in SSRS.
    If issue persists, please check the Reporting Service error log (default location: %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles) around the time that the error message thrown out.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • "The request failed with HTTP status 401: Unauthorized"

    Hi,
    I'm trying to get both RSS feeds and SSRS reports on a web application which is having NTLM authentication without Kerberos. The catch is proxy setting, if I give <proxy autoDetect="false" /> in web.config of my sharepoint web
    application SSRS reports will be rendered in SQL Server Report viewer perfectly (I deploy using BIDS), but RSS viewer webpart will not display my internet feeds. If I give
    <proxy autoDetect="true" /> RSS feeds are displayed properly but SSRS report will throw the following error.
    The request failed with HTTP status 401: Unauthorized.
    Description:
    An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [WebException: The request failed with HTTP status 401: Unauthorized.]
    System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +412862
    System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +300
    Microsoft.SqlServer.ReportingServices2005.Execution.ReportExecutionService.ListRenderingExtensions() +53
    Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.ListRenderingExtensions() +207
    Microsoft.Reporting.WebForms.ServerReport.ListRenderingExtensions() +130
    Microsoft.ReportingServices.SharePoint.UI.WebParts.ActionMenu.OnPreRender(EventArgs e) +180
    System.Web.UI.Control.PreRenderRecursiveInternal() +108
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3394
    I tried to work around this by adding proxy settings with bypass list.
    <system.net>
        <defaultProxy useDefaultCredentials="true">
          <proxy proxyaddress="http://<proxy IP address>:<port>" bypassonlocal="true" usesystemdefault="true" />
          <bypasslist>
      <add address="<my report server>" />
      <add address="http://<report server>:8080/reportserver/" /> 
      <add address="<IP of my report server>" />
          </bypasslist>
        </defaultProxy>
    </system.net>
    This makes RSS feed to work but SSRS throw the above error. I would need some advice from Microsoft on how to fix this.
    Note: My sharepoint site cannot be anonymous. I have just once service account that runs sql server service, report service, sharepoint services etc. This account is local admin on all servers, has highest access on sql box, run SSRS web service and app
    pools, etc.
    I have four servers, 2 WFE in windows load balanced, 1 app server (running Central admin and report service in sharepoint integrated mode), 1 db server hosting all content and config dbs and report server db.
    Regards,
    Manoj
    Version Information: Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3618

    Hi,
    Thanks to share your post.
    For the issue,
    do you mean that the error happen with the use of NTLM authentication without Kerberos? If yes, the possible cause should be the lacking of Kerberos.
     My suggestion is to implement the Kerberos authentication in your environment. You may check it and test it. For the detailed steps of implementing of the Kerberos:
    http://blogs.msdn.com/b/martinkearn/archive/2007/04/23/configuring-kerberos-for-sharepoint-2007-part-1-base-configuration-for-sharepoint.aspx.
    http://blogs.msdn.com/b/james_world/archive/2007/08/20/essential-guide-to-kerberos-in-sharepoint.aspx.
    Hope this could help you!
    Leo

  • SSRS 2012 - The request failed with HTTP status 401: Unauthorized.

    I have SSRS Reporting Services 2012 load balanced on two servers. 
    Both servers are running Windows Server 2012 R2.
    I have a Web Application that renders reports by utilizing this SSRS Reporting Services 2012. 
    When the application generates a report using load balancing I get error the message, “The request failed with HTTP status 401: Unauthorized.”
    However, using only one reporting server, the application is able to render the report just fine. 
    It seems that when the requests are shared between the servers the problem occurs.
    One solution is to configure Load Balancing with “Source IP” persistence. 
    This seems to work.  I believe this is a “sticky” session. 
    With this Load Balancing configuration, the application can render the report just fine. 
    (However, I have not done complete testing.)
    The problem occurs when calling the service ListChildren(string, bool ) on SSRS. 
    I have been researching online.  I tried modifying the registry on the servers based on online articles (see below.)
    Here are some articles I have looked at.
    http://msdn.microsoft.com/en-us/library/cc281307(v=sql.110).aspx
    http://blogs.msdn.com/b/lukaszp/archive/2008/07/18/reporting-services-http-401-unauthorized-host-headers-require-your-attention.aspx
    http://blogs.msdn.com/b/lukaszp/archive/2008/07/18/reporting-services-http-401-unauthorized-host-headers-require-your-attention.aspx
    Is there a better solution?  Will Load Balancing with “Source IP” persistence be an acceptable solution?  Is there a patch needed for the servers or SSRS?  Please let me know.

    Hi GoGladiator,
    Generally, "The request failed with HTTP status 401: Unauthorized" occurs when
    The service account used to connect to the Report Server is not authorized.
    The Reporting Services is configured to use Kerberos, however, we didn't register Service Principal Name (SPN) for the account the Reporting Services is running under.
    So, to fix this issue, we can refer to the follow steps:
    Make sure the user is able to connect to the Report Server.
    If using Kerberos authentication, please make sure SPN is configured correctly. If using Kerberos authentication, please make sure SPN is configured correctly.
    For more information about Kerberos Authentication and how to register SPN for a report server in Reporting Services, please see the articles below:
    Configure Windows Authentication on the Report Server
    Register a Service Principal Name (SPN) for a Report Server
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • SQL Server Reporting Service 2008 R2 - The request failed with HTTP status 401: Unauthorized.

    I got the error "The request failed with HTTP status 401: Unauthorized." when I call the Reporting Service Web Service.
    The code is very simple:
    // Initialise the reporting service Web Service
    this.RSWebService = new ReportingService2010();
    // Pass windos authentication credentials to Web Service
    this.RSWebService.Credentials = System.Net.CredentialCache.DefaultCredentials;
    // List children
    List<CatalogItem> reports = this.RSWebService.ListChildren(folder, false).ToList();
    The SQL Server is installed on a different machine (say server A) from the Web server (say server B). We are using Windows Server 2003.
    The code work fine for all the scenario below:
    i) Run locally (XP) to call the web service on the sql server
    ii) Provide the Network Credentials with the username, password, and domain when calling the web service
    iii) If the web server and sql server is using same server (i.e. not distributed)
    I'm using windows authentication and impersonation. Any idea?

    Hi Raymond,
    If I understand correctly, the issue only happens in the environment that the web server is different with the SQL Server Reporting Services server. This means the web server is a remote server of the Report Server. Windows Integrated authentication is used
    in this case. When running the web page, the 401 error occurs.
    If so, it is actually a double hop issue. The double-hop problem will usually only be an issue to those of you who write some sort of web-based code (a web application or web service) that uses impersonation.
    To fix the issue, we can configure kerberos authentication for the web application and the SQL Server Reporting Services.
    Below is a great article that has delivered many solutions to fix the issue you met:
    http://odetocode.com/articles/216.aspx
    Additionally, you can read the following article to know more about double-hop:
    http://blogs.technet.com/b/askds/archive/2008/06/13/understanding-kerberos-double-hop.aspx
    http://blogs.msdn.com/b/knowledgecast/archive/2007/01/31/the-double-hop-problem.aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Jin Chen
    Jin Chen - MSFT
    Thanks Jin. I believe this is the cause of the problem as well.
    I tried to register the SPN but unfortunately it still doesn't work. I'm not sure whether I'm using the correct SPN name.
    I have 3 reporting server instance on the SQL box. So the Web Service URL is like
    http://Server:80/VirtualDirectoryDev,
    http://Server:80/VirtualDirectoryTest  and
    http://Server:80/VirtualDirectoryStaging .
    What's the SPN I need to register?
    I tried
    Setspn -a http/Server:80/VirtualDirectoryDev domain\account
    and
    Setspn -a http/aerver:80 domain\account.
    But both of them are not working :(

  • Service Clients failing with "The request failed with HTTP status 401: Unauthorized"

    Hello,
    We have implemented a solution using the SSRS web service clients as produced by the WSDLs.  We have deployed the application on one server, and via the code we are calling the SSRS on another server (i.e., not using ReportViewer, etc.).  We do
    know that the user signed in has permissions since from the same staging server the Report Manager and Reports can both be accessed and viewed.  However, it's only when we run the application and attempt to execute a report on the remote SSRS server that
    we get the following error:
    The request failed with HTTP status 401: Unauthorized. at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String
    methodName, Object[] parameters) at AMC.AssetTracker.Reporting.ReportExecution.ReportExecutionService.LoadReport(String Report, String HistoryID) at AMC.AssetTracker.Reporting.Report.GetReportByteArray() at AMC.AssetTracker.Reporting.Report.get_ReportStream()
    at AMC.AssetTracker.Reporting.Report.get_GetWebUIDisplay() at AMC.AssetTracker.UserControls.AssetTrackerMain.btnGenerate_Click(Object sender, EventArgs e)
    The credentials we have tried are the DefaultCredentials.  One question I have is how do you use custom credentials if neither the DefaultCredentials or the DefaultNetworkCredentials work?  Also, this service call does have to go through an ISA
    server before reaching the SSRS server.
    Any ideas?
    Thanks.

    It sounds like Kerberos authentication is needed in your situation since it's not on the same box.
    There is a one-hop limit with NTLM authentication.
    For more info please see the link below:
    http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/452e9627-cd8e-4709-bdd0-fbafcf9fd719
    Hope this helps!
    Thanks, Michael Mei

  • Error http the request failed with http status 401: unauthorized

    Hi,<o:p></o:p>
    We are currently developing a Web Part for a
    dashboard that connects from SharePoint 2010 to Project Server, we are trying
    to connect via the PSI web service and fetch the project data but it is giving
    the same error "The request failed with HTTP
    status 401: Unauthorized". We are having a huge
    issue with gaining authorization through the PSI and cannot figure out what the
    problem is. We are using Project Server 2010, SharePoint 2010 and Visual Studio
    2010.<o:p></o:p>
    The person developing this has administrative
    rights on both servers and it is running on his account. However, this is his
    first experience with Project Server. Could some provide some guidance?<o:p></o:p>
    Does anyone have any suggestions?<o:p></o:p>
    Thanks,<o:p></o:p>
    Aba
    <o:p></o:p>

    Hi,
    Have the credentials been set for the web service? Or are you trying to pass the credentials of the user accessing the webpart? In the second case, the user must have permissions in project server
    It would be useful if you can share the part of the code that fails
    Paul

  • The request failed with HTTP status 401: Unauthorized Invoke Webservice

    I want Adding a Web reference dynamically at Runtime follow
    SecurityPermissionAttribute(SecurityAction.Demand, Unrestricted = true)]
    internal static object CallWebService(string webServiceAsmxUrl, string serviceName, string methodName, object[] args)
    System.Net.
    WebClient client = new System.Net.WebClient();
    client.Credentials =
    new NetworkCredential("username", "pass");
    // Connect To the web service
    System.IO.
    Stream stream = client.OpenRead(webServiceAsmxUrl + "?wsdl");
    // Now read the WSDL file describing a service.
    ServiceDescription description = ServiceDescription.Read(stream);
    ///// LOAD THE DOM /////////
    // Initialize a service description importer.
    ServiceDescriptionImporter importer = new ServiceDescriptionImporter();
    importer.ProtocolName =
    "Soap12"; // Use SOAP 1.2.
    importer.AddServiceDescription(description,
    null, null);
    // Generate a proxy client.
    importer.Style =
    ServiceDescriptionImportStyle.Client;
    // Generate properties to represent primitive values.
    importer.CodeGenerationOptions = System.Xml.Serialization.
    CodeGenerationOptions.GenerateProperties;
    // Initialize a Code-DOM tree into which we will import the service.
    CodeNamespace nmspace = new CodeNamespace();
    CodeCompileUnit unit1 = new CodeCompileUnit();
    unit1.Namespaces.Add(nmspace);
    // Import the service into the Code-DOM tree. This creates proxy code that uses the service.
    ServiceDescriptionImportWarnings warning = importer.Import(nmspace, unit1);
    if (warning == 0) // If zero then we are good to go
    // Generate the proxy code
    CodeDomProvider provider1 = CodeDomProvider.CreateProvider("CSharp");
    // Compile the assembly proxy with the appropriate references
    string[] assemblyReferences = new string[5] { "System.dll", "System.Web.Services.dll", "System.Web.dll", "System.Xml.dll", "System.Data.dll" };
    CompilerParameters parms = new CompilerParameters(assemblyReferences);
    CompilerResults results = provider1.CompileAssemblyFromDom(parms, unit1);
    // Check For Errors
    if (results.Errors.Count > 0)
    foreach (CompilerError oops in results.Errors)
    System.Diagnostics.
    Debug.WriteLine("========Compiler error============");
    System.Diagnostics.
    Debug.WriteLine(oops.ErrorText);
    throw new System.Exception("Compile Error Occured calling webservice. Check Debug ouput window.");
    // Finally, Invoke the web service method
    object wsvcClass = results.CompiledAssembly.CreateInstance(serviceName);
    MethodInfo mi = wsvcClass.GetType().GetMethod(methodName);
    return mi.Invoke(wsvcClass, args);
    else
    return null;
    When i call CallWebService method , it is error
    The request failed with HTTP status 401: Unauthorized.
    Exception Details: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
    Source Error:
    Line 1880: MethodInfo mi = wsvcClass.GetType().GetMethod(methodName);
    Line 1881:
    Line 1882: return mi.Invoke(wsvcClass, args);
    Help me solve this problem.
    Thanhks

    Thank advance
     I tried it, but it till error
    Stack Trace:
    [WebException: The request failed with HTTP status 401: Unauthorized.]
    System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +431201
    System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +204
    HSCVWS.HelloWorld() +31
    [TargetInvocationException: Exception has been thrown by the target of an invocation.]
    System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0
    System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +71
    System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +350
    System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29
    System.Reflection.MethodBase.Invoke(Object obj, Object[] parameters) +19
    WsProxy.CallWebService(String webServiceAsmxUrl, String serviceName, String methodName, Object[] args) in d:\ViDu01\ttt.aspx.cs:1882
    ttt.Page_Load(Object sender, EventArgs e) in d:\ViDu01\ttt.aspx.cs:27
    System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
    System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
    System.Web.UI.Control.OnLoad(EventArgs e) +99
    System.Web.UI.Control.LoadRecursive() +50
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
    #Software: Microsoft Internet Information Services 6.0
    #Version: 1.0
    #Date: 2009-06-09 02:43:10
    #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
    2009-06-09 02:43:10 192.168.2.46 GET /_vti_bin/testwebservice.asmx wsdl 80 - 192.168.x.xx - 200 0 0
    2009-06-09 02:43:13 192.168.2.46 POST /_vti_bin/testwebservice.asmx - 80 - 192.168.x.xx Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+2.0.50727.3053) 401 5 0
    2009-06-09 02:43:16 192.168.2.46 GET /_vti_bin/testwebservice.asmx wsdl 80 - 192.168.x.xx - 200 0 0
    2009-06-09 02:43:17 192.168.2.46 POST /_vti_bin/testwebservice.asmx - 80 - 192.168.x.xx Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+2.0.50727.3053) 401 5 0
    2009-06-09 02:44:42 192.168.2.46 POST /_vti_bin/testwebservice.asmx - 80 servername\username 192.168.x.xx Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+2.0.50727.3053) 200 0 0

  • Access Exchange Service From SharePoint 2013 Custom Web part getting The request failed with HTTP status 401: Unauthorized.

    I want to Fill a drop down with Outlook Meeting of Current log-in user in SharePoint 2013 web part for default credentials I am using the following code
     ExchangeServiceBinding binding = new ExchangeServiceBinding();
                ServicePointManager.ServerCertificateValidationCallback = (sender, certificate, chain, sslPolicyErrors) => true;
                binding.RequestServerVersionValue = new RequestServerVersion();
                binding.RequestServerVersionValue.Version = ExchangeVersionType.Exchange2010_SP2;
                binding.PreAuthenticate = true;
                binding.UseDefaultCredentials = true;
                binding.Credentials = CredentialCache.DefaultCredentials ; 
                string server = "https://*********/ews/Exchange.asmx";
                binding.Url = server;
    I Am Getting the Error "The request failed with HTTP status 401: Unauthorized."
    but when I Replace  the line  
    binding.Credentials = CredentialCache.DefaultCredentials ; 
    with 
     binding.Credentials = new NetworkCredential(userName, password, domain);
    Its run fine.  Is there any way I could able to use default credential.
      

    Hi,
    As this question is more relate to Exchange development, I suggest you post it to the corresponding forum, you will get more help and confirmed answers from there.
    http://social.msdn.microsoft.com/Forums/office/en-US/home?category=exchangeserver
    Best regards
    Patrick Liang
    TechNet Community Support

  • Record center - submit file soap call throwing The request failed with http status 401: Unauthorized" exception

    Hi, I am trying to implement custom hold order / send to in sharepoint 2010 to send files in to holds / record center.
    I am at the last step where I am trying submit the metadata using soap call- submit file
    [SoapDocumentMethod("http://schemas.microsoft.com/sharepoint/soap/recordsrepository/SubmitFile", RequestNamespace = "http://schemas.microsoft.com/sharepoint/soap/recordsrepository/", ResponseNamespace = "http://schemas.microsoft.com/sharepoint/soap/recordsrepository/", Use = SoapBindingUse.Literal, ParameterStyle = SoapParameterStyle.Wrapped)]
    public string SubmitFile([XmlElement(DataType = "base64Binary")] byte[] fileToSubmit, [XmlArrayItem(IsNullable = false)] Microsoft.SharePoint.RecordsRepositoryProperty[] properties, string recordRouting, string sourceUrl, string userName)
    return (string)base.Invoke("SubmitFile", new object[] { fileToSubmit, properties, recordRouting, sourceUrl, userName })[0];
    I am getting an error "The request failed with http status 401: Unauthorized".
    Actual file was transferred successfully but while transferring the properties (metadata) I am getting this exception.
    ganesh

    Hi ganesh,
    Please try to disable the loop back check, compare the result:
    In Registry Editor, locate and then click the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
    Right-click Lsa, point to New, and then click DWORD Value.
    Type DisableLoopbackCheck, and then press ENTER.
    Right-click DisableLoopbackCheck, and then click Modify.
    In the Value data box, type 1, and then click OK.
    Quit Registry Editor, and then restart your computer.
    In addition, please check if these links are useful:
    http://www.sharepointpills.com/2011/10/send-sharepoint-2010-document-to.html
    http://www.codeproject.com/Articles/497729/UploadingplusDocumentsplusProgramaticallyplustoplu
    I hope this helps.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • 30k+ Members - 'The request failed with HTTP Status 401: Unauthorized'

    Hello everyone,
    I'm starting a new Netweaver client on v7 SP4 and I'm getting an error when administrating dimensions.  I can add up to 30k members in admin to a dimension and process without a problem, but when I try to go over 30k members, I get the following error:
    'The request failed with HTTP Status 401: Unauthorized'
    It's as if the dimension processing is locking the table on a time-out and not finishing the process.  Thoughts anyone? 
    Also, thoughts in general on the fact that we're probably going to have a dimension with 90k members?
    Thank you,
    Grant

    Well, it turns out that the issue doesn't seem to be a client issue.  I can get up to 60k members to save to the server if I don't have a lot of properties, but if I put in 10-15 properties and fill them out, it seems like my file gets too big to be handled and I get this error.  Maybe there's a timeout occurring?  We've tried this on multiple computers on both v7 Sp4 and v7 Sp6 and are getting the same issue when we get a large dimension file.
    Thanks,
    Grant

  • Event Log The request failed with HTTP status 401: Unauthorized. workstation to server fetch some reports

    The request failed with HTTP status 401: Unauthorized.
       at Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.GetSecureMethods()
       at Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.IsSecureMethod(String methodname)
       at Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
       at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo()
       at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
       at Accounting.Reports.UI.FormReportPreview.LoadReport()
       at Accounting.UI.FormBase.PreLoadReportComponents()
    Please help me with this can't figure out, don't know how to troubleshoot this 5 days working on this error no changes so far, thanks in advance if u can figure it out....

    Hi willjohn520,
    Based on your description, it seems that you are getting the error when you connect to report server reports in workstation. If in this scenario, the issue can be caused by “Host Header”(<foo>) in  a URL that looks like http(s)://<foo>/reports
    is neither the machine name nor the loop back IP address nor the machine's IP address.
    For more details information about this issue, please refer to the following blog:
    http://blogs.msdn.com/b/lukaszp/archive/2008/07/18/reporting-services-http-401-unauthorized-host-headers-require-your-attention.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • " The request failed with HTTP status 401: Unauthorized." assembly webservice

    Hi! 
    I have an assembly that calls a webpage for information to put in a table in SSRS. After struggling with the assembly that have been moved from a 2005 server to a 2012 server i finally got the reports to deploy and i can open them. But in the field where
    the called information i supposed to be i get this error message. 
    How do i solve this problem? 
    Thanks in advance! 
    //A. 

    Hi there,
    Check the IIS logs on the web service server.  Is the web page secured?  What credentials are being passed to the web service?  Turn on the report server trace logs and check them.  
    Some more info here, I find sysinternals.com tools very helpful in this case.
    There are quite a few links with similar issue:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/86ce6376-71cd-44fe-9480-fff103395d6b/web-service-request-failed-with-http-status-401-unauthorized-in-ssrs-2008-r2?forum=sqlreportingservices
    http://forums.iis.net/t/1149741.aspx?Intermittently+getting+401+Access+Denied+with+Web+Service
    http://technet.microsoft.com/en-us/library/ee384252(v=sql.100).aspx
    http://technet.microsoft.com/en-us/library/cc281309.aspx
    http://connect.microsoft.com/SQLServer/feedback/details/323214/the-request-failed-with-http-status-401-unauthorized
    Compare the settings in the Reporting Services configuration files and service accounts for the old and new servers to see any discrepancies.
    cheers,
    Andrew
    Andrew Sears, T4G Limited, http://www.performancepointing.com

Maybe you are looking for

  • Adobe Media Encoder - AMT Subsystem Error

    When trying to open the application, I get this message: "AMT Subsystem Error Thank you for using Adobe Media Encoder CS6. The Adobe product that installed Media Encoder has not activated. Please launch and activate that Adobe product before continui

  • HT201302 How do I import/backup the album structure from iPad to PC?

    I use my iPad to organise photos into albums. The photos are either taken on an ios device or my SLR. I know how to back up the photos as a group to my PC but I can't see a way to back them up in the same folders as I have them stored on my iPad. Any

  • IPad won't talk to wifi keyboard

    My wife has the base [16mb] ipad and it won't recognize a wireless keyboard. The bluetooth option is turned "on". Any suggestions? Message was edited by: Viking43

  • Watermark tool

    What (preferably free) watermark tool (for use with PE 5) do you recommend? Regards, Adriana. [ put out the rubbish if you need to reach me by e-mail ] www.spinsister.nl

  • COPA and SD integration

    Hi, Please, could someone tell me if an user-exit exists to avoid a invoice go to PA??? Thanks!!!