Basic question from a non tech user

how can i upgrade to version 10.4...i have 10.3.9 and i cant use certain online file backup services...so i guess i need to upgrade to version 10.4 as that seems to be th erequired min standard ...do i have to go out and buy a whols new operating system and load it ?...i really dont want to invest a lot more money into this machine...it works fine but i expect to replace it in the next one-two years
eMac Mac OS X (10.3.9)

Welcome To Discussions harpo1004!
Here is some additional information.
Does your Mac meets the Tiger System Requirements?
Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
Once an OS has been installed, the point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.9 (Pending), can be downloaded for free.
Tiger is available for purchase at The Apple Store (U.S.).
If you know what to look for, a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, FastMac, AppleRescue, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Unless purchased from AppleRescue, the discs should look exactly like the images in the above links, and not say Upgrade, or CPU Drop-in DVD, on them.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Additionally, "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
Download the Media Exchange Program Order Form Here.
Orders must be mailed by June 22, 2007.
AppleRescue, also sells a Tiger installation set on CD.
Shop Carefully, Examine All Documentation, And I Wish You Success!
ali b

Similar Messages

Question from a Newbie wireless user

Please excuse the naivete of this question. I'm completely ignorant on everything pertaining to wireless internet. My old Powerbook 400mHz G4 Titanium has never had wireless of any kind until this week when I bought a PCMCIA wireless adapter. Never used wireless, don't know anything about it.
I started following the instructions on the PCM adapter this morning to get it all set up. I plan to toggle back and forth between wired internet at home and the wireless adapter when I'm out on the road.
I was surprised when I saw the window where I enter my settings that there were no less than ten different internet services flying around the room in my house! I guess I have a lot of wireless neighbors and I could easily access their bandwidth.
I imagine the same would go when I'm in town sitting in the library. They welcome you to use their internet access, but it's in a busy end of town and I'm sure I'll see numerous services available there too.
So I'm clueless on this topic. Again, I've never used wireless internet before - but I've read about these guys who've been arrested in front of coffee houses for stealing bandwidth at WiFi hotspots when they weren't paying customers.
What's the deal with sitting in your living room and using your neighbor's internet access? I know it's not ethical and we should all get our own, but what are legalities? And say I hopped on to someone's internet access +quite accidentally+...how does one get caught if you do it quietly? And have people actually gotten into trouble beyond these two guys that made national news?
I guess my main question is exactly how careful do I need to be to set the correct access service when there are ten immediately available in a public place? Can I just click on whatever signal is strongest and log on without fear of being caught?
I hope somebody knowledgeable can set me straight on this.
Thanks.
-JOHN
ps. Here's the news item on these guys stealing wireless internet access:
http://arstechnica.com/tech-policy/news/2007/05/michigan-man-arrested-for-using- cafes-free-wifi-from-his-car.ars

You may find this technical article I've written helps you:
http://homepage.mac.com/rfwilmut/notes/wireless.html
It is fairly long, but it was originally written in response to some questions from a non-technical friend, and so I've tried to keep it as straightforward as possible.

May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

Or you can actived the right button on your magic mouse and click on they icon in the dock. then you select "stop" and it's out of your dock.
Greetings
*update: Sorry, my mistake! I didn't read your message correct! Sorry for the inconvience!

Basic questions from techie thicko with 'new' G4

I've looked but can't find the answers to these basic questions.
My new (reconditioned) computer as below came with just the operating systems and something called 'Cloner' plus some Utilities.
A) What is the best way to switch between OSX and Classic?
(It defaults to X on start-up and I can get to X from Classic by re-starting pressing 'x'. If that's the right way to do it, what is the approved way of getting into Classic?)
B) I'm not sure (after reading about it!) what I can do with Cloner and how.
C) I have AppleWorks on OS9. Can I update this for OSX? Failing this, is there a Software Download that will give me a basic DTP facility until I can afford to buy an advanced programme? I also have Pagemaker 7 in Classic.
D) I have been transferring stuff to Classic from my iMac DV 9.2.2 with my card reader and this seems to work well. Anything to watch out for?
There's more but I can't impose on members' kindness too much!
For future reference, is it possible to post pictures on these boards and if so how please? I have Photoshop and hosting sites.
Sorry to be a pain but I really am an idiot about techie stuff.
Thanks for any help.

I'm not sure what Cloner does. It sounds as if it may clone the hard drive, a bit like Carbon Copy Cloner:
http://www.bombich.com/software/ccc.html
I'm wondering whether it was just used to put the operating systems and utilites onto the drive in the first place when they reconditioned the computer. Perhaps they use a 'master' drive and just clone it to the drives in the computers they're reconditioning, rather than installing everything separately and repeatedly.
I think version 6 of AppleWorks runs under both OS 9 and OS X natively. If you have an earlier version, I'm not sure whether it's a free downloadable upgrade or whether you have to pay for it.
I'm sure the card reader works fine, although you could network the two computers together with an ethernet cable and create a small network. With two computers you just need a crossover cable to create a crossover network:
http://docs.info.apple.com/article.html?artnum=106658
If you're thinking of keeping your iMac, that may be a better long term solution. You could then use the iMac as your OS 9 machine and the PowerMac as your OS X machine if you wanted to.

Basic Questions from Prospective Lion Server Switcher

I have five servers I am running right now using Windows 2003 Server and various 3rd party packages.     Several years ago I became a Mac fan, moved all of my client based stuff to Mac, and now want to start moving my server based equipment to the OSX platform.
I stopped by my local Apple Store, and they had a version of OSX Lion Server running on a MacMini, but couldn't seem to answer the most basic of questions because as their business people stated "We are not Server Certified" ... they recommended I talk to an outside consultant to get these basic questions answered which seems a little extreme.
So I'm hoping the group can help.
(1) I read through most of the Lion Server Advanced Administrative manual.    Lion server appears from the manual to do most of what I need.   However, when I tried doing some of the functions in the manual on the demo Lion Server at the Apple Store, many of the functions I wanted to do did not seemed to either be installed, or their were buttons missing in the Server App.     I do not know if this was a permission level problem, because the account I setup for myself had administrative rights.
(2) In the mail app, it only appeared you could setup one mail domain.    It appeared you could setup virtual domains and users through the user app, but not through the mail domain itself?
(3) I could not find any where to enable DNS services.    The manual seems pretty straight forward in turning on DNS, but the Lion Server I saw had no DNS services running, or any way to enable them?
(4) Same for mailman listserv type function ... manual seems to be straight forward on enabling under the mail server, but again, no signs of the settings or enabling under the mail service.
(5) Under the mail app, didn't find any way to setup alternative SMTP ports ( I allow now Port 26 besides the standard Port 25 and SSL ports for my users.) ... I find port 26 gets past most firewalls at hotels etc.      Didn't see any way to control SMTP authentification too.
(6) Under the Lion Server tech description, it talk about a built in web editor, saw nothing of the kind.
So did the apple store have a limited install or am I missing something that the lion server manual does not match the capabilities of lion server.
Love to get a straight answer before purchasing hardware to replace 5 present machines.
Thank you.
David

Thanks for quick response.   Indeed, in hindsight, it appears that they had only installed the Server App, but not the Server Admin tools.
Unfortunately, I am not a system admin, but I played one on TV <grin>
All kidding aside ... I'm willing to learn, but would need most of the basics controlled through the GUI ... and then feel comfortable reading up and editting configuration files and running commands from the Terminal.
On this line, is there good documentation of this, or is this something that you know because you are familiar with Unix?    ie something like the alternate port issue ... is this something in the GUI, or something I would have to edit via Terminal?
Just trying to make an informed decision before jumping platforms.
Thanks
David

Basic questions from a new mozaic owner

I have some very basic questions about how to use the new mozaic 2G mp3 player. I bought the Mozaic because it has a speaker and sleep timer, but I'm finding it to be much harder to use than other mp3 players that I have had (Ipod shuffle, clix etc). This may reflect my failure to look in the right place but I have to say the "help" section isn't much help.
Here goes:
. I download podcasts to listen to during my morning run. WMP provides an easy to find place in its program, "recently added," which allows the user to just work with those files. As near as I can tell, Creative makes you wade through all of your tracks. Is there some way to create a file to which "recently added" tracks, or specific tracks, can be dumped? How about automatic tagging of these added files?
2. I have several thousand pictures on this hard dri've. Apparently, the Mozaic Centrale
Is going to copy all of them, which strikes me as a waste of space. Is there a way to shut this function off? I couldn't care less if a single photo was added to the centrale program (or whatever it's called). Is it really going to duplicate all of the jpg files?
3. I have the Zen Stone plus speaker which has served me very well. I had similar problems working with whatever Zen was calling its media player and wound up using WMP instead. I"d like to take a run at using the dedicated Zen media player....
I apologize for the basic nature of these questions, but the answers weren't obvious to me from the materials I was able to locate.
gba

sineadholly wrote:
Problem with speaker. I read you need to do a firmware update to get the speaker option on your product's menu so i've completely updated it, but still no option to switch speaker on, and won't just come on when i unplug the headphones, any ideas?
what exactly is the model of your Mozaic? Is it EZ 00, EZ 300 or plane ZEN Mozaic?

A few basic questions from a new user - backups, moving files, sharing

I'm a Mac user considering getting an iPad. I'm hoping someone can clue me in to some basic aspects of the experience:
1) are backups easy? can you "clone" it (the way I do with my desktop and laptop) so that everything (content, settings, preferences, etc.) can be restored exactly in the event something happens to it?
2) how does one move files to it? Specifically, PDFs - I have a ton of PDFs I plan to be reading on this thing. Does it show up as a drive (drag-and-drop) when connected to my desktop machine, or does it work through a special conduit or? Does it have a filesystem we can see?
3) is there any notion of "users" - can multiple people share it and have their own sets of preferencs settings/content?
4) is the iPad 2 date still best estimated as April? I need it for a trip in mid-March and I don't want to buy the 1st model if the second is coming out shortly thereafter. Is there any likelihood of having it be available in the first week of March? If not, is there a good place (on-line) to rent one for a week perhaps?
thanks in advance!
Mike

1, yes they are easy, but they are not a clone. When connected to iTunes on your computer you just tell it to backup. That will backup your notes, settings, app data, but not synced data (i.e. not your music, films or contacts and calendars synced from your computer).
2, via iTunes, not as a drive. PDFs can be dragged into iTunes and then synced to the iPad to go into the (free downloadable) iBooks app. Alternatively you can buy an app like Goodreader which allows you to transfer PDFs wirelessly from your computer (can also be used to read/store PDFs emailed as attachments).
3, no. There is only one set of options. If you have children (or even other adults) then you can set a passcode to restrict access to, for example, Safari, iTunes, or the ability to install and delete other apps. But it's basically a single user setup.
4, speculation as to what Apple may, or may not, be planning is prevented by the terms of use of these forums. All that can be said here is that no new version has been announced, and when/if one is it will be on the apple.com frontpage. You should ask yourself whether the current one meet most, if not all, of your requirements, not whether some unannnounced item might.

A few questions from a prospective GarageBand user...

My sister got a new Mac last year, and I love messing around on garageband, but I had a few questions.
I have only recently started to mess around with the non software instruments (i.e. playing an instrument or singing into the microphone that is built into the computer)...I was wondering, is there any way to hook up a better mic to the computer so that I could get better sound quality??
Also, instead of using the keys on my computer, is there any way I could buy a synthesizer at a place like best buy and hook it up to the computer and play it with Garagebad??? Would I be able to use all the "software" sounds that come with the synthesizer as well as the ones on the computer? Could it hook straight up to the computer, or would I have to use a microphone to get the sound off the synthesizer??
Thanks for the help!!

I need a "controller" keyboard in order to play with garage band
a controller to record MIDI (play GB's instruments), if you want to use GB like a tape recorder you could record the audio from a synth (keyboard) into GB
I can't plug in an electronic drum kit that I physically use drum sticks to hit
if it's a MIDI controller drum kit, than you should be able to do so with a MIDI interface. if not, like above, you could use GB liek a tape recorder and plug an audio out of the kit into the Line-In on hte mac.
playing the guitar on garage band as one of the external instruments, what is the best way to do it??
use an audio interface:
http://www.bulletsandbones.com/GB/GBFAQ.html#interfaces
some people find pugging a guitar directly into the mac, though most do not:
http://www.bulletsandbones.com/GB/GBFAQ.html#pluginguitar
(you can certainly try, it's nearly free, so why not)
Would I have to buy a good external microphone and just put it in front of the amplifier that the guitar is plugged into to get the best sound??
that's the way i do it, and to really capture that amp sound, I think it's best, though it's a little more complicated because you can't really plug a mic into a mac, again you need an interface/preamp

A few simple questions from a new Iphone user

Hi a few simple questions, just got an iphone 2g - 2nd hand so not really sure what to expect. Anyway I guess my first question is about mine sometimes being a little slow - when I look at contacts and sometimes when sending a txt it slows down/freezes a little - normal?
Secondly Edge - I havent used it much but when I have its been painfully slow, is this normal - is it always really slow - cause I had read despite not being 3g Edge was actually pretty fast - what exactly is data roaming by the way? I mean I have been switched off as basically I dont wanna use the internet till next month when they change my contract to one I get unlimited access on - is that right?
Im having a problems syncing videos to it - it just wont sync some but will others and Im not sure why - theyre same file type and they used to sync to my ipod touch but now they wont for some reason
Cheers

I have the origina iPhone.
Downloaded 2.0, synced phone with everything UNchecked. Installed 2.0. Synced with all the options checked to reload my data. The iPhone has been great. Noticed a little lag when I opened contacts. Installed the new upgrade, and everything is back, no lag.
Edge is Edge and nothing more. It is slow compared to a strong 3g signal. But is liveable most of the time. Heavy traffic can slow it down to barely usable.
My four wheel drive club has a web site with a large photo section. I was standing out in the middle of parking lot in San Jose, Ca and showing a friend some photos. It opens up a page of small picts to choose from. Select a print and it enlarges, He was amazed at how fast they appeard. Especially given the quantity of photos.

Some basic questions from a mac newbie

hi,
i have been using linux and windows all this while, and recently began using an apple too. have some simple questions here that i hope to get some answers for.
1. is there something similar to /etc/hosts in linux where i can add the IP address of a server? this is for me to use the 'ssh' command in the terminal
2. when i open up an application, say safari or chrome, i want the window to fill the entire screen automatically, instead of having to drag the bottom right of the window to fill the screen. how to configure that?
3. when i close an application by clicking on the 'x' at the top left, why is it that it still appears in the list when i press command+tab? to remove the application from the list, i have to right click on its icon on the dock, then click 'quit'. this is rather troublesome.
appreciate any help!

1. is there something similar to /etc/hosts in linux where i can add the IP address of a server? this is for me to use the 'ssh' command in the terminal
The /etc/hosts file is there, but the /etc/ folder is hidden. You can use the Terminal (in /Applications/Utilities/) to access it via Unix, or could enter "open /etc" in the Terminal to open that folder in the Finder.
However, I'm not sure how this relates to ssh... I have not needed to modify that file, yet I can ssh all I need to. Are you trying to connect to your new Mac via ssh, or connect to other machines from the Mac via ssh?
2. when i open up an application, say safari or chrome, i want the window to fill the entire screen automatically, instead of having to drag the bottom right of the window to fill the screen. how to configure that?
Just drag the window out to full-screen and the browser should remember and open new windows at that size in the future. There are also some utilities (one called "Right Zoom" IIRC?) that will make the zoom button (green + button) behave more like the Windows zoom button.
3. when i close an application by clicking on the 'x' at the top left, why is it that it still appears in the list when i press command+tab?
Applications shouldn't quit just because you close their last window, unless the application's entire user interface is contained within that window. That is the case with ALL Windows apps, since there's no global menu bar, but only in some Mac apps. This is something that always ticked me off big-time with Windows... there have been times when I carelessly closed a window I didn't need anymore, but wanted to keep using the app, and then had to wait for it to load again. That won't happen on the Mac.
If this bothers you, just use the key combination command-Q to quit apps.

Basic questions from a dummy

hi i have recently installed osx10.4.5. and have some problems any helpw ould be appreciated:
1 - i use entourage for email and contacts: it is extremely slow switching from email to calendar or to address book. any ideas why?
2 - my whole machine seems in creasingly slow, and i seem to have used up 45 of the 60GB on my hard drive. i suspect there is a lot of duplication. i already trashed several 1.5Gb abcksups of my Microsoft user data. any other ideas on how to reduce the amount of useless stuff on my machine and increase its speed. (or are the two related at all?)
3 - i'd like to synch my palm with entourage but invariably hit problems. does anyon e understand how isuync works ? can you piont me to some useful isntructions on how to sync - can i use applemail/address book/ical isntead of entourage?
thanks for any thoguhts on how to make my machine fast and smarter.
peter

Hi, Pete. Welcome to the Discussions.
By the numbers:
1 & 3: For these issues with Entourage, the best place to search or post for help is the Entourage group you can find on the Microsoft Mac Support - Newsgroups page. These are Google Groups with active participation from Entourage users, including a variety of expert users.
I don't mean to send you somewhere else, but I've found numerous answers there for folks with questions related to MS products. Accordingly, it has often proved to be the first, best place to look for answers to questions such as you are asking.
2: See my following FAQs:
- "Freeing Space on your Mac OS X startup disk."
- "Tuning Mac OS X Performance."
- "Problems from insufficient RAM and free hard disk space."
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Time Machine question from an ex Windows user

Simple question that sounds stupid but I just wanted to be sure. I'm new to Mac OS so bear with me on this
Let's say I install a program and I want to be rid of completely or it causes some issues, if I use Time Machine to go back to before I installed it will all of the folders/directories that the program created be gone or will it just pull the icon?

There is another way of using Time Machine that I don't think Camelot has mentioned. He is talking about using the in-system interface to flip back and forth in time and restoring individual files, but what you, metalrocker, originally asked was if you could go back to before you installed your program, and you can.
First, a warning. Doing what I describe below will put your entire computer back the way it was before you installed the program you are having issues with. All documents, files, e-mails (if stored locally) will go back to what they were before. You can still get newer ones from your time machine, though.
Second, the concept: Go find the DVDs that came with your computer. The first one is all you need, also called Mac OS X Install DVD. Put that into your computer. Now shut the computer down. When it starts back up, hold the C key pressed. This will make the computer start from the DVD. Starting up will be noticably slower from the DVD. You will eventually get a few questions about language, and you have to agree to a user license. Stop after that. You do NOT want to reinstall the operating system. Instead, look at the menu on the top of the screen. There should be one item called Utilities. On that menu, there should be an item called "Restore from Time Machine" or something similar. THAT function WILL bring your entire system back the way it was at a selected date and time.
Normally this is only used if you messed something up really bad, or if you had computer problems on one machine so serious that you decided to switch to a new computer, but wanted all the stuff from your old one... from before the troubles began.
Of course, this alternative is serious overkill if all you wanted was to remove a program. Most of the time, I just chuck the App icon out, and possibly take a look into your user Library/Application Support folder, to see if the application put anything in there, and if so, throw that out too.
There IS yet another method - there IS such a thing as uninstalling a program. It is usually not necessary, and rarely recommended, but if anyone wants to hear more about it, and is a little handy with the Terminal, give me a shout.

[SOLVED] Wireshark from a non root user

Hi,
Recently I've tried to install wireshark. I wanted to use it from my everyday user. However I encountered a problem during the installation
Failed to set capabilities on file `/usr/bin/dumpcap' (Operation not supported)
usage: setcap [-q] [-v] (-r|-|<caps>) <filename> [ ... (-r|-|<capsN>) <filenameN> ]
Note <filename> must be a regular (non-symlink) file.
After installation I added my user to wireshark group.
So first thing I did was checking if /usr/bin/dumpcap is not a symlink to something else but it isn't.
Then I went to the wireshark page which gave me this solution:
setcap 'CAP_NET_RAW+eip CAP_NET_ADMIN+eip' /usr/bin/dumpcap
But it gives the same error. I figured out a simple workaround. I gave dumpcap a +s bit.
But I'd like to know if it's secure or is there a better way of doing this?
Last edited by xartii (2012-09-07 11:01:47)

Oh, silly me. I forgot to compile the capabilities support for ext4 in my custom kernel. Topic may be closed.
And also if any mod feels it's in a wrong category it may be transferred.
Thanks,
xartii

Create a 1-click setup for a Remote Desktop session for non-tech users

Hi everyone,
I know how to configure a VPN or use port forwarding for VNC, ARD, etc. and know about iChat's Screen Sharing feature and sites like LogMeIn. But I'm looking for something special here. This is the situation:
• A user calls me for help and I would prefer a Remote Desktop session
• He's usually behind a NAT router which hasn't been set up to allow remote access
• He's absolutely NOT tech savy
So I'd like to have an easy way to allow me to initiate a Remote Desktop session (ARD/VNC) with as little user interaction needed as possible. I don't want to walk him through reconfiguring his router on the phone!
I was thinking of using iChat's Screen Sharing first. But I'd need to create a jabber account, save iChat's preference file, maybe pack it into a little "Installer" and mail it to him. So all he needs to do is double-click it and run iChat afterwards and accept me.
But this is a little too much for my taste and I'm wondering if there isn't already a "best practice" or something like that. Any ideas or suggestions?
Thanks a lot!
Björn

I've recently started using TeamViewer. If you can walk a person through going to http://www.teamviewer.com and clicking on "Start Full Version" and getting them to download it and run it, then you're good to go. It's cross-platform both ways so you can control a Mac from a PC and a PC from a Mac in addition to M-M and P-P. If they're on a PC, the download is an executable which when they double-click it, asks them if they'd like to run it or install it. Just have them run it and in a few seconds they will have an ID number and random password generated that they can tell you over the phone. Then you type it into your TeamViewer app and you're controlling their screen. If they're on a Mac, the download is a disk image so you have them mount it and then just run the app directly from the disk image. Once you're connected you can fully install the app for future use or just help them out. It's pretty much the simplest cross-platform control system I've found to deal with situations where it's not already setup for me to support. On top of all that, it's free for personal use!
Jeff

A Dumb Question From A New CS3 User

I am in the process of building a new site using CS3. This is
my first experience with this product and I have what I am sure is
a remarkably dumb question. I have an image (a banner ad) centered
on one of the pages and would like to insert a table to the left of
the image without the image moving (i.e. down) from it's current
location. How can this be done?
Thanks!

Thanks!
That worked perfectly.
quote:
Originally posted by:
Newsgroup User
Hi Big,
>I am in the process of building a new site using CS3.
This is my first
> experience with this product and I have what I am sure
is a remarkably
> dumb
> question. I have an image (a banner ad) centered on one
of the pages and
> would
> like to insert a table to the left of the image without
the image moving
> (i.e.
> down) from it's current location. How can this be done?
An easy way is to make your table with two cells, then put
the banner in the
right cell - if you need more subdivison of the left cell,
you can put a
table in it.
Aloha,
Jerry

Basic question from a non tech user

Similar Messages

Maybe you are looking for