Batch changes don't function. Apt 3.2. From simple commands like "rotate clockwise" to "lift and stamp" the command only affects to the last image in the group selected. Similar problems? Solutions?

Batch changes don't function. From simple commands like "rotate clockwise" to "lift and stamp" the command only affects to the last image in the group selected. Similar problems? Solutions? Suggestions? Thanks, Bruce

Glad it helped. Everyone has been bitten by this at one time or another. Fortunately you only get bit once
Well if you haven't already read it two or three times the User manual is really very good. Apple really did a nice job with it. The on-line version is nice because it is searchable.
After that the Apple Pro Training Series book Aperture 3 is very useful. Its basically split into three parts. The library, adjustments and sharing. In addition if you get all the way through it you can take the Certification test and become, well certified.
Rwboyer who posts here on and off has a good site and a couple of ebooks that I found useful.
good luck

Similar Messages

  • To batch edit , with our lift and stamp

    is it possible to batch edit all my images with AUTO level, so that each pic will be edited independent RATHER than lift adjustment and Stamp the same adjustment , which will not work cause each pic needs a different level and white balance,,

    I don't want to delete any of the IPTC info.
    I just want to lift Caption from IPTC and leave any other IPTC info untouched in both images (lifted and stamped)
    So the image I'm lifting has a different provider from the one I want to stamp but the should all have the same caption. How can I only lift and stamp the caption?
    thank you

  • Hi. My phone screen broke and I had it replaced from a phone shop. The guy said that while changing the screen and phone was blocked. It is now disabled for like 23,000,000 minutes and I can't restore it cause I dont have all the data sync to my computer.

    Hi. My phone screen broke and I had it replaced from a phone shop. The guy said that while changing the screen and phone was blocked. It is now disabled for like 23,000,000 minutes and I can't restore it cause I dont have all the data sync to my computer. Is there anything I can do or can Apple do something if  I give them the  correct password?

    As you had the iPhone opened by an unauthorised repairer ( Apple do not replace screens on iPhone 4)
    Apple will not provide any service or support
    Take it back to the "phoneShop" and tell them to fix it
    You have no other alternatives
    or try this
    http://support.apple.com/kb/HT1212

  • Hi , i tried to update my i pad few days ago with the ios 6 and after that the ipad is not switching on anymore the screen only gives me a picture of connecting the wire with the labtop i did that hundred times with no response don't know what to do now m

    hi,
    fewq days ago i updated my i pad to ios 6 by connecting it to the labtop , since that time my i pad is dead it doesn't want to switch on anymore the only message i get on the screen is a picture of wire connection with i tunes tried to connecting it hundred times with the labtop but without any response don't know what to do

    If force restarting doesnt work, and your computer cant recognize it, I would suggest bringing it to the genius bar at an apple store so they can run diagnostics. This seems to be the last step, because the issue seems pretty serious.
    Hope this helps!

  • Update to PS CC 2014 all updated ok, opening image in camera raw if I use any sliders/panels it just freezes the raw module. Anyone with similar problem/solution?

    Any solutions/fixes. Photoshop itself it's fully functional apart from the raw opening problem. I did have 8.5rc installed, raw does seem to have updated as I now have PS CC (non 2014 version) fully functional. I have already tried a new download and re install  of 2014 to no avail. Also tried a download of the separate raw module, no fix either.
    Win 8.1 system
    Thanks in advance of any help, was trying to avoid a complete Adobe file wipe.

    Ok, so this is actually a Wacom driver problem( I'm using Intuos 4). If I turn off windows ink in Wacom driver settings then my sliders in camera raw become responsive again, but I lose pressure sensitivity in PS. Just updated Wacom drivers, but no joy. Anybody have a work around/fix?

  • I am trying to activate an older copy of PhotoshopCS. On a chat I was told to download CS2 which I did. It won't open or instal and I don't know what to try next??l. I get a notice that says I only have 14 more days to use the product since I installed it

    Does anyone have any suggestions on how to activate PhotoshopCS that I am trying to install on a my new computer?

    I now have downloaded the .exe file. I now have it and my old copy of Photoshop in my programs. I am assuming I should uninstall the old copy? I thought I was just downloading an update to the old copy but I now have a new icon with a green/blue feather icon. The oldcopy has the rainbowed feather icon. Do you agree that I should uninstall the old copy? Thanks, morganne

  • How can I change the Firefox brand logo to a different image on the about:home page using CSS?

    I would like to insert my own image where the Firefox brand log appears on the about:home page.
    I am already using a custom CSS and cannot override the content of "brandLogo" element. Any experience out there?

    <pre><nowiki>#brandLogo {
    width: 0px !important;
    padding-left: 154px !important;
    background: url("file:///C:/Path%20to%20image/customlogo.png") !important;
    }</nowiki></pre>
    * The padding value must be equal to the width of the new image.
    * If using the Stylish extension, you can embed the image into the style by clicking the Insert button, then choosing Data URI.

  • I'd like to use iBooks author to make a book. Thing is I don't have an iPad (yet) but would still like to make a book and read it on my iPhone 4 but I'm having a hard time doing that. Please advise.

    I exported it and saved a copy to my desktop. It appears as a folder. Then I dragged it to my other books on iTunes. Check. Then when I wanted to sync, that book was not listed. Please help.

    The Performa 6400 has an IDE hard drive, not a SCSI drive.  This means that you can use one of those inexpensive USB-to-IDE adapters that plugs into the drive's data interface and includes a separate power supply.  Because this type of adapter isn't platform-specific, you can buy one from a PC store for about $15.  The USB-to-SCSI adapter that you wish to purchase will likely cost you more than a vintage Mac sold in thrift stores.  An older Mac or Power Mac with an internal SCSI bus and ribbon cable with an extra connector would enable internal connection of the Quadra 950's hard drive.

  • My iphone 4s keeps freezing up. I have restored it as a new phone. Done numerous resets. But it still keeps freezing up when im using apps and trying to text. Its really annoying.

    My iphone 4s keeps freezing up. I have restored it as a new phone. Done numerous resets. But it still keeps freezing up when im using apps and trying to text. Its really annoying.

    Oh OisinC7,
         I'm aslo experiencing similar problem. Tell me your country and what apps make your phone freeze?

  • Batch changing Word docs to Pages

    I've been using Word for years, now converting to Pages. In searching for a way to quickly convert all my documents to Pages, I've read posts here and found only advice for handling things one at a time -- though I may have missed a post. But I have found a possible answer, yet not sure of the consequences, so please advise. If you
    1. Click on a document and click on "more info"
    2. Open with option - select Pages. Just below this line are the words, "Use this application to open all documents like this, and the option button, "Change All..."
    So I pick an unimportant file and do this, and receive the message after pressing "Change All":
    "Are you sure you want to change all your Microsoft Word documents to open with the application 'Pages'? This change will apply to all Microsoft Word documents with type W8BN."
    One, I don't have any clue what documents will be included because of the "W8BN," because this is a designation I've never heard of, don't know how it is assigned. It is very specific to whether the document is all text, or who authored it, or does it literally refer to all current Word documents made with the version of Word I have (Microsoft Word X)?
    Until I know this, and the consequences of pressing "Change All," I won't do this. But if this is a truly simple and non-destructive way to batch change, how wonderful!
    To further complicate matters, I need this question answered for Leopard AND Tiger, as my husband is one and I am on the other....
    Thanks in advance,
    Tonia

    Yvan,
    I have downloaded your ForPages:batchWord2Pages.zip to try and convert a group of Word files to Pages. As the script asks, I have saved it as an application bundle. When I drop a folder (or a group of files) onto the saved application bundle Pages opens but then my system gets stuck in a loop. The computer makes a rapid 'bonging' noise (the sort it makes if you click a button by mistake) and then nothing else will work. I cannot force quit anything or use activity monitor to close any tasks. All I can do is hold the power switch to make the computer switch off.
    I have tried this on both my iMac & Mac Book Pro. Both run 10.5.2 and Pages 3.0.2. The same thing happens on both machines.
    Is there something else I need to set in the script before I save it as an application bundle?
    Thanks for any help you can provide
    Darran West

  • Batch Changing Photo Names and E-mailing them

    Hi
    I batch change my photos names in Iphoto to text (I think it is.) So I can date or name events. However when I e-mail the photos to a friend, he receives them with the original numbers that my digital camera had assigned to them.
    When I look back to my sent mail folder, the photos are how I had re-named them with the batch change.
    I don't get it, can I get some help here as to how I can e-mail photos and have them arrive with their modified names.
    Thanks
    T. Rod

    T. Rod:
    Welcome to the Apple Discussions. You will have to export those photos to a folder on the Desktop with the option to use the Title as the new file name. Then add them to the email. That's the only way to get files with the title as the file name.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Batch Change Question

    When doing Batch Change, I want to use my own custom lists (views). A lot of my normal views are grayed out. Can I create my own views, such as "All Exif" and then batch change the values in any of those fields?

    Hi
    If you make your selection as you suggest then make sure you click the 'Stamp selected images' button on the Lift and Stamp HUD you should find all selected images and not just the highlighted one have the adjustment applied. For some reason, for me at least, just trying to use the stamp tool on a selection results in only the highlighted image having the adjustment applied.
    Hope this helps
    FlatE

  • Userexit or BADI to change service price when create PO reference from PR

    Hi,
    I need userexit or Badi to change the gross price ( ESLL-TBTWR ) when create PO reference from PR.  Currently , when I do this it will recalculate the gross price based on the service master and ignoring whatever the price put in PR.  Could anyone tell me userexit or Badi that would allow me to change the price when i create PO from PR via ME21N.
    Thanks,
    Gilbert

    Hi Gilbert,
    You can try using Function Exit EXIT_SAPLMLSP_030 of Enhancment SRVESLL.
    This Function Exit has ESLL data as changing parameter.
    But this Function Exit is called from a number of transaction. So do put in correct checks (like sy-tcode or sy-ucomm) before substituting any values. If proper checks are not put in then values may be substituted when this function exit is called from other transactions (like tcode "ML81N").
    Hope this will help.
    Regards,
    Abhisek.

  • From iPhoto. I simply took a PDF and saved it to iPhoto as a photo and then sent it as an embedded "photo" that was my document. Since changing to Lion, I cannot do it this way. Help!

    I used to send embedded documents rather than as an attachmentfrom iPhoto. I simply took a PDF and saved it to iPhoto as a photo and then sent it as an embedded "photo" that was my document. Since changing to Lion, I cannot do it this way. Help!

    I found the solution on another post by user rbii:
    You can add this using Automator:
    - Run automator, select File->New, chose Print Plugin
    - From the PDFs part of the library drag "Render PDF Pages as Images" to the workflow on the right, set resolution to 200.
    - From the Photos part of the library drag "Import Files into iPhoto" to the workflow section.
    - Save the workflow
    That should get you back this feature."
    Save the workflow as "Save PDF to iPhoto" and you'll get that option back on the list. Hope this helps!

  • Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

    Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

    Assuming you do not have access to the "original" video/project and the YouTube video is the only copy, there is a method. Try "YouTube Downloader" which is a free software that allows you to download clips from YouTube as .mp4 files. You can then edit with Premiere, and re-encode again for upload to YouTube. Just keep in mind that you are re-compressing the video so there will be some quality loss. The better the quality of the original, the better the copy will hold up.
    Thanks
    Jeff Pulera
    Safe Harbor Computeres

Maybe you are looking for