Batch Classification in Config Material

I have the Config Material with class - 300(variant) in material
Now,
I want to know how can we do batch classifiaction in config material?

Hi Nainesh,
when creating charateristic in CT04 tcode go to "restrictions" tab and there enter "class type" as "300" and when creating material in MM01 tcode in "classification" tab enter the class type there.
if it helps reward me.
regards,
kishore.

Similar Messages

Update Batch Classification for a Material

Hello friends,
I'm facing the following problem : A specific BTCI wich simulates MB01 was calling another program called SAPLCTMS to update Batch classification for a Material, this program (SAPLCTMS ) seems to be not necessary after the support package Level 57 (we just installed SAP4.6C). I didn't find any note on OSS for this...
Now i'm trying to use this BAPI instead of BTCI for the Material batch classification :
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
         EXPORTING
              objectkey          = l_objnum
              objecttable        = 'MCH1'
              classnum           = 'ZGB_TIDCLASS'
              classtype          = '022'
              status             = '1'
              keydate            = sy-datum
         TABLES
              allocvaluesnumnew = t_valuesnum
              allocvaluescharnew = t_valueschar
              allocvaluescurrnew = t_valuescurr
              return             = t_return.
But its not working, it keeps asking for a batch number. I guess i'm not using the right FM ?
Any ideas about this ?
Thank you in advance for your help !
Best Regards.
Edited by: Soufiane FAYSSAL on Jun 18, 2009 11:42 AM

Hello,
I am Ashok Chelikani. I am working on the same Issue.
i am getting following message:
TYPE ID    NUMBER MESSAGE
E       |C1   |003          |Characteristic DIMENSIONSCOLOR not found or not valid
I        |CL   |736          |Assignment was not created
my procedure as follows:
CLEAR: lv_objnum.
lv_objnum = I_MSEG-MATNR.
**Get Object Details
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
objectkey = lv_objnum
objecttable = 'MARA'
classnum = 'Z_RMBCH1'
classtype = '001'
TABLES
allocvaluesnum = lt_alloc_num
allocvalueschar = lt_alloc_char
allocvaluescurr = lt_alloc_curr
return = lt_return.
IF NOT lt_return IS INITIAL.
CLEAR: lv_objnum.
lv_objnum(18) = I_MSEG-MATNR.
lv_objnum+18(10) = I_MSEG-CHARG.
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
objectkey = lV_objnum
objecttable = 'MCH1'
classnum = 'Z_RMBCH1'
classtype = '023'
tables
allocvaluesnumnew = lt_alloc_num
allocvaluescharnew = lt_alloc_char
allocvaluescurrnew = lt_alloc_curr
return = lt_return.
lt_return returing error message. Kindly help me.

How can mass create batch classification for many material batches? ?

Hi Experts,
In our system , there are so many material batches which have not been classified，see by
BMBC Tcode.
That means these batches has no values in the batch class. I know we can create
classification for these batches with MSC2N Tcode.
But there are so many batches which have not been classified,more then 2000.
It is not possible to create classification for every batch with with MSC2N once a time.
So how can I create batch classification for so many batches once a time?
How can I mass create batch classification for so many batches??
Thanks for any reply!

Hi,
Please be aware that SAP does not support the use of batch
input in the classification system. SAP recommends you use BAPI's for
example in your case BAPI BAPI_OBJCL_CREATE and BAPI_OBJCL_CHANGE
would be able to help. For more information, please have a look at the
note: 943559 - Point 2 and 13. Point 13 references the note 1083986.
I hope this helps!.
Best Regards,
Arminda Jack

Automatic batch classification with procedure on goods receipt does not wor

Hi,
I have a material with batch classification.
The material has two characteristics.
One is a number called VALUE.
The other is also a number (called CONVERSION) and shall be deived from the first.
A procedure is created and assigned to the second characteristic.
$SET_DEFAULT ($SELF, CONVERSION , $SELF.VALUE / 6000)
When I post a goods receive (movement Type 501) the characteristics can be filled . The field VALUE is set with 12000.
I was expecting the characteristic CONVERSION to be calculated as '2' and filled by the procedure.
This is not the case.
If however, I try to fill it manually, the system accepts only the calculated value '2'. Otherwise an error is shown.
How can I force the system to calculate and fill the second characteristic when insserting a value in the first ?
Thanks for any help.

Hi Marcus,
i have the same problem with movement type 101.
How did you solve this issue?
Can you help me.
Thank you.
CM

Batch Classification

Assistance please,
I have Batch Determination Strategy created and it works great - once I manually assign Batch Class to each batch record. How can I get the system to automatically add the classification to the batch? Batches are created automatically upon Goods Receipt and I do not have batch status management active.
Your assistance is appreciated.

you have to add the batch classification in your material master classification view.
of course this will not add the batch classification to existing batches, only to batches that are created after

Copy of Material Master charac. values to the batch classif. in GR for PO

Dear gurus,
Could you please help me with the following issue. I have a material managed in batches, and it has a classification type 023 in material master. I fill one chaacteristic of this classification with some value. Now I want this value to be copied to the batch classification during the creation of new batch while making GR to production order.
Is it possible?

Hi Nikolaj,
What I am understand your requirement is like,
You want to fetch the value of Characteristic maintain in Batch class in Material master to the Batches, correct?
But my Friend if you maintain value of characteristic in Batch Class in material master then it will works as a validation.
For Example,
Suppose your Characteristic is Colour and in Material Master Batch classification view you have maintain value as Red.Then system will not allow you any other colour in Batches.You will find that value in Drop Down list.
Regards,
Dhaval

How to Change Batch Classification of material master

Hi,
How to Change Batch Classification of material master in a production system,Pl note that there is no stock and no open qty still system is not allowing me to delete the old Classification and add my new classification.
Guys any solution for this.
Thanks in advance
rgds
bijaya pradhan

I believe there is a FM VB_CHANGE_BATCH for this, any body tried this FM?

Material Batch Classification Update

Hi ,
Is there a Function Module or BAPI to update Material Batch Classification ?
Thanks.

hi,
check tcode bapi. or search function bapiclas
cheers.
...reward if useful.

Different Batch Classification at storage location level

Dear guru ,
I have tested that i can insert different values of batch classification for the same material and the
same batch number but in different plants.
In MSC1N/MSC2N transaction the system allow a insertion at storage location level.
Itu2019s possible to insert different values of batch classification for the same material , same batch number and the same plant but in different storage locations ?
Thanks.

hi,
check in OMCT under which batch level the current system is, if the level is set to be material level or client level, if you make a change to the batch classificaiton, it will reflect in all the plants across the clients.
Batch classification is not maintained at the storage location level.

Is it possible to activate Batch Management for a material without Class?

Dear Experts,
Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
Regards

>
Chandan H N wrote:
> Dear Experts,
>
> Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
>
> Regards
Please check this answered link:
Batch-classification view
If you want classify a batch, then you should have maintained the batch classification in material master which is either class 022 or class 023 (depends on your batch level set in cusotmizing). The material class 001 has no impact on the batch classifcition, it is what it is: a classification for the material.
Edited by: Afshad Irani on Jun 20, 2010 4:40 PM

Purpose of maintaining classification view in material master

Hi gurus
can anyone explain Purpose of maintaining classification view in material master with example
Regards
Vishal...

Hi
One of the reason we maintain classification is for batch management where characteristics like shelf life expiry date is being attached to a class & that class is maintained in material master so whenever transactions takes place it will read from the characteristics value.
the other purpose is with variant configruation, for a configurable material there will be more than one characteristics for ex: in a car it comes with A/C - non a/c, metallic - non metallic, normal steering - power steering all these are mainatained as characteristics & assigned to a class & we use that class in classification for materials.
there is many more advantages & ways of using classification in material master.
Regards
Rang

Need a bapi r fn module to update the batch classification in the bom

hi,
iam working a exit : exit_saplcoml_001.This exit is for material quantity calculation.the materials are currently classified in the material master under the classification tab.Ans due to this the classification becomes cross plant.
To make the material classification plant specific i have decided to maintain the classification in the batch classification of bom.i am finding for a function module r a bapi to update the calculated values in to the batch classification characteristics.please help mi with this.
thanks.

Hi
U can try to use BAPI_MATERIAL_SAVEREPLICA
Max

Copy of Batch characteristics value from material master to Batch

Hi Gurus,
I have maintained some values in the characteristics under batch classification in material master and want to copy the values in batch characteristics during batch creation at process order release.
Can any one help me to achieve this in standard way?
Thanks
Sandip

Hi,
Try to understand the batch classification functionality...In batch classification characteristic values changes from batch to batch...Values should not be maintained in the material master...it does not have any meaning...in the material master we need to assign only the batch class with class type 023 in classification view ...no need to assign the values there....Batch classification means characteristics values differs from batch to batch...
Thanks
Kumar

Copy batch classification in GR (101)

Dear gurus,
Could you please help me with the following issue.
I have a material managed in batches, and it has a classification type 023 in material master.
Now I want the class (with all characteristics) to be copied to the batch classification during the good reciept (MIGO / 101).
How it's possible?
When i go to the batch generated in migo (101) using T-code MSC2N, there is one icone in Classification-tab "Create classification". and i can do it manually. how can we do this automatically in GR (101).
Thanks in advance.

Hi,
Check for that movement type in OMJJ in Entry control tab where there is field called classification batch, check what is defined for that movement type.
Regards
Ravi Shankar.

Updating Batch classification data from MIGO for Purchase order

Hi,
I need to update batch classification data (in MSC3n) from MIGO for purchase order. The logic needed for this is as below,
1) Pass material and batch to MCH1 table to get CUOBJ_BM.
2) Pass CUOBJ_BM to INOB table to get INOB-OBJEK.
3) Pass INOB-OBJEK to CLAF_CLASSIFICATION_OF_OBJECTS to get class name & characteristic name.
4) Pass INOB-OBJEK, CLASS name and characteristic name to BAPI_OBJCL_CHANGE to update batch classification data.
I created implicit enhancement at the bottom of FM "CLVF_VB_INSERT_CLASSIFICATION". But the problem is, the return parameter of BAPI_OBJCL_CHANGE is giving the following error.
Class type 023, object type MCH1, object RAW-6 0000001151
Object is currently locked by user
The assignment was not changed
Please let me know how to do it. Is there any BADI or User Exit?

Hi,
As you said the break point is not triggering did you activate your exit and activated even the project to which your exit is assigned.
I hope you missed activating your project in CMOD transaction. Please verify it once and if it is not activated then immediately activate it and try debugging again.
Regards,
Rafi

Batch Classification in Config Material

Similar Messages

Maybe you are looking for