Batch Enhancing for a group of photos
Hi,
I just took over 100 photos that all need to be enhanced similarly. I was going to use the auto-enhance feature on each one. Is there a way to use this feature on a group of photos other than going through each one individually?
Thanks
Valid concerns.
ben oven1 wrote:
but wont lift and stamp lift the changes done to that photo only and so it will make the same adjustments for every photo to be the "auto enhanced" settings of photo 1, which may not be the best for photo 2?
No. Lift & Stamp of "Exposure→Default Adjustment" from a Version which has been auto-adjusted using the Exposure brick will cause the stamped Version to be auto-adjusted. This is easily tested (auto-adjust, lift, select another Version, stamp, compare the values in the Exposure brick to make sure the stamp is relative not absolute, auto-adjust the stamped Version and see if the Exposure values are changed).
I do not want to auto-enhance on import becasue I want the master RAW files to remain intact so that I can use them for detailed editing in photoshop, but when I am doing samples I want to just use a quick edited version like the auto enhance.
Raw is raw. It is not an image format, it is a data format. What you see in Aperture is an image format file which Aperture creates from your raw files. You should test this as well: import two images (helpful if they are poorly exposed) and auto-enhance them as part of the import. Select them after import and "reset all adjustments". Tell us what you find out.
I am 98% certain that the processing you tell Aperture to do on import is done as a Version of the raw file.
Similar Messages
-
There is a way to use the button enhance for more than one photo at a time?
I have more than a thousand photos to edit, this can help a lot.
This might help:
http://www.feroxsoft.com/ibe/index.php.en
Regards
TD -
Batch enhance photos in iphoto
Is there any way to enhance (exposure, quick fixes, etc) mulitple photos at once in iphoto? I have thousands of pictures that need to be adjusted and don't have time to edit them one by one. I have the latest update on iphoto11 9.4.1
Thanks for any ideas.Check out iPhoto Batch Enhancer
http://www.feroxsoft.com/ibe/index.php.en -
Lightroom 3- How do I batch process a group of photos with the same preset?
Using Lightroom 3/Mac. Attempting to apply a preset to a group of photos. I read the forum already but what I read didn't make sense to me. Sorry. Also wondering if anyone else is plagued by Lightroom's tendency to take over the monitor. Whenever I want to switch to another application, I end up having to "Hide Lightroom" to get it to move. Any thoughts?
Thanks.
Russ
Altadena, CAahreff wrote:
Whenever I want to switch to another application, I end up having to "Hide Lightroom" to get it to move. Any thoughts?
If you are on Windows, you can use this autohotkey script to minimize (#n) and restore (#b) Lightroom (# means win-start key):
=================================
Get unique window identifier of Lightroom's main app window.
Initial motivation: Make sure Lightroom will be the recipient of emitted keystrokes.
So far, for titles, we have:
{Catalog} - Adobe Photoshop Lightroom - {Module}
Lightroom
Lightroom (x%)
###1 Not sure how to handle case if a dialog box is open, plugin or otherwise.
ahk_class is AgWinMainFrame
GetLightroomWindowID()
lr_win_id := 0
Process, Exist, lightroom.exe
lr_pid := ErrorLevel
if lr_pid {
WinGet, id, list, ahk_pid %lr_pid%
} else {
WinGet, id, list,,, Program Manager
Loop, %id%
this_id := id%A_Index%
WinGetClass, this_class, ahk_id %this_id%
WinGetTitle, this_title, ahk_id %this_id%
if (this_class = "AgWinMainFrame") {
; MsgBox Got Lr Frame type
} else {
; MsgBox Class: %this_class% Title: %this_title%
continue
if InStr( this_title, "Lightroom" ) {
if (lr_win_id = 0) {
lr_win_id := this_id
} else { ; redundent
lr_win_id := 0
break
return lr_win_id
#n:: ; minimize from full-screen
id := GetLightroomWindowID()
if id {
WinMinimize ahk_id %id%
} else {
MsgBox Unable to minimize Lightroom window.
return
#b:: ; maximize to full-screen
id := GetLightroomWindowID()
if id {
WinActivate ahk_id %id%
} else {
MsgBox Unable to restore Lightroom window.
return
^tab:: ; Supports Keyword Consolidator (lrplugin).
Send {Shift Up}{Tab}{Shift Down}{Tab}{Shift Up}{End}
return
===============================================
R -
Production order enhancement for batches
We have a scenario where the batch expiration date of the produced material in the Production order = to the earliest expiration date of one of the component batches. Once the batches of the component are allocated in the Production order, we want do a enhancement which calculates the expiration date for the produced material based on the earliest expiration date of the component batches.
This scenario is typical of a pharama industry I would think. Does anybody know if there is a BADI/user exit/function module I can use for this purpose.
thanks a lotFor this you need to have a Z program which calculates the Expiry date of the finished product based on the component materials expiry date.
There will be some specific or Key materials basing on which you calculate the Expiry date of the Finished product.
Maintian a Sort String to such materials like 'K'.
Now get a program developed in such a way that during the population of batch characteristics for finished product when process order release, it should check for these component materials expiry date and take the earliest expiry date and calculate basing on this.
There was a BADI released for this purpose, some time when I was working in my previous project. I will check and let you know.
Till then you can explore on the above said option.
Hope this helps you. -
Is there a way to batch process (basic auto tone) groups of photos in Lightroom?
Is there a way to batch process (basic auto tone) groups of photos in Lightroom?
There are two ways to do this:
1) Create a develop preset and apply it during import of images.
In the Develop Module apply the settings you want to one image and then click on the <+> sign in the Presets panel (on the left side) and save your settings under a descriptive name. In the import dialog on the right side in the panel <Apply during Import> select the preset that you created. It will be applied to all imported photos.
2) In the Develop Module apply your settings to one image then select all the other images you want the same setting applied - but your first image should remain active - to and press <Sync>. A dialog will appear that lets you select the settings you want applied to all images.
WW -
What is the best way to present favorite photos for a group of people
What is the best way to present your favorite photos for a group presentation?? I use iPhoto library. I also have Aperture downloaded on my iMac. Not too familiar with Aperture. It is for a milestone birthday.
I think it's easiest to work from iPhoto. When I had to do a similar presentation for a birthday bash, I loaded the picts from my camera and some from my computer into iPhoto on a relative's MacBook Pro avalable at the site. It did not take a lot of time or trouble.
iPhoto allows fairly easy options for presenting the slide show , including various transitions and putting a sound track underneath.
Regardless of whether the presentation was or wasn't less elegant than what some more expensive software could do, the attendees loved what we did for that bash.
Never used Aperture so I don't know what it can do. You could ask in the Aperature forums here:
Aperture -
Enhancement for Production Order Release and Batch Fixing.
Hi Experts,
I have assigned a enhancement for production order.The user exit is also given in the req as PPCO0001 through which i have to call a Z-Program for Batch fixing using Trans CO01 and release the order before saving once it is assigned to components.
Now my probs is where to start working for the enhancement -is it possible to use any BAPI instead of Batch (BDC) or I can use any BADI instead User Exit.
So if you guys have similar scenario worked on it or have similar example approach to solve it.Please do help.I will reward for all helpful answers.I figured out thr friends !
Thanks,
SriRam -
Hi experts,
I have copied a standard program 'SAPLHRHAP_UI_DOCUMENT_REPORT' and I would like to create a batch in sm36 with this copied program, the problem is , that its a function group type. Does anybody know how to create a batch with a function group or any workaround?
Thanks in advance,
Regards,
MuraiHi,
For example use transaction 'phap_admin', I would like to create a batch with this screen and a variant that I have previously created.
Is there any workaround?
Thanks,
Murai -
Hi All,
In CRM Web UI, there is no multi selection option for product group id f4 help for Custmer event creation or edit screen under “Product” tab=> Product Group ID field.
Web UI Component Details -
UI component : TPMOE
View : TPMOE/ProductEOL
Context: PRODUCT Attribute : -PRODUCT_GRUOP
Click on Product Group ID field then below F4 Help screen appears.
In the product group results list, user can select only one row and Then all the product will be queried for selected product group, transferred to product list tab.
Current technical design for Product Group F4:
a) SE11 Data Dictionary search help “CRM_MKTPL_PGRP1” is used and data is fetched displayed based it( Refer method GET_V_PRODUCT_GROUP of context node class CL_TPMOE_PRODUCTEOL_CN00)
b) In UI, F4 pop up is handled by UI Framework in SAP generic manner so no multi selection is allowed.
c) A round trip event is triggered after selection of row from results which reload view with queried product result based group selected.
Requirement :-
In the product group F4 results list View, user should be able to select multiple row .As SAP GUI has the option of multiple entry selection from search help window with the help of field called MULTISEL.
System should query for products with all selected product group, transferred to product list tab.
Note: - The multi select options works fine for GUI, but for UI standard SAP code ignores this or never is this structure taken into consideration. Standard class to display F4 help on UI is CL_THTMLB_F4HELP.
Can we enforce same behavior like DDIC search help in Web UI too Or suggest how we can achieve this requirement?
Thanks in advance
Regards,
ArjunHello All,
We have achieved this requirement by Custom development and approach followed as -
Define UI object model zprgrp & zprgrpquery and object relationship in table ZCRM_OBJTAB
Query Strcuture : ZCRMST_PRGRP_SEARCH & Result List structure : ZCRMST_PRGRP_RESULT
Created Custom component : ZPRGRP with Search /Result view and with GENIL Class, search logic
Defined custom ComponentUsage “ProductGroup1SearchHelp” for ZPRGRP in Standard Component TPMOE
e. Called F4 application for field product _group with help component usage created in step d.
Regards,
Arjun -
How to generate the batch number for group of records
Hi All,
requirement: i have created one sequence to generate the batch numbers.i have to get the nextval of the sequence for batch number (this column is not part of the table. its dynamic column/alias column) only for every 50000 records of a table.
detail description:
for example, if i have 10 records in a table. And, if i want to generate the batch number for every 2 records, then the output should look like belo.
batch-number qty
1 10
1 20
2 30
2 40
3 50
3 60
4 70
4 80
5 90
5 100
Please help me on this. Please let me know if you need more info.one more update on the above request. this has to be done using SQL query only.
-
Is there a way to rename a group of photos, so they all have a new name, or is the only way to do it, piecemeal, one photo at a time? Thank you.
Select those you want to rename and use the Photos->Batch Change menu option. There you can select Title to text and put in what you want and have them sequentially numbered after the text.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
Looking for enhancement for the price control of purchasr oder
Hi,
I'm Looking for enhancement for the price control of purchasr oder
I need to develop programs to control the price of purchase orders according to some special rules while purchase order is creating, so,
can anybody tell me which enhancement is beeter to adopt?
Thanks and best regards.hi
following are there for purchase order...
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a
LMELA010 Inbound shipping notification: Transfer item data from IDO
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition releas
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery toleranc
MM06E001 User exits for EDI inbound and outbound purchasing documen
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release order
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processin
MMAL0004 ALE purchasing info record distribution: Inbound processin
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
No of Exits: 36
to search for any enhancement you can use the following prog..
report zfinduserexit.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
execute the report and enter the transaction for which u want to find the enhancement and execute. it would show the available enhancements for that tcode.
<b>Please do reward if useful</b>
Regards
Dinesh -
Group change photo description??
Maybe the editing tools improved in this App but the Photo organization certainly did not. I like to add a description to a group of photos i.e. "Yellowstone Park" It only lets you add description to one photo at a time. Without "Events" I have hundreds of Albums. Being able to search descriptions would let me combine some albums. Obviously something that will be added in the future. Just an observation... Apple is spending huge effort to trim down their OS X applications to match the IOS format. Why not upgrade the IOS apps to work like the OS X???
I like to add a description to a group of photos i.e. "Yellowstone Park" It only lets you add description to one photo at a time.
You could try several things:
You can add keywords to several selected photos at once, perhaps in some cases a keyword will suffice instead of a batch assigned description.
If your photos have GPS assigned, all your Yellowstone photos should be in a Moment or Collection of photos taken in Yellowstone National park. Then you can select the photos in he moments.
You could search for the date range, when you have been in Yellowstone with a smart rule.
Or try to batch change using an Apple Script or Automator workflow. I posted a few simple scripts as a user tip:
Photos for Mac: Batch Change the Descriptions
Batch Changes in Photos for Mac: Change the titles to a Given String
Try the scripts first on a small selection of test images, if you want to give it a try. And not without having a backup of your Photos library. -
Setting color codes for more than one photo at a time
Is there any way to set color codes for more than one photo at a time?
Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim
Maybe you are looking for
-
GR/IR account problem with material ledger
Hi, I just found an issue as effect of material ledger implementation. after the material ledger is active, when we post a transaction in foreign currency (invoice receipt), the LC 2 amount of GR/IR account is somehow different from the document amou
-
ITunes message says can't synch file to iPod
I get a message telling me that iTunes won't sync a file to my iPod because my iPod cannot play that format (this is odd, as most of the podcasts I subscribe to I doubt would post a file that is not iPod compatible--this is on my 60gb model). I've se
-
I received an e-mail today that was formatted in HTML, but Mail opened it in a window that was about 1" tall. I looked in vain for a way to expand the window so that I could see more of the e-mail, but couldn't. Any ideas out there?
-
Problem with printing the code
Hi , I m having problems in printing my source code . I use emacs as a text editor. Is there any settings that need to be made before printing . Because when i try to print it didn't print my whole code. And when i try to print it from some where els
-
Transparant area turns white in 8bit png format
Hello Experts, When transperant is set in photoshop then exported to png 24bit then when opened in MS paint(which supporst only 8bit) the transperacy turns white. When transperant is set in illustrator then exported to png 24bit then when opened in p