Batch from quality inspection to unrestricted use.

Hi everybody
Someone can help me with the following problem?
I made a good receipt for order with a movement type 101. We are using the QM module, then with the movement type 101 an inspection lot is generated, consequently the amount entered is place in quality inspection. For any reason the inspection lot was not generated or this was canceled. My problem is that, now the amount entered is in quality inspection and there is not a lot inspection to move the amount from quality inspection to unrestricted use.
I tried use a movement type 102 (transaction MB31) but the system send the message that the movement must be done only with QM transaction. The same message was sent when I tried to cancel the material document (MBST).
Someone know how I can create an inspection lot or how I can move the amount from quality inspection to unrestricted use?
Thanks in advance.

hi carlos
if you create an inspection lot manually you cannot able to post the stock ( since a manual inpsection lot is not stock relevant) better thing is try to figure out why inspection lot is not genereated and solve it
i think if the inspection lot is not generated it will show some message during MIGO itself.try to find the inspection lot using QA32 and specify the material and select Select all inspection lot
regards
thyagarajan

Similar Messages

  • Problem in BAPI for stock posting from quality inspection  to unrestricted usage

    Hi all,
    I am using BAPI_GOODSMVT_CREATE for  stock posting from quality inspection  to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
    GOODSMVT_HEADER:
    PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
    GOODSMVT_CODE:
    GM_CODE:  ‘04’ .
    GOODSMVT_ITEM:
    MATERIAL = MATERIAL NO
    PLANT = PLANTCODE
    STGE_LOC = ‘WIP’
    BATCH = BATCHNO
    MOVE_TYPE   = ‘321’
    ENTRY_QNT = 100
    ENTRY_UOM =  ‘EA’
    ORDERID =  Prd ord no.
    After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
    Kindly help me.

    Hi Naveen,
    Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
    BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
    Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

  • QA11-Quantity pending to be posted from quality status to unrestricted use

    Hi Experts!!
    In usage decision process we can select the "code valuation" as Approved to transfer automatically the total quantity from status quality to unrestricted use. But in our system, a small quantity of the total quantity does not is being transferred. eg: We have the inspection lot with 76 pc... we should select the code valuation "Approved" and save. After this, 74 pc are transferred from quality status to unrestricted use. However, 2 pc are kept in quality status.
    Could you help me with this issue?
    Thanks in advancer for your attention,
    Valdevair

    dear Valdevair
    Got the solution for the same. I think you have activated in selected set for the codes "Consider Long-Term Characteristics for Stock Proposal". This is why the stock is remaining in quality
    QS51 > selected set > code group > codes >  long term inspection >  maintain do not consider
    This will solve the issue
    Please let me know your feedback
    Regards
    gajesh

  • OMJJ - Where I diferentiate "Stock quality inspection" -  "Stock unrestricted use"?

    Good morning, experts!
    I need to know how to set up a move for the input material in quality stock, without having to use the QM or configure the material. We have the standard movement 503 that is received at the stock in quality inspection and the movement 501 that the entry into stock unrestricted use. In what field of transaction OMJJ I make this differentiation?
    I appreciate your help.

    Hi,
    If one you use 501 the stock is sent to Quality inspection, then this could happen because you have checked the Post to Insp. stock indicator in the material master (Purchasinf view).
    Post to Inspection Stock
    Specifies whether the material is subject to quality inspection (without inspection lot processing) and whether a goods receipt is posted to inspection stock. The indicator is copied to purchase order items and goods receipt items as a default value.
    Dependencies
    You can select this indicator, if no stock-relevant inspection type has been selected in the inspection setup, and therefore no stock-relevant inspection lots can be created.
    If you activate a stock-relevant inspection type, the entry in this field is deselected and can no longer be maintained. In this case, a corresponding indicator in the inspection type controls whether goods are posted to inspection stock.
    When you use 501 the stock should be posted as unrestricted stock, then you can move the stock from Unrestrected to Quality Inspection stock using movement type 322 (use t-code MB1B).
    With movement type 321 you can move from  Quality Inspection stock to Unrestricted.
    Kind Regards,
    Mariano

  • Transfer posting stocks from quality inspection to unrestricted, problem

    Hello Guys,
    kindly help me i am having problems doing transfer posting (mb1b) using movement type 321. because in my stock overview (mmbe) thera are stocks in Quality Inspection, i want that to be trasfered in Unrestricted Stock. that's why i execute transfer posting but there is an error occured doing it so. the error is "change the inspection stock of material 1078 in QM only". how could i make this stocks transfer to unrestricted?
    please advise me the correct way to settled this.
    thanks and regards,

    Hello Guys,
    I am very thankful for all of you contributing to this thread of mine hope in some other time you can work it out with me again I already done all this resolutions you have mention and I also know that is all the right wya to solve this issue but i dont see my problem exists on the configuration in material tpye allocation because in our business sample the FERTin standard SAP but with us it is customized name, have different code it was not define in TLtype in material allocation for quality inspection (Q), now i know what to do to call our admin to authorized my config there.
    Thank you so much i will closed this thread now please help me in some of other query next time. hehehehe..
    Regards,

  • Stock posting from quality inspection to Unrestricted

    Hi ,
    User has approved the 1980 qty out of 2160 qty for a inspection lot in the transaction QA11 , now the 180 qty remains in quality inspection .  plesase advise how can we move the 180 qty from QI to unrestricted stock.
    Regards,
    Amara

    Hi,
    Does the inspection lot has been created for the entire qty and only 1980  qty has been moved to unrestricted by QA decission?
    If the lot still exists for remaining qty, do the same thing for the remaining qty and if not with a new lot.
    Regards,

  • Weird Problem in QM stock posting from Quality Stock to Unrestricted

    Hi all,
    Today I hit a weird problem in SAP and struck there for the past 5 hours. The problem is,
    I have a batch managed material, for which QM view is available. 01 inspection type is activated along with the "Post to Inspection Stock indicator" for that material in material master.
    Now I am creating a Purchase order and doing a goods receipt in MIGO. Then it creates a inspection lot of type 01
    for this material and puts the stock in to Quality stock (I checked in MMBE).
    Now as per standard SAP behaviour, if I want to move the stock from Quality to Unrestricted, I can only do it in QA11 trasaction through Inspection stock tab. If I try to do 321 (Quality to Unrestricted) movement in MIGO, the system will send an error message "Change the inspection stock of material XXXXXXX in QM only"
    But in my case, I am not getting this error message, the system is still allowing me to move the stock from Quality to Unrestricted thorugh MIGO using 321 movement. This is not standard and I don't want this.
    This behavior is seen in 04 and 08 inspection lots also (with post to insp stock indicator).
    The aftermath of this problem, if I do a MIGO transfer posting of say 100 PC through 321. The system is correspondingly updating the MMBE transaction by moving this 100 PC from Quality stock to Unrestricted. But if I go to QA11 and check, the QM still shows that 100 PC to be in Quality stock itself, thus creating a mis-match between actual stock situation and the stock situation in QM.
    I already checked and most of the SPRO nodes and I am left clueless. One more thing, Usage Decision is not yet done for the inspection lot and it is just REL status. Also thee are no developments or enhancements in QM module in my project. Only 1 enhancement relating to custom sample label and rest of all the functionality is standard.
    Sorry for the long post. How to correct this? Please help me!
    Thanks in advance,
    Vinodh

    I don't know why this happenned.  Look at the QM view of the material master and see if the "inspection setup" flag on the QM view is clicked on.  That is usually greyed out and is set by having an inspection type activated.  You can't manually set that once an inspection type is added.  But that is the indicator I believe is used to determine if regular stock movements are allowed for QM stocks.
    I would try to first clear all your inspection lots first.
    Then delete all the inspection types from the material.  And I mean actually go in and delete them. 
    Then use QA08 to reactivate the ones you need.
    Then see if this solves the problem.
    FF

  • Transfer of Stock from Quality Insp. to Unrestricted

    Hi SAP-PP/QM Experts,
    I am doing complete inspection with UD for a particular inspection lot but my stock in Quality Inspection is not transfer to Unrestricted Used stock.I also tried Movt.Type 321 thereafter the stock can't moved.Pl.suggest me the usefull solutions.Helpfull solution will be awarded.
    Prashant

    Dear Venkat,
    There is a  tick mark in post to inspection stock indicator thereafter inspection lot tab in qa32 or qa11 is not activated.
    Secondly, this is a stock item.
    Thirdly, No PS module is implemented in my client
    I think the user has posted  the stock through MB1C with Movt.Type 503 into quality stock.At the time of this posting the 05 inspection type is not activated in QM view of Material Master thatswhy system does not created any inspection lot for this.
      After some days,with out stock posting from inspection stock to unrestricted stock,he has activated 05 inspection stock for the first time.
    Pl.suggest any possible solution .
    Prashant

  • Remove stock from Quality Inspection

    Dear All,
    In material master by mistak quality inspection flag was active in packing material with 01 inspection type.
    When we received material it goes for quality inspection after MIGO. So in MMBE it shows in Quality Inspection.
    Now the Plant in which MIGO was prepared has no quality related data maintained.
    We tried to reverese MIGO document but system not allowing to do as srock is in Quality inspection.
    Is there any way to reverse the MIGO or moving stock from quality to unrestricted?
    Thanks in advance,
    Nirav

    Did you identify the original material document and then try MBST transaction to cancel the document?
    When you use the term "reverse" it sound like you are trying to do a 102 against the 101.  You can't reverse the transaction, you have to use MBST to cancel the transaction.
    Otherwise you have to set up enough QM data to process the lot.
    FF

  • QM: How to Move material from quality stock to unrestricted stock

    Hi,
    How to post material stock from quality to unrestricted without using 321.
    Regards,

    Hi,
    if you have quality management active then you have to mainttain quality view in material master along with the inspection lot settings. now this will result in quality lot creation at the time of GRN. then you have to execute QA32 and get the lot. make usage decision and there you will find tab with lot quantity. there you have to give qty in unrestricted and save it.
    if you dont have it then just do the transfer postingeither through MIGO or MB1B with movement type 321. give the mat. plant str loc. qty and save it.
    regards,
    Adwait Bachuwar

  • Transfer material from  quality inspection

    Hi PP and QM Guru,i have confusion in QM..when i use Qa32 for UD..after GR from production..the quantity is 40 pc in inspection...after inspection i sent only 10 pc in unrestricted wit QA32 rest 30 pc in quality inspection.
    ..but when i want to send rest 30 pc with pervious lot..it does not allow to do me...again i try to do manual lot generation..it also does not allow...
    now my material 30 pc is inspection....how i will send  this martial to un restricted
    kindly suggest me
    regards
    Akil

    Hi,
    First goto the tcode ; MD04 and check whther the balance qty is showing in QI, if so take the Lot number and goto Tcode : QVM2 / QA12 and post .
    Try using the QVM2 transaction code and post the balance qty which is showing under Inspection.
    Hope this will help you.
    regards
    radhak mk

  • How to Clear Stock From Quality Inspection

    Dear Sir,
    We have following problem scenario :
    In the Quality View the wrong type of Inspection Type was given and subsequently during MIGO as  the "Quality Inspection" option was selected under Stock Type , so after MIGO stock got posted under Quality Inspection  and no Inspection Lot was created .
    Now we want to clear the Stock from QI to either Un-restricted or any other type , so that material can be cleared and brought to Un-restricted Stock  ultimately .
    We tried to use MB1b with movement type 321 , but it given error as "Change the inspection stock of material CJMC1A0477 in QM only" .
    I request you to kindly guide me as how can the Stock be cleared from QI .
    With Thanks and Regards
    B Mittal

    Hi ALL,
    I'm also facing the same issue. In material master QM view : Q M Procurement activity deactivated and Inspection setup also deactivated.  This is not a proper way to solve the issue anyway i have deactivated, but still i am facing same issue.
    Please anybody can help on this...
    Regards
    Chandru.

  • How to transfer stock from sample usage to  unrestricted use

    Dear  sir
    how to transfer stock from sample usage to  unrestricted use

    I suppose user has accidently posted quantity to sample usage?
    Do you see material document with movement type 333 for this material?
    You can search material document list using MB51 transaction
    or If you know the inspection lot, You can list material documents list from inspection lot.
    If you can find the material document number -->Use MBST transaction to reverse the movement
    If you can not find material document --> use Mb1C transaction use movement type 561.
    In either case stock can not be return to same inspection lot. You can activate another inspection lot using inspection type 05 if needed.
    Hope this helps.

  • Scrapping from Quality Inspection Area

    I am trying to scrap the material from the Quality Inspection area. If i am trying to use 553/551 its not working its asking me to do the process through QM only.
    So i tried to reject the lot in QA12, but unfortunately i am not getting the tab "Inspection Lot Stock" tab to post the material to the scrap. Please guid

    Dear
    check out your original  thread/question and this one both are completely different & confusing !!
    I am trying to scrap the material from the Quality Inspection area. If i am trying to use 553/551 its not working its asking me to do the process through QM only.
    So i tried to reject the lot in QA12, but unfortunately i am not getting the tab "Inspection Lot Stock" tab to post the material to the scrap. Please guid
    Now come back to your new question
    Stock for the material was transferred to Quality Inspection area.
    Now usage decision for inspection lot with origin 08 is Rejected.
    How you have transfered the material to quality.which T code & mvt type you used ?
    As i understand 323 should not create 08 inspection type lot !!

  • Material movement from Quality to Unrestricted

    Dear All
       My problem is that i have given UD for a particular batch and posted the stock from quality inspection to unrestricted use.
    But when i see in the stock overview the quantity still lies in Quality i.e in MMBE
    But when i see in QA33 the stock is available in Unrestricted.
    Kindly give me a solution
    Regards
    Surender

    Dear,
    Use movement 321 to move material from QI to unrestricted and movement 343 from blocked to unrestricted.
    Regards,
    R.Brahmankar

Maybe you are looking for