Batch Input for user defined fields (SRM 4.0)
Hello.
Now in my project,we are developping Batch Input function about PO,CONF in SRM 4.0.
and in this time, we will use over 20 user defined fields.so we have to enter the value to user defined fields by using Batch Input function.
But if we will enter over the 10 value for user defined fields,we have to scroll the screen.
How do I scroll in SRM?(What's the command to scroll in SRM)
Regards
Ogiwara
better lock the user since he may some business documnt open and you can not proceed further.
br
muthu
Similar Messages
-
Badi: for user defined fields in Budget Entry Document
HI,
I am implmenting BADI for user defined field in budget entry document definatin name 'FMBW_CUSTOMER' . I have created two fields in include 'CI_FMBH' and also created a sub screen and assign this subscreen to badi. I have called get data and put data methods in PBO and PAI. like this.
<b>
PBO
create object grid1.
CALL METHOD grid1->if_ex_fmbw_customer~get_data_from_screen
importing doc_header = doc_header.</b>
<b>PAI
CALL METHOD grid1->if_ex_fmbw_customer~put_data_to_screen
EXPORTING
doc_header = doc_header
processing_mode = 'CRE'.</b>
But the system is not saving these fields in database.
What could be the problem .Hi, did you have any advance on this issue?
-
Error: property is not set correctly for User Defined Fields.
Hi Gurus,
I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
Thanks,
satHi Kevin,
I couldnt get it done. This is what I had done so far.
Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
Added two field in xlwebadmin.properties & xlwebadmin_en.properties
lookupfield.header.users.deptcode=Department code
lookupfield.header.users.deptname=Department name
In my lookfield properties in
column caption=Department code,Department name
Column query= Not sure what to give? here
Thanks,
sat -
Assigning of g/l account for user defined field
IN the sales invoice i am creating the user difined field
for manual tax( i.e manual tax the customer how much tax amount he will give that much amount he will feed in that field )in the row level and i want to assign the g/l account for that user defined field
please explian what is the procedure
Edited by: Philip Eller on May 23, 2008 10:11 AMHi,
Do you want the G/L account input automatically or manually ? if manually try to use this query FMS:
SELECT T0.[AcctCode], T0.[AcctName] FROM OACT T0
In the UDF, just press shift+F2 and select the account code you want to input.
Rgds, -
DMS :Select Range for User defined fields in Classification Tab in CV04N
Dear All,
We have added User Define Fields Date field in Classification Tab in CV04N Transaction But it has single search (parameter) where we need to have Date range selection (Like Select Option) for the documents.
I request you to suggest me some solution whether it is possible to achieve with any standard configuration as it is very critical to the Business .
I would appreciate for your quick response and support.
Thanks in Advance,
Regards,
Vishal.Dear Ravindra,
Actually My requirement is when we enter the exact date in the input field its giving the documents submitted on that date.But when i give date range its not displaying the any documents where the document submited in between those two dates.
Ex: I have submitted the document ( in CV01N ) for the approval on 10.05.2010(this is the same field in classification).
In the CV04N transaction ,classification tab if I enter date as 10.05.2010 its giving the document submitted on that date.but if I enter the two dates 01.05.2010 and 20.05.2010 where document is been created B/W the input dates.
Please suggest how to fulfill my business requirement ,I also request to check any configuration for the user defined fields can solve this problem instead of selecting single value when it can select the range of values.
Thanks for your earlier reply.
Regards,
Vishal. -
Drop box for User defined field
Hi,
I need to add some customer field with PO basic data .
I have added in PO basic data as per 672960 .
Can anybody let me know how can I place Drop box to this field .
Thanks,
SSHi
<u>As everybody told earlier, you first need to create Data Element using SE11 Transaction.
Then a new custom domain element using same SE11 Transaction.
For this domain, you need to maintain fixed values under the value range tab
say you maintain 2 values
X -> Selected
' ' -> Not selected
Then the user-defined in the shopping cart will provide you drop-down list and will not allow you manaully enter anything else than the fixed range values maintained at the domain level.</u>
Hope this will help.
Please reward suitable points.
Regards
- Atul -
Documentation for user defined field
Hai gurus,
parameters : x type i.
i want create documentation for this field x in selection screen.
please replay meHello Ankal ,
parameters: p_docu type zdoc.
create a Data element ZDOC follow normal procedure to ceate a Data element .
when u press create -> it asks for domain and other attributes , in the same screen , click
DOCUMENTATION ( CTRL F7 ) --> editor opens , type the description or the document you want and then activate it .
then go to report and execute it , on selection screen you get p_docu and one input field ,
in that press F1 and you will get the documentation that you mentioned for that Data Element.
Regards,
Aby.
Please clsoe this thread as soon as your problem is solved. -
QE71 -F4 Values for user defined fields in inspection points
Hi,
I have used QAPP_CUST_IP_F4 function module to list F4 values in Inspection points and QAPP_CUST_IP_CHECK for validation of those user fields.
When configured for an inspection point, these modules are working fine when we use in QA32 and QE51n. But when we use QE71, the FM's does not getting called.
Is there any configuration needed to make them work in QE71?
Regards,
SriramSame kind of issue we have faced in one of my implementation ie when we used to do the RR through QA32 system allows us to show the F4 which is assigned for that inspection point. But same F4 help was not working during rr through QE71.
For this issue we haven't applied any note by debugging in QE71 fixing call function he done some changes in the assigned FM
after that its appered in QE71 100% it will flow in QE71 also without NOTE.
Check with abaper
Link: QE71 - verifiying user fields and providing lists of values -
How to change the text of a user defined field in dynamic selections?
Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
Found an OSS note - 86980 - that tells that this is not possible.
But when we read the documentation on the user field (CJI3 - dynamic selections - double click on user field - F1), it shows the following text:
User-defined field in which you can enter general information with a length of up to 20 characters.
Dependencies
The names (key words) for user-defined fields depend on the field key.
Now the question is where to change the field key..
Thanks,
VenMadhu - you did not get the question I think.
Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
Thanks, -
Assign category of user defined field to different user
hi to all on forum,
please help me to find the solution of this query
i had created several UDF and set them in different category as setting is there for user defined field. now i am getting different different user defined field in different category ,
now i want to set this different category of user defined field to different user .can we do it in SAP B1
like category---- general , cat1, cat2,
user --- Ram , Vipul
i want to assign cat 1 to ram and and cat 2 to Vipul so that with the document ram will see only UDF of cat1 and Vipul will see UDF of Cat 2.
hope for response
with best regards
vikasVikas,
You can do it for each user by assigning a category
to each of user defined field by setting visible tick mark.
Tools>User Defined Fields>Settings
Jeyakanthan -
Standard report for User defined feild in order operation
Hi all,
do we have any standard report? for User defined field in order operation. actually we have User defined field in task list and same could be reflected in order operation. so i am using those user defied field to record extra info in maintenance order. i am wondering how to get the reports . do we have any standard reports?
thanks
Amit kushwahaDear Amit
I have utilised 3 user fields & activated order enhancement tab. I could find these three fields in report IW37N & IW49N. I m using ECC 6.0 EHP4. Try to set the layout & look for fields - user field for quantity in the layout. For this please maintain some data in these user fields of some orders and then check for those orders in t code- IW37N & IW49n.
Shakti -
User Defined fields in F.12
Hi Gurus,
I want to add Material and region for the user defined fields in report F.12
Kindly suggets me how to add user defined fields in report F.12.
Thanks in advance.
Regards,
AbhinandanI am in SAP FI/CO.
I want define the fields called user defined in the report F.12.
This you can find in the defination of user defined layout for the report.
I want to add some more fields for user defined fields in the layout.
Thanks for your interest in my query.
Regards,
Abhinanda, -
User defined fields in Routing
Hi to all,
this is regarding user defined fields,
I want to enter Tear down time, But already 6 values are there.
so i created Tear down as user defined field. and i assigned Tear down formula also. (sap_14*operative qty/Base qty),
sap_14 is the user defined field.
but there is no change in tear down time in Production order operation details.
Please Give details to link user defined fields to formulasHi
You can assign additional formula parameters to the quantity fields in the field key in IMG, with the help of formula parameters you can use the value of the quantity fields in work center formulas.
In formula parameters for work center (OP17) you should have select origin as '4' user defined field from operation for user defined field
Regards
Dev -
Validating User Defined Fields on the OIM User Object
Hello everyone,
I'm currently using the OIM 11g, and am curious how to provide data validation for user defined fields.
We currently have two user-defined fields for day of birth and month of birth, which have been set to required, but I would like to take this a step further and actually validate that the data being entered is numerical (two characters max), and if it's not, a red box appears around the field notifying the admin that the entry needs to fit the expected criteria.
One example already in OIM is that of the email field. It appears to be using a regex to identify that data entered is of a certain format.
Can anyone here point me in the direction of some proper documentation so that I may learn how to incorporate this into my environment? Thanks!Hi Kate,
The only way to do it, is with Form Settings. Do not give them authorisations on Form Settings. You can then untick the "Active" tick box on certain fields and tick it on others. This can then be done, when you log on as the user him/herself.
Regards
Carin -
SRM User defined fields -- can not input values
Hi,
We are using SRM 4.0. I have created a user defined field at the PO header according to note 672960. But I can not input anything to this field.
This is what I did:
1. in both structures INCL_EEW_PD_HEADER_CSF and INCL_EEW_PD_HEADER_CSF_PO add the append structure with the new field ZZCONTRACT.
2. in BADI BBP_CUF_BADI_2 created an implementation Z_BBP_CUF_BADI_2. In method MODIFY_SCREEN set: xdisplay = 'X' and xinput = 'X' for this new field.
This new field showed up in SRM, but it is greyed out. I can not type in anything. Could anyone tell me what I did wrong or what I have missing? Thanks a lot!hi,
If you can see the custom fields,the problem is with the BADi implementation.You can write something like this in the method for the PO cust fields:
IF iv_doc_type = 'BUS2201'.
*Hide all customer fields
*Will change this coding if any other document type needs
*customer fields
LOOP AT et_fields INTO wa_et_fields.
wa_et_fields-xdisplay = 'X'.
MODIFY et_fields FROM wa_et_fields.
ENDLOOP.
ENDIF.
Save and activate the implementation.
HTH.
BR,
Disha.
Pls reward points for useful answers.
Maybe you are looking for
-
Open Items in GR/IR Account Internal Order wise
Hi, Is it possible to view Open Items in GR/IR Account Internal Order wise?. We are assigning Internal Order in Goods Receipt and want to view Open items for the particular Order. Regards, Amanullah
-
Encore DVD Error Message - "End of Stream has been reached"
I have created a project In Encore 2. it has motion menus, subtitles and sound. When we go to preview the project it gives us this error "End of Stream has been reached" We have checked our assets and the audio and video are DVD standard. We did a ch
-
HP Laserjet Pro M1217nfw, support for ePrint Home&Biz on Android devices
Got my new LaserJet Pro M1217nfw installed on my home (secure)wireless network and am printing wirelessly from 3 windows laptops. Started trying to get my smartphones to connect and print to it. Droid X Verizon, running gingerbread latest Verizon upd
-
Odbc driver for Excel to Excel?
Hi I am looking for an ODBC diver for excel to enable MS Query of Excel files from within, Excel. I have an ODBC Manager app from openlink, but need a driver fro Excel it seems (I have struggled with this problem for probably a decade, no one seems t
-
Problem sync photos from Photoshop Elements since iTunes 7
I have been having problems syncing my photos ever since Apple launched iTunes 7 and iOS 6. I run Windows 7, I sync my photos from Photoshop Elements to the iPad 2 and the iPhone 3GS. I never had problems with the sync prior to the September changes