Batch input with customer fields

I have to create a batch input process that post documents through FB01L.
As the lines of each document have been added customer fields, when I tried to go from one line of the document to the following one, a screen appears when I have to introduce some data (two of the fields are mandatory). I had solved these issue by ending with a "Call Transaction" with option "No batch input" = 'X'. This way, these customer fields appear directly in the screen, and not in a popup screen, so the batch input process was very easy.
But, I have been told that I don't have to use "Call transacion", I have to create a session, and the user will post the document by launching it in SM35. This way, even adding "No batch input" = 'X' in the options of "BDC_INSERT", the popup screen appears when running the session.
So, is there any way of running the session in SM35 with the option "No batch input"? If it's not possible, which is the best option of dealing with these popup screens? I have been able to go from one dynpro to another, and to open that popup screen, but I can't fill the mandatory fields.
I hope you understand my problem, please excuse my English.

Hi ,
Go to the T code Mass , put the object as KNA1 for customers .
Execute the same and you will find all the option available for making mass changes .
In case if your requirement does not meet here then you will have to go for a LSMW .
Regards ,
Dewang T

Similar Messages

Batch input with objects

Hi,
Exists a standard class to develop a batch input????
Any ideas???
Is it possible to create a batch input with objects??

Hi there
Why not
just define your class in the normal way
decide what variables you need to pass
in the methods of your class call the fm modules bdc open, bdc dynpro etc etc.
Incidently the following include will have a decent amount of code for the BDC bits.
include bdcrecx1.
A good way is to start sm35 to record what you are doing on the screen. When you've finished go to your recording in SM35 and click on CREATE PROGRAM - it will create most of the code for you including the screen fields -- you'll need to edit a bit of course as you don't need everything that will be shown.
Debugging in the CREATE PROGRAM might show you a decent generic way of generating BDC's which you could easily do via a class.
Note however using BDC's is the LEAST PREFRERRED WAY of performing work and should only be used as a LAST RESORT if there really is no other way. A lot of new BAPI's and Classes are now available which can do away with the need for BDC's in most cases.
job done.
cheers
jimbo

How to Generate sales orders with custom Fields using BAPI_BUSPROCESSND_CREATEMULTI

Hi,
I need to generate sales orders with custom fields on table CRMD_ORDERADM_H using BAPI_BUSPROCESSND_CREATEMULTI, after changing the structure BAPI_TE_CRMD_ORDERADM_H, and feed the EXTENSIONIN table of the BAPI with data, the order is created, but any value on custom fields.
After debuging, I saw that the BAPI search for structure conversion in table CRMC_OBJECTS_GEN, but we haven't entry with BAPI_TE_CRMD_ORDERADM_H in this table. is that the problem ?, Is there any way to fix it?
Best Regards,
Salah.

That depends on where do you have the customer fields, check the table CRMD_CUSTOMER_H, if your custom fields are there, you need to use the changing parameter CUSTOMER_HEAD, I guess your already checked that one, right? but there's no custom fields, well...AET/EEWB doesn't enhance the strcuture of the BAPI, so you should do it manually, check the note following note for further details.
988410 - FAQ: User-defined fields in the BAPI
If you don't have access to the SAP Marketplace, in resume you should create an append on the structure BAPIBUS20001_CUSTOMER_H and include the following strcutrue CI_EEW_CUSTOMER_H
Cheers!
Luis

Extending the Search Object of a BOL Entity with custom fields

Hi All,
I have to enhance the structure of the BOL search object 'BuilHeaderSearch' with custom fields!.
i went to the transaction genil_bol_browser and find out the structure of the object as, 'CRMST_HEADER_SEARCH_BUIL'
how can i insert custom fields into this structure, so that i can display these custom fields at the Front end ( Web IC ).
Thanks in advance,
sudeep v d.

Hi Sudeep!
First of all it should be mentioned that: it is NOT possible to change list of SEARCH criteria in IC!
So, in other words, you can search BP ONLY by params listed in native structure 'CRMST_HEADER_SEARCH_BUIL'.
BUT: You can FILTER search results!
For example: you get the list of BP with MC_NAME1 (lastname) search criteria (only by SAP class!)and THEN you can filter (delete from list) by YOUR criteria (in your class!).
Is it clear?
So how to add your own criteria?
1. Transaction GENIL_MODEL_BROWSER - Model Browser forGen.IL Applications
2. Component Set - ALL
3. Search Objects -> BuilHeaderSearch -> Attribute Structure ->CRMST_HEADER_SEARCH_BUIL (Dbl Click)
4. Append Structure (or F5)
5. Name the new sub-structure and provide all new fields
So now you can use this new fields in IC Z-classes.
I had the same task and nobody in SDN could help - so I had bought new SAP_book: <a href="http://www.sappress.com/product.cfm?account=&product=H1909">mySAP CRM Interaction Center</a> because in Contents there were:
"Extending the Business Partner Search in IC WebClient by New Search Fields".
So in fact it is not truth: it is not possible to extend search. You can only filter results!
BUT!
It is not the end of my post! I hope that SAP people will see this post. I found a BUG in SAP classes and methods: it is not possible to navigate to first position in collection wraper!
exactly:
lr_current ?= entity_col->if_bol_bo_col~get_first( ).
doesn't work.
So position of cursor puts on second record in structure!
In other words it is not possible to filter the first record in search result! And so new search is not efficient
I think that is is bug and wait for comments of SAP.
Reward points if it helps.
Regards,
Alexander

Use of FM BAPI_EQUI_CHANGE to update equipement with customer fields

Hello all
I have extended the EQUI table with customer fields using customer include structure and append structure.
I want to populate these customer fields with BAPI BAPI_EQUI_CHANGE Or BAPI_EQUI_CREATE.
So I have extended the structure ITOB appending the same customer fields as in table EQUI.
I have enhanced the function MAPXI_BAPI_ITOB_TO_ITOB which map data from structure BAPI_ITOB to internal structure ITOB.
But the fields are not populated ?
Has someone already the BAPI in that way ?
Thanks
Jerome

Hello all
I have extended the EQUI table with customer fields using customer include structure and append structure.
I want to populate these customer fields with BAPI BAPI_EQUI_CHANGE Or BAPI_EQUI_CREATE.
So I have extended the structure ITOB appending the same customer fields as in table EQUI.
I have enhanced the function MAPXI_BAPI_ITOB_TO_ITOB which map data from structure BAPI_ITOB to internal structure ITOB.
But the fields are not populated ?
Has someone already the BAPI in that way ?
Thanks
Jerome

Site Definition with Custom List Intance with Custom fields

How to create VS 2012 > Site Definition with Custom List Instance with Custom fields?
<site>
<list>
<field>

Hi Sunil,
it is the same way we create in VS 2010.
Add a new empty SP project in VS2012 and then add, site, list and fields as per your requirement.
Here are few references-
Creating SharePoint 2010 Site Definitions in Visual Studio 2010
http://msdn.microsoft.com/en-us/library/gg276356(v=office.14).aspx
Creating SharePoint 2010 List Definitions in Visual Studio 2010
http://msdn.microsoft.com/en-us/library/gg276355(v=office.14).aspx
Walkthrough: Create a Basic Site Definition Project
http://msdn.microsoft.com/en-us/library/ee231583.aspx
and I normally create a blank site with all required configuration and then create, import the template to hand craft the list and fields. this would minimize errors.
see the below blog on this topic
http://blogs.msdn.com/b/sambetts/archive/2013/10/17/creating-a-clean-visual-studio-solution-from-a-sharepoint-2013-site-template.aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if the reply helps you

Enhance search functiponality with custom fields

Hi Experts,
I want to enhance component PRD01QR/Search with custom field in order to allow seraching for it. It is enhanced via set type. Please could you send me steps how to dpo it?
Thanks,
Juraj

Hello,
Maybe this helps:
http://scn.sap.com/thread/3151887
Best regards,
Thomas Wagner

AFABN - RAPOST2000 - depreciation posting granularity with customer field

Hi,
My Client implemented a "ZABC" customer field in the new GL accounting (via FI new GL / ledgers / customer field).
This ZABC field is maintained in the asset masterdata.
During monthly depreciation run (AFABN) we would like to have postings done at GL account/ Cost Center / ZABC level in order to have depreciation postings sort by ZABC values in a dedicated financial reporting.
ZABC field is not a cost object, so no entry can be maintained in IMG "Account assignment Elements for AA"
We checked oss Note 1131960 (Documentation: Business Add-Ins for new deprec. calculation) to get explanation for
Business Add-Ins FAA_DC_CUSTOMER and FAA_EE_CUSTOMER.
These 2 BAPI give options for segmentation or new way for depreciation calculation, however, our client requirement is to change only the depreciation posting granularity (GL account/ Cost Center / ZABC) instead of GL account/ Cost Centers
How did you answer similar requests using New GL customer field ?
Thanks,
Arnaud

Hi,
I think you need to create Z-include in ABAP so that depreciation docs are also posted with these custom fields.
From 4.7 onwards, the depreciation program is RAPOST2000. In RAPOST2000, there is no longer batch input. It post directly to GL.
For the difference between RABUCH00 and RAPOST2000, please refer to SAP Note 683313.
Thanks
Aravind

Batch Input with transaction ME58

Hello SAP:
We are trying to do a Batch Input Session with transaction ME58
(Creating Service Entry Sheets) by using a FrameWork Order.
After the batch input selects the purchase order and mark all
the requisitions related with that order and confirms the selection,
the system calls program SAPLMLSR dynpro 400, where the tab "Basic
Data" appears and the error "Make an entry in all required fields"
(00 055) is displayed. Althought we had put all the obligatory
fields required by the Batch Input in that particular
screen SAPLMLSR - 400 (we also tried with subscreen 410), the fields
indicated in the Batch Input were lost.
It seems the flow control of the Batch Input is lost because of the
error message 00 055.
Thank You - And we will be waiting for Your answer.
Frinee Paredes

Hi Christian!!
The error that is displayed is because of a mandatory field, the problem is that it appears before the screen is displayed, I mean the validation occurs before I can input data.
It's very interesting what you said about enjoy transactions and there might be the problem, a few minutes ago, while debugging transaction ME58, I found that it calls function module MS_SERVICE_ENTRY2, which calls transaction ML81N, which I think is an enjoy sap transaction, I guess I'm in a big trouble because I've already looked for a BAPI and it seems there aren't any.
If you like to reproduce the error you could record transaction ME58 with transaction SHDB,you would need a framework order (FO) for the selection screen and purchase requisitions (PO) created asociated to that FO.
What I want to do with ME58 is to run a job periodically which creates service entry sheets with the FO and PR as input.
Thank you very much!!
Frinee

How to enhance the standard search with custom field?

Hi all,
I would like to know the general optimal procedure to enhance the standard searches like Opportunity search or Lead search.
I've gone through some of the threads here. Some suggest, to add the new field using AET and copy the IMPL class of the search and then code the custom logic. Some say, append the new field to the structure of the search object and then implement the BADI.
I'm actually a bit confused to understand the correct procedure.
Can someone please help me with a generic procedure to enhance the standard search with a custom field?
Thanks in advance.

Hi Maren,
Once I have got the same development. I have followed the below steps, please check with this. Let me know for further inputs.
Add new field using Append structure of type ‘XXX’ in search
Create BADI implementation for Enhancement spot ‘ES_CRM_RF_Q1O_SEARCH’ and include filter ‘BTQOPP’
Put your logic in BADI implementation – SEARCH method
Add it in WebUI configuration
Remove the operator if required
Regards,
Swadini Sujanaranjan

Batch Input - Fill hidden fields

Hello to all,
I've got a selection screen with 2 fields like:
SELECT-OPTIONS s_docnum FOR edidc-docnum NO INTERVALS.
PARAMETERS p_wfst TYPE c NO-DISPLAY.
The parameter p_wfst isn't displayed on the selection screen.
Now I want to call this screen via
CALL TRANSACTION 'ZPROGRAM' USING lt_bdcdata .
but I get an error:
field P_WFST is not found on dynpro ZPROGRAM 0100
How can I fill this hidden field?
Regards Christian

You cannot pass a parameter that is not input-enabled by batch-input, you must look for an other soluition.
Some proposals :
- Use a SUBMIT of your Z-program (if there are only data for first screen in the Batch Input data)
- Change the called program to look for the hidden parameter in memory (Use a IMPORT from memory or a GET PARAMETER in the INITIALIZATION block, and an EXPORT or SET PARAMETER in the calling program.)
Regards,
Raymond

Zfield is not apearing in the batch input session ( Customer Master Record)

Hello,
We have added one Z field in the customer master record (sales are tab). But this Z table not appear in the Batch Input session(SM35). My user want to update this field for all the customers at once, but this Z field not appearing even in MASS transaction.
For your information, we have appended the KNVV table. Can any one of you give some suggestions on this.
Regards,
Srinivas.

It's rather easy via a custom ABAP program to wait for the end of a batch input session. Some codes were already pubilshed (look whole SCN for APQI-QSTATE).
What you can do is to select the sessions to be started via this custom program, and it will submit a job which will run in an endless loop until the last session is released. It might use a WAIT UP TO X SECONDS to sleep for a few seconds between each scan of session status.

Problems with custom fields

HI all,
I've worked in several projects with SRM 7.0 and when I add custom fields to SC, PO... I do always the same steps and works fine. But in my new project is not working, the fields are not displayed in portal and I don't know why.
The step I've followed are:
SPRO:
SAP Supplier Relationship Management -> SRM Server -> Cross-Application Basic Settings -> Extensions and Field Control (Personalization) :
- Configure Customer Fields -> Define Customer Fields on Item Level:
I've added the fields in the structures: INCL_EEW_PD_ITEM_CSF and INCL_EEW_PD_ITEM_CSF_SC.
- Configure Field Control -> Configure Control for Fields on Item Level -> Metadata for Fields on Item Level:
I've added my fields there, with the correct Obj. type and I've checked Enabled and Visible. (I haven't dynamic classes)
With this the fields must appear in portal, but aren't displayed...
It's strange because I've even added one of these fields manually in the component /SAPSRM/WDC_DODC_SC_I_BD, adding a label and an input field, and I can see it in the layout but not in portal...
I've tried also to add some entries in SPRO in "Configure Generic Field Display on User Interface" but still not working...
I've checked also the component configuration and it seems it's all ok.
Any idea what's happens ?
Thanks in advance.

Hi Ricardo.
I got the same issue as you described. I try to add a custom field to SOCO in SRM 7.0.
I followed your instructions as below and those are done:
"Configure Customer Fields -> Define Customer Fields on Item Level:
I've added the fields in the structures: INCL_EEW_PD_ITEM_CSF and INCL_EEW_PD_ITEM_CSF_SC.
- Configure Field Control -> Configure Control for Fields on Item Level -> Metadata for Fields on Item Level:
I've added my fields there, with the correct Obj. type and I've checked Enabled and Visible. (I haven't dynamic classes)
With this the fields must appear in portal, but aren't displayed..."
The issue starts from here:
"With this the fields must appear in portal, but aren't displayed..."
How did you solve the problem , what was the customizing issue of you?

Creating a new project with custom fields using web services

I've been trying unsuccessfully for the last week or so to successfully create a new project from web services and I believe the main problem that I've been running into is that one of the required fields is a custom field. I've tried creating the Project
in a couple of different ways and haven't had any success up to this point, so any help would be appreciated. I've tried creating it with both a REST call to /_api/ProjectServer/Projects and a SOAP call to /_vti_bin/PSI/Project.asmx. Below are the best shots
I've made at the two different calls with the errors I received. If anyone has any leads on the best way to do this the help would be appreciated!
REST POST /_api/ProjectServer/Projects
'odata.type' : 'PS.PublishedProject',
'Name' : 'OData Name',
'Custom_9d77d62aa92e4d40adc8446c90eb7456' : "O&M"
Response
error: {
code: "11713, Microsoft.ProjectServer.PJClientCallableException"
message: {
lang: "en-US"
value: "PJClientCallableException: CustomFieldRequiredValueNotProvided CustomFieldRequiredValueNotProvided mdpropuid = 9d77d62a-a92e-4d40-adc8-446c90eb7456"
SOAP POST /_vti_bin/PSI/Project.asmx
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:proj="http://schemas.microsoft.com/office/project/server/webservices/Project/" xmlns:projds="http://schemas.microsoft.com/office/project/server/webservices/ProjectDataSet/">
<soapenv:Header />
<soapenv:Body>
<proj:QueueCreateProject>
<proj:dataset>
<ProjectDataSet xmlns="http://schemas.microsoft.com/office/project/server/webservices/ProjectDataSet/">
<Project>
<PROJ_UID>e1c2d38b-1529-4128-b707-42a94045e55b</PROJ_UID>
<PROJ_NAME>Proj Dept Test 2</PROJ_NAME>
<PROJ_TYPE>0</PROJ_TYPE>
</Project>
<ProjectCustomFields>
<CUSTOM_FIELD_UID>4802a711-62a0-4f84-8e08-c7d22daadb5b</CUSTOM_FIELD_UID>
<PROJ_UID>e1c2d38b-1529-4128-b707-42a94045e55b</PROJ_UID>
<MD_PROP_UID>9d77d62a-a92e-4d40-adc8-446c90eb7456</MD_PROP_UID>
<FIELD_TYPE_ENUM>21</FIELD_TYPE_ENUM>
<CODE_VALUE>a47930d6-b89d-4f3a-b4e3-522015fe82a1</CODE_VALUE>
</ProjectCustomFields>
</ProjectDataSet>
</proj:dataset>
<proj:validateOnly>true</proj:validateOnly>
</proj:QueueCreateProject>
</soapenv:Body>
</soapenv:Envelope>
Response
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Body>
<s:Fault>
<faultcode>s:Server</faultcode>
<faultstring xml:lang="en-US">ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructor to access all error information</faultstring>
<detail>
<errinfo>
<general>
<class name="General Unhandled Exception in _Project.QueueCreateProject_">
<error id="42" name="GeneralUnhandledException" uid="184feeaf-906a-e411-9b2a-00155d388b02" Exception="System.Data.StrongTypingException: The value for column 'PROJ_TYPE' in table 'Project' is DBNull. ---> System.InvalidCastException: Specified cast is not valid.
at Microsoft.Office.Project.Server.Schema.ProjectDataSet.ProjectRow.get_PROJ_TYPE()
--- End of inner exception stack trace ---
at Microsoft.Office.Project.Server.Schema.ProjectDataSet.ProjectRow.get_PROJ_TYPE()
at Microsoft.Office.Project.Server.BusinessLayer.Project.FixupProjectType(ProjectDataSet projDS)
at Microsoft.Office.Project.Server.BusinessLayer.Project.QueueCreateProject(Guid jobUid, ProjectDataSet dataset, Boolean validateOnly)
at Microsoft.Office.Project.Server.Wcf.Implementation.ProjectImpl.<>c__DisplayClasse.<QueueCreateProject>b__d()
at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions)"/>
</class>
</general>
</errinfo>
</detail>
</s:Fault>
</s:Body>
</s:Envelope>

Julie,
You can create the fields that are project specifc & you can create fields that apply to all projects but have specific options for projects. Your goal is to create fields that are specific to each project, but right now you get all fields from you old project - is this correct?
From your description below it appears that the fields in your original project are marked as applied to all projects & hence when you create a new project they are inherited. If you mark those fields as applied to certain project & then create a new project those fields will not be inherited.
But you are right in the sense that it is limiting that there is no multi-select for "applies to" field.

Importing into Address Book with Custom Fields from a Text File.

Hello
I'm a teacher and like to create contacts for my students. The information that I want in each contact besides their name, email address and phone number are their
student id's, semester enrolled, class number and class title. For these four fields I create a "Custom" field with the appropriate names: "ID", "Term", "Course" and "Class" respectively.
All this information I can download from the school's server in a CSV file.
To import the information into Address Book, I choose "File -> Import -> Text File" and then select the CSV file that I downloaded. The import utility opens up correctly showing all the fields I would like to import, however, many of the fields are marked as "Do not import." When I click on that term to select my Custom fields, they do not show up. Is this a bug or "feature" of the Address Book? It seems to me that if you are allowed to create useful custom fields, you should be able to import data into them as well.
If I'm just ignorant of how to do this, I would appreciate some help. If there is no way to currently do this efficiently, it would be nice to have this feature added to the Address book in the near future.
Thanks for your consideration,
Gary

Thanks for posting your question and the reply from rojok...
I'm a teacher as well - in Entourage I was able to just copy a column of email addresses (say from an Excel spreadsheet, downloaded from the school's server here at U MD) and then create a group and simply paste that list into the group. Address Book makes you do the extra step of importing all the addresses first. (Note: Your last imported list of contacts in this manner shows up as "Last Import" in the groups lists column to the left in Address Book - so to add contacts to a Group there, you select that Last Import group, click once in that list column one contact, say, then select all of the list - then Command + A, for select all - then drag them all to your group you've made - i.e. "MySpringClassList"). This is NOT very intuitive I might add and incredibly cumbersome of a process.
To get around the customizable info I needed to import... I just chose options that I don't regularly use for those things I needed to import - i.e. student I.D., these I placed under "ICQ Other" - that way they're imported at least.
Good luck,
Andrew

Batch input with customer fields

Similar Messages

Maybe you are looking for