Batch Monitor - No Progress

I've read on these boards that there are problems submitting batches in 10.5 with compressor 3.0.2 - which is what I'm running. My problem is slightly different...I am able to submit a batch and call up the batch monitor, where the job is listed as "processing" - but the progress bar never updates - and I've let it run on a short clip for WAY over the time that it should take and it never completes...I've already deleted compressor, trashed the prefs. and re-installed...any ideas or am I seriously just stuck until Apple gets their act together and fixes this?

For the most part Apple doesn't monitor these discussions. Report the problem to the feedback page:
http://www.apple.com/feedback/compressor.html

Similar Messages

Batch Monitor Wont cancel item :(

I had a file that I wanted to compress from Motion, so I saved it to my desktop and put it through Compressor. I checked it in Batch monitor as it didn't seen to be doing anything also I spotted that I wanted one more filter on the footage, so I cancelled the file in batch monitor and trashed the desktop original.
My problem is now everytime I go back into batch monitor after submitting a new file in compressor, the canned file is still there trying to cancel and it wont let me get anything else done.
Please advise if anyone out there can help, as im going out of my mind trying to sort it out - my last resort is to do a clean install and I really dont want to do that

Cannot cancel a job in Batch Monitor
Posted: Jun 6, 2007 4:40 AM
Reply Email
I sumbitted a Compressor 3 job, a 10-sec Motion project that I wanted to encode in Flash using the On2 plugin (I also have Flash 8 installed). This kind of job was routine with Compressor 2 and took very little time.
With Compressor 3, things look weird. I submitted the job and almost 25 minutes later it was still sitting in the job list of the Batch Monitor, its progress bar empty, no processor activity reported. I decided to cancel this job but was not successful. I quit Batch Monitor, trashed permissions of both Compressor 3 and Batch Monitor, deleted the Motion project that was the source of the encode, re-installed Compressor 3 - nothing helps.
Now whenever I submit a new job it lands in the queue which is being halted by the old indestructible job. This defective job does not progress and I cannot cancel it. If I Reset Background Processing, this job comes back as a new job and sits there ticking off new time. The log follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<services>
</services>
If anyone can tell me how to get rid of this job without erasing the hard drive, I will be very grateful.
PowerMac G5 DP 2.7 Mac OS X (10.4.9) 3.5 Gb RAM, FCS2
scutdog
Posts: 9
Registered: Jun 3, 2007
Re: Cannot cancel a job in Batch Monitor
Posted: Jun 6, 2007 11:56 PM in response to: George Bazhenov
Helpful
Reply Email
Sounds similar to the problem I described in this thread.
This is how I deleted the entire queue when I couldn't cancel in Batch Monitor:
1) In the Finder, select the menu item Go->Go to Folder...
2) Enter /var/spool/qmaster
3) Trash the folder(s) that you see in that folder
4) In Compressor, select the menu item Compressor->Reset Background Processing...
Mac OS X (10.4.9)
I found this thanks George

Batch Monitor troubles - no progress

I'd like to export a project from final cut pro (6.0.4) with compressor (3.0.4), as I did about 50 times before. Compressor opens, I choose my settings and click "send". Batch Monitor opens and that's it. No progress in Batch Monitor, no encoding, no failure code, nothing.
In the information-box I find:
pid="261" what="service-request" req-id="06B72FBC-BBB5-4F63-B985-6C4CA034BFF2:1" msg="Error: unrecognized request."></mrk>
What's wrong? If possible I'd like to avoid to reinstall compressor.
I already deleted the prefs for compressor and batch Monitor, I repaired disk permissions and restarted.
Exporting the movie with quicktime works fine, exporting audio only works fine, too.
What's wrong with Batch Monitor? Any idea someone?
Thx, Wolfgang

Sounds like Qmaster has missing assets.
Qmaster is what controls batch monitors, batch lists.
You will need to reinstall Qmaster again.

Batch Monitor shows no progress - qmaster doesn't seem to process anything

I've been using this iMac since my company bought it a year ago and haven't had trouble with compressor until earlier this week when it just stopped working - no error message no crash - its just doesn't process jobs. I haven't updated anything or added any weird software of which I'm aware. Unfortunately I don't have a time machine back up to return to. We have the extended apple care and I haven't reformatted and reinstalled everything yet, I'm desperately trying to avoid that as I've already had to do it once in the past few months and it put me back at least a week of productivity as it took several days to get everything reinstalled. The same is true for taking it to the local apple specialist - took them a week last time I dropped a computer off there.
Whether its a file that I'm opening in compressor or a project I'm exporting from final cut I can wait for 20 hours and no progress is made I've done a great deal of searching on these as well as other online forums and taken lots of advice given to other people with similar problems and nothing seems to work here's what i've tried in a rough order:
Checking for Updates
Resetting back ground processes
Deleting preferences (for compresser et al)
turning sharing on/turning sharing off
starting qmaster using terminal
restarting qmaster using terminal
checking qmaster's settings using terminal and setting 'rendering' and processing to 'on'
Reinstalling compressor,qmaster,qadministrator and batch monitor using Pacifist
When Reinstalling I never click the box to share processing on a network
I've tried starting jobs with it disconnected from my office LAN
I've tried Everything on the compressor troubleshooting basics page including deleting all files associate with compressor, qmaster, qadmin and even motion and reinstalling them.
after each reinstall I always update compressor as it wont even start in snow leopard without updating
I've checked in activity monitor - qmaster is running just fine, it appears.
If anyone has any more suggestions as to things that could be done, please offer them.

try these initial things:
• check the QMASTER logs in /var/logs (or simply use the /applications/utilities/CONSOLE.app). IF its failing or stalled there WILL be a reason for it.
• look for QMASTER crashes logs...... you maybe not be able to red the dump but there will be a common thing in there somewhere...
• stalled?: maybe sitting in the ACTIVE QUEUE with PROCESSING, but doing nothing.. maybe one of the services has failed. I se an EMAIL address up in the compressor to tell if anything broke. works great!
• stalled?: maybe your set up the cluster maybe expecting MANAGED SERVICEs and you cluster is not SETup for that.lots of these things.
anyway, have a look in the console logs and post your stuff. Happy to help you with it.
I have found the latest qmaster and compressor with FCS3 is very good.
LAstly, I have had the ODD thing that utilises PERIAN plugins etc t sit and do nothing. PErian ends up dumping.. anyway all this can be worked around.
w

Batch Monitor Command line Check Progress

Hey all,
i was wondering if there is a way to check progress of a file i sent to compressor using command line.
Thanks
Lars

ok so i found a pdf which tells me this:
Below is a synopsis of the command for monitoring batches. The Batch Monitor
command is located in /Applications/Utilities/Batch Monitor.app/Contents/MacOS.
Batch Monitor [-clustername <name>] [-clusterid <user name:password@IP address:port
number>] [-jobid <identifier> -batchid <identifier>] [-timeout <seconds>] [-query
<seconds>] [-help]
i tried putting that in but the result i get is Batch: garbled time
any ideas
Thanks
ars

Droplet created in 3.0 running now in 3.5 doesn't submit to Batch Monitor?

I've got a droplet I created in FCS2 (Compressor 3?).
I upgraded to FCS3 and tried to use my droplet.
I get a window with 'Server: This computer - submitting 1 files'
But in the Batch Monitor I never see anything appear under 'This Computer'.
It's just a simple droplet to take a ProRes 422 HQ captured from an HV20 in their 24p in 60i format - that strips out the extra garbage and reverse telecines.
1st time I've tried to use it with Compressor 3.5.
How can I debug this?
Name: 24p
Description: Apple ProRes 422 10-bit video with audio pass-through. Settings based off the source resolution and frame-rate.
File Extension: mov
Estimated size: 73.75 GB/hour of source
Audio: multi-track passthrough
Video Encoder
Format: QT
Width: 1920
Height: 1080
Pixel aspect ratio: Square
Crop: None
Padding: None
Frame rate: 23.976
Frame Controls On:
Retiming: (Fast) Nearest Frame
Resize Filter: Linear Filter
Deinterlace Filter: Reverse Telecine
Adaptive Details: Off
Antialias: 0
Detail Level: 0
Field Output: Progressive
Codec Type: Apple ProRes 422 (HQ)
Multi-pass: Off, frame reorder: Off
Automatic gamma correction
Progressive
Chroma filtering enabled
Pixel depth: 24
Spatial quality: 50
Min. Spatial quality: 0
Temporal quality: 0
Min. temporal quality: 0

I found the original droplet in my Compressor settings list, and created a new droplet from 3.5.
This time, when I dropped a file on it, it worked.
But - in case I need to convert a droplet from 3.0 to 3.5 (that doesn't exist in Compressor settings), is there a way?

Compressor 4 files not showing up in Batch Monitor

Appartenly Batch monitor doesn't work with compressor 4. Using a droplet and I can't monitor the progress. Any thoughts?

Batch Monitor got replaced by "Share Monitor".
Two ways to start monitoring:
1. check the "Automatically launch Share Monitor" in Compressor 4's Preferences
2. Nagiate intoi the Compressor 4 Package and there to /Contents/PlugIns/Compressor/CompressorKit.bundle/Contents/EmbeddedApps and start Share Monitor from there
Either way I recommend to stick it to the Dock once you've opened Share Monitor successfully.

Batch Monitor keeps crashing

I have Final Cut Studio 1.0. I recently had a system crash with which I had no choice but to do an archive and install to restore 10.4.2. I then had to re-install FCS 1.0 again as most of it was not working properly after the event. I also downloaded all of the appropriate upgrades.
Everything is working fine except that the Batch Monitor consistently crashes...doesn't seem to matter whether I open Compressor independently or if I use if from FCP. I went to the Apple site and followed directions for a re-install of Compressor and Apple Q-master. This didn't help the problem. It's really just an annoyance as Compressor does actually process my files...I just can't see Batch Monitor in order to know what the progress is. Argh.
Any suggestions?

The application Batch Monitor quit unexpectedly
Mac OS X and other applications are not affected.
Click Reopen to open the application again. Click report to see more details or send a report to Apple.
Report to Apple
Date/Time: 2006-04-09 20:28:29.526 -0500
OS Version: 10.4.6 (Build 8I127)
Report Version: 4
Command: Batch Monitor
Path: /Applications/Utilities/Batch Monitor.app/Contents/MacOS/Batch Monitor
Parent: WindowServer [61]
Version: 2.0.1 (2.0.1)
Build Version: 1
Project Name: QMaster
Source Version: 1600000
PID: 1988
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
Thread 0 Crashed:
0 <<00000000>> 0x00000000 0 + 0
1 com.apple.BatchMonitor 0x00010620 0x1000 + 63008
2 com.apple.BatchMonitor 0x00011764 0x1000 + 67428
3 com.apple.BatchMonitor 0x00012528 0x1000 + 70952
4 com.apple.Foundation 0x92983a00 __NSFireMainThreadPerform + 276
5 com.apple.CoreFoundation 0x90814f2c __CFRunLoopPerformPerform + 104
6 com.apple.CoreFoundation 0x907e4a68 __CFRunLoopDoSources0 + 384
7 com.apple.CoreFoundation 0x907e3f98 __CFRunLoopRun + 452
8 com.apple.CoreFoundation 0x907e3a18 CFRunLoopRunSpecific + 268
9 com.apple.HIToolbox 0x9321d980 RunCurrentEventLoopInMode + 264
10 com.apple.HIToolbox 0x9321d014 ReceiveNextEventCommon + 380
11 com.apple.HIToolbox 0x9321ce80 BlockUntilNextEventMatchingListInMode + 96
12 com.apple.AppKit 0x936ff104 _DPSNextEvent + 384
13 com.apple.AppKit 0x936fedc8 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
14 com.apple.AppKit 0x936fb30c -[NSApplication run] + 472
15 com.apple.prokit 0x95eed514 NSProApplicationMain + 288
16 com.apple.BatchMonitor 0x0000c4e0 0x1000 + 46304
17 dyld 0x8fe01048 dyldstart + 60
Thread 1:
0 libSystem.B.dylib 0x9000b0a8 machmsgtrap + 8
1 libSystem.B.dylib 0x9000affc mach_msg + 60
2 com.apple.CoreFoundation 0x907e4114 __CFRunLoopRun + 832
3 com.apple.CoreFoundation 0x907e3a18 CFRunLoopRunSpecific + 268
4 com.apple.CoreFoundation 0x907f2e78 CFRunLoopRun + 52
5 com.apple.qmaster.do 0x7f4a5d94 swamp::CRAdReceiver2::ReceivingThread::runOnce() + 292
6 com.apple.AECore 0x7f9028fc aecore::CThread::runThread() + 60
7 com.apple.AECore 0x7f90031c threadProc(void*) + 16
8 libSystem.B.dylib 0x9002ba68 pthreadbody + 96
Thread 2:
0 libSystem.B.dylib 0x9001f5ec select + 12
1 com.apple.AECore 0x7f90292c aecore::CThread::runThread() + 108
2 com.apple.AECore 0x7f90031c threadProc(void*) + 16
3 libSystem.B.dylib 0x9002ba68 pthreadbody + 96
Thread 3:
0 libSystem.B.dylib 0x9001f5ec select + 12
1 com.apple.CoreFoundation 0x907f69a8 __CFSocketManager + 472
2 libSystem.B.dylib 0x9002ba68 pthreadbody + 96
Thread 4:
0 libSystem.B.dylib 0x9002c128 semaphorewait_signaltrap + 8
1 libSystem.B.dylib 0x90030bec pthreadcondwait + 480
2 com.apple.ColorSync 0x915d3224 pthreadSemaphoreWait(t_pthreadSemaphore*) + 56
3 com.apple.ColorSync 0x915d24c0 CMMConvTask(void*) + 40
4 libSystem.B.dylib 0x9002ba68 pthreadbody + 96
Thread 0 crashed with PPC Thread State 64:
srr0: 0x0000000000000000 srr1: 0x100000004200f030 vrsave: 0x0000000000000000
cr: 0x84028282 xer: 0x0000000020000000 lr: 0x000000000000fdc4 ctr: 0x0000000000000000
r0: 0x000000000000fdac r1: 0x00000000bfffe210 r2: 0x000000007f253d48 r3: 0x00000000bfffe290
r4: 0x00000000003af2e0 r5: 0x00000000003af2e0 r6: 0xffffffff80808080 r7: 0x0000000000000000
r8: 0x0000000000000000 r9: 0x0000000000000000 r10: 0xfffffffffefefeff r11: 0x0000000000000006
r12: 0x0000000000000000 r13: 0x0000000000000000 r14: 0x0000000000000001 r15: 0x0000000000000001
r16: 0x00000000003ac5a0 r17: 0x0000000000330300 r18: 0x0000000000080000 r19: 0x00000000003a4870
r20: 0x00000000003a9dd0 r21: 0x0000000000080000 r22: 0x000000000032bd40 r23: 0x00000000003af680
r24: 0x00000000bfffe250 r25: 0x00000000bfffe3e0 r26: 0x0000000000339c20 r27: 0x00000000bfffe290
r28: 0x00000000003adf10 r29: 0x0000000000000006 r30: 0x00000000bfffe310 r31: 0x00000000bfffe280
Binary Images Description:
0x1000 - 0x70fff com.apple.BatchMonitor 2.0.1 /Applications/Utilities/Batch Monitor.app/Contents/MacOS/Batch Monitor
0xcc000 - 0xe9fff com.apple.prokit.TigerPanels 3.1 (589) /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/Resources/TigerPa nels.bundle/Contents/MacOS/TigerPanels
0x7e4e0000 - 0x7e4e0fff com.apple.qmaster.swamp 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Qmaster
0x7e4f0000 - 0x7e548fff com.apple.qmaster.SwampUtil 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/SwampUtil.framework /Versions/A/SwampUtil
0x7e640000 - 0x7e6a6fff com.apple.qmaster.SwampUI 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/SwampUI.framework/V ersions/A/SwampUI
0x7e7c0000 - 0x7e7f2fff com.apple.qmaster.SwampTypes 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/SwampTypes.framewor k/Versions/A/SwampTypes
0x7e890000 - 0x7e8e7fff com.apple.qmaster.SwampService 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/SwampService.framew ork/Versions/A/SwampService
0x7e9e0000 - 0x7ea38fff com.apple.qmaster.SwampExecutor 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/SwampExecutor.frame work/Versions/A/SwampExecutor
0x7eb40000 - 0x7ebbefff com.apple.qmaster.SwampCore 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/SwampCore.framework /Versions/A/SwampCore
0x7ed10000 - 0x7ed6bfff com.apple.qmaster.Status 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/Status.framework/Ve rsions/A/Status
0x7ee80000 - 0x7eed9fff com.apple.qmaster.ServiceControl 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/ServiceControl.fram ework/Versions/A/ServiceControl
0x7efe0000 - 0x7f036fff com.apple.qmaster.RequestProcessing 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/RequestProcessing.f ramework/Versions/A/RequestProcessing
0x7f140000 - 0x7f227fff com.apple.qmaster.JobControl 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/JobControl.framewor k/Versions/A/JobControl
0x7f490000 - 0x7f524fff com.apple.qmaster.do 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/DistributedObjects. framework/Versions/A/DistributedObjects
0x7f6c0000 - 0x7f737fff com.apple.qmaster.ContentControl 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/ContentControl.fram ework/Versions/A/ContentControl
0x7f890000 - 0x7f8a9fff com.apple.qmaster.ClusterManager 2.0 /Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/ClusterManager.fram ework/Versions/A/ClusterManager
0x7f8f0000 - 0x7f9bdfff com.apple.AECore 2.0 /Library/Frameworks/AECore.framework/Versions/A/AECore
0x8fa79000 - 0x8fd27fff com.apple.QuickTime 7.0.4 /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x8fe00000 - 0x8fe51fff dyld 44.4 /usr/lib/dyld
0x90000000 - 0x901bbfff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x90213000 - 0x90218fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x9021a000 - 0x9026dfff com.apple.CoreText 1.0.1 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x9029a000 - 0x9034bfff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x9037a000 - 0x90734fff com.apple.CoreGraphics 1.258.27 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x907c1000 - 0x9089afff com.apple.CoreFoundation 6.4.4 (368.25) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x908e3000 - 0x908e3fff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x908e5000 - 0x909e7fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x90a41000 - 0x90ac5fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x90aef000 - 0x90b5dfff com.apple.framework.IOKit 1.4 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90b74000 - 0x90b86fff libauto.dylib /usr/lib/libauto.dylib
0x90b8d000 - 0x90e65fff com.apple.CoreServices.CarbonCore 681.3 (671.2) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x90ecb000 - 0x90f4bfff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x90f95000 - 0x90fd6fff com.apple.CFNetwork 4.0 (129.13) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x90feb000 - 0x91003fff com.apple.WebServices 1.1.2 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
0x91013000 - 0x91094fff com.apple.SearchKit 1.0.5 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x910da000 - 0x91104fff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x91115000 - 0x91123fff libz.1.dylib /usr/lib/libz.1.dylib
0x91126000 - 0x912e9fff com.apple.security 4.3 (25966) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x913ec000 - 0x913f5fff com.apple.DiskArbitration 2.1 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x913fc000 - 0x91423fff com.apple.SystemConfiguration 1.8.2 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x91436000 - 0x91441fff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x91446000 - 0x91466fff libmx.A.dylib /usr/lib/libmx.A.dylib
0x9146c000 - 0x91474fff libbsm.dylib /usr/lib/libbsm.dylib
0x91478000 - 0x914f3fff com.apple.audio.CoreAudio 3.0.3 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x91530000 - 0x91530fff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x91532000 - 0x9156afff com.apple.AE 1.5 (297) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
0x91585000 - 0x91652fff com.apple.ColorSync 4.4.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x916a7000 - 0x91738fff com.apple.print.framework.PrintCore 4.5 (177.10) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x9177f000 - 0x91836fff com.apple.QD 3.8.19 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x91873000 - 0x918d1fff com.apple.HIServices 1.5.1 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x918ff000 - 0x91923fff com.apple.LangAnalysis 1.6.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x91937000 - 0x9195cfff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
0x9196f000 - 0x919b1fff com.apple.LaunchServices 168.10 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
0x919cd000 - 0x919e1fff com.apple.speech.synthesis.framework 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x919ef000 - 0x91a2efff com.apple.ImageIO.framework 1.4.6 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x91a44000 - 0x91b0cfff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x91b5a000 - 0x91b6ffff libcups.2.dylib /usr/lib/libcups.2.dylib
0x91b74000 - 0x91b91fff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x91b96000 - 0x91c05fff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJP2.dylib
0x91c1c000 - 0x91c20fff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x91c22000 - 0x91c69fff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRaw.dylib
0x91c6e000 - 0x91cabfff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x91cb2000 - 0x91ccbfff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x91cd0000 - 0x91cd3fff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x91cd5000 - 0x91cd5fff com.apple.Accelerate 1.2.1 (Accelerate 1.2.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x91cd7000 - 0x91db7fff com.apple.vImage 2.3 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x91dbf000 - 0x91ddefff com.apple.Accelerate.vecLib 3.2.1 (vecLib 3.2.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x91e4a000 - 0x91eb8fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x91ec3000 - 0x91f57fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x91f71000 - 0x924f9fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x9252c000 - 0x92857fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x92887000 - 0x9290ffff com.apple.DesktopServices 1.3.3 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x92950000 - 0x92b7bfff com.apple.Foundation 6.4.5 (567.26) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x92c99000 - 0x92d77fff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x92d97000 - 0x92e85fff libiconv.2.dylib /usr/lib/libiconv.2.dylib
0x92e97000 - 0x92eb5fff libGL.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x92ec0000 - 0x92f1afff libGLU.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x92f38000 - 0x92f38fff com.apple.Carbon 10.4 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x92f3a000 - 0x92f4efff com.apple.ImageCapture 3.0 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x92f66000 - 0x92f76fff com.apple.speech.recognition.framework 3.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x92f82000 - 0x92f97fff com.apple.securityhi 2.0 (203) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x92fa9000 - 0x93030fff com.apple.ink.framework 101.2 (69) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x93044000 - 0x9304ffff com.apple.help 1.0.3 (32) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x93059000 - 0x93086fff com.apple.openscripting 1.2.5 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x930a0000 - 0x930b0fff com.apple.print.framework.Print 5.0 (190.1) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x930bc000 - 0x93122fff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x93153000 - 0x931a2fff com.apple.NavigationServices 3.4.4 (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x931d0000 - 0x931edfff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x931ff000 - 0x9320cfff com.apple.CommonPanels 1.2.2 (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x93215000 - 0x93522fff com.apple.HIToolbox 1.4.6 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x93671000 - 0x9367dfff com.apple.opengl 1.4.7 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x936f5000 - 0x936f5fff com.apple.Cocoa 6.4 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x936f7000 - 0x93d2afff com.apple.AppKit 6.4.4 (824.33) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x940b7000 - 0x94127fff com.apple.CoreData 80 /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x94160000 - 0x9422afff com.apple.audio.toolbox.AudioToolbox 1.4.1 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x9427e000 - 0x9427efff com.apple.audio.units.AudioUnit 1.4 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x94280000 - 0x94434fff com.apple.QuartzCore 1.4.7 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x94487000 - 0x944c4fff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib
0x944cc000 - 0x9451cfff libGLImage.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x9455c000 - 0x945a0fff com.apple.bom 8.3 (86.1) /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
0x945ac000 - 0x945e4fff com.apple.vmutils 4.0.0 (85) /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
0x946bf000 - 0x946cefff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
0x946d6000 - 0x946e2fff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x94728000 - 0x94740fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x94747000 - 0x947b8fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib
0x95ecd000 - 0x95f9ffff com.apple.prokit 3.1 (589) /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
Model: PowerMac7,3, BootROM 5.1.8f7, 2 processors, PowerPC G5 (2.2), 2 GHz, 2 GB
Graphics: ATI Radeon 9600 XT, ATY,RV360, AGP, 128 MB
Memory Module: DIMM0/J11, 512 MB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM1/J12, 512 MB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM2/J13, 512 MB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM3/J14, 512 MB, DDR SDRAM, PC3200U-30330
AirPort: AirPort Extreme, 404.2 (3.90.34.0.p16)
Modem: Jump, , V.92, Version 1.0,
Bluetooth: Version 1.7.3f4, 2 service, 0 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Maxtor 6Y160M0, 152.67 GB
Parallel ATA Device: PIONEER DVD-RW DVR-117D,
USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
USB Device: SoundSticks, harman/kardon, Up to 12 Mb/sec, 500 mA
USB Device: Hub, , Up to 480 Mb/sec, 500 mA
USB Device: iPod, Apple, Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: Apple Cinema Display, , Up to 1.5 Mb/sec, 500 mA
FireWire Device: eyetv 200, 0xC6C, Up to 400 Mb/sec
FireWire Device: LaCie Big Disk Extreme LUN 0, LaCie Group SA, Up to 800 Mb/sec
FireWire Device: LaCie Big Disk Extreme LUN 0, LaCie Group SA, Up to 800 Mb/sec
FireWire Device: unknown_device, unknown_value, Up to 400 Mb/sec

Batch Monitor not appearing

I know, I'm using an much older version of Compressor (1.2 to be exact). It is working, but oddly enough, the button for Batch Monitor brings up nothing. It is supposed to bring up a monitor so I can watch the progress, but nothing happens when I press it. It does encode the files, but I have no way of checking the progress until the file has completed and actually opens (very odd way to check things). Anyone ever experience this? I have turned of open Batch Monitor on launch to see if that would work, but it still doesn't appear. Very very strange.

Hi Jorge.
You should also be able to track the process in the History window.
Has the batch monitor wrorked previously for you?
Russ

Batch Monitor and Compressor do nothing when I submit...

Hey, guys,
I've re-install the whole OS and Final Cut Studio 2,
I use Compressor to encode my video clip,
after setup the format and the destination,
I click the "submit" Button, the batch job send to Batch Monitor,
but Compressor and Batch Monitor do nothing, the status bar didn't run.
Compressor's CPU usage is only about 0.x %.
Any body have the same problem?
How to solve this problem?

hi Thomas!
I have norton 2005 and turned it off when I downloaded itunes and I get the same result. quicktime will open for me however.
NIS 2005 is the usual suspect with "symptomless launch suppression".
first try:
b noir, "itunes wont open" #6, 02:11pm Oct 3, 2005 CDT
... but if no joy with that, try:
Lorraine M, "NIS/i-tunes problem rectified" #2, 01:51am Oct 17, 2005 CDT
keep us posted.
love, b

Submitted tasks not appearing in the batch monitor

In other words Compressor seems to be totally useless after the update.
I select my preset, and the destination, I click submit, I get the little popup with the name, cluster and priority options, I click submit, and then nothing happens. Nothing at all. Nothing appears in the batch monitor, just nothing.
A little "last submitted at.." appears at the bottom of the upper window, but that's it.
Can anyone please help? Compressor was working so well before the update...

OK, now I've noticed something else. When I submit, the batch instantly fails.
If I open the batch monitor I can click on the failed files, revealing this fault: 3x INVOKING METHOD OR ACCESSING MEMBER FOR NULL REFERENCE

Compressor Batch - will NOT open batch monitor

i had to reinstall my friends FCP/Compressor/DVDSP (he didn't want the other stuff)
but now when we try to export a file from compressor to a dvd file such as dolby audio
we get an error saying "unable to connect to background process"
any ideas? maybe we need to install something else?
i did notice (at least i think) batch monitor was in the applications folder and now its in utilities
maybe thats the issue?
any ideas i can give him so we can continue to work on some stuff
thanks

Batch Monitor is meant to be in Utilities, so that is fine.
Try these steps (I assume you are using Compressor 3):
http://www.digitalrebellion.com/blog/posts/compressorerror_unable_to_connect_to_backgroundprocess.html

Droplet jobs submitted not showing up in Batch Monitor

I am compressing MP4 files in large batches of 100-150 files at a time by dragging them over a droplet. I can submit about 4-6 batches in a row, but after that Batch Monitor does not appear to accept anymore batches.
I can continue dragging files over my droplet and submit the batch. The process completes as if the batch was submitted successfully, but it never shows up in batch monitor and the output files are never created. Any ideas?
I have three, dual-quad Intel machines with 8 GB of RAM in their own private cluster processing my jobs.

Setting found to increase number of jobs.

Submited Jobs not showing up in Batch monitor

I just got done with a reinstall of compressor and Qmaster with some positive results. I can now start a quickcluster just fine, and have it show up in compressor and submit to it. When i click the submit button, The batch doesn't show up in batch monitor. Even when i try submitting it "My Computer" it still fails to show up in batch monitor.
Anyone have any ideas?

Batch monitor was set to list completed jobs. I'm an idiot.

Monitoring the progress of an HTTP File Request

Hi,
I've written a little applet used to sending Files to a PHP-Application. Everything works fine. Now I try to monitor the progress of the upload and I have a little problem. This are the main functions:
     public void addFile (String name, File file) throws IOException {
          this.bytesComplete = file.length();
          addFile(name, file.getPath(), new FileInputStream(file));
     public void addFile (String name, String filename, InputStream is) throws IOException {
          writeBoundary();
          writeName(name);
          write("; filename=\"");
          write(filename);
          write('"');
          newline();
          write("Content-Type: ");
          String type = connection.guessContentTypeFromName(filename);
          if (type == null) {
               type = "application/octet-stream";
          writeln(type);
          newline();
          pipe(is, os);
          newline();
     private void pipe(InputStream in, OutputStream out) throws IOException {
          this.bytesWritten = 0;
          byte[] buf = new byte[4096];
          int nread;
          int navailable;
          int total = 0;
          synchronized (in) {
               while((nread = in.read(buf, 0, buf.length)) >= 0) {
                    out.write(buf, 0, nread);
                    out.flush();
                    total += nread;
                    this.bytesWritten += nread;
          out.flush();
          buf = null;
     }Somewhere else the function is called
     addFile ("file", filelist.get(i));Works fine, but now I've tried to monitor the actual progress by adding the following line between out.write and out.flush in the pipe-method
int actualStatus = Math.round (this.bytesWritten / this.bytesComplete * 100);
addProgress (actualStatus); // this method sets a JProgressBarAnd now something strange happens. It seems that all the data first is read so my progress goes to 100% in half a second and then is written later. I understand that os.flush only suggests (!) to write the data but not forces to do so.
Is there a way to monitor the progress in real-time, so I can show a user how many data already is transferred? To do a real forced flush? Thanks for your help

Maybe it's a bug: just found this: http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=5026745
Does maybe anybody know a work-around?
Edited by: thomwiesel on 23.03.2010 13:44
Edited by: thomwiesel on 23.03.2010 13:45

Batch Monitor - No Progress

Similar Messages

Maybe you are looking for