Batch rename stops working after initial folder

So I have a tonne of video frames to rename.
I batch rename the first folder with about 1000 images. Everything works fine.
I go to next folder, click batch rename...nothing happens. I try everything including purging cache and trying again...nothing.
Only thing that works is when I restart Bridge.
Help?

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Similar Messages

Adobe Bridge Batch Rename Stopped Working

ive been using bridge exclusively to rename/
organize my files and today for some odd reason it just will not work. i select the files i wish to rename and then select batch rename and name/numer the files as ive always done before and when i click rename nothing happens at all. i cleared out my cache to no avail and im now officially stumped. any help is appreciated. thanks!

Your problem does seem odd. Difficult to troubleshoot by remote, so run a few tests and see if you can narrow the problem down.
By any chance are you trying a batch re-name of files on an external drive? If so may be permissioning problem.
Do you have this problem in all folders or just one? If one there may be a contaminated file or name (i.e. flower.jpeg.jpeg)
To avoid fouling up your files copy a dozen or so and put in "test" folder then run these tests.
Can you do a simple rename of one file?
Can you do a batch rename of one file?
If the above is true can you do batch rename for all files in this folder?
If so does the extension make any difference - jpeg, psd, etc.?

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

The audio in "speak screen" stops working after a few uses. IOS 8.2 did not fix this problem unfortunately. I'm using the Alex voice on a Sprint iPhone 6 plus- if that matters.

I really enjoy the speak screen feature, as the voiceover is too inconvenient and tricky to use. The speak screen option works oerfectly for reading, and helps me as I'm dyslexic. However, the Alex voice stops working after the initial use or soon after. I then have to restart the phone every time in order to get the speak screen to acruelly speak again. Really annoying and was hoping that IOS 8.2 Would fix this, but it appears it had not fixed this bug. Any help with this?

Any problem when connected to another wi-fi network besides your own?
The only additonal troubleshooting options after powering the iPhone off and on, an iPhone reset, and resetting network settings on the iPhone is restoring the iPhone with iTunes from the iPhone's backup and/or restoring with iTunes as a new iPhone or not from the backup.
If no change after restoring as a new iPhone or not from the backup - the same when connected to any wi-fi network besides your own as well as not being able to maintain internet access when connected to your carrier's cellular network, the iPhone has a hardware problem.

USB audio DAC stops working after suspend

I didn't update my mediacenter running arch for a few months so I figured i'd reinstall it because of the filesystem, /lib and grub changes. Now after reinstalling I'm running into the issue that my USB audio DAC stops working after a suspend.
After a suspend speaker-test gives me the following error:
[user@mediacenter ~]$ speaker-test -c 2
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1068:(snd_pcm_dmix_open) unable to open slave
Playback open error: -77,File descriptor in bad state
I've tried replugging my DAC and restarting ALSA, without any success. I have to reboot to get sound again.
Output of /var/log/pm-suspend.log
za jul 21 19:20:24 CEST 2012: performing suspend
Initial commandline parameters:
za jul 21 19:22:06 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux mediacenter 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 0
bluetooth 190551 3 rfcomm
rfkill 15604 1 bluetooth
r8169 49386 0
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
snd_usb_audio 93519 2
snd_hwdep 6300 1 snd_usb_audio
snd_usbmidi_lib 18744 1 snd_usb_audio
snd_rawmidi 18479 1 snd_usbmidi_lib
snd_seq_device 5300 1 snd_rawmidi
snd_pcm 74958 2 snd_usb_audio
snd_page_alloc 7217 1 snd_pcm
snd_timer 18966 2 snd_pcm
mei 32152 0
snd 58997 9 snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_seq_device
usb_storage 44760 0
uas 9285 0
i2c_i801 8180 0
microcode 12185 0
iTCO_wdt 12813 0
coretemp 5654 0
iTCO_vendor_support 1929 1 iTCO_wdt
crc32c_intel 1987 0
joydev 9991 0
soundcore 5410 1 snd
mii 4123 1 r8169
firewire_ohci 31677 0
firewire_core 51552 1 firewire_ohci
pcspkr 1899 0
serio_raw 4653 0
processor 26567 1 acpi_cpufreq
crc_itu_t 1363 1 firewire_core
evdev 9754 5
ext4 424175 3
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
sr_mod 14823 0
sd_mod 29239 5
cdrom 35648 1 sr_mod
usbhid 36430 0
hid 85477 1 usbhid
ahci 20549 4
libahci 20023 1 ahci
uhci_hcd 23404 0
pata_jmicron 2480 0
pata_acpi 3408 0
ata_generic 3295 0
ehci_hcd 41026 0
libata 167611 5 ahci,pata_acpi,libahci,ata_generic,pata_jmicron
scsi_mod 132974 5 uas,usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 uas,uhci_hcd,snd_usb_audio,usb_storage,snd_usbmidi_lib,ehci_hcd,usbhid
usb_common 954 1 usbcore
i915 438144 4
video 11307 1 i915
button 4502 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10936 1 i915
intel_gtt 14047 3 i915,intel_agp
drm_kms_helper 33051 1 i915
drm 208958 5 i915,drm_kms_helper
i2c_core 20369 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
total used free shared buffers cached
Mem: 3721220 336284 3384936 0 16624 156204
-/+ buffers/cache: 163456 3557764
Swap: 265068 0 265068
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
za jul 21 19:22:07 CEST 2012: performing suspend
za jul 21 19:22:22 CEST 2012: Awake.
za jul 21 19:22:22 CEST 2012: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /etc/pm/sleep.d/90alsa resume suspend:
ALSA lib pcm_dmix.c:1068:(snd_pcm_dmix_open) unable to open slave
aplay: main:682: audio open error: File descriptor in bad state
/etc/pm/sleep.d/90alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
za jul 21 19:22:23 CEST 2012: Finished.
Output of aplay -l
[user@mediacenter ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: DAC [USB Audio DAC], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
What I'm noticing is that after a suspend "Subdevices: 0/1" gets changed to "Subdevices: 1/1".
Any help is much appreciated!
Last edited by Quaith (2012-07-21 17:33:59)

Odysseus wrote:
Unless you can find a way to stop XBMC from using your DAC, I would try hunting down the update which broke it and file a bug report with the appropriate project. https://wiki.archlinux.org/index.php/Do … g_Packages.
I suspect it would be the kernel.
Yes I am suspecting the kernel as well. I'll try to change some options in XBMC to maybe get this working, and if not I'll see how far I can downgrade with the kernel. My last installation was a few months old so I hope it broke not that long ago.
Thanks for the help

Batch Rename Raw Files After Import?

Can you batch rename raw files after you import, so that the file name changes in Aperture and on the hard drive? I want to be able to edit images, and then rename only the keepers. This has been asked before here, but I could not find an answer.
Thanks!

File -> Export, Kind: Original
When you import a Raw to iPhoto it automatically creates a jepg preview of the file. Why? Because you cannot do anything with a Raw: you cannot print it, use it a slideshow and so on. However, with this preview you can work with the photo immediately.
You can, however, also process the Raw in iPhoto simply by editing it. The Raw processing engine in iPhoto the same one used in Aperture, but with less fine control. (Think of the differences between Word and TextEdit, iMovie and Final Cut). The output from the processing then replaces the preview. You can choose to save your output as either jpeg or tiff in the iPhoto Preferences.
When you are processing Raw in iPhoto you will see the Raw badge on the bottom of the iPhoto Window
Uploaded with plasq's Skitch!
Note: After you have processed a Raw, subsequent edits to the photo are carried out on the processed jpeg (or tiff) not the Raw. If you want to go back to the original then you need to use the Photos -> Reprocess Raw command.
Aperture works in an entirely different way. What are you trying to do, exactly?
Regards
TD

Why has Broken Sword 2.5 stopped working after OS X Lion 10.7.5 update?

Dear users,
Would any know why the fangame Broken Sword 2.5 stopped working after I decided to update my OS X Lion up to 10.7.5?
Should this be a prompt for me to re-install the game after copying my save files?
Thankfully ScummVM seems to be okay ...
This sort of brings back memories of Windows.
Thank you

The savefiles were no where to be found, not even in the Application Support folder.
I re-installed the .dmg file and chose "Replace" after dragging the App icon in to the Applications folder ... And still no results

Pavilion g6 sound stops working after a while

Over the past week the sound in my laptop has begun to stop working after a while of the laptop being on. It works initially but after a while when I check it doesn't work anymore. The mute button does not mute work, the volume increse and decreases on the screen but it does not affect the absense of sound. Please Help.
System Details: HP Pavilion g6, Windows 8

HI. I'm having the same problem. This has been happening for some time now. I can play anything with sound and then it suddenly goes and I can't use the mute/on/off or work out what's happening. Is it a fault?

My sound stopped working after installing Java

my sound stopped working after installing Java

Make sure Must is not selected in System Preferences > Sound
Might be corrupted sound preferences ...
Open the Finder.
From the Finder menu bar click Go > Go to Folder
Type or copy/paste: /Library/Preferences
Click Go then move the com.apple.soundpref.plist file from the Preferences folder to the Trash.

Photoshop elements 12 stopped working after swapping mainboard

Hi everybody!
On a Win 7 Pro PC the PSE 12 Photo Editor stopped working after swapping the defective mainboard.
I tried uninstall and reinstall as admin, with disabled security software.
We always get the welcome screen from where you launch organizer or editor, of which only the organizer works.
Launching the editor directly from the application folder or from within the organizer fails too.
Also the newest update installed, does not change this behaviour.
I'd appreciate your suggestions!
Dirk

I am having the same problem and tried calling tech support was on hold for an hour and a half its
driving me crazy trying to figure it out. Did an online chat which was no help what so ever.
If I find out something I will let you know for sure...

Why did AME stop working after the last Windows 7 update

AME suddenly stopped working after the last Windows 7 update. After the initial splash screen, I get a message saying that AME is not working and the program will be closed. Then I get the windows message that it is searching for a solution, then nothing. I am using the Production CS6. This happens whether I try to start AME directly, or queuing through Premiere Pro. I have tried reinstalling the entire package and have implemented all available updates from Adobe. I have no clue why this happened, but AME is crucial to my workflow.

Try to delete the following folders and then launch AME:
%AppData%\Adobe\Adobe Media Encoder
%AppData%\Adobe\Common
Make sure to first make a backup of those folders.

Hi, my name is Amit, my hot corners stop working after some time. Have to go to mission control to reset them, however they stop again after some time. This is annoying. Can someone please assist to solve this problem? Thanks Amit.

Hi my name is Amit, after upgrading to OS X Maverick I often have problem of my Hot corners stop working after a short period of time. I have to go to mission control and have to reset them for them to start working again. However this is temparory and they stop working again and this is quite annoying. Can someone suggest a cure to this problem please. I will be grateful. Thanks Amit.

Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.dock.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Desktop, leaving the window open. Log out or restart the computer and test. If there's no change, put the item you moved back where it was, overwriting the one that may have been created in its place. Log out again. Otherwise, delete the item you moved.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

SharePoint Online 2013 Workflows for one List stopped working after 07/08/2014

Our client host application in Office 365 SharePoint Online 2013, and we just found that all workflows for one list stopped working after 7, Aug 2014. It kept displaying pop-up message "Something went wrong. To try again, reload the page and then start
the workflow." when manually start a workflow for this List.
Tested workflow for other list, there's no problem.
Could anyone can help on this issue?

Our client host application in Office 365 SharePoint Online 2013, and we just found that all workflows for one list stopped working after 7, Aug 2014. It kept displaying pop-up message "Something went wrong. To try again, reload the page and then start
the workflow." when manually start a workflow for this List.
Tested workflow for other list, there's no problem.
Could anyone can help on this issue?

Batch rename stops working after initial folder

Similar Messages

Maybe you are looking for