Batch selection at the time of GR for Process Order

HI experts,
I have the following problem -
I have got a process order of 51, at the time of order creation I have assigned/created 2 batches for the process order using some development and making use of user field. Now at the time of GR after final confirmation, I want to select the batch number for the required quantity, i.e I want to do the GR for both batches, and I want to select the specific batch from the assigned 2 batches. I am facing a problem that , the GR by default selects the first batch of the order and the batch number field greys out. I am not able to select the second batch if I go for second GR of the same process order.
How can I make the field selectable , such that I can select the required batch at the time of GR.
Regards
A S K

There is a possibility to use batch split- kindly check if you are able to do this
Reg
Dsk

Similar Messages

Auto batch determination at the time of picking by transfer order

Hello,
Our problem is, at the time of creation of transfer order with reference to delivery, system can not pick up the batches automatically as per the SLED. We have to manually enter the batches as per the SLED. Could you please guide me step by step procedure of automatic batch determination as per SLED at the time of creation of transfer order with reference to out bound delivery? (Please state step by step procedure of automatic batch determination as per the SLED at the time of picking with transfer order)
Thanks
Milind

Hi,
As for remaining shelf life please check OSS note 33396, 72771. Additonally this may also help:
http://www.renet-web.net/2008/09/05/sap-batch-determination-made-easy/comment-page-1/
As for sorting according to SLED date please read OSS note 769036.
Regards,
Csaba

Batch selection at the time of 543 movement

Hi All,
This is regarding subcontracting process.
Whiles preparing 57f4 challan, we made a 543 movement with specific batch, now while taking GRN for same PO we need to select batch for 543 movement which system shows as FIFO defined in batch search strategy, but user can select any batches out of nos of batches.
We need that system should alllow only those batches which we issued at the time of 541 mvt.
Can anybody suggest?
Thanks
Nilesh M.
Edited by: Nilesh Malvi on Dec 23, 2010 8:21 AM

There is no way to exactly Map 541 batch with 543 batch .
Practically its not possible to determine and point that the 541 batch and 543 batch will be one and the same.
Once you have sent the material to the vendor, it is in his custody, and you cannot control in what order he has consumed the batches. Thats why we use FIFO method.
Only way is to enter the batch in the PO->Components screen itself.
check below thread
Re: Batch Determination - Sub contracting

Automatic Batch Creation at the time of GR for Customer Returns

Hi All,
We are using batch management with functionality of automatic batch creation for variuos movement type 101/103/105/561 etc. with updation of classification in foreground.
We are even using automatic batch creation for Inbound delivery. By configuring IMG object "Batch creation Control for Inbound"
Now we have a new requirement of automatic Batch creation for GR of Customer Return against Customer Return SO (Movement type 651). And updation of classification in foreground.
I have tried a lot but couldn't find how to configure the same.
Can I create GR custmor returns 651 thru transaction MIGO?
Any suggestion how to achieve this.
Thanks
Sanjay

Hi,
What Sairam said is correct, the idea of automatic batch creation is so that when you manaufacture or create an item you can allocate the characteristics to that batch and give it a number.
You then sell that batch to a customer.
When the customer returns the item the system should NOT automatically allocate a new batch number to it because this is breaking a VERY important audit trail.
In batch management (in some inductries more than others) it is VITAL to have a full audit trail of a bathc so that any problems concerning that batch can be traced back to their origin. What you are trying to do is to break that audit trail (although I can fully understand what you are trying to do).
I would leave the batch allocation for returns as manual and then when you transafer the item from returns to unrestricted (or quality etc.) tyou can then input the new characteristics.
Steve B

Progress confirmation for process order

Hello to all,
I want to use the progress confirmation functionality for process order. I know that it is possible for production orders, but I couldn't find respective transaction for process order. Do you know if it is possible to use progress confirmation for process orders.
BR,
Nikolay

Thanks for your inputs, but they are not useful!
COR6 - it cannot be used once the order is confirmed at phase level;
COOISPI - it's a report
COR6N -it is the standard transaction for process order confirmation
I want to do so-called "unplanned milestone" for process orders, something similar to CO1F for production orders.
BR,
Nikolay

Checking Rule for Process Order

Hi Guys
I am using the standard checking rule for Process Order while releasing. This rule considers the quality blocked stock also as available stock and thus release the Process Order.
However the client does not want to include the quality block stock for process order. My question is:
1. If I create a checking rule which does not consider quality stock as available, and attach it to release of Process Order, will it make any change in MRP run?
2. Is there a means to show a warning message while release of process order to show the stock is in quality block state?
3. Is there any other means to alarm or warn the user before release of Process order about the material quality block state?
Appreciate you help / suggestion on this
Thanks in advance
Rahul

Hi,
Regards the stocks during MRP run, you can do it in tow areas
1. In OPPI, you can define whether Stockin transfer/blocked/restricted stocks can be taken into account for MRP run.
2. You can exclude storage locations in MRP run and assign the MRP storage location indicator as 1 in MRP 4 view.
Apart from this the MRP will consider all stocks and requirements.
If you don't want to consider QI stock (for ex) then you can convert them as blocked stocks or you can move to a storage location which is not assigned to the MRP.
Thanks,
JK

Batch Determination at the time of Production Order Confirmation

Hi,
I am working with Batch Determination at Item Level.
I already have configured system to generate Batch Automatically at the Time of Production Order Release.
But now i want to generate Batch Automatically at the Time of Production Order Confirmation
Please help me with the necessary Configurations which would be required into achieving the same.
Thanks in advance.
Harris

Hi,
I have maintained the same for my Order Type in OPJ2 but still the same is not being picked at the time of Order Confirmation and it is being put to COGI mentioning the error as No batch specified in production order
Also if i try to Manually Select the Batch through in Goods Movt. of CO15 it is giving a msg that No Strategy could be found.
I have done following settings:
1. Have maintained Condn Records in MBC1 for the component whose batch is to be determined.
2. In material master in MRP2 Batch Determination: 2
3. In OPL8: Batch determination search procedure
4. In OPJ2: BD ticked for that relevant Order Type
5. In OPKP: Automatic Batch creation kept as BLANK.
Please support
Thanks
Harris

Automatic and manual batch determination at the time of Goods receipt

hi,
where i can have the settings for automatic and manual batch determination at the time of Goods receipt and goods issue..
E.g.: If i am receiving material from vendor then my requirement is system will generate batch automatically...
Where we can get this setting?
Tx
Uts

Dear,
You assign the batch number either
Manually
Automatically, using internal batch number assignment, refer to Customizing for Batch Management under Internal batch number assignment.
Internal batch number assignment is activated for the complete client, unless you exempt individual plants or materials using a customer exit (see Configure customer exits for intern. batch number assignment in Customizing for Batch Management).
The R/3 System informs you that the internal batch number assignment is active. You are however only informed once per transaction, for example, when you enter the first item on the multiple-entry screen.
Please refer: http://help.sap.com/saphelp_45b/helpdata/en/25/283cb44f7811d18a150000e816ae6e/frameset.htm
Regards,
Syed Hussain.

Automatic Batch Creation at the time of GR

Hi all,
I have configured automatic batch craetion in GR and same is working in Test client. And transfer the same to Quality but same is not working in quality.
I have checked all IMG object for batch are in sync. and I am clue less now what to do?
Thanks
Sanjay

Hi Gurus,
                  I have same issue system is supposed to assisgn batch
                 automatically at the time of G R but we are entering batch manually
                  Checked all suggestions from ramki
                   Is there anything else could cause this problem
                   Is this issue resolved
                   Please provide solution
                   Will reward full points
                                                             Rgds
                                                                         justin

Different batch no in prod order at the time of creation of prod order

Hi, we need different batch numbers in production order at the time of creation of production order. tried in system, i can able to create only one batch no at the time of creation of order. we need different batch no at the time of order creation and same no should be assigned at the time of GR from prod order. pls advise how to map this.

Dear,
Use the Exit EXIT_SAPLCOBT_001 under enhancement PPCO0001 where-in based on your requirement you can create batch for your order. You can use CALL FUNCTION 'VB_CREATE_BATCH' to create the batches as per your requirement.
Also make sure the automatic batch creation setting in Prodn Scheduling profile has been turned-off so that the batch is created only through the user-exit.
Refer this thread,
Re: Batch creation
Please try and revert back.
Regards,
R.Brahmankar

BOM selection at the time of confirmtion

Dear Experts,
My client has requirement that BOM should be selected at the time of confirmation if there are multiple BOM's are available for the same material.Is it possible ??.
Edited by: manjit_pune on Mar 7, 2012 10:07 AM

Hello Manjit,
As a SAP fucntion, BOM should be selected/exploded at the time of MRP so that SAP would be in position to plan the components accordingly. What the reason or benefit of selecting relevant BOM at the time of confirmation ??
In any case, this function is not possible in standard SAP.
Regards,
Anup

Auto Batch selection during GI for Process order

Hi Gurus
My requirement is that the system should select available batches of raw materials automatically during goods movement for Process order using COR6 and Goods issue for order MB1A . Could any body plz let me know the procedure in detail

Dear,
You need to define the batch search procedure MBC1 with serach strategy as ME01 for your material plant and movement type assign selection condition and sort rule and save the condition record.
Please refer this thread for details,
BATCH SELECTION DURING ISSUE
Please come back if any problem.
Regards,
R.Brahmankar

What is forwarded when " as in-line text" is selected in the drop-down box for forwarding a message. i.e. are attachments forwarded?

What is forwarded when " as in-line text" is selected in the drop-down box for forwarding a message. i.e. are attachments forwarded with the message or not?

Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
Back up all data.
Double-click anywhere in the line below on this page to select it:
com.apple.idms.appleid.prd
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
Credit for this idea to Christian Braukmueller of SAP.

For iPhone4 with iOS7, how can i see the time of day for a voice memo instead of the length of time for the recording?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

Issue at the time of creation of transfer order for inbound delivery

Hello,
I am facing one issue at the time of creation of transfer order for inbound delivery.
If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
Thanks and Regards,
Nikhil

Hi
In OMS2 t-code
for your material type and plant ,you have to mark value based and qunaity based updation mark
Regards
kailas Ugale

Batch selection at the time of GR for Process Order

Similar Messages

Maybe you are looking for