Batch - Ship-To party Relation

Dear experts,
Is it possible to assign different ship-to parties at delivery at batch split lines. (Material not taxable)
M1- 100 pcs when do batch split
9001- 50 pcs shipto party Mumbai
9002- 50 PCS ship to party Delhi
Is this possible in SAP?
May you please guide the importance of partner functions determination at delivery. Will this support my requirement?
Thanks & regards,
Deepu Pillai

Hi Deepu,
I do have a clear business requirements to split delivery and according to that new ship-to parties needs to be maintained.
     To repeat my reply,
       You will come to know about batch split only at the time of delivery creation. Where ship to is at header level, But you want to split the batch items according to ship to,
Header ship to will be copied in item  & cant be changed. Are you still expecting that this requirement is feasible or logical?
- Say, if Customer gives multiple Ship to party details according to batch, How you will come to know- how many batches line items are going to split in delivery? There is no way to predict the number of batch splits from Order.
I guess, you need to discuss about this requirement in terms of busienss ( not system point of view).
What batches are going to dispatch, Customer will never come to know or you will come to know ( until unless you run create delivery transaction that too foreground only).
Clarify above queries with the business.
Regards,
Reazuddin MD

Similar Messages

  • Bill-to-party & Ship-to-party relation table( for a perticular sales staff)

    Hi,
    I would like to extract Bill-to-party for a ship-to-party direct from table.
    Bill-to-party is different for different sales employee.
    Could you please let me know in which table these details are stored (I have checked in KNVP, unfortunately all the details are not available here)
    Appreciate your help

    goto VBPA (using your sales doc number as VBELN) and take KUNNR
    goto KNVP using the KUNNR from VBPA and set PARVW = 'BP' ('RE'). take the KUNN2  - this is a 'Bill-to-party'.
    for ship-to-party use PARVW='SH' ('WE')
    regards,

  • Ship to party and vendor relation in third party process

    Hello Experts,
    I need your precious suggestions on my business requirement.
    When we create the third party sales order system creates the Purchase Requisition and further PO is created through purchasing department.
    Suppose in my third party sales order I have two items X & Y, and both need to deliver at two different ship to party XXX & YYY respectively. in order system determine plant 1000 for both materials based on plant determination (CMIR >> CMR >> MMR) and system generates PR.
    I know while converting the PR to PO system check Source list (ME01) to determine the vendor. my requirement is I want to determine Vendor based on ship to party in sales order. suppose ship to party locations for XXX and YYY are Bangalore and Pune respectively and in both place we have different vendor. Both vendor manufacture product X & Y. so I want system should pick the vendor according to ship to party.
    Is there any relation between ship to party and vendor which will work in third party processing ?
    Kindly explain how I can achieve this requirement.
    Thanks,

    I doubt this can't be achieved by SAP standard functionality. You may need to use user exit. Check Third party to purchase req user exit or purchase req user exit to fulfill the requirement.
    Regards,

  • Assign different ship to party for each material in a sales order in CRM?

    Hi all,
    I need to create a sales order in CRM, such that the sales order contains more than 100 materials at item level and each material should be shipped to a different ship to party.
    That is for 100 materials in sales order I need to ship to 100 different customers.
    The 100 ship to partyu2019s are maintained for the business partner in relation ships tab in /nBP.
    The CRM configuration is done in such a way that when we enter a material while creating a sales order in CRM,u2026u2026.a window pops up asking us to select the ship to party for that material.
    No I need to replicate this programmatically. I generated a sales order in CRM programmatically using BAPI_SLSTRANSACT_CREATEMULTI. u2026 Now I need to make changes such that I have a provision to assign ship to party for each materialu2026
    How can I do this? Can any one tell me if there is a BAPI or Function Module available so that I can assign a different ship to party for each material in sales order?
    Regards,
    Jessica Sam

    Here is sample code. In that highlighted portion is different. check this out
    DATA: ls_partner TYPE crmt_partner_com,
            ls_input_fields TYPE crmt_input_field,
            lt_fieldname TYPE crmt_input_field_names_tab,
            ls_fieldname LIKE LINE OF lt_fieldname.
      ls_partner-ref_handle = p_iv_handle.
      ls_partner-ref_partner_handle = 1.
      ls_partner-ref_kind = 'A'.
      ls_partner-display_type = 'BP'.
      ls_partner-no_type = 'BP'.
      ls_partner-kind_of_entry = 'C'.
    licensee
      ls_partner-partner_fct = '00000069'.
      ls_partner-partner_no = w_but000-partner.
      INSERT ls_partner INTO TABLE gt_partner.
    Bill to party
      IF NOT w_con_header-billtoparty IS INITIAL.
        ls_partner-partner_fct = '00000003'.
        ls_partner-partner_no = w_but001-partner.
        INSERT ls_partner INTO TABLE gt_partner.
      ENDIF.
      IF w_con_header-billtoparty IS INITIAL.
        ls_partner-partner_fct = '00000003'.
        ls_partner-partner_no = w_but000-partner.
        INSERT ls_partner INTO TABLE gt_partner.
      ENDIF.
    Employee
      ls_partner-partner_fct = '00000014'.
      ls_partner-partner_no = w_con_header-empresp.
      INSERT ls_partner INTO TABLE gt_partner.
      +*lsinput_fields-ref_handle = p_iv_handle.*+_
      +*lsinput_fields-ref_kind = 'A'.*+_
      ls_input_fields-logical_key = ls_partner-ref_partner_handle.
      ls_input_fields-objectname = 'PARTNER'.
      ls_fieldname-fieldname = 'DISPLAY_TYPE'.
      INSERT ls_fieldname INTO TABLE lt_fieldname.
      CLEAR ls_fieldname.
      ls_fieldname-fieldname = 'KIND_OF_ENTRY'.
      INSERT ls_fieldname INTO TABLE lt_fieldname.
      CLEAR ls_fieldname.
      ls_fieldname-fieldname = 'NO_TYPE'.
      INSERT ls_fieldname INTO TABLE lt_fieldname.
      CLEAR ls_fieldname.
      ls_fieldname-fieldname = 'PARTNER_FCT'.
      INSERT ls_fieldname INTO TABLE lt_fieldname.
      CLEAR ls_fieldname.
      ls_fieldname-fieldname = 'PARTNER_NO'.
      INSERT ls_fieldname INTO TABLE lt_fieldname.
      CLEAR ls_fieldname.
      ls_input_fields-field_names = lt_fieldname.
      INSERT ls_input_fields INTO TABLE gt_input_fields.

  • User Exit Or BADi for Ship-to-Party's Transportation Zone F4 Help in VA01

    Dear Experts,
    I want to change the F4 help of Transportation Zone in Ship-to-Party Address in VA01.
    I have to show the possible entries from Z table which is compared by the city of that particular customer.
    Explanation:
    1. Go to Transaction VA01.
    2. Enter the values in first screen and Enter.
    3. select the sold to party and ship to party and Enter.
    4. Enter any item in item level.
    5. Press  Display Doc. Header ICON.
    6. Go to partners tab.
    7. Double click on Ship to party.
    8. One Pop up screen will open. (ie. Address from Master Data for Ship-to-Party (Document Header).
    9. Press F4 help for the field Transportation Zone. (It will show the possible entries from the table TZONE (All  records).
    10. I want to show the possible entries only for that particular city.(For a particular city there may be more than one transportation zone. I will maintain these records in Z table ).
    I have tried all user exit from the program MV45AFZZ and ADDRESS_SUBSCREEN BAdI. But I could not get the solution.
    Please help help me to do this.
    Thanks,
    Maruthamuthu

    Hi Sandeep,
    These are the user exits will trigger in va01 .
    SDTRM001 Reschedule schedule lines without a new ATP check
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0001 Update the purchase order from the sales order
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    V45P0001 SD customer function for cross-company code sales
    V45S0001 Update sales document from configuration
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V46H0001 SD Customer functions for resource-related billing
    V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
    Please check this and post .
    Regards,
    Madhu.

  • Ship to Party in Invoice

    Hi Friends,
    When we create an invoice with respect to delivery using standard copy control the partner function thats appear in the header is bill to party and payer. I want the ship to party also to appear in the partner function at header level.
    The copy control is having copying requirement 003 header del. related.
    Can someone please guide how can i achieve this.
    Regards,
    Wasim.

    Hello Wasim,
    That is SAP Standard. In Invoice header the Partner Functions visible are Sold-to, Bill-to & payer.
    Ship-to party is available at Line Item level in Invoice.
    The reason for this is - you can combine multiple deliveries (with different Ship-tp-Party) in a single Invoice. Thus in case like this one, Ship-to Party would be different for some line items in Invoice. So Ship-to-Party is available only at Line Item Level in Invoice.
    If there at strong Business need to view Ship-to-Party in Invoice at Header Level? If yes, then follow the suggestion given by Prasanna above & it will get solved. But frankly speaking I dont see any need for Ship-to-party at Header level in Invoice.
    Hope this helps,
    Thanks,
    Jignesh Mehta

  • How to create ship to party and sold to party for DC10 during sales order ?

    Hello all:
    When creating sales order for a material in VA01 with sales Org 1000,
    distribution channel 10, division 00
    The system does not give me any Ship to Party and Sold to Party with the above combination
    How to create ship to party and sold to party with the above combination (Plant 1000,
    sales org 1000, distribution channel 10, during creation of a sales order
    Ironically, when creating material master for a material with a material type KMAT, plant 1000
    sales org 1000, the only distribution channel is populating in the input help (F4) is 10
    For which no ship to party neither sold to party is maintained in sales order creation
    Thanks in Advance!!

    Dear Eshwer
    It is bcoz, the said account groups (Sold To Party and Ship To Party) are not created in the sales area 1000 / 10 / 00.
    To create a customer master, you have to go to XD01, select the Account Group, Company Code and the respective Sales Area and execute.  In the Customer Master, you have three tabs, viz.General Data where you have give address details of the customer, then in Control Data, you have to assign the respective Recon Account and in Sales Area Data, you have to maintain the customer's sales related details.  Once you give all these datas and save the data, a customer code will be displayed at the bottom.
    Now go to VA01, input the sale order type and the sales area and execute.
    thanks
    G. Lakshmipathi

  • Ship-to party and description...

    Hello Experts,
    I am currently getting the ship-to party and description of a given sales order
    through table kna1 where the kunnr is equal to the current kunnr of the delivery order(likp-kunnr).
    Now, is there any other way to get the ship to party and its description(like in VA03)?
    Thank you guys and take care!

    Hi
    Pass the sales Doc no or Delivery Doc number to <b>VBPA-VBELN</b> field
    and take the related Partner Number based on partner function
    So with that number
    you can take the name from<b> KNA1</b> table
    Reward points for useful Answers
    Regards
    Anji

  • Ship To Party issue in Sale Order

    Hi,
    when i trying to choose another ship to party on header of a sales quotation . system is giving me error
    "Top node 0011000560 for ship-to 0011000845 not maintained or ship-to is not valid"
    I have maintained the 2nd code as ship to party in customer master of the 1st.
    Please advice.
    Ankur
    Edited by: Lakshmipathi on Jun 3, 2011 12:07 PM
    Please use the subject effectively

    Dear Ankur,
                  I hope you created a new ship to party in new account group,now what you have to do is assain this ship to party no to your customer (sold to party) change mode,sales area tab there in partner functions there menction one more SH and give the ship to party no and save the customer master.Then while you crating the quatation or sale order once you enter the sold to party system will show the pop up to select the ship to party then select the related ship to party.
    Thanks and Regardds
    Vinayk

  • How I can to download sold-to-party and ship-to-party with the relationship

    Hello,
    I want to know how I can to download sold-to-party and ship-to-party through Middleware form R/3 to CRM and kept the relationships just as be defined in R/3
    When I downloaded a sold-to-party or a ship-to-party to CRM, they created in CRM as BPs without the relationships.
    How can I do this?
    Thanks and Kind regards,
    Ohad

    Hi,
    I downloaded "BUPA_REL" object, only the Contact Persons was downloaded,
    But is not relation ship to party with sold to party.
    So it's not solve my problem,
    Please help me.
    Thanks and Best regards,
    Ohad

  • Sold to Party and Ship to Party Function module or BAPI

    Hi Experts,
       1) I need to create customer data,So i need to Function module or BAPI.
       2) Address create data Function module or BAPI.
       3) Sold to Party and Ship to Party Function module or BAPI relation ship.
    Thank you ,
    Dinesh Reddy
    Moderator message: anything else? please search for available information before asking.
    Edited by: Thomas Zloch on Oct 14, 2011 3:19 PM

    Hi,
      Try these Bapis
    BAPI_BUS2001_PARTNER_GETDETAIL Get Detail Data for Partner Data
    BAPI_BUS2001_PARTNER_GETLIST   Get Overview List for Partner Data
    Regards,
    Prashant

  • ORDERS 05 idoc sold to and ship to party?

    As far as i know the ORDERS 05 idoc is for sales order which we get from the customer who wants to but products from our company.
    In the idoc there is a segment E1EDKA1 contain sold to party and ship to party fields. What is the significance of these fields? What values are filled for these fields? Are these 2 fields also part of any other idoc?
    In real time from xi point of view from which system to which system this data will move?
    I have checked few documents on sold to and ship to party but ended up getting more confused.
    Please help me with the answers.
    Regards,
    Suresh.

    Hi Suresh,
    The Sold to and Ship to party details from posted IDOC type ORDERS 05  are not at all in relation with the data moving from XI to whcih are sender and receiver systems.
    You are right as the ORDERS 05 is used for Sales Order.
    While creating the sales order we need to specify the Sold to party and ship to party information. this gives the information about the party against which you have generated the sales order and the the ship to party will indicate the location specific branch of the customer party.
    For.eg. the customer will be requesting for the sales order and he wish to deliver the order at his particular branch then Sold to party--Customer No and Ship to party i.e. Location specific details are required.
    Thanks
    Swarup

  • Rev account determ based on customer account assign group of ship to party

    Hi
    In our company revenue account gets determined based on Sales org/cust acc assignment group / mat acc assignment grp / Dest Cntry / ActKy (VKOA table 502) . Customer account assignment group and Dest country are from sold to party customer account assignment group.
    Our client wants these to come from ship to party rather on sold to party, I checked fields and tables in SPRO-> sales & dist  How can we achieve this?
    Thanks,
    Vaishnavi

    Hello,
    As per my knowledge, the Dest country, Shipping Address & other shipping related data are determine from SH-Ship to party.
    Whereas, pricing & shipping condition related data are determines from Sold to Party.
    To add 501-Sales org/cust acc assignment group / mat acc assignment grp / Dest Cntry / ActKy for your VKOA is not a standard table. check the same using tcode in V/14.
    Thus, I like to conclude by stating that the Destination country is actually is determined from Ship to Party, not Sold to Party and the table suggest/maintain is the best solution to your customer requirement.
    Thanks & Regards
    JP

  • Change of ship-to party right before dispatch on delivery (not order)

    have a client that consistently has to change the ship-to party right before dispatch. the client has customers that are dealers, who in turn have sub-dealers. the dealers very rarely accept shipment to their address, they want the delivery posted to the sub-dealers and this can change at the last minute. as of right now, the addresses for sub-dealers is not maintained by the client, but they would like to have this option.
    i would like to maintain the address of the sub-dealers. but once the delivery document is created the ship-to party is greyed out, how would i change this, so i can enter a new ship-to party? the address changes last minute, but after the delivery has been created.
    thanks in advance!

    Hi
    In standard SAP it is not possible.
    Once , you create a Delivery document, you can not change the Ship-to-party. Ship-to-party is a Header data in Delivery.
    If you want the change then you have to delete the Delivery.
    Make your client understand that it is not only Ship-to-party, so many other  related data will get redetermine once the Ship-to-party is changed.
    For example, When Ship-to-party is changed, Route will be redetermined, Tax will be redetermined, partial delivery agreement may be different etc.
    The new Ship-to-party may have a choice of different Plant also.
    Normally, the above data are determined in Sales order, therefore you can change those in Sales order only and NOT possible to change in the Delivery document.

  • Sales Order ship to Party Issue

    Dear All,
    we have sold to party with multiple ship to parties,
    The ship to parties are assigned to the sold to party master data.
    But when creating the sales oder we enter ship to party and the sold to party is found automatically,
    But the system is allowing to enter ship to party from some other sold to party.
    Hence the order  is having different sold to party and different ship to party which is wrong
    kindly advise
    Mohammed Raees
    Edited by: Raeesuddin Mohammed on Jun 21, 2011 12:27 PM

    Hi,
    I had a similar requirement wherein we had more that 1000 ship-to parties for a sold-to and had to validate that the same sold-to is determined when a particular ship-to is entered in the order. This is how I had resolved it.
    1. First, create a new partner function for eg. ZL having the account group of the sold-to.
    2. Assign this partner function ZL (sold-to) in each of the ship-to's (customer master) you have.
    3. Then you need to write a code in the user exit MV45AFZZ with the logic as; READ the table KNVP to get the sold-to with the ship-to party; the sales area (you should be getting this as it is in the save user exit) and the partner function= ZL.
    4. If sy-subrc=0; then read the KNPV with the sold-to got above, partner function = ZL, sales area and the ship-to.
    5. If sy-subrc=0; the display a error message "the ship-to party does not relate to the sold-to party".
    6. Else, the sold-to got is related to the ship-to and the normal logic proceeds further.
    This way I think you can restrict only those ship-to's to be used related to the particular sold-to.
    Regards,
    Sampat
    Edited by: Sampat Vijay Sadalge on Jun 21, 2011 1:25 PM

Maybe you are looking for