Batch wise Inspection results details

Dear QM experts,
Is there any table / Report which give Batch wise quality details, like out of 1000 inspected Qty, 900 is Quality OK, 50 is Rejected, 20 is re test, 10 in in inspection like this....
Please suggest.
Thanks in advance.
Best Regards,
Sitarami Reddy

Hi
Make a layout in QA32. Am not sure about your exact requirement. As this seems to be a simple report you can get it in QA32. If not go for SAP query & make your ad hoc report.
Dinesh Krishnan

Similar Messages

LOT WISE INSPECTION RESULT

IS THERE ANY STD REPORT LIKE THIS MATERIAL AND LOT NO RESULTS MATERIAL NOT SUBJECT TO BATCH MANAGEMENT CAN ANY BODY KNOW KINDLY GUIDE ME

Are you just trying to see what materials are not batch managed? I'm not sure I followed exactly what you wanted.
You should be able to just get that from SE16.
FF

Batch Wise Product Cost Details

Dear Experts,
I have a requirement where my client (pharmaceutical industry) wants to analyse costs according to batches.
For Example if I have raw Material A with three batches 1 , 2, 3 Each batch is procured with a different purchase price.
Next these batches are consumed against a process order . If I want to analyse which particular cost of raw material batch was consumed ? how can i find this out .
I know in MM if we go with MAP price will be averaged out and in standard price all three batches will have same price.
Also we can go for split valuation but inventory is already available and SAP is not allowing me to enter Valuation Category in material master record.

Hi,
Split valuation will be the best option. You can check the concept of split valuation with batches. Refer the help doc: Split Valuation with Batches - Batch Management (LO-BM) - SAP Library and the wiki doc: Split Valuation - Valuation Category &quot;X&quot; - Contributor Corner - SCN Wiki
If you want to activate split valuation for already existing material, the system checks the points mentioned in the note: 155874 - Change valuation category in material master to avoid inconsistency. You may check the points mentioned and close the documents. You may remove the stock temporarily by issuing against cost center in MB1A (or similar) and then activate the split valuation. After activating split valuation, you may reverse the stock. Else, you may create new material code and discontinue the existing material code.
Regards,
AKPT

Inspection result to multiple batches

Hello,
For my client, I need to figure out a way to get the inspection results from QM into multiple batches. Is there a simple (standard) way to do this?
The situation is that my client produces 3 batches at once. Samples for analysis are only taken from 1 of those 3 batches. After the analyses, at the usage decision, the values need to be copied into the characteristics of all 3 batches.
Anyone can help me out with this one?

Hi,
That means you have only one inspection lot(manually created) for the production of 3 batches. But you can link only one material/one batch to an inspection lot in SAP. In your case, you can record the results for 1 batch and maintain the other batches in text field(that Inspection not required for other 2 batches).
By the way which inspectin type are you using?
WR,
Sanjeev

QM Inspection results transfered back to batch

Experts,
after taking a usage decision, I want all inspection results to be transfered back to the batch.
But if a result is out of spec, it gets a negative valuation, then I get the warning 'batch could only be partially valuated' and the result of this char is not writte back to the batch.
How can I have also the negative results recorded in the batch?
Thx

In the batch level make sure that any value you are giving will be accepted.
master data required
Batch and batcth charectristics
MIC- copay from batch charectristics
Material specification with same MIC's.
Quality plan with same MIC's.
In the batch charectistics make sure that the range is more tahn that in MIC so that any value is taken or in batch chereristics -check box - aditional value allowed in value tab page is active.
With this setting you should be in the position to get the results

Problems with inspection result transfer to batch classification

Hello ,
I `m struggling with the following problem: As result of UD I want to transfrer the inspection results to the batch class (evaluate the batch by the results of inspection). the correct batch class characteristic is assigned to the master inspection characteristic.
It works fine, but only if I maintain a material specification for the material which includes the characteristics I want to get valuated automatically.
We are using only inspection plans, we do not work with material specifications for quality inspection. In the inspection settings of the material master data only 'inspection with plan' is marked, 'material specification' we keep empty.
I do not believe that I have to maintain the material specification in order to get results transfered - But Am I wrong?
If it is possible to get the results transferred without a maintained material specification - what is wrong with my settings? what do I need to change in order to get the process running well without that material specification nobody wants to maintain?
Thanks in advance for all helpful hints.
Kurt

Hi
Go to QCC0>Basic Setting>Setting at plant level--->select plant ->Inspection lot completion->Batch valuation without material spec
check indicator.
If you set this indicator, a link between the master inspection characteristics and the class characteristics for the batch class must exist when an inspection lot is created, for batch valuation to occur when the usage decision or inspection point valuation is made. A link within the material specification is not required.
If you do not set this indicator, batch valuation only occurs when the usage decision or inspection point valuation is made, if a link using the material specification exists between the master inspection characteristics and the class characteristics for the batch class. In this way, you can control on a material-dependent basis whether the batch characteristics are valuated based on the inspection results.
Regards'
Sujit

Copy Inspection Results of one lot to other lots at a time

Dear Experts,
As per settings made under "Make Settings for Copy of Inspection Results" I am able to copy inspection results but still I am not getting what I exactly want. Below are different requirements explained in details
1. I am not able to copy twice on the same lot. e.g. if a lot has status RREC i.e. RR has been done then if at a later time I want to copy some other results over here then it's not happening.
In help.sap page somewhere it is mentioned that copy is possible if lot has status CALC. I want to have some configuration which I don't know for which SAP should allow the copy functionality with status RREC also.
2. By above functionality I want to do RR for several lots collectively at a time. E.g. if I have 100 lots then with same quality results it's tedious to copy results for each one by one. Like "QA16 - Collective Usage Decision" I didn't find any similar transaction for results recording(collectively).
3. Although my results are being copied from one lot another but MIC valuation are not being transferred given that I am not using any sampling procedure. I want manual valuation to be copied to the destination lots.
Any valuable suggestion will be highly appreciated.
Regards,

Dear,
it is not clear from your question.
Please get more details,
In which release you are working?
In SPRO what special setting you made for this special case
Inspection origin is linked with no range/TL type/insp type.
Wher exactly you set this new configuration.
Please let us know so that we can simulate and help you out

QM inspection result reports

Experts,
How come there is never any data for QM reports such as MCXA, MCXB, MCXD, MCXI although inspection lots are available in the system?
Is there another report that I can use to see inspection results in a table layout, e.g. list of batches on one axis, list of characteristics on another and the results?
Thanks!
Rgds

Sure you can. Simply add some of the standard characteristics to the batch class that SAP provides.
LOBM_APO_SL_MAX     Max shelf life/maturity in sec
LOBM_APO_SL_MIN     Min shelf life/maturity in sec
LOBM_APO_SL_UTC     Reference time stamp of batch
LOBM_BPRIO     Stock determination: priority
LOBM_BWTAR     Valuation type
LOBM_HERKL     Country of Origin
LOBM_HSDAT     Date when batch was produced
LOBM_KRT     waiting period of a batch
LOBM_LFDAT     Batch determin. delivery date
LOBM_LGORT     Storage location
LOBM_LVORM     Deletion ind. for batches
LOBM_MBDAT     Material availability date
LOBM_MENGE     Batch determination sort qty
LOBM_QNDAT     Next insp. date for batch
LOBM_QSCORE     Qualityscore Usage Decision
LOBM_RLZ     Remaining shelf life for batch
LOBM_RLZ_PROZ     Req. remaining rntme in proc.
LOBM_UDCODE     Usage Decision
LOBM_VERAB     Availability date
LOBM_VFDAT     Expiration date, shelf life
LOBM_ZUSTD     Status of batch
Not all of these are suitable to add to the batch class. Some are designed strictly for batch search strategy classes. There are several OSS notes out there on the use of these. As you can see, several of these are date related. I usually always add LOBM_HSDAT, LOBM_UDCODE,and LOBM_VFDAT.
As you can see, the Batch number is not in the list of standard characteristics. This can be created however. Create a general characteristic with reference to table MCH1, field nanme CHARG and add this characteristic to your classes. You can then use it to search and sort for specific batches just like any other characeristic in CL30n. When displayed, the field is greyed out from user entry since it is a referenced field.
Craig

Inspection results for more than one lot

How do i see inspection results for different lots of the same material together in a single screen. Is there any standard report or query available in SAP?
Prahlad

Dear Prahlad
You can see it in ways
1) Go to QS28. Input the plant and the mic and execute. You will get MIC details. Choose the MIC and click on Result history. A pop will appear Result history Limit Selection. In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots
3) Go to QA33 > result> Select the Mic> go Result historyhistory >In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots with all values and charts
4) standard reports such MCXD,QGP1 can be used
Hope this helps
Regards
gajesh

Inspection Results Listing

Hi Experts,
After inspection results being inputted, is there any standard TCODE in SAP which can list out the inspection results in detail (1 by 1)?
And also any program for listing what results required to be inputted but not yet inputted?
Thanks a lot!
Regards,
Daniel

Have you tried
MCXV
1
apart from QA32/QA33
Edited by: nbgore on Mar 31, 2011 2:14 PM

Copying Inspection results from inspection lot.

Dear All,
Please explain me the process of copying inspection results in QM. Following is my clients requirement:
During receiving inspection they receive the same material in say 10 batches (coils). They want to create the independent batch for each coils of same material for tracking mechanism, so I don't have any option to generate that many number of lots.
Out of this 10 lots, say there are 2 masters (mother coils). Means there are two set of characteristics only which i need to copy for 5 lots each.
As I learn from SDN, EA - PLM need to be activated . But I don't know what are the adverse effects of activating same.
Please explain me the process.
Best Regards.
Shekhar Mokashi

Hi Shekhar,
Refer the OSS note 855959 - Activation of Extension Sets via SPRO not successful.
I think all your doubts regarding to this Enhancement package will get resolved.
The big warning is given there in that note itself about implementing the EA-PLM enhancement is.....
Once an Enterprise extension set has been activated, it cannot be de-activated by de-selecting the option in the SPRO or otherwise, because BC Set activations cannot be undone.
Appart from that note refer the document for
Release Notes
SAP ERP Corporate Services
SAP enhancement package 2 for SAP ERP 6.01.
the link for the same is pasted here FYI.
[Chap_04_RNCorporateService|http://www.id.uzh.ch/dl/sw/sap/upgrade/Chap_04_RNCorporateService.pdf]
Even after this much stuff completion, you don't have your doubt cleared up then I would advice you to ask the question in [ SAP Enhancement Packages|/community [original link is broken]; forum.
Regards with lots of good luck wishes.
Shyamal.
Edited by: Shyamal Joshi on Jul 26, 2008 12:19 PM
Edited by: Shyamal Joshi on Jul 26, 2008 3:06 PM

Copy inspection results

Hi,
In QM i am trying to copy inspection results. For that all required customizations maintained, but still
copy inspection results option is not coming in EDIT tab of QE01 transaction.
I have cheked the pf status for the same it is E110 and main program is SAPLQEEM and in se41 under edit tab i am able to see the data transfer push code also +QECOPY, but it is not appearing at transaction level.
Do i need to do any coding to activate the same. Any help will be highly appreciated.
Thanks a lot in advance.

Hi,
Are you able to see "copy insp results" in QA02 under Edit menu ?
Ref the link for details reg copy insp results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun
Edited by: ARUN KM on Mar 24, 2008 4:22 PM

SAP QM Result recording - Copy inspection results functionality

Dear all,
I have two queries.
1) The Raw materials used in various plants are same. I want to copy the inspection results to the inspection lot if the batch is already accepted in other plant. The material, batch and vendor is common point. Some of the characteristics are caluculated characteristics. How to map this requirement.
2) I want to test the standard functionality for copy results but in my system, the settings for copy inspection results is not appearing in quality inspections in SPRO. I want to confirm whether I am missing some other setting.
Regards,
Manohar

Hello Jessica,
you could try the following bapis:
BAPI_INSPCHAR_GETRESULT
BAPI_INSPCHAR_SETRESULT
Although the desired functionality was actually implemented in higher releases.
Hope this helps you.
Regards,
Isabelle

QM: Copying inspection results to another lot

Experts,
has anyone experience with automatic copying closed inspection results from one inspection lot to another one?
Rgds

Having seen some of your other postings and queries I'm wondering if your issue can't be solved by batch derivation or batch characteristic inheritance? These are available in 6.0. Not sure of your version. By using these functions, you can avoid creating a lot of your inspection lots possibly.
You can read up on these at:
Batch derivation: http://help.sap.com/erp2005_ehp_03/helpdata/EN/35/7b723c4356d068e10000000a114084/frameset.htm
Batch characteristic inheritance: http://help.sap.com/erp2005_ehp_03/helpdata/EN/3e/a6d5b1a3f5764e8274e015d5a1cee2/frameset.htm
Craig

Reg: Copying inspection results from inspection( 04) to inspection type (!0

Dear Friends ,
I have configured for Quality certificate.
At the time of delivery , the system will create an inspection lot.
To make delivery we need to carry out RR and UD once again.
Can we copy inspection results of inspection type (04) to inspection type 10 , as we are maintaining the same results of inspection type (04). Also can we sit as background whenever a lot is created with lot origin(10) , automatically it has to copy the results from inspection type 04 .
Thanks in advance.

HI Dear,
As you said , it is for COA.
And the materials are not batch manged.
Is there any possibility of copying the results of 04 inspection lot to inspection type 10 lot , which is created at the time of PGI.
Because untill and unless RR and UD is made sales people will be not able to make the delivery . if there are multiple lots , it takes
time for them to carry out RR and UD.
Thanks for your reply!!!

Batch wise Inspection results details

Similar Messages

Maybe you are looking for