Batter Error 601

Sir i have a problem in my battry from tomoorow nght... A problem is that when i unpluge a charger then my system is off and again i conect a charger then srcreen message seen... (Battery error 601) i dont understand that whats happining. plz help me

Hi,
Please use the following instructions to check:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00821536
If failed, you have to replace the battery.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

I am receiving an error message when I start my laptop HP G62 Internal battery error 601? What ?

I am receiving an error message when I start my laptop HP G62 Internal battery error 601? What does it means please provide me solution ASAP

Israr,
Then error indicates that the primary battery (the one you can remove and replace) has a hardware failure. You should run Battery Check in HP Support Assistant.
Wes
I am an HP employee.

SQL error "-601" occurred when accessing table "SMEN_BUFFC

Hi Guys
I am getting the above error at tiem when i am logging on.
The actual error message in the st22 dump is
Database error text........: "SMEN_BUFH5 in R3EPT32000 type *SQLPKG already
exists. Job=018343/EPT01/WP00"
The termination occurred in the ABAP/4 program "SAPLSMTR_NAVIGATION_MODULES "
in
"SMTR_STRU_PROCESS_STRUCTURE".
The main program was "SAPLSMTR_NAVIGATION ".
This seems to happen when some users log on to the system and then tries to change their password. If I stop sap and start it again, the rror goes away.
I have actually deleted the sql package with the command
DLTSQLPKG R3EPT32000\SMEN_BUFH5.
This seem to work but after a while the erro comes back again

Dear Christian,
at the moment in our Productive system we have hundreds of Dumps: nearly at every log on user get a DUMP with the well known message.
Analyzing develoepr trace we find following information:
C Wed Mar 14 09:54:35 2007
C Concurrent prepare happened for SIPID
C Library name: R3S1132000
C Package name: SMEN_BUFH5
C Statement name: "QL1YQAAAAAFC"
C SQL Error: -601
C *** ERROR => Error -601 in function prep_cached_op [dbsldb4.cpp 7057]
C Library name: R3S1132000
C Package name: SMEN_BUFH5
C Statement name: "QL1YQAAAAAFC"
C Failing statement is:
C , SELECT   *   FROM R3S11DATA/"SMEN_BUFFC" WHERE "MANDT" = ? AND "UNAME" = ? WITH UR
B ***LOG BY4=> sql error -601   performing PRE on table SMEN_BUFFC [dbtran 7009 ]
B ***LOG BY0=> SMEN_BUFH5 in R3S1132000 tipo *SQLPKG esiste gi{. Job=251690/S1100/WP12 [dbtran 7009 ]
B dbtran ERROR LOG (hdl_dbsl_error): DbSl 'PRE'
B   FHDR: {tab='SMEN_BUFFC                    ',
fcode=53, mode=2, bpb=0, dbcnt=0, crsr=1,
B          hold=0, keep=1, xfer=2, pkg=0, upto=0, init:b=0,
B          init:p=0000000000000000, init:#=278, wa:p=0000000000000000, wa:#=278}
B dbtran ERROR LOG (hdl_dbsl_error): DbSl 'PRE'
B   STMT:
B   CRSR: {tab='SMEN_BUFFC                    ', id=-1, hold=0, prop=0x10000, max.in@0=1, fae:blk=10,
B          con:nm='R/3', con:id=0, con:vndr=2, val=2,
B          key:1=0, key:#=6, xfer=2, xin:#=0, xout:#=0, upto=0,
B          wa:p=000000800440C380, init:p=00000090D4CF4DF8, init:#=15, init:b=0}
Additionaly we also tried to delete only mentioned SQL package (while system was running), but without succes.
What do you think?
Giuseppe

Error installing SAP NW 7.01 ABAP trial version /Error 601-Need Expert Help

Hi
When I install the trial version, the installation aborts with error 601.
I know this has been reported before, but I can't find a solution, tried removing all previous entries/components and re-installing a number of times but it always aborts.
Details below, any help would be greatly appreciated:
1, 2009 1:28:02 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Nov 11, 2009 1:28:02 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/SM/LOCALS1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/SM/LOCALS1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

I did these steps and was able to reinstall without any problems.
1. Run registry clean tool that came with the packaged software
     \Additional_Tools\RegCleanTool
2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
     This is under the Software Life-Cycle Options-Uninstall
3. Check if there are any files located in
     \Program Files\sapinst_instdir     -
     delete this directory
     \Documents and Settins\{user}\Local settings\Temp    -
   delete any references to SAP
The above steps helped me to reinstall the Trial software.
Make sure that the system for the install meet the following requirements:
u2022     Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
u2022     Hostname must not exceed 13 characters
u2022     NTFS-File system
u2022     Internet Explorer 5.5 or higher or Firefox 1.0 or higher
u2022     At least 1 GB RAM (2-4 GB recommended)
u2022     Pagefile size according to your RAM settings.
u2022     Intel Pentium III/1.1 GHz or higher (or compatible)
u2022     30 GB hard disk space temporary during installation - 24 GB permanent
        The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
u2022     High-resolution monitor (1024x768 or higher, 256 colors)
u2022     Make sure that no other SAP system is installed on your computer
u2022     The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
u2022     If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
My system configuration:
Virutal Machine
   Windows Server 2003
   1.7GB RAM
   20GB System Drive
   40GB Data drive (SAP installed here)
    MS Loopback Adapter with address 10.10.0.10 (entry in hosts file 10.10.0.10             localhost)
Regards,
Jasper

Internal battery problem error 601

while startup laptop message comes internal battery problem change battery. error 601. what to do now??

AshuSharma wrote:
while startup laptop message comes internal battery problem change battery. error 601. what to do now??
Hi,
There is a solved thread on this page about this error. The solution is to replace the battery because its storage capacity is low. The right part number can be found in a maintenance and service guide. Go to Support and Drivers page, enter your model and look in User Guides section.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

PMON: terminating instance due to error 601

Under a heavy workload, Oracle crashes very quietly with only a few lines in the alert file:
PMON: terminating instance due to error 601
Instance terminated by PMON, pid = <pid>
the only other message is a PMON message:
*** 2000-08-10 13:35:15.329
error 601 detected in background process
Any tips?
thanks,
Will

I've had the same problem. I went to dedicated servers (not using MTS) and the symptom has not re-occured. Oracle is aware of the problem and is working on it.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Will Gullickson ([email protected]):
Under a heavy workload, Oracle crashes very quietly with only a few lines in the alert file:
PMON: terminating instance due to error 601
Instance terminated by PMON, pid = <pid>
the only other message is a PMON message:
*** 2000-08-10 13:35:15.329
error 601 detected in background process
Any tips?
thanks,
Will<HR></BLOCKQUOTE>
null

Battery Error 601 and Notebook will not boot

My notebook will not bootup anymore. It was running fine then I just closed the screen and went to class. Usually this just puts it to sleep. When I opened it back up, it would not start... It was totally dead. When I plug it into the charger, I see a "Pimrary Battery Error" 601 displayed for a few seconds and then it starts to bootup. It never fully boots-up, it shuts off totally before I get past the little HP splash.
When I plug the charger into the notebook, I see the charging orange LED for a little while, but then it switches to white and then back to orange and then totally off. I have tried multiple chargers and it always does the same thing.
Since the notebook will not boot even when plugged in, I am suspecting something in the charging system/main board more than the battery. Is there anyway to tell which components are bad?
This is an almost 2 year old Envy 4-1215dx, Product ID: D1A99UA#ABA
It's been a great notebook upto now... Any ideas on what to check and how?
Steve

Here's a link with an explaination and troubleshooting steps for the error you are experiencing.
HP Battery Alert
You can also try a Hard Reset in order to get you PC to boot long enough to run a diagnostics.
Hard Reset
You may also try with the battery removed and just the AC Adapter.
If nothing seems to work you can always try a new main battery since they usually are fairly inexpensive. Just Google the Part# shown on your battery.
If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!

Database error -601

Hello all,
I have a problem with my QAS System. In SM21 the message "Database error -601 at PRE access to table DKCLU" appear.
I was searching in service market place for a notes and I found note 579952 but is too old.
This is the complete message from sys log (I clean some data):
SESS|AB0|Se ha producido error tiempo ejec."DBIF_RSQL_SQL_ERROR"
SESS|AB1|> Se generó dump breve "071203 095039 OMXSAP JCM0023628 "
SESS|BY4|Database error -601 at PRE access to table DOKCLU
SESS|BY0|> DOKCLUIH in R3QAS42060 type * MSGID= Job=271314/QAS20/WP00
SESS|BY0|> myCluster: DOKCLU myKey: TX*COPYRIGHT_SAP
SESS|BY0|> SE*0004 |
SESS|R68|Ejecutar rollback
I have to mentioned that OS Admin was deleting some libraries but not sure what.
Thanks a lot.
Jorge Cruz

Hi Jorge,
I hope your system admin did not delete the temp SQl packages.
The best thing would be to stop the system and delete all the SQL packages form the R3MAIN menu by usng option 4--option 5 and then delete all the packages and restart the system and see if that helps.
Let us knof of the results
Thanks
Abhi

Error message for my torch 9800 - app error 601

My torch now has an error message of app error 601... what does that mean please help I'd really appreciate it

danmunsayac wrote:
My torch now has an error message of app error 601... what does that mean please help I'd really appreciate it
Hi danmunsayac,
Read this article about Error 601 "App Error 600" or "App Error 601" is displayed on the BlackBerry smartphone
Hope this helps. Good luck!
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Cannot create multicast session in C1, error -601

When trying to create news multicast session on C1, it gives Error -601
"the object name entered could not be found in the context specified".
This happens on multiple Zen Servers.
C1.3.6h, zdm7.0.1 snapins.
I already tried cleaning up the "hidden" sessionobjects, no help.
Other ideas?
-sk

Hi,
Sami Kapanen wrote:
>
> When trying to create news multicast session on C1, it gives Error -601
> "the object name entered could not be found in the context specified".
That usually points to eDir errors, or at least severe delays in sync.
You can try to use the -forcemaster switch of ConsoleOne to make sure
it's always talking to the master of any partition only, but if that
helps, I would check my eDir health and sync times.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Several Problems - 9300 - Rebooting / Error 601 etc

I've had my Curve 9300 for about a year and it's started doing the following
1. Keeps rebooting at complete random intervals. Sometimes it can be on for a while and be fine, then it reboots. sometimes it reboots as soon as it recovers from a reboot. It also seems to reboot whenever i DO anything. If I delete an email it reboots. If I open something basic and it has to load something, it appears to fail doing so and reboots.
2. The trackpad (which i've replaced) stops working now and then - the only thing it lets me do is press it down to select things. To get it working again I have to hold it down to bring the "select options" for whatever im hovered over, then fiddle around with it.
3. I've tried reinstalling an older OS for the phone, via instructions on this forum, but it still says I'm running the same OS I was before the reinstall (I deleted the Vendor.xml file before doing it)
4. Then I try deleting everything on the phone, and as soon as it gets to WLAN Profiles, the phone crashes saying "App Error 601 - Reset"
I'm at a complete loss what to do.
Please help!

Hello,
This KB discusses the 601:
KB23665 "App Error 600" or "App Error 601" is displayed on the BlackBerry smartphone
But, I would suggest you re-attempt the OS reload...something did not go correctly with that, given what you reported.
At the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error 601

My wife just got a new (refurbished) 9670 (sprint) two days ago and it is already freezing up on her. It froze today when she was ending a phone call and closing the phone. It displayed an error code 601. Best as I can find that error is for an email app error but heres my question. She does not have any email accts set up on the phone she does not use the phone for email at all so why would this error code come up?

Hi Hot_dog
The following article should help you with the App Error 601 you are seeing on your BlackBerry® Style™ 9670.
KB23665 - "App Error 600" or "App Error 601" is displayed on the BlackBerry smartphone
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Hp pavillion dv6z-1100 Internal Battery error 601

The Internal battery was replace with a new 3v.
After cmos battery was replace, the error continues to come up!
error 601.
Also ,my hard drive went bad, i plan to replace the hard drive with WD3200BEVT SCORPIO BLUE MOBILE
HARD DRIVE 320MB AND INSTALL OPERATING SYSTEM.

I am getting the same error. Laptop is only 2 years old. On startup, I get the message and the request to press enter to continue, but then I get a low white to gray screen and it does nothing. So I force power off and at this point I don't konw what to do. If it were the external battery, why would this computer not run on the power cord? My Dell laptops will run without a battery, just using the power cord for electrical supply. I recently replaced the power cord, since the one that came with the laptop failed (I understand this is a very common problem for this model).

Internal Battery Error 601

Hello
Am using HP Pavilion dv6-3057tx for past 4 years now i got error regarding Internal Battery Error 601
and asked me to press ENTER. Today mrg onwards the laptop is not working. Not even it is getting ON.
Kindly give an solution for this.
Thank you
This question was solved.
View Solution.

The 601 error is a problem with the main battery which I suspect is just old. Have you tried removing the battery and starting the laptop with just the power adapter?

HP internal Error 601

Hello,
I have started receiving Error 601 every time I am going to logo on to my ProBook 4520s, in the last 72 hours. What is it, what does it affect, and how do I correct this issue. Someone suggested I check to see if my battery was one of the ones recalled.
Waiting for your response,
casavarela

Hi,
How to change it and what batterys there can match: http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c02439213-2.pdf
page 55. about battery.
But to be 100% sure you can check your battery inside of your computer and see the HP spare part number.
battery on Ebay: http://www.ebay.com/bhp/hp-probook-4520s-battery
Else you can go to HP Partsurfer and search on your Product number
Hope it helps you.
Best regards
Zincas
I work on behalf of HP

Batter Error 601

Similar Messages

Maybe you are looking for