BB 9300 curve needs twice a day to charge

Hi,
My BB needs twice a day to be charged. the problem started when i came to my country (cyprus) from england for holidays. i dont have the blackberry service on for my cyprus sim. do i have to change the battery? or to restore the phone?
Thanks
Andreas

goto your desk top manager, on the top left menu device --> device options --> un tick the synchronize section .... my computer date and time with my device ... you should solve the issue ......
cheng lam from singapore

Similar Messages

  • E2500 - Needs to be Power Cycled Once or Twice a Day.

    Brand new E2500, needs to be power-cycled once or twice a day. Already reinstalled Cisco Connect and updated the Firmware.
    Having some problems with my brand new router and customer service is being of VERY LITTLE help! What should I do?

    Let me know the concern that you have, is with the wired connection or with the wireless connection?
    You said that you have upgraded the firmware, but after upgrading the firmware you didn’t reset the Router… So reset the Router, power cycle the whole network… Then follow the steps:
    If you want to configure the router with the help of the CD so for that you need to uninstall the existing Cisco Connect Software from the computer if there...
    Reset the Router and power cycle the network...Make the following connectivity – Connect the Modem with the Router’s Internet port and then connect the Computer with any one of the Ethernet port of the Router [Numbered 1, 2, 3 and 4]... Then install the Cisco Connect Software... It will help you in configuring the Router...
    Otherwise you can configure it manually as well…For Let me know the name of the ISP [Internet Service Provider] – means the connection is a DSL connection or cable connection…
    So if you have a DSL connection you can refer to this link:
    http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=4020&userrole=Linksy...
    So if you have a Cable Internet Connection you can refer to this link:
    http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&vw=1&articleid=3686
    As far as the wireless is concern:
    # Open up the browser and on the address bar type “IP address of the Default Gateway” that will open up the Router setup page…
    # Then Click on wireless Tab create the Wireless Network Name SSID and select the channel to 6, 9, and 11… Click Save Settings...
    # Then Click on Wireless Security sub tab and select the security mode and provide the password as per the requirement… Click Save Settings...
    After doing the settings try to connect the preferred network on the wireless devices and check the connectivity….

  • Since updating to iso7 my battery is needing to be charged at least twice a day.ive always looked after my battery and only ever charge when less than 20% so why is this happening? Thankyou

    Since updating to iso7 my battery is needing to be charged at least twice a day.ive always looked after my battery and only ever charge when less than 20% so why is this happening? Thankyou

    It will take longer to charge the 5G's battery than either the 3G or 4G's battery.
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source like a computer's USB port
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Have creative cloud installed and Creative Suite 6 need both installed on this machine anytime I open acrobat it prompts for the serial number at least twice a day

    When I open Acrobat it prompts to enter serial number was twice a week now is twice a day. Do not know how to get this to go away. Worked with Creative Cloud support they said it was a CS6 issue but CS6 does not have support. That I can find

    Hi Michael ,
    With CS6 we used to ship Acrobat 10 and with Creative Cloud it's Acrobat 11.
    Have you installed both on the system?
    Which version of Acrobat and OS are you using?
    Regards
    Sukrit Dhingra

  • Update SharePoint list programatically twice a day with SQL 2008 r2

    How complicate is to sustain the update  SharePoint list programatically twice a day by using SQL job?
    the data need  to be update twice a day and it is going o be use to feed a share point form...where the user(S) will be choosing by lookup in infopath form.
    BTW..I do not have control of the SharePoint farm, I have MS SQL 2008 R2 and SharePoint version is 2010. 
    Or Also I am considering to use  MS access 2010 and SharePoint version is 2010.
    CRISTINA&amp MICROSOFT Forum

    >DRAFT IDEA<
    Is this will corrupt SharePoint if I try this?
    The two data list that I want to update twice a day come from other database sources
    One is from Human Resources roster list. (The result of the query) –amount of records >> 600
    UNREAL
    example
    Unique ID
    domain name
    Region
    Badge
    Full Name
    email address
    Manager
    Director
    EUROPE
    EMEA
    123456
    Bear, Charles
    [email protected]
    Hanc, Juilan
    Cano, Oscar
    AMERICAS
    ABU
    223456
    Ros, Adrian
    [email protected]
    Knight, Dexter
    Brown, Dexter
    ASIA-PACIFIC
    APJ
    323456
    Chen, Andy
    [email protected]
    Ducann, Scott
    Ginger, Jeff
    (JOIN) From the roster list connect with the User Information List "user
    credential"(/_vti_bin/UserProfileService.asmx) to allow me Create dependent drop-down by using these articles:
    https://claytoncobb.wordpress.com/2009/06/21/userprofileservice-extended/
    http://sharepoint911.com/blogs/laura/Lists/Posts/Post.aspx?ID=172
    http://blogs.msdn.com/b/infopath/archive/2004/03/24/95529.aspx
    http://www.dotnetcurry.com/showarticle.aspx?ID=794
    http://www.codeproject.com/Articles/155829/SQL-Server-Integration-Services-SSIS-Part-Basics
    The second one comes from Account list. (The result of the query) –amount of records >> 22,000
    FAKE
    example
    Unique ID
    email_address
    account_id
    account_lk_id
    account_name
    subdivision_region_name
    subdivision
    support_model
    [email protected]
    22650
    22649
    NANA Web Skills
    AP
    Martial Law
    PunkingSPlus
    [email protected]
    16624
    16624
    ELECTRIC FOOD
    AMER
    Short Circuit Blue
    PunkingSPlus
    [email protected]
    12538
    12538
    100 Got drunk
    EMEA
    100 Got drunk
    PunkingSPlus
    [email protected]
    22206
    22205
    911 Hospital Ghost
    AP
     Hospital AP
    PunkingSPlus
    [email protected]
    6886
    6886
    Administration for UFO LAND
    AP
    Xiamen
    PunkingSPlus
    [email protected]
    22242
    22241
    ACT  Recording
    EMEA
    ACT  Recording  Orange
    PunkingSPlus
    (JOIN) In this list I will need to do the same connect with the User Information List "user
    credential"(/_vti_bin/UserProfileService.asmx)
    To narrow these lists to what they are only responsible to work..
    These two tables are going to be part of InfoPath form ...
    with these draft idea , Do I need to be considering to be using what you suggest ? >>>"PowerShell
    availabe in SQL and the CSOM to interact with SharePoint "
    Could be possible that you can also provide an article?? relate to ....
    "Firstly you must not update SharePoint content databases directly from SQL. Doing so may
    corrupt your farm and will render it unsupported by Microsoft."
    Thanks in advance
    CRISTINA 

  • Scheduling PC twice a day

    hi,
    i need to schedule my PC to run twice a day:
    once in the morning and the second time at noon, how can i perform it ?
    thanks a lot
    Nir Kaminsky

    Nir,
    If you want to schedule periodically means daily, weekly or every 12 hours(hourly) you can do this from Process Chain start variant settings as already explained.
    But if you want to execute 06:00 and 12:00 then you can do using those settings.
    Its better to start process chain through an Event. create an abap program to raise an event.
    Check: [how to ... start process chain through an event|http://sapbwneelam.blogspot.com/2007/09/how-to-start-process-chain-through.html]
    Hope it Helps
    Srini
    [Dont forget to close the call by assigning points.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

  • Start JDBC Receiver channel twice per day

    Hello,
    I need to get some piece of data from Oracle database twice per day. For example at 12:00am and 12:00pm. Standard JDBC Receiver channel has no needed settings. It has only "poll interval" without exact time.
    I can set up "poll interval" to 12 hours, but this can't guarantee that JDBC receiver channel will works only twice per day. For example after XI system restart JDBC adapter loses time counter. It means that JDBC adapter can starts more than 2 times per day.
    I have only one idea at this moment.
    I can create ABAP program which can be planned as ABAP job at needed time and with needed period.
    This program should send some dummy message to Integration Engine. Integration Engine should start some Integration Process which can read data from Oracle database via JDBC channel.
    What else opportunities are?
    Thanks.
    Best regards,
    Eugeny

    Message deleted
    Message was edited by: Shabarish Vijayakumar

  • Faulty Macbook Pro, crashing twice per day!

    Hi guys!
    im having hard time here with my pro,
    at least twice per day it crashes, 90% of the time it just stop, the sound goes on loop, and the only way to recover it is to keep the start button until it turns off. 10% of the times the screen goes black and appears the error message that suggest to restart the system.
    once i went trought the errors of the kernel panic but i wasnt able to find what it was,
    any suggestion??
    zed

    I am also guessing you are using the 9600M GT graphics card? Try switching over to the 9400M if you don't need the additional power. It reduces temps dramatically and I have yet to experience a thermal shutdown with the 9400M enabled. Take the macbook pro into an apple store or CERTIFIED Apple Registered Technician and have the heatsink reseated onto the CPU. This should allow for better heat transfer from the CPU to the heatsink, and overall reducing your overheating problem.

  • Z10 drops BB network twice per day

    I'm on Rogers, but don't know if it's a carrier thing or not. My BB Z10 icon is dropping at least twice a day, and my phone gets really warm when it happens. Then it shuts off. I need to do a battery pull to get it alive again.
    Any thoughts? Anyone else experiencing this issue?

    Hi jameskennedy,
    Did you use your  SIM card in a previous BlackBerry smartphone? If so, did you ever experience similar issues?
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • 9300 curve memory

    I had an offer I couldn't refuse from virgin for a 9300 curve. It was my intention to use it mainly for calls and texts. However I now want to use it for web browsing as well. I am finding that on some sites the memory is not large enough to open the files. I know I could get another version with a larger memory, but is there any way I can upgrade/increase the memory on my current phone? I would appreciate any replies in non technical language as I am not experienced in mobile phone technology
    Thanks, hope to hear from someone soon
    wanderingalbatross

    If you want to delete apps, scroll to in on the menu and hit the BB menu button (you know, the one that looks like the Blackberry logo). Delete should be in there. You might need to reboot your phone after deleting some apps though, it'll warn you if you do.
    That usually works if you select other stuff - like photos - that you want to delete too.

  • Post Moved homehub 2 crashes twice a day

    POst Moved to The Infinity board http://community.bt.com/t5/BT-Infinity/homehub-2-crashes-twice-a-day/td-p/538270
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    welcome to the BT community forum where customers help customers and only BT employees are the forum mods
    in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) bt speedtester and post the results .
    are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Homehub 2 crashes twice a day

    My homehub crashes at least twice a day. I have had my HH2 replaced twice but without any difference. I would paste ADSL stats but my HH does not saeem to report them.
    Any help would be greatly appreciated as it is very annoying now.

    welcome to the BT community forum where customers help customers and only BT employees are the forum mods
    in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) bt speedtester and post the results .
    are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • My battery drains VERY quickly, I'm having to plug in twice a day!

    Hi
    Its becoming incresingly annoying that I'm having to charge my iPhone twice a day. Its always 100% at the start of the day and come around tea time its down to around 30%. I do use it for whatsapp but thats about it during the day and after having an iPhone 3 & 4 I've never experienced such issues. I was told the battery life was improved with the iPhone 5?
    My main point is that its not always been like this and with having over a year left on my contract I need to nip this in the bud before it gets any worse.
    Things I have tried so far (To no avail)
    Closing all apps that are open.
    Lowered my screen brightness (I can only just see it)
    Any suggestions as neither of the above two have worked.
    Cheers
    Gareth

    Gphoenix1 wrote:
    Its becoming incresingly annoying that I'm having to charge my iPhone twice a day.
    That is what happens when a battery powered device is used often.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    A simple search of the forums would have revealed the same information.

  • Since I updated to iCloud, Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 has no problems. What's wrong?

    Since I updated to iCloud, (which may or may not be related) Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 and my old iMac has no problems. When there is no service a yellow warning triangle appears adjacent to the Inbox and Connection Doctor reports,"Trying to log into this MobileMe IMAP account failed. Verify that username and password are correct."  Since it does fetch Mail from time to time they cannot be wrong.... can they? Should I update to 10.7 and if so what does that entail?

    You have been using MobileMe's email settings, which sometimes continue to work for a time after migration but then get turned off. iCloud's mail server settings are different. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
    Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
    The situation with iCloud and Snow Leopard is described in detail here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html

  • Is there a way to have longer battery life on a 4s iPhone?  Brand new iPhone 4s out of the box I have to charge twice a day.

    Is there a way to have longer battery life on a 4s iPhone?  Brand new iPhone 4s out of the box I have to charge twice a day.

    Absolutely.  Search this forum or look in the "More Like This" box to your right.

Maybe you are looking for