BBM Group does not see my messages
I can see everything the group does but noone sees me. They were able to see my messages before I did a software upgrade to version 4.7.1.61. I've done a couple of battery pulls and they are not working. Any ideas? Thanks
Hi there and sorry no one got back to you sooner... have you managed to resolve this issue? One way that has worked for others is to leave the group and then have someone reinvite you in.
If you are still checking this periodically, please let us know how it goes.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!
Similar Messages
-
Nokia Suite does not see saved messages
Hi! I transferred a part of the messages in my Nokia 6303 to phone' s folder Saved Messages, and since then the troubles began.
1. I can not move any sms out of the Saved Messages folder, for example, it is not possible to send them back to Inbox folder or any place else.
2. Nokia Suite does not see some of those saved messages- they appear as empty boxes there, despite I can read them on my phone.
Can I restore all messages downloaded to Nokia Suite, making them readable?
How can I move the sms from Saved Messages folder on my phone?
Can I tranfer sms from Saved Messages folder of my Nokia 6303 to another phone (even not Nokia)?Hi Nicksimper,
Welcome to the Nokia Discussion boards!
First could you do a soft reset on your phone by entering *#7780# into your phone’s keypad. The default password when prompted is 12345. This reset will NOT erase any data, but revert settings back to original. Also, ensure you have the latest firmware by visiting this page and the latest version of PC Suite by following this link here.
The following link provides extensive information for managing your messages on Nokia devices using Nokia PC suite.
In order for you to move messages out of the “Saved messages” folder, you will have to create a new folder in the same directory, but you will not able to move messages back into your inbox. To move your saved messages to another non-Nokia device, you can forward the messages via SMS.
Hope this helps and let us know how it works out.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users! -
Can i send group texts and have them be sent as indivuale texts so everybody does not see responses
How to send group texts and have them sent as individual texts so everybody does not see responses?
deref, Group messaging is a great way to keep everyone in touch. I use them quite frequently. When you send a group message the replies will be sent to everyone. You can send them individually so people cannot see the replies. RobinD_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
-
Hello!
Staff of E4 Group JSC use Apple devices for call, reading email and calendars. When the user open event in calendar of iPhone or iPad, he does not see attachments (picture №1, picture №2). But it is possible on Blackberry (picture №3). How user of Apple can see these attachments? Recommend please any apps for it.Hello!
Staff of E4 Group JSC use Apple devices for call, reading email and calendars. When the user open event in calendar of iPhone or iPad, he does not see attachments (picture №1, picture №2). But it is possible on Blackberry (picture №3). How user of Apple can see these attachments? Recommend please any apps for it. -
Hello i needed to install an extension for dreamweaver and for some reason extension manager does not see all my adobe programs. How can i fix that without reinstalling the programs?
Here are my Bridgetalk Diagnostics if it helps:
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 69ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[12:58:04]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 12:58:05
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[12:58:04]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 13:08:04
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 7
Connector = PCD
Installed: 0
Running: 0
fireworks-12.0:
Group = cs
Path = /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app
Display Name = Adobe Fireworks CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.Fireworks
Status = (not running)
ExeName = Adobe Fireworks CS6.app
aftereffects-11.0:
Group = cs
Path = /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app
Display Name = Adobe After Effects CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.AfterEffects
Status = (not running)
ExeName = Adobe After Effects CS6.app
audition-5.0:
Group = cs
Path = /Applications/Adobe Audition CS6/Adobe Audition CS6.app
Display Name = Adobe Audition CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.Audition.5.0
Status = (not running)
ExeName = Adobe Audition CS6.app
bridge-5.064:
Group = cs
Path = /Applications/Adobe Bridge CS6/Adobe Bridge CS6.app
Display Name = Bridge CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.bridge5
Status = (not running)
ExeName = Adobe Bridge CS6.app
estoolkit-3.8: PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Display Name = ExtendScript Toolkit CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
Status = PUMPING
Info:
Group = cs
Version = 2.0
Build = ES 4.2.12
Next serial number = 47
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 270ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
ExeName = ExtendScript Toolkit.app
exman-6.0:
Group = cs
Path = /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.app
switchboard-2.0:
Group = cs
Path = /Library/Application Support/Adobe/SwitchBoard/SwitchBoard.app
Display Name = SwitchBoard 2.0
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
Status = (not running)
ExeName = SwitchBoard.app
Installed: 6
Running: 1
Groups: 119
cs3:
acrobat-8.0
aftereffects-8.0
soundbooth-1.0
bridge-2.0
contribute-4.5
devicecentral-1.0
dreamweaver-9.0
encore-3.0
estoolkit-2.0
fireworks-9.0
flash-9.0
illustrator-13.0
indesign-5.0
indesignserver-5.0
incopy-5.0
photoshop-10.0
premiere-3.0
stockphotos-1.5
audition-3.0
cs4:
acrobat-9.0
aftereffects-9.0
soundbooth-2.0
bridge-3.0
contribute-5.0
devicecentral-2.0
dreamweaver-10.0
encore-4.0
estoolkit-3.0
fireworks-10.0
flash-10.0
illustrator-14.0
indesign-6.0
indesignserver-6.0
incopy-6.0
photoshop-11.*
premierepro-4.0
audition-4.0
ame-1.0
exman-2.0
cs5:
acrobat-9.0
aftereffects-10.0
soundbooth-3.0
bridge-4.0
contribute-6.0
devicecentral-3.0
dreamweaver-11.0
encore-5.0
estoolkit-3.5
fireworks-11.0
flash-11.0
illustrator-15.0
indesign-7.0
indesignserver-7.0
incopy-7.0
photoshop-12.*
premierepro-5.0
audition-5.0
ame-2.0
exman-3.0
flashbuilder-4.0
flashcatalyst-1.0
ts1:
captivate3-en_us
captivate3-fr_fr
captivate3-it_it
captivate3-ja_jp
captivate3-es_es
captivate3-de_de
ts2:
captivate-4.0
el2:
captivate-5.0
as1:
acrobat-10.0
ts3:
robohelp-9.0
framemaker-10.0
cs55:
aftereffects-10.5
audition-4.0
bridge-4.1
contribute-6.1
devicecentral-3.5
dreamweaver-11.5
encore-5.1
estoolkit-3.6
fireworks-11.1
flash-11.5
illustrator-15.1
indesign-7.5
indesignserver-7.5
incopy-7.5
photoshop-55.*
premierepro-5.5
ame-2.5
exman-5.5
flashbuilder-4.5
flashcatalyst-1.5
switchboard-2.0
el25:
captivate-5.5
cs60:
aftereffects-11.0
audition-5.0
bridge-5.*
contribute-6.88
devicecentral-4.0
dreamweaver-12.0
encore-6.0
estoolkit-3.8
fireworks-12.0
flash-12.0
illustrator-16.*
indesign-8.0
indesignserver-8.0
incopy-8.0
photoshop-60.*
premierepro-6.0
ame-6.0
exman-6.0
flashbuilder-4.52
switchboard-2.0
prelude-1.0
speedgrade-6.0
el60:
captivate-60.*
ts4:
robohelp-10.0
framemaker-11.0Same issue. Doesn't see Dreamweaver.
-
HRMS APP-PER-52803:Your business group does not match your security profile
I see this as a common problem, please guide me as to what should be done to rectify it.
While opening \Payroll\Description, it gives message as under:
HRMS APP-PER-52803:Your business group does not match your security profile
Regards
NemoHi,
I feel that "HR: Security Profile" option is not set properly, BZ of that screen is errors out.
Please check the following Profile Options
HR: Security Profile -- Enter the sec profile name which is business Group name
HR: Business Group -- Your Business Group Name
Note: If you set the HR: Security Profile optional first, then system will sets the HR: Business Group profile option too automatically.
I hope this will solves your problem.
thanks
Krishna Prasad Rapolu
Oracle HRMS Consultant. -
My computer does not see my printer
Hi: I am having a problem with my HP Photosmart 4500 printer. My computer does not see it. I have a USB connected to it, have uninstalled and installed the software two time, dowloaded the latest update and nothing. Add to that, I can not connect it by WIFI. WIFI on the printer is on but again, it's no where on any of the screens. The only variable I can think of that has changed has been the router I got recently from AT&T. Everything else works with the WIFI but no computer. I'm running 10.7.5. I have read the install instructions and nothing seems to be working. The one thing I do get from the HP install disc is a message reading the printer isn't recognized but there are no updates in support. OK, what am I missing here?
Try these steps to uninstall the current software using the HP scrubber and then reinstall using the current HP driver available through Apple.
To do so, perform the following steps:
1. Go to Applications/Hewlett Packard/ and then click on “HP Uninstaller”
2. Next click “Continue”
3. Highlight the device on the left pane.
4. Press and hold control+alt+command on the keyboard simultaneously while you click on “Uninstall”.
5. After you do this, you will see a pop up that asks you if you want to uninstall all HP software. Please note, that in doing this, it will remove any other HP printers that you also have installed.
6. Click “continue” and wait for the program to finish.
7. After it completes, reboot your computer.
Once the computer is back on, do the following steps:
WARNING: This is will delete all of your printers.
1. Go into “System Preferences” and then select either “Print & Scan” or "Print & Fax".
2. Right click (or control + click) on the rectangle listing your printers and then select “Reset Printing System”.
After you have reset the printing system, let's make sure you have the most recent HP driver package installed.
You can do this two ways. First, check for any available HP Update's by clicking the Apple icon and then Software Update. If there are any updates available, they should show up here. However, if the printer is connected by USB, it will not show any available updates. The other option is downloading the drivers from Apple's website.
You can download it here: http://support.apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg
Once you have downloaded the driver package and completed the installation, you will want to plug your printer back in (if you were using a USB connection). After the printer is plugged back in, go into your print settings under System Preferences > Print & Scan. To add the printer, click the plus sign. You should see your printer listed here. If not, click "Add Printer or Scanner." Click the name of your printer and then click "Use:” box. Make sure that says the name of your printer and not AirPrint. If you are using the printer wirelessly, make sure that the printer "Kind:" is set to Bonjour or Bonjour Multifunction. Click "Add" down in the bottom right hand corner.
This will add your printer back using the most recent HP print driver available through Apple. Let me know if this helps resolve your issue or not. If it doesn't, let me know I will see what else I can do.
Best of luck,
Kyle -
I updated to iTunes 10.7 and now iTunes does not see my iPod touch. After the update I got a message that the Apple Mobile Device USB Driver could not be installed. I have uninstalled and reinstalled iTunes 3 times, but still cannot fix the problem. I have followed the suggested fixes in Apple Support. Any suggestions? Thanks!
Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
ITunes 11 does not see my iPhone
I installed iTunes 11 with software-update and got an error-message (see screenshot, german), nevertheless it was updated.
It works fine, but it does not see either my iPhone or my iPad in the list on the left side. There are no devices ...
Thanks for help ...And suddenly, after 2 restarts, it´s there.
Problem solved. No idea why it works now. -
Windows Vista does not see my Ipad but it always did prior to this attempt
Windows Vista does not see my Ipad, this is a new problem and I have not made any major changes to either my computer or to my Ipad. I am running Vista 64 as an operating system. I get the message that windows has an unrecognized USB device. I checked to see if the Apple Mobility software is running and it was, I reset it, turned off the computer, soft reset the Ipad but still no luck.
Hi,
Can you try a different USB port?
Check out this link just in case.
http://support.apple.com/kb/HT4049
Carolyn :-) -
I just connected my iPad (4.3.2) to my mac (10.5). It launched the synch process for photos and videos and everything went fine. I then clicked on one of the newly imported photos in iPhoto and it choked and ultimately closed the app and gave me message along the lines of "iPhoto quit Unexpectedly." I rebooted the machine and when it came up went to look in iPhoto and saw that the new photos/video were not there. They are still on the iPad (Fortunately!) However when I reconnect the iPad to the Mac it does not see any content to import. In essence it seems to think it did the import and is not aware that it lost the content.
There's a couple possible solutions I'm interested in. One, are the photos/video somewhere on the Mac and just need to be dug up? I nosed around a bit but found nothing. Then other solution would be is there some way to force iPhoto to reimport what's on the iPad, ignoring that it feels it's already done this?
Thanks,
WilWhere did these photos come from to begin with? Did you import them from the iPad into iPhoto on your Mac? Is that what you are saying here?
-
I bought a used i pod 4 for my daughter and it does not have the message icon on it ( not even in settings) how can I get the message icon on it so it can receive and send messages
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
User or group does not exists.
Hi,
I am running an unattented installation of SQL on a server. I run it with the following configuration:
;SQLSERVER2008 Configuration File
[SQLSERVER2008]
;************************* CORE ARGUMENTS *************************
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance.
INSTANCEID="MSSQLSERVER"
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books
online, Business Intelligence Development Studio, and other shared components.
FEATURES=SQLENGINE,REPLICATION,FULLTEXT,AS,RS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK
; Setup will not display any user interface. ***
QUIET="True"
; Needed argument for silent installation
IACCEPTSQLSERVERLICENSETERMS="True"
;*************************** OPTIONAL *****************************
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console. ***
INDICATEPROGRESS="True"
; Setup will display progress only without any user interaction.
QUIETSIMPLE="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; Use this parameter to install the English version of SQL Server on a localized operating system when the installation media includes language packs for both English and the language corresponding to the operating system.
ENU="True"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature.
SQMREPORTING="False"
; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting
Services (RS).
INSTANCENAME="MSSQLSERVER"
; Agent account name
AGTSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Auto-start service after installation. ***
AGTSVCSTARTUPTYPE="Automatic"
; Startup type for Integration Services.
ISSVCSTARTUPTYPE="Automatic"
; Account for Integration Services: Domain\User or system account.
ISSVCACCOUNT="NT AUTHORITY\NetworkService"
; The name of the account that the Analysis Services service runs under.
ASSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Controls the service startup type setting after the service has been created.
ASSVCSTARTUPTYPE="Automatic"
; The collation to be used by Analysis Services.
ASCOLLATION="Latin1_General_CI_AS"
; The location for the Analysis Services data files.
ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data"
; The location for the Analysis Services log files.
ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log"
; The location for the Analysis Services backup files.
ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup"
; The location for the Analysis Services temporary files.
ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp"
; The location for the Analysis Services configuration files.
ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config"
; Specifies whether or not the MSOLAP provider is allowed to run in process.
ASPROVIDERMSOLAP="1"
; Specifies the list of administrator accounts that need to be provisioned.
ASSYSADMINACCOUNTS=”CRB\dsstest”
; Startup type for the SQL Server service.
SQLSVCSTARTUPTYPE="Automatic"
; Specifies a Windows collation or an SQL collation to use for the Database Engine.
SQLCOLLATION="SQL_Latin1_General_CP1_CI_AS"
; Account for SQL Server service: Domain\User or system account.
SQLSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS=”CRB\dsstest”
; Level to enable FILESTREAM feature at (0, 1, 2 or 3).
FILESTREAMLEVEL="0"
; Set to "1" to enable RANU for SQL Server Express.
ENABLERANU="False"
; Specify 0 to disable or 1 to enable the TCP/IP protocol.
TCPENABLED="1"
; Specify 0 to disable or 1 to enable the Named Pipes protocol.
NPENABLED="0"
; Startup type for Browser Service.
BROWSERSVCSTARTUPTYPE="Automatic"
; Specifies which account the report server NT service should execute under. When omitted or when the value is empty string, the default built-in account for the current operating system.
; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
; The domain part of RSSVCACCOUNT is a maximum of 254 characters long.
RSSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Specifies how the startup mode of the report server NT service. When
; Manual - Service startup is manual mode (default).
; Automatic - Service startup is automatic mode.
; Disabled - Service is disabled
RSSVCSTARTUPTYPE="Automatic"
; Specifies which mode report server is installed in.
; Default value: “FilesOnly”
RSINSTALLMODE="DefaultNativeMode"
; Full-Text filter launcher service account
FTSVCACCOUNT="NT AUTHORITY\LOCAL SERVICE"
I run the installation with the user crb\dsstest, but i get the following error:
2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2011-12-28 12:59:02 Slp: Inner exceptions are being indented
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp: Data:
2011-12-28 12:59:02 Slp: SQL.Setup.FailureCategory = InputSettingValidationFailure
2011-12-28 12:59:02 Slp: DisableWatson = true
2011-12-28 12:59:02 Slp: Stack:
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:59:02 Slp: Inner exception type: System.ApplicationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Error result: -2068578304
2011-12-28 12:59:02 Slp: Result facility code: 1204
2011-12-28 12:59:02 Slp: Result error code: 0
Can anyone help me?Hi,
I have tried to chech if it exists. If I add the user dsstest during the normal installation it is found. I am also logged in as the user dsstest. Then everything should be okay rigth, or is there anything else i can check?
The following are the error details:
2011-12-28 12:58:47 AS: Action: (Validation) Validating SysAdmin Accounts
2011-12-28 12:58:47 AS: Action: Validation User Account (”CRB\dsstest”)
2011-12-28 12:58:47 AS: Action: Validating Account
2011-12-28 12:58:47 AS: Data: Account=”CRB\dsstest”
2011-12-28 12:58:47 AS: Data: Account After Mapping = ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: Attempting to get account sid for user account ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: Attempting to get sid for user account ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: GetSidForAccount normalized accountName ”CRB\dsstest” parameter to ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: Failed when querying buffer size
2011-12-28 12:58:47 AS: Warning: Failed to retrieved Account SID. Reason: No mapping between account names and security IDs was done.
2011-12-28 12:58:47 AS: Result: Error
2011-12-28 12:58:47 AS: Result: Invalid
2011-12-28 12:58:47 AS: Result: (Validation) Complete
2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation for Analysis Service
2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Entry
2011-12-28 12:58:47 AS: Data: Latin1_General_CI_AS
2011-12-28 12:58:47 AS: Action: (Utility) Validate Collation Entry
2011-12-28 12:58:47 AS: Data: Latin1_General_CI_AS
2011-12-28 12:58:47 AS: Result: (Utility) Valid
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Match
2011-12-28 12:58:47 AS: Data: ASCollation=Latin1_General_CI_AS,SQLCollation=
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: Action: Detect Whether it is Valid Collation
2011-12-28 12:58:47 AS: Data: Collation = Latin1_General_CI_AS
2011-12-28 12:58:47 AS: Action: (Utility) Retrieving embedded content
2011-12-28 12:58:47 AS: Data: Resource Name =Microsoft.SqlServer.Configuration.ASExtension.LCIDs.xml
2011-12-28 12:58:47 AS: Result: (Utility) Success
2011-12-28 12:58:47 AS: Data: Locale ID=0x0409
2011-12-28 12:58:47 AS: Result: Valid
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: Action: Validating Start Mode
2011-12-28 12:58:47 AS: Result: Success
2011-12-28 12:58:47 AS: Action: Validating Allow in Process
2011-12-28 12:58:47 AS: Data: AllowInProcess=1
2011-12-28 12:58:47 AS: Result: Success
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: ----------------------------------------------
2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\aml021” - User or group does not exists.
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2011-12-28 12:59:02 Slp: Inner exceptions are being indented
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp: Data:
2011-12-28 12:59:02 Slp: SQL.Setup.FailureCategory = InputSettingValidationFailure
2011-12-28 12:59:02 Slp: DisableWatson = true
2011-12-28 12:59:02 Slp: Stack:
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:59:02 Slp: Inner exception type: System.ApplicationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Error result: -2068578304
2011-12-28 12:59:02 Slp: Result facility code: 1204
2011-12-28 12:59:02 Slp: Result error code: 0
Do you need more information then above? The above chech do not fail for the network service:
2011-12-28 12:58:46 ACE: Formatting user name 'NT AUTHORITY\NETWORK SERVICE'
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: Formatted user name is 'NT AUTHORITY\NETWORK SERVICE'
2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword started with userName = 'NT AUTHORITY\NETWORK SERVICE', userNameRequired = 'True', mustBeDomainAcct = 'False'
2011-12-28 12:58:46 ACE: Validating username 'NT AUTHORITY\NETWORK SERVICE' and password '<empty>'
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: Getting sid for service account 'NT AUTHORITY\NETWORK SERVICE'
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: SID for user account is 'S-1-5-20'
2011-12-28 12:58:46 ACE: Validating service account is not LocalService
2011-12-28 12:58:46 ACE: Validating service account is a user account
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 ACE: Validating service account can be used if current machine is domain controller
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: Checking if service account must be a domain account
2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword completed
2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/SSIS/Public was found in the datastore.
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/AS/Public was found in the datastore.
2011-12-28 12:58:46 AS: ----------------------------------------------
2011-12-28 12:58:46 AS: Action: Logging Input Values and it's Sources
2011-12-28 12:58:46 AS: Data: Parameter=ASSVCACCOUNT,Source=ConfigFile,Value=NT AUTHORITY\NETWORK SERVICE
Do you have any idea what is worong? -
IPhone 4 does not see my home WiFi network anymore.
All of a sudden, a few days ago, my wife's iPhone 4 (initially with iOS 6.0.1, now with iOS 6.1) does not see anymore my home WiFi network (created by a Time Capsule), to which it connected automatically.
This has worked flawlessly for years but now the home network (nothing has been changed to its configuration) does not appear in the list of networks seen by the iPhone 4 (mine, iPhone 5 - iOS 6.1 - has no problem at all) and when trying a manual connection I get an error message saying that the network was not found. When I tested, I was a feet away from the Time Capsule.
I have turned the iPhone off and on again twice, to no avail. Just to try something, I created a new WiFi network from my iMac and it was immediately seen by the iPhone 4.
I don't see what could explain these symptoms and what would be the cure.
Help welcome
Thanks
JackyNo luck. It changed nothing to iPhone behaviour.
Thanks anyway.
Jacky -
Equium A60 does not see a recording drive
Sadly more help is needed with my Equium A60 following on from the earlier fault of the missing CD\DVD drive. Thanks for the help earlier, I did get my cd drive back in 'My Computer' and it does read cds..
Today I tried to put some mp3s on a known working CDRW and my DVD writer is not seen. I get a error message saying you don't have a cd writer.. I have CD Creator 6 which I have been using ok before, that too does not see a recording drive on my laptop.
I can no longer format a blank cdr or drag and drop on a cdrw formatted previously.
Any ideas anyone.?? Thanx.!!Hi,
in 'My Computer' right-click on the DVD drive and select properties. Check if on the record tab CD-recording is activated.
Bye
Maybe you are looking for
-
How can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port
I have ask this question in the local shop but they could not answer me - how can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port
-
NetFx3 error while installing SQL Server 2012 on windows 8 Pro
I can't install SQL Server 2012 on my windows 8 Pro, every time I try I get this error: Error while trying to enable NetFx3 Can anyone help, please.
-
Adobe Reader 10.1.0 savepath
Hello, We have upgradet from the Version 9 to X. But now I have the problem, that when i save a document for example in d:/documents/school/english and then i close adobe reader. now i open another file, click on file, save as, pdf - he should show m
-
10.7.5, MacBook Pro Why can't I update many things including my Epson printer driver?
-
Hi, For applying patch 8587502:R12.IBY.A on 12.0.6 there is a per-req 7533081:R12.AR.A which is Obsolete and replacement is 7828946. 7828946 is cpc jul09 and is not in my AD_BUGS table. How to make sure weather i need to apply this or i have cpc appl