Bbm icon does not appear in home screen as I update from BBM 6 to 7
am using Torch 9800. I have been unable to locate the BBM icon since I was try to upgrade BBM 6 to 7. I have checked all the tabs and folders, and it is still nowhere to be found. BBM application is only listed in a BB app world,and update fail all the time I want to upgrade please help
Hello jmawalla,
Welcome to the BlackBerry Support Community.
Thank you for your question regarding your missing BBM icon.
The following article will assist you regarding your missing BBM icon: http://bbry.lv/UzPueo
Let us know if this helps.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!
Similar Messages
-
My ipad keeps restarting over and over again and even it does not appear the home screen
my ipad keeps restarting over and over again and even it does not appear the home screen...............................how can i fix this.................
`Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Cheers, Tom -
IPod touch 4th generation..Facetime.
Well yes your close. I got it from Egypt and i am in Egypt now, but vodafone (one of our carriers ) has implemented the use of facetime to its customers here. I guessed the same in the begninig but even if it didnt, since im not using a simcard is that supposed to matter anyways?
It is no where to be found on my ipod, i searched. Also it is not being restricted or anything.
And anyways im goin to the UK next month and staying for a while, would the icon automatically appear, since it comes pre-installed im guessing i wont be able to install it from a unrestricted country (if this was the case) since it is not installed on my ipod in the first place.
Thank you,
Sorry for the inconvenience, but this could be quiet confusing. -
I had home tuning running fine on my mac. Since introducing apple tv the home sharing house icon is missing and will not allow me to drag and drop from home sharing. I have read other blogs that say if the house icon does not appear then home sharing is not set up correctly. Any suggestions as it seems to be running fine except for letting me move files.
see if anything in this support article helps.
-
I downloaded AirPlayIt yesterday from the app store. It was on my iPad yesterday. Today, however, the app icon does not appear on my home screen. When I go into apps it is there but it doesn't have an "Open" choice. There is only a cloud with an arrow pointing down. When I click on the app it pops up but there is no open button. How can I remove it? Tapping it won't work as it isn't on my home screen.
You'll have to contact the developer about this. Apple doesn't make this app;
-
I have downloaded google app on my iPad but the icon does not appear on the home screen.How do I remedy this problem?
Swipe your Home Screen to the right and search for Google.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/68acc81c1fdfda43ca2 2a5a44ab66410.jpg -
Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is downloading at the app store and when complete, I can not open it or reinstall it. Has happened on the last 4 free apps. Help Please
Reset your iPad. Press and hold both the power and home buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till you iPad starts on it's own. Now try and download an app.
-
I have MAC OS X 10.6.8 (up-to-date). How can I get screen mirroring to my Apple TV to work? The icon does not appear at top status bar..
Welcome to the Apple Support Communities
See > http://support.apple.com/kb/HT5404 AirPlay Mirroring is compatible with Mid 2011 and newer MacBooks Air, and OS X Mountain Lion.
As you have Mac OS X Snow Leopard, you haven't got a compatible MacBook Air, so you can't use AirPlay Mirroring. However, you can use a third-party app as AirParrot to mirror the MacBook onto your Apple TV > http://www.airparrot.com -
I just want to remove firefox but cannot do so as the icon does not appear in control panel
It should be listed as "Mozilla Firefox"
*See --> https://support.mozilla.com/en-US/kb/uninstalling%20Firefox
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
I own toshiba laptops. Both computers have the latest itunes software. However the 'show menu' does not appear on the screen?
Thanks for the response diesel. I dont think I clarified my question very well. I'm trying to do home sharing between mine and my wifes computers. The intructions say:
Log in as the same user on each computer.
Ensure both are current version.
Choose the correct list in sharing ie Music
Then in the 'show menu' at the bottom of the screen, choose items not in my library.
I do not have the show menu to select any songs.
Any help appreciated.
Cheers -
After installing an App, the icon does not appear on the desktop?
After installing an App, the icon does not appear on the desktop? Where would I find it?
Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ? -
Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB" (usb device tree)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x18
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x19
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f -
Progress indicator icon does not appear in Sap Portal
Hi experts.
Currently, i Have developed a WD ABAP which contains a progress indicator icon. When I execute this WD from backend (R/3 via SE80) the Icon progress appears while the WD is recovering data, building structure, etc...
The problem appears when I access to the scenary from SAP Portal, because from SAP Portal does not appear the Progress Icon. Someone can tell me why the icon is not appearing, and how Can i solve it???
Thank in advance.
Best regardsHi Thomas.
First of all, thanks for your answer.
My problem is that I can obtain a progress indicator icon (a circle moving) when I am inside of my Ivew, but I need to show this icon also in the first step, during the initialization. The initialization of my scenary is a hard process which spent a lot of time, and I wonder if is possible show a Process indicator Icon while all data are being recovery. This icon is showed when I run my webdynpro in the Backend, but this icon does not appears qhen the new Internet Explorer Windows is opened.
Do you know how to show it???
Thanks again. -
I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confused.
To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
About AirPlay Mirroring in OS X -
App icon does not appear for Keynote
Tried to download "Keynote App". Icon does not appear. Under the "App Store App" under "Purchased Tab" the app appears in the "Not on this Ipad" (I don't have another ipad) section with a cloud with a downward facing arrow. when I click on that it says " You've already purchased this, so it will be downloaded at no attional charge". When I click "OK" nothing changes.
I have also checked "General"/Usage" under settings and the App does not appear there.
I have an Ipad Air
Any ideas
Thanksreset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
now redownload app from purchase history
Peace, Clyde
Maybe you are looking for
-
Analog inputs no longer working on Audigy 2 ZS Platinum Pro's external dr
I have an Audigy 2 ZS Platinum Pro. After two years of use without problems, the analog inputs on the external dri've have stopped working. I get no signal from them, not even noise. All 3 inputs are silent, Line in / Mic and Line 2 in the front, and
-
Why are Adobe CC programs killing my Win7 Taskbar?
I'm running Windows 7 Pro 64bit, which runs just fine, until I run an Adobe CC App, specifically Premier Pro CC. Then, on the next rebot, my task bar loads incorrectly. It appears to operate, but not fully and it does not display properly at all. It
-
Flash crashes every time I open an fla file
I installed a trial version of Flash CS3. I had a Flash 8 Professional already installed. Every time I tried to open a fla it crashed, so I uninstalled both versions and reinstalled. I still have the same problem. I can't open existing fla files or c
-
Oracle Text and Real Application Clusters
Hello, i know, its a simple question but i found no one, who can answer. We want to use Oracle Text in combination with a 2-Node-ORAC-System. Is this possibe. And if it is, do I have to do a special configuration job. Are there any differences betwen
-
[Solved] Mouse Sensitivity options missing in GNOME 3.8
I have a fresh install with GNOME 3.8 and the mouse sensitivity options are missing, although according to the documentation they should exist. There are no optional packages for gnome-control-center that would enable such a thing, and I have xinput