BBPGETVD throwing an error -Backend system with release 701 are not support

Experts,
After changing the Backend connection from  R3 4.6c to ECC6 sysem in our BBPCRM4.0,
the transaction "BBPGETVD" is not working, which is throwing an error as
"Backend system with release 701 are not supported".
Already we have applied some of the notes (822883 &862290)
Thanks
Ahamed

Are you able to replicate other data like plants, product categories from the same backend system or are you facing the same error?
Also please check the logical system and see if they are assigned to the client correctly. (in SPRO settings)
Thanks,
Prashanth

Similar Messages

  • "Backend systems with Release 701 are not supported " - ECC 6.0  to SRM 5.0

    Hi ,
    I have 2 doubts .
    1. We are getting Error "Backend systems with Release 701 are not supported "  while replicating vendors from ECC 6.0 backend system to  SRM 5.0 system.
    There are some notes on simillar topic but are not for SRM 5.0 ,suggested on SDN. an anyone please suggest what need to be done  for the same.
    2. Can we  replicate Vendor Master Data with Contact Person  from SRM to ECC system ? if yes, How ?
    Regards
    Narendra

    answer 1:-
    Note 1372175 - BBP_VENDOR_GET_DATA_JOB "Back-End Systems Not Supported"
    On recent upgrade of the ECC back-end system to release '701' the program BBP_VENDOR_GET_DATA_JOB is getting errored out. If you are using SRM 5.0 , SRM_SERVER 550 with ECC backend Release 701 you encounter the above reported problem
    Other terms
    Vendor Replication Job, Release 701, Backend not supported, BBP_VENDOR_GET_DATA_JOB
    Reason and Prerequisites
    The program does not consider the release 701
         remote_release EQ '700' OR remote_release EQ '701'.
    OR
    bbp_vendor_get_data - DEBUG what ois the remote_release 700 or 701?
    Muhtu

  • 'Backend systems with Release 701 are not supported'

    while BBPGETVD transaction is run below error is seen,
    'Backend systems with Release 701 are not supported'
    Please help to resolve it.

    Hi
    What is your backend system ECC version?
    What is the configuaration in Define back end system?
    Note 1313972 - BBPGETVD: Backend system latest release not supported
    br
    muthu

  • Backend System with Release 701 are not supported

    SRM 5.0
    Extended Classic Scenario
    CCM 2.0
    When updating the vendors in SRM system using TC - BBPUPDVD getting the below error message :-
    Backend System with Release 701 are not supported
    Have checked in table - BBP_BACKEND_DEST, the backend entry is properly maintained.
    Can any one advice.
    Regards,
    Jayoti
    Edited by: SAP jayoti on Dec 7, 2010 1:11 PM

    The problem is resolved for vendor relication after applying the below notes 1313972 and 1372175.
    ECC sandbox seems to be in 701 release. When the backend system ECC is in release 701, vendor replication fails with the error message that 'Backend system release 701 not supported'. We need to apply notes 1313972 and 1372175 to fix this issue. I have applied them in Sandbox and the issue is resolved now.

  • BBPGETVD - error:backend systems with release 700 are not supported

    Hi,
    When I am trying to replicate vendor data from EEC to crm 4.0 via BBPGETVD.
    I get the error message"backend systems with release 700 are not supported"
    Is anyone have Idea what is wrong? and how can fix it?
    Thanks,
    Rachel

    Yossi,
    I believe that standard transaction does not work with ECC 6.0.  The standard response would be to upgrade your CRM system to 5.0 so that you can download vendors from ECC 6.0.
    Bascially the vendor replication programs in CRM below 5.0 aren't really that reliable for delta downloads(one error will cause an entire load to fail).  So you probably at best should copy the SAP standards to generate custom load programs as a starting point.
    It is not too difficult and overcomes some of the restrictions that SAP puts in place(i.e. you can only use one number range for vendors downloaded, etc.).  This is definitely one of the weak points of CRM 4.0 that was fixed in CRM 5.0.
    If you have more questions on this let me know.
    Take care,
    Stephen

  • I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server?

    I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server? How do I get rid of this.

    Take a look at this link, https://discussions.apple.com/message/16156214#16156214

  • ERROR:MapLib:973 - Tri-state buffers are not supported in this architecture.

    Hi,
    I face a ERROR:MapLib:973 problem with inout port in a pcore component.
    I need ton instantiate an inout port at the top level to communicate wih my peripherical.
    This inout port is driven by an XPS IP core (pcore).
    The .mpd is  :
    PORT fdata = "", DIR = INOUT , VEC = [31:0], ENABLE=SINGLE, THREE_STATE = TRUE,TRI_I = fdata_I, TRI_O = fdata_O, TRI_T = fdata_T
    PORT fdata_I = "", DIR = I , VEC = [31:0]
    PORT fdata_O = "", DIR = O , VEC = [31:0]
    PORT fdata_T = "", DIR = O
    The .vhd is :
    fdata_o : out std_logic_vector(31 downto 0);
    fdata_i : in std_logic_vector(31 downto 0);
    fdata_t : out std_logic ;
    I got ERROR:MapLib:973 - Tri-state buffers are not supported in this architecture messages for each
    signals of my fdata PORT, while mapping !
    Thanks for you help.

    What device are you targeting, and what version of the software are you using?
    I target a xc7k325t-fbg676-2.
    I use ISE 14.3 form platgen to xst and 14.7 from map to bitgen.
    What does your top level HDL (verilog or VHDL) file look like (where the IO must be instantiated)?
    It is a .vhd in whitch i wrapp my top XPS core, described by .mhs
    The problematic IO port is instantiated into the mb_core.vhd (generated by XPS).
    If i open it, i could see that the tool correctly infer the corresponding IOBUF's :
    component mapping :
    fdata_I => FX3_DQ_I,
    fdata_O => FX3_DQ_O,
    fdata_T => FX3_DQ_T,
    One IOBUF infered:
    iobuf_1 : IOBUF
    port map (
    I => FX3_DQ_O(31),
    IO => FX3_DQ(31),
    O => FX3_DQ_I(31),
    T => FX3_DQ_T
    Top level port :
    FX3_DQ : inout std_logic_vector(31 downto 0);
    THEN FX3_DQ  signal is dirrectly branched in my upper level (top level) vhd file, with the same name.
    What do your constraints file look like (where the pin number and names get declared)?
    The port is only constrained in .ucf, like that:
    NET FX3_DQ[0] LOC = "B24"| IOSTANDARD = LVCMOS33 ;
    NET FX3_DQ[31] LOC = "G26"| IOSTANDARD = LVCMOS33 ;#Bank 14
     

  • Error in Installing Netweaver--domain controllers are not supported

    When i make the pre-requisite check for installing Netweawer 2004s
    I am getting the follwoing error
    <b>installation to domain controllers are not supported</b>
    Pls help me how to resolve this
    Thanks in Advance

    hi balaji,
                  FYI,
                         You cannot create local users and groups on the host that is used as domain controller. Therefore, we do not support running an SAP instance (including the database instance) on the host where the DNS service is installed.
    so try to log with a user, who has administrator rights. and check whtr all the services are up & running. then try to re-install.
    for more on this refer the installation manual.
    hope this will help you.
    with regards,
    Rajesh.
    <i> plz, award with suitable points </i>

  • DAQmx Error: Non-buffered hardware-timed operations are not supported for this d evice and Channel Type.

    Hello,
    I am new to NI and to data acuasition cards in general. I am trying to put an application togather that would play large audio file using NI9263.
    And i am getting the following error.
    DAQmx Error: Non-buffered hardware-timed operations are not supported for this device and Channel Type.
    Status Code: -201025
    Does my hardware support buffering ?
    can i use the EveryNSamplesCallbackAO function ?
    Any sample code, will be helpful at this time. Thanks.

    Hi yma200,
    Are you using a USB 9263?  If so, this might be of help:
    http://digital.ni.com/public.nsf/allkb/EC1968728E660B288625780700570D06?OpenDocument
    If it doesn't help, can you please post the code that you have that is causing your error?
    Regards,
    Bogdan Buricea
    Applications Engineer
    National Instruments

  • Currently using Flash Pro CS5,  getting error when trying to open CS4 file.  Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

    Currently using Flash Pro CS5,  getting error when trying to open CS4 file.  Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.  Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

    Having the same problem in CS6.  I can tell you that converting back to CS4 will NOT solve the problem.  It seems when support for backward compatibility is discontinued, there's just no way to get
    any help at all?  Absolute failure to provide any user support so far...

  • SapEHP Installer - ERROR: Release '701' is not supported by this tool!

    Hi gurus, I am trying to do a EHP4 upgrade using the EHPI. I am using the latest EHPI 710. The moment i enter the KEYword and Download directory it go through and then come up with an error message "701 is not supported by this tool". Please help me solve this issue.

    Hi Ram,
    1) You are using wrong EHPI , you need to use SAP EHPI 700 version . The EHPI 710 to upgrade SAP NW 710 system to EHP1 i.e to 711
               My Company's Application Components" SAP EHP INSTALLER" SAP EHP INSTALLER 7.00
    2)  You need to generate .xml file from SAP Solution Manager by seleting required ECC usagae types. SAP EHPI will ask for .xml file in future steps.
    Regards,
    Preethish

  • URLs with type nwnode are not supported

    I recently purchased a new macbook air it came with mac os x 10.8.3, let me first advise i am a first-time mac user but am an IT professional with about 15 years of experience so i have made an attempt to research and resolve this issue prior to posting. My goal was to find an application other than itunes i could use to add music to my iphone as i use several computers throughout the day using itunes would not be an option. My problem is all of the apps which i've found, freesync being the last and what i was told best to use are generating the below error. After acknowledging the alert freesync still does not recognize my iphone (4s btw IOS 6.1.2) once connected, itunes does however. From what i've read the OS installed on the laptop is compatible so my next guess is the IOS isn't supported? I found a few posts online regarding the error and the fix identified references a folder titled "URLMount (From old Mac)" which i don't have obviously as this wasn't an upgrade but rather a fresh install. Any help would be greatly appreciated, i'm loving my first apple laptop just ***** i can't put music on my phone using it.

    This issue is caused by one of the third-party applications you installed. I have no way of knowing which one, but some that have been reported to cause it include DropBox, Path Finder, CloudMe, and perhaps others.

  • I have a Network notification pop-up every ten minutes they says "There was a problem conecting to server. URLS with type "file;" are not supported". How do I get this to go away?

    Ever since I updated my software to Mountain Lion, I've been getting the attached pop-up every 10 Minutes. It's really slowing down my web-browsing and super annoying... How do I get it to go away?

    Take a look at this link, https://discussions.apple.com/message/16156214#16156214

  • I keep getting an error message there was a problem connecting to server.  URLs with the type "file" are not supported

    I keep getting an error messahe that says
    There was a problem connecting to the server.  URLs with type "file" are not supported
    Any ideas?

    Actually, in my case, turning off Time Machine didn't work. I had the same problem. We definitely traced it to Time Machine. The "Fix" was this: plugged in and designated different external HD as Backup volume. Then unplugged it and plugged in the original disc (after testing in in a different machine) and now the computer recognized it and error message stopped popping up. The Apple tech was as puzzled as I as to why this worked, but perhaps, forcing the machine to re-recognize it (or maybe even, gettting it recognized by a different machine first) somehow worked some magic.

  • Getting this error when saving: Names longer than 31 characters are not supported on the destination volume

    I've just tried to save a document in Pages and got this error
    Names longer than 31 characters are not supported on the destination volume
    Never had a problem like this before. I haven't changed disks or formatted disks. Running latest Yosemite 10.10
    The only reference I can find to this error on the internet says that it's for applications prior to OS X which I think we can discount.
    The only other reference I can find in the support community relates to one person with problems saving attachments in Mail and dates from early 2014.
    Can anybody give me a suggestion on what I might need to do?
    Thanks

    What format are you saving to?
    Where are you saving the files to and what is that volume formatted as?
    Have you tested with files from other applications, such as TextEdit?
    Peter

Maybe you are looking for

  • Locked out of my iphone, please help

    So I plugged my daughters iPhone into my iMac and restored my iPhones backup by mistake. The backup that was restored is very old and I have no idea what the passcode is. When I try to restore one of my daughter's backups i receive a message "Go to i

  • How to show multiple values for Unique records in Report

    Here's my question/problem: I've joined two tables, one table (TBL1) contains an object id (OBJ_ID) that repeats and the other table (TBL2) contains a date (DT), object type id (OBJ_TYP_ID), and object type description (OBJ_TYP_DES). The tables are j

  • How to distribute photos on a page when they are all smart objects

    Hi there, I have 5 images on a page in 3 columns, 2 each of 2 and 1 of 1 They are all Smart Objects that have been resized and cropped to fit the openings they now occupy. I've been sizing, aligning and distributing these things by eye but watched th

  • Cannot resolve "missing return statement error"

    Hi, I have a small code where the following message is received when I am trying to compile it: 61: missing return statement ^ 1 error I cannot figure out what is the source of the error. I appreciate any help in advance. Thanks THE FULL CODE: import

  • Assigning a Variable a Null Value

    Hi all. I've got a loop that queries a query outside of the loop. The problem is, the query may get defined, and it may not. But if it gets defined, how do I undefine it for the next loop iteration. Here's some code to wrap your head around it (edite