Bdc on plant maintenance for uploading equipment isolation
hello friends,
there is a requirement on bdc like u have to upload data with conditions
txn: wct1 .
condition ITEM CATEGORY
WHEN 'E'
UPLOAD isolation of equipment
WHEN 'F'
isolation of functional location
WHEN 'N'
isolation of free text.
please give me tht suitable coding logic .
suitable answer will be rewarded.
thx nishu.
Hi,
New Characteristics description wont come when ur assigning the class through classification for equipment using IE02.
You can assign the vallues for those characteristics assigned to particular calls which(class) is assigned to equipment.
Process is:
When ur creating class separately by using CL01 , where you have to assign the characteristics, so that when you are assigning that particular class to equipment what ever you assigned the characterisitcs to that class those characteristic discriptions only display.
So you can check in the class levele(CL01) whether it hase characteristics are not.
Similar Messages
-
Task list creation in plant maintenance.
Hi All,
I have the function module /ISDFPS/TASKLIST_CREATE which was used in my program under one more Z function module, we have a XI integration also here earlier we were using service pack SP10 so this program was working fine as integration with other interfaces was working fine.Now the client has upgraded to service pack SP14 and so the standard FM got one more parameter T_CUOB which was not mapped because in SP10 it was not available. Pls can anybody suggest me what is this parameter T_CUOB and what is the business significance of it.
The standard FM was used for creation of a task list in plant maintenance for Functional location, equipment etc.
Vishnu.Hi Vishnu,
I am just wondering if you got an answer to this question. We are having the same problem, but we do not care what the value is for t_cuob, therefore we need to default it to something like null or blank.
Thanks -
Error while result recording for test equipment
Dear Gurus
My scenario is to do unplanned maintenance for test equipment and recording the result.
For that I have done the following steps
1) Created Notification for the test equipment (customized notification type TE).
2) For that notification I created order. (customized order type TE01).
3) Attached General maintenance task list for that order. Task list has inspection point 300.
4) Released the order and saved. Inspection Lot is created.
5) In QE51N / QA32 when I tried to do results recording, it shows the following error.
"Equipment VERN01 do not exist in the object list for order 4001214"
Please help me to correct this error.
Regards
Babu RHi
I applied oss and today I got reply. When 1278254 notes is implemented it is solved.
I have one more question, now in QE51N, I did result recording and when saved it is asking for order confirmation, I have given all data and came back to the same screen. There is one more option for Valuate Inspection Point. In that I have selected Can be used option and saved. Now if I goto maintenance order and TECO the order, it is saying that A usage decision has stll to be made.
Whether I want to take UD once again in QA32 ?
Also is there any settings to TECO the notification automatically when the maintenance order is TECO'ed. Now the notification is not TECO'ed when order is TECO'ed.
Babu R -
BI - PM (Plant Maintenance Implementation & Extraction )
Hi Gurus,
Could help in implementing of PM(Plant Maintenance) in BI & BI Extraction for PM Module
Provide me what is the pre requisite for implementing PM in BW/BI
Thanks in Advance
VenkateshHi,
Plant Maintenace has its significance in SAP-BI
PM is the integration of MM,Production,SALES & Distribution,Controlling etc,.we will keep all these data ready and depending on the user requirement we will create reports on Plant Maintenance
for more details go through the below link given by SAP
http://help.sap.com/saphelp_47x200/helpdata/en/2b/1b713896fab752e10000009b38f889/frameset.htm
http://help.sap.com/printdocu/core/print46c/en/data/pdf/MYSAP/SR_PM.pdf
Regards,
Marasa. -
FM or BAPI to change Maintenance plant and Planning Plant for an equipment
Hi Experts,
I need to change the Maintenance plant and Planning Plant for an equipment. Is there FM or BAPI available for the same?
Thanks,
Peri.what doesn't it do the same ? it contains planning plant and maintenance plant which you can update ??
if you expect that SAP delivers custom functions for every possible question a developer has you can better search for an other job. SAP makes generic functions and you can use them for you're own sollutions.
it is also expected that you try to work things out for you're own sollution.
you can find sample code quickly enough if you search where the function is used
like RISTEQ01
kind regards
arthur -
What are the standard tables for plant maintenance in r/3
I need the list of standard tables for plant maintenance in r/3. and also
is there any way we can find the field name and table which it belongs to in r/3, based on the description of the field.I NEED THE FIELD NAMES FOR FOLLOWING FIELDS AND CORRESPONDING TABLE NAMES
Equipment status
registration number
insurance type
insurance type description
registration date
expiry date
insurance companies
expiry date
policy number
amount insured
premium paid
created by ..so ..on
for our report in PM .. insurance data report
THANKS -
How to claim the insurance of equipment in sap plant maintenance
Hi,
I have a question for you, in our company with lots of equipment's. Insurance has done for some equipment's, how to claim the insurance using plant maintenance. Kindly let me know the process how to claim the insurance of an equipment.
looking for your valuable information
Thanksmohan kumar
This is an interesting requirement - I've never seen a process to cover insurance using the PM module.
You could follow the warranty process to claim insurance.
Alternatively, talk to you Finance team to see what they recommend.
PeteA -
Warranty for materials in Plant Maintenance
Hi Experts
I am trying to explore how warranty could be used for spare parts in PM. I did following and seems that it works the same way as it works for equipment . meaning that it shows a dialog box when creating Notif and order.
Step1: Create Material Master
Step 2: Create Material Serial Number (Equipment master is created in background)
Step 3: Add warranty information in equipment
Step 4: Create Notification or work order, the warranty information is displayed
My Questions is on Goods movement and benefit by using serial number. I have created 03 serial numbers (1,2 and 3) by using TX IQ01. I have two cases:
Case1: what are the benefits of serial numbers created above without activating serial numbers in Inventory management. How it helps in Plant maintenance
Case2; Assming we activate serial number mgmt in IM ( by assigning serial no profile in material master). How does the serial numbers created above (1,2 and 3 by using IQ01) tie to Inventory management serial numbers. When I receive material for a purchase order how the serial numbers are assigned and tie to serial numbers created by IQ01.
Appreciate your help. Let me know if I am not clear.
Thanks
Gauravthx
-
Plant Maintenance wether we can consider the power consumption of equipment
hi
In plant maintenance the client want to know the power consumption of each m/c ie is equipment if it is possible then how what are steps and where i have to enter that data. pls guide ushi Navin,
Create the measuring point for machine and then ask user to create the measuring document to capture the power consumption.
i hope it will help.
Regards,
Manish -
Hello everyone,
In plant maintenance, does anyone know how to setup automatic settlement rule assignment for work orders? We know how to do it for internal orders already but the concept doesn't work for work orders. We are on release 4.6C
Thanks,
Chrishi
while maintaining the settlement profile you can define the default oject categors as CTR and in the equipment master you have to specify the cost center, and if you create maintenance order then settlement rule will be automatically created
if you want some specific cost center as default irrespectiv of equipment then you have to use the customer exit
IWO10027 User exit: Generate user-defined settlement rule
regards
thyagarajan -
What is the Tcodes for Uploading of data using BDC & CATT
PP members:
I was going through the <b>cutover activities</b> , and what I understood is we transfer all the legacy system data into SAP before going live
The data upload follows certain steps (depends on the organizational design load strategies)
First we upload all the master data ( material master, BOM, W/C's & Routings)
Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as <b>materials of the previous stage</b> and necessary adjustments shall be made after cutover day
At this point, I could not able to understand what does the author mean <b>materials of the previous stage</b>
Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
Is it a must to use <b>only LSMW tool</b> to upload master data or any other upload tools are fine
Lastly,. I am not sure about the Tcode of CATT & BDC
Summary of the questions:
1.What does the author mean <b>material of previous stage</b>, for WIP materials during cutover activities
2. Is it mandatory to use only LSMW tool for uploading for master data
3. What are the Tcodes for upload tools CATT & BDC ?
Thanks for your time
Suren RDear,
1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM. -
Creating Z report for material stock (plant maintenance module)
hello,
we are implemented Plant maintenance module (SAP PM) in our organization.
our requirement is to create a stock report which will incldue
followings:-
1)material number
2)plant number
3) storage location
4) material type
5)valuation type
6)Opening Stock
7) OpValue
8)Received Stock
9) ReceiptValue
10) Issue Stock
11) IssueValue
12) Closing Stock
13) Closing Value
we want above details in ALV grid format.
to gert all the details for perticular material, we calcute closing stock and closing value in following manner:-
opening stock + received stock - issue stock = closing stock
opening value + recipt value - issue value = closing value
we are unable to find table name for accessing opening stock, received stock , issue stock & opening value ,recipt value , issue value from system. please suggest table name information for getting above details for creating Z reportDear friend,
Before to make a decision to bulid a custom report make sure you have checked out the following standard transactions:
MB5T Stock in Transit
MMBE Stock Overview
MD04 Stock/Reqs list
MB53 Plant Stock Availability
MB52 Warehouse Stock
MB5M Expiration Date list
MB5B Stock for Posting Date
MB5T Stock in Transit
MBBS Valuated Special Stock
MBLB Stock with Subcontractor
The possible tables are:
MARA, MARD, MARC, VBEP, VBAK(VBAP), EKKO(EKPO), EKBE, EBAN, EBEW, MSEG, MKPF,...
Good luck! -
Goods issue for plant maintenance order
Goods issue with ref to plant maintenance order( Componenets of the order) is not possible in transaction code MIGO. Error message " MIGO is not possible for the refurbishment order".
Goods issue for the same order can be posted with transaction MB!A.hi santhosh
kindly check the order type .i think you are using MB1A for refurbishment process.but it is not possible.only maintenance order can be posted via MB1A
follow the procedure for goods issue in refurbishment order.
Choose Logistics ® Plant maintenance ® Maintenance processing ® Completion confirmation ® Goods movement ® Goods movement.
The entry screen for a goods issue appears.
Choose the pushbutton For order.
Enter the relevant order number in the dialog box and choose Continue.
An entry screen appears.
Choose Copy.
The Maintain Serial Numbers dialog box appears.
Choose Reference document.
Enter the order number in the Refurbishment order group box and choose Execute.
A list appears with the planned serial numbers for the refurbishment order.
Check the selections of serial numbers, for whose material you want to post a goods issue, and choose Copy.
The serial numbers are copied into the Maintain Serial Numbers dialog box.
Choose Exit window.
The goods issue is posted.
regards
thyagarajan -
Settings for costing data in order types for plant maintenance
i want to know the purpose of settings for costing data in order types for plant maintenance. do we need to do it for sure i mean are those settings mandatory to analyze the costs on work order
Yes you need to maintain those settings, as the plant maintenance orders are also considered as cost objects and in order for you to post any cost, you need to have a cost object. Unless you maintain these settings, the cost you posted cannot be settled to a cost center.
Assign points as a way to say thanks.
Madhav Nanduri -
Origin Object Type for Plant Maintenance Orders in Profit Center Accounting
Hi,
I want to make a selection for plant maintenance orders in transaction KE5Z, report for line items in Profit Center Accounting. When checking possible input options for the selection field <b></b>Origing Object Type<b></b> the system shows value 15 for Maintenance Orders. However I discovered in our system the maintenance orders are reported as Origing Object Type 03, which is Overhead Orders according to the selection list. So I cannot distinguish between overhead orders and maintenance orders in this report.
What is the cause our maintenance orders are assigned to Origin Object Type 03 in stead of 15 and what is the customizing transaction to correct this ?Looks like, this is no longer supported. Refer to note 168004 and 102434.
Cause and prerequisites
These functions were not programmed to meet the above requirements.
As of Release 4.0, the object type is transferred directly.
Solution
Once you have implemented the advance correction. the origin object type 'Overhead cost order' (03) is assigned irrespective of what is the SCOPE for orders.
As a result of implementing this note or as of Release 4.6B, the order category distinguishes between overhead cost orders and production orders in the origin object type. In this case, the following origin object types result (as described above in 1.):
Order category 04 to 10, 40 => 04 (production order)
All other order categories => 03 (overhead cost order)
The logic that the origin object type was set depending on the object class (as described above in 2.) is no longer supported. The object class can be evaluated separately in Reporting. -
The corrections of this note refer in Release 4.0B to the corrections from Note 102434.
Maybe you are looking for
-
hi , i cant update mi ipod touch software, a soon as the download process in finished an error message appears :" session time has expired" something like that
-
Design view in DreamWeaver CS3 disabled for CSS & Java
I currently use Adobe Dreamweaver CS3, and only some files have the option to view them in code AND in design view. This works for most files (HTML, PHP, etc). However, anytime I create a new CSS or Java file, the design view is disabled: I have alre
-
The display on my MacBook Air has recently started flashing. Are there any fixes that I might try before sending it in for repair?
-
Hi, We configured SAP authentication to manage data access in the BW system. When using authorization variables the universe is returning the values for which the user is authorized. We now wonder whether it is possible to connect to multiple BW syst
-
Dear Expert, We are using EP 7 with java web dynpro. As for the malaysia and singapore payslip, we are able to view using the dynpro provide by the standard business package. However when it comes to the indonesia payslip, it is showing empty figure