BDC to update CAT2 transaction.one issue while updating CAT2 transaction

Good Day Friends,
i have one issue while updating CAT2 transaction,
i have enhnced 3 custom fields in CAT2 tx-code. while updating through manually the data is getting stored in CATSDB tx-code for this i have done validation in enhamcement spots ECC 6.0.
but when i am running bdc this custom field data is not updating in CATSDB table.
my dout is will  BDC work for enhancement spots or not , also please suggest if you have any idea ?

Hi,
Usually I am trying to avoid BDC. So I would try to use BAPIs BAPI_CATIMESHEETMGR_INSERT and BAPI_CATIMESHEETMGR_CHANGE. Similar to other BAPIs, you can pass values for your extended fields using table EXTENSIONIN. It's described in BAPI's documentation or look for EXTENSIONIN on SDN. The principle is same for all BAPIs.
Regards

Similar Messages

  • Issue while updating field SCHZU (shift Premium) in table view  V_T508A

    Hi All,
    I am facing an issue while updating the field SCHZU(Shift premium) in Table view V_T508A.For some WSR entries when i am trying to update the shift premium say with a value 19400,the value is accepted.However for some other WSR entries,the value for shift premium gets modified to 19.400.Can someone please let me know why this error is occuring and how to rectify the same.
    Regards,
    Punam Jha

    usually its a percentage value. please check what value you enter

  • Reg : BDC issue while updating infotype 40 inside BADI class method

    Hi Friends,
         Actually in my badi class, there is a method where i need to save the infotype fields including comment fields.. So with BDC recording i recorded screen fields and passing the pernr internal table values to recorded pernr values.. by doing this im getting error and so BDC is not upadting the data.. moreover if i pass directly pernr number within single quotes, BDC is working fine and data is getting updated..
    bdc_field        'RP50G-PERNR'   pernr.  --> Error Message while calling transaction through BDC
    bdc_field        'RP50G-PERNR'   '00001234'  ---> updating successfully..
    1. Tell me whether the issue is with BADI or wat ? means we cant able to use BDC inside badi ?
    2. I also tried changing my internal table value of pernr to type 'C' of length 8.. eventhough its showing error..
    Please tell me what i need to do .... ?

    Hi  Dilek Ersoz Adak ,
      I also tried with that, but getting same error..  Below is my error im getting while updating BDC through call transaction,
    1     PA30     SAPMP50A     1000     E     K     PBAS_SERVICE     001     HRADMIN     EPPRELE 00000121     HRAdministrator          CTU     RP50G-PERNR
              Person is treated already by the HR Administrator

  • Issue while Updating a table having Unique Secondary Index

    Hi,
    I am trying to update a 'Z' table in which there are 5 fields comprising of primary key. Out of them 2 key fields are defined as a part of seconadry index with 'Unique' option selected.
    As per the requirement, I am trying to update the table using modify statement so whenever this statement occurs it will check the primary keys and accordingly try to m

    958572 wrote:
    Hi,
    We have observed the exception *'JDBC activity timed out while updating the table -Table1"* in our logs in prod environment.
    1)we verified the AWR report for that particular time and observed that one update statement was trying to update the table table1.
    its a simple update statement as below
    UPADTE TABLE1 SET COL1=VAL1,COL2=VAL2 WHERE ID1=VAL1 AND ID2=VAL2;
    there is a PK index on ID2 column.
    2)we also came to know that there were no locks on TABLE1 during this time.
    can some one please let me know what could be the possible reason for this kind of exception?
    ThanksOS/Networking mis-configuration.
    Oracle does not know or care about the type or flavor of remote client (JDBC, OCI, ODBC, etc).
    Oracle's default configuration contains no timeout.
    I suspect a FireWall setting.

  • Issue while updating(Changing) quantity on line at quick sales order form

    Hi,
    I am facing a issue while changing quantity ordered on the order line in quick sales order form. (R12.1.3)
    Although the same logic works exactly as required in 11.5.9.
    There is a custom logic, post booking line status is Awaiting Shipping.
    Now when quantity is changed +(Saved), the status changes to a custom state but at the same time a new row is created with the same line id but different reservation id in the MTL_RESERVATIONS.
    The quantity here is the difference between the original quantity and the new entered quantity.
    And post completion of the custom logic the original row is updated, but being there a additional row the quantity reserved at the shipping tab comes wrong.
    Our requirement is of update which is happening but not the additional insert which is going into MTL_RESERVATIONS.
    The logic is perfect in 11.5.9 and no additional insert is being made.
    Kindly help and give some ideas for the possible reason the issue.
    Please ask for more information if required.
    Thanks,
    Vishal

    Hi Mahendra,
    I have gone through the note id that you have given. sorry to say that, that is refering to diffrent issue.
    Actually what i did is, At form header level, I have hide the fileds using the folder options. once after changes I have closed the form and re-opened it. by that time I can see that Button names got changed in bottom of the "Quick sales order form". Not sure how it become changed. there five buttons over the form, only two button names got changed.
    Kindly suggest any other options.

  • Hi.. one issue while woking in SAP Script

    HI,
    i have one issue.. i have to copy and Develop a SAP Script from the STANDARD Script.
    SD_EXPORT_FUSD
    in the Script.. The window F009 is getting printed..
    in which i have written one variable &V55ENAFT-KZGBE&
    After <F3>9. METHOD OF TRANSPORTATION</> <F6>(Specify)</>
    When i debug.. the value is there in V55ENAFT-KZGBE but the value is not getting printed in SAP Script..
    Can anyone please help me....
    Thanks & Regards
    Guhapriyan

    Hi Guhapriyan,
       Is the text "9. METHOD OF TRANSPORTATION" getting displayed. Check that, if it is not just increase the size of the window, coz if value is there for V55ENAFT-KZGBE definitely it will be displayed in the script. The problem should be with the size of the window.
    Reward if helpful.
    Regards,
    Tushar
    Message was edited by: Tushar  Marshall Dass

  • Itunes showing No sim Card issue while updating to ios 6.1

    Please help me out in upgrading my phone to IOS 6

    Hello SharjeelK,
    We've an article that can help get your iPhone updated.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Cheers,
    Allen

  • Issue in Transact Move order while updating serial number

    Hi All,
    We need to perform sales order issue of items present in particular subinventory.
    I am successful in creating sales order having one item .
    I did the pick release of the order using the api ,wsh_picking_batches_pub.create_batch and wsh_picking_batches_pkg.submit_release_request to release the batch.
    A move order got created , now I need to allocate the serial number for processing the move order,I used the below script to update the line record with incoming start and end serial number.
    But the api is throwing error .
    DECLARE
    -- Common Declarations
       l_api_version      NUMBER                                 := 1.0;
       l_init_msg_list    VARCHAR2 (2)                          := fnd_api.g_true    ;
       l_return_values    VARCHAR2 (2)                         := fnd_api.g_false;
       l_commit           VARCHAR2 (2)                         := fnd_api.g_false;
       x_return_status    VARCHAR2 (2);
       x_msg_count        NUMBER                                 := 0;
       x_msg_data         VARCHAR2 (255);
       -- WHO columns
       l_user_id          NUMBER                                 := -1;
       l_resp_id          NUMBER                                 := -1;
       l_application_id   NUMBER                                 := -1;
       l_row_cnt          NUMBER                                 := 1;
       l_user_name        VARCHAR2 (30)                          := 'OPERATIONS';
       l_resp_name        VARCHAR2 (30)          := 'MFG_AND_DIST_SUPER_USER_APS';
       -- API specific declarations
       l_header_id        NUMBER                                 := 0;
       l_trohdr_rec       inv_move_order_pub.trohdr_rec_type;
       l_trohdr_val_rec   inv_move_order_pub.trohdr_val_rec_type;
       l_trolin_tbl       inv_move_order_pub.trolin_tbl_type;
       l_trolin_val_tbl   inv_move_order_pub.trolin_val_tbl_type;
       x_trolin_tbl       inv_move_order_pub.trolin_tbl_type;
       x_trolin_val_tbl   inv_move_order_pub.trolin_val_tbl_type;
       x_trohdr_rec       inv_move_order_pub.trohdr_rec_type;
       x_trohdr_val_rec   inv_move_order_pub.trohdr_val_rec_type;
    -- Cursor to load Move Order Headers
    -- CURSOR c_mo_hdrs IS
    -- SELECT * FROM my_custom_move_order_hdrs ;
    BEGIN
       fnd_global.apps_initialize (5939, 50625, 20003);
       mo_global.init ('INV');
       -- call API to create move order header
       DBMS_OUTPUT.put_line
                       ('=======================================================');
       DBMS_OUTPUT.put_line ('Calling INV_MOVE_ORDER_PUB.Get_Move_Order API');
       inv_move_order_pub.get_move_order (p_api_version_number      => l_api_version,
                                          p_init_msg_list           => l_init_msg_list,
                                          p_return_values           => l_return_values,
                                          x_return_status           => x_return_status,
                                          x_msg_count               => x_msg_count,
                                          x_msg_data                => x_msg_data,
                                          p_header_id               => 7360068,
                                          p_header                  => NULL,
                                          x_trohdr_rec              => l_trohdr_rec,
                                          x_trohdr_val_rec          => l_trohdr_val_rec,
                                          x_trolin_tbl              => l_trolin_tbl,
                                          x_trolin_val_tbl          => l_trolin_val_tbl
       DBMS_OUTPUT.ENABLE ();
       DBMS_OUTPUT.put_line
                        ('=======================================================');
       DBMS_OUTPUT.put_line ('Return Status: ' || x_return_status);
       IF (x_return_status <> fnd_api.g_ret_sts_success)
       THEN
          DBMS_OUTPUT.put_line ('Error Message :' || x_msg_data);
       END IF;
       -- Print the Move Order Header/Lines to be processed
       IF (x_return_status = fnd_api.g_ret_sts_success)
       THEN
          DBMS_OUTPUT.put_line (   'Header :'
                                || l_trohdr_rec.header_id
                                || ' '
                                || l_trohdr_rec.request_number
                                || ' '
                                || l_trohdr_rec.date_required
                                || ' '
                                || l_trohdr_rec.from_subinventory_code
                                || ' '
                                || l_trohdr_rec.header_status
                                || ' '
                                || l_trohdr_rec.organization_id
                                || ' '
                                || l_trohdr_rec.status_date
                                || ' '
                                || l_trohdr_rec.to_subinventory_code
                                || ' '
                                || l_trohdr_rec.transaction_type_id
                                || ' '
                                || l_trohdr_rec.move_order_type
                                || ' '
                                || l_trohdr_rec.operation
          l_trohdr_rec.from_subinventory_code := 'CustRet';
          --l_trohdr_rec.to_subinventory_code := 'Staging';
          l_trohdr_rec.operation := inv_globals.g_opr_update;
          DBMS_OUTPUT.put_line (   'Header Update :'
                                || l_trohdr_rec.header_id
                                || ' '
                                || l_trohdr_rec.from_subinventory_code
                                || ' '
                                || l_trohdr_rec.to_subinventory_code
                                || ' '
                                || l_trohdr_rec.operation
          FOR i IN 1 .. l_trolin_tbl.COUNT
          LOOP
             DBMS_OUTPUT.put_line (   'Line '
                                   || i
                                   || ': '
                                   || l_trolin_tbl (i).line_id
                                   || ' '
                                   || l_trolin_tbl (i).line_number
                                   || ' '
                                   || l_trolin_tbl (i).line_status
                                   || ' '
                                   || l_trolin_tbl (i).organization_id
                                   || ' '
                                   || l_trolin_tbl (i).inventory_item_id
                                   || ' '
                                   || l_trolin_tbl (i).from_subinventory_code
                                   || ' '
                                   || l_trolin_tbl (i).to_subinventory_code
                                   || ' '
                                   || l_trolin_tbl (i).quantity
                                   || ' '
                                   || l_trolin_tbl (i).status_date
                                   || ' '
                                   || l_trolin_tbl (i).uom_code
                                   || ' '
                                   || l_trolin_tbl (i).operation
             l_trolin_tbl (i).from_subinventory_code := 'CustRet';
             --l_trolin_tbl (i).to_subinventory_code := 'Staging';
             --l_trolin_tbl (i).inventory_item_id := 19128;
             l_trolin_tbl (i).serial_number_start := '356030032497361';
             l_trolin_tbl (i).serial_number_end := '356030032497361';
             --l_trolin_tbl(i).quantity       := l_trolin_tbl(i).quantity
             l_trolin_tbl (i).operation := inv_globals.g_opr_update;
             DBMS_OUTPUT.put_line (   'Line Updated'
                                   || i
                                   || ': '
                                   || l_trolin_tbl (i).line_id
                                   || ' '
                                   || l_trolin_tbl (i).from_subinventory_code
                                   || ' '
                                   || l_trolin_tbl (i).to_subinventory_code
                                   || ' '
                                   || l_trolin_tbl (i).serial_number_start
                                   || ' '
                                   || l_trolin_tbl (i).serial_number_end
                                   || ' '
                                   || l_trolin_tbl (i).operation
          END LOOP;
       END IF;
       DBMS_OUTPUT.put_line
                        ('=======================================================');
       -- call API to create move order header
       DBMS_OUTPUT.put_line
                        ('=======================================================');
       DBMS_OUTPUT.put_line ('Calling INV_MOVE_ORDER_PUB.Process_Move_Order API');
       inv_move_order_pub.process_move_order
                                           (p_api_version_number      => l_api_version,
                                            p_init_msg_list           => l_init_msg_list,
                                            p_return_values           => l_return_values,
                                            p_commit                  => l_commit,
                                            x_return_status           => x_return_status,
                                            x_msg_count               => x_msg_count,
                                            x_msg_data                => x_msg_data,
                                            p_trohdr_rec              => l_trohdr_rec,
                                            p_trohdr_val_rec          => l_trohdr_val_rec,
                                            p_trolin_tbl              => l_trolin_tbl,
                                            p_trolin_val_tbl          => l_trolin_val_tbl,
                                            x_trohdr_rec              => x_trohdr_rec,
                                            x_trohdr_val_rec          => x_trohdr_val_rec,
                                            x_trolin_tbl              => x_trolin_tbl,
                                            x_trolin_val_tbl          => x_trolin_val_tbl
       DBMS_OUTPUT.put_line
                        ('=======================================================');
       DBMS_OUTPUT.put_line ('Return Status: ' || x_return_status);
       IF (x_return_status <> fnd_api.g_ret_sts_success)
       THEN
          DBMS_OUTPUT.put_line ('Error Message :' || x_msg_data);
          ROLLBACK;
         ELSE
         COMMIT;
       END IF;
       DBMS_OUTPUT.put_line
                        ('=======================================================');
    -- END LOOP;
    EXCEPTION
       WHEN OTHERS
       THEN
          DBMS_OUTPUT.put_line ('Exception Occured :');
          DBMS_OUTPUT.put_line (SQLCODE || ':' || SQLERRM);
          DBMS_OUTPUT.put_line
                       ('=======================================================');
    END;
    Error Log
    =======================================================
    Calling INV_MOVE_ORDER_PUB.Get_Move_Order API
    =======================================================
    Return Status: S
    Header :7360068 7360067 15-JUL-13  7 281 15-JUL-13   3
    Header Update :7360068 CustRet  UPDATE
    Line 1: 6730069 1 7 281 19119  Staging 1 15-JUL-13 UN
    Line Updated1: 6730069 CustRet Staging 356030032497361 356030032497361 UPDATE
    =======================================================
    =======================================================
    Calling INV_MOVE_ORDER_PUB.Process_Move_Order API
    Inv Item Id19119
    Old Inv Item Id19119
    Inv Item Id-356030032497361
    Item Id
    Org Id281
    Serial Number356030032497361
    =======================================================
    Return Status: E
    Error Message :INV_INV_INVALID_ATTRIBUTE_N_ATTRIBUTE_Start serial number
    Please help to solve the issue.
    Thanks,
    Shruti K. Nayak

    Hello Ganesh,
    Hope you have passes this issue.
    I am in the same boat, I need to find out the APIs to update the serial numbers on order at the time of allocation/transact move order step.
    Could you please help me with the process/steps/sample code involved in this.
    Thanks in advance!
    Raj

  • Document splitting issue while posting MIRO transaction

    Hello All
    I have a piculiar  related to document splitting while posting MIRO entry and this issue started after defaulting the profit center
    to the tax gl.
    The scenario is like this
    While posting a vendor invoice document where there is a difference in the invoice value and stock is allready consumedn
    hence system will try to post the difference to the material difference account.
    The following is the asccounting entries
    01 vendor a/c  cr   1000
    02 gr/ir a/c  dr         800       pc from po document
    03 tax g/l                 180       default pc
    04 inventory diff       20  
    the error message
    system is not able to determine the profit center at  line item 04 and message is
    Balancing field "Profit Center" in line item 004 not filled
    The document splitting settings are all standards related to vendor invoice ..................
    One important point to be noted here is that this issue is come after defaulting the profit center at tax gl.
    But we cannot remove those default pc also.
    Can be their any solution on this
    Kindly suggest
    Thanks

    Hi
    In addition to my previous mail i want to add that
    i tried to add even expense item category to splitting rule of business transaction and transaction variant.
    Even then it doers not work.
    other then is as per standard document splitting rule the expense item category is not included in invoice verication buisness transaction.
    Thanks
    alok

  • Issue while updating

    I have a table which has a column containing text with multiple lines.while i am trying to update that column i am facing the issue
    "Dear User,
    Enclosed is the attachment.
    Please direct problems at 209876534 or
    [email protected]
    Regards,
    Developement team"
    update t1 set c1="Dear User,
    Enclosed is the attachment.
    Please direct problems at 209876534 or
    [email protected]
    Regards,
    New developer group"
    Above update statement is not working.
    Looking for your help
    Thanks

    user518809 wrote:
    I have a table which has a column containing text with multiple lines.while i am trying to update that column i am facing the issueWhat is the column type? If varchar2, then only 4000 bytes worth of characters can be stored in it.
    Also, it is crititcal! to performance that you use bind variables. Do not use literal values in SQL! That is the #1 reason for poor Oracle performance.
    This is what your client software should be doing (using SQL*Plus) to demonstrate.
    Step 1 . Create a bind variable:
    SQL> var colValue varchar2(4000)Step 2. Assign a value to the bind variable:
    SQL> exec :colValue := '...<your string of text comes here>..';Step 3. Execute the SQL using that bind variable:
    SQL> update t1 set c1 := :colValue;Of course, the update statement will update all rows in the table. So you likely need to add a predicate (using a bind variable) to specify which specific row you want to update.
    And note that this is the correct way to do it. Not using bind variables is the wrong way to do it.

  • Issue while updating vacancy details through 'RH_UPDATE_DATABASE'

    Hi,
    i am trying to update the vacancy details through a Zprogram.
    This zprogram updates the infotype 1007 correctly which is done by:
    CALL FUNCTION 'RH_INSERT_INFTY'
        EXPORTING
          fcode               = 'INSE'
          vtask               = 'B'
        TABLES
          innnn               = lt_1007   " lt_1007 has all the values for updation.
    After this i am calling the fm :
      CALL FUNCTION 'RH_UPDATE_DATABASE'
          EXPORTING
            vtask     = 'S'
          EXCEPTIONS
            corr_exit = 1
    This updates the infotype 1007 in the database but the vacancy table T750X is not updated.
    However if i run the zprogram in foreground, this FM 'RH_UPDATE_DATABASE' updates infotype 1007 and also the table T750X. But in background mode only infotype 1007 is being updated and not T750X.
    Please let me know if any idea on how to solve this.
    Thanks.

    any inputs on this if any one had the same issue using 'RH_UPDATE_DATABASE'.

  • Filesystem issues while updating

    I can't upgrade community repository because some file on my harddisk does not like to be removed.
    [root@senna frank]# pacman -Sy
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community 366.9K 1084.6K/s 00:00:00 [###########################################################################] 100%
    error: could not remove database entry communitygnomebaker
    error: failed to update community (could not remove database entry)
    testing is up to date
    When I manually try to remove this file:
    [root@senna gnomebaker-0.6.2-1]# pwd
    /var/lib/pacman/sync/community/gnomebaker-0.6.2-1
    [root@senna gnomebaker-0.6.2-1]# ls
    depends
    [root@senna gnomebaker-0.6.2-1]# rm -vRf depends
    rm: cannot remove `depends': Operation not permitted
    Strace:
    [root@senna gnomebaker-0.6.2-1]# strace rm -vRf depends
    execve("/bin/rm", ["rm", "-vRf", "depends"], [/* 35 vars */]) = 0
    brk(0) = 0x8c11000
    access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
    open("/etc/ld.so.cache", O_RDONLY) = 3
    fstat64(3, {st_mode=S_IFREG|0644, st_size=53084, ...}) = 0
    mmap2(NULL, 53084, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7eea000
    close(3) = 0
    open("/lib/libc.so.6", O_RDONLY) = 3
    read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 h\1\0004\0\0\0\200"..., 512) = 512
    fstat64(3, {st_mode=S_IFREG|0755, st_size=1554407, ...}) = 0
    mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7ee9000
    mmap2(NULL, 1336912, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7da2000
    mprotect(0xb7ee2000, 4096, PROT_NONE) = 0
    mmap2(0xb7ee3000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x140) = 0xb7ee3000
    mmap2(0xb7ee6000, 9808, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7ee6000
    close(3) = 0
    mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7da1000
    set_thread_area({entry_number:-1 -> 6, base_addr:0xb7da16c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
    mprotect(0xb7ee3000, 8192, PROT_READ) = 0
    mprotect(0xb7f14000, 4096, PROT_READ) = 0
    munmap(0xb7eea000, 53084) = 0
    brk(0) = 0x8c11000
    brk(0x8c32000) = 0x8c32000
    ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0
    lstat64("/", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    lstat64("depends", {st_mode=S_IFREG|0644, st_size=115, ...}) = 0
    unlink("depends") = -1 EPERM (Operation not permitted)
    write(2, "rm: "..., 4rm: ) = 4
    write(2, "cannot remove `depends'"..., 23cannot remove `depends') = 23
    write(2, ": Operation not permitted"..., 25: Operation not permitted) = 25
    write(2, "\n"..., 1
    ) = 1
    close(0) = 0
    close(1) = 0
    close(2) = 0
    exit_group(1) = ?
    Does anyone have a clue what I can do about this?
    It's been a while since I updated community now

    lucasdemarchi wrote:
    I believe it's related to this file's attributes. Issue "lsattr" in  this file and see if there's an "i" attribute. If so, change it:
    chattr -i filename
    From chattr's man page:
    A file with the `i' attribute cannot be modified: it cannot be deleted or renamed, no link can be created to this file
    and no data can be written to the file. Only the superuser or a process possessing the CAP_LINUX_IMMUTABLE capability
    can set or clear this attribute.
    regards
    You are my hero
    Worked like a charm.
    Now I can update community again

  • 7210 supernova detection issue while updating soft...

    i want to update my  nokia 7210 supernova, bcz it doesn't start properly. therefore i can't update it while setting it powered on.
    the issue is that it turns off after nokia start up tone when ever i power it on.
    any help plz....
    i need my phone working properly as quick as possible

    the issue is that it turns off after nokia start up tone when ever i power it on.
    /t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/td-p/398147
     jje

  • Dummy Profit center issue while posting the transaction in FB60

    Dear SAP friends,
    We have implemented ECC6.0 version,
    I have the below issue:
    I am posting the document in FB60 transaction: after simulating the document system is throwing the error "Profit center 9937/FIREPRODMY does not exist for 14.08.2009"
    Message no. KM700
    Document spilitting active at Business area level..
    In 0KE5( maintain controlling area settings) I have not given the Dummy profit center.
    Eventhough it is asking for Dummy profit center while posting, Please let me know apart from the 0Ke5 settings do i need to remove the dummy profit center anywhere in the Config.
    I have not maintained any settings in FAGL3KEH, 3KEH and OKB9.
    No sunstitutions are active in the system.
    Please let me know from where i need to remove the dummy profit center.
    My client going live on 17th Aug 2009.
    Regards,
    Anand

    Hi,
    Check the validity period of the Profit Center 9937/FIREPRODMY. The valid from period should have the date same or earlier than 14.08.2009
    If not then change the profit center master data to be valid from an earlier date (Tcode KE52). Steps-
    KE52 - Profit Center FIREPRODMY
    Click Change Validity Period (Ctrl +F1)
    Valid from - put a date earlier or equal to 14.08.2009
    Click Activate (Shift + F1)
    Thanks,

  • CRM to ECC: Controlling Integration Issue while saving Service Transactions

    Hi,
    We have configured all CRM service functionalities with ECC integration. We have also set up controlling integration following best practices document.
    We are getting the following error whenever we try to save any service transaction (Service Contract or  Service Order).
    u201CAn error occurred in system XXXXECC during account assignmentu201D
    u2022     Errors in prerequisite object Item 2000000042/100 (Notification E IAOM 026)
    u2022     Collector posting not allowed on account (Notification E YAM_RE 013)
    Please help to resolve this issue.
    Thanks,
    Prish

    Hi Ashish,
    Could you please tell me how do we assign the debit memo request to the internal order.
    I am creating a debit memo request from the confirmation. the debit memo request doesnt have the internal order number that was created in ECC. And hence, I am not able to post the revenue from the confirmation to the internal order.
    Could you please help.
    Regards,
    Itisha

Maybe you are looking for