BDT & EEWB

I am working on a task to add custom fields to a standard SAP BP tab.  I was going to use EEWB to update BUT000 and create the custom tab in BP, then use BDT to move the fields over to the SAP standard tab.  I have never done this before, so here are my questions.
1. After I use EEWB to add the fields to the table/screen, will I need to add code to the BADI? Or, can I take care of the rest with BDT?
2. Is a combination of BDT and EEWB the best way to accomplish my goal?
3. If so, please clarify what part of this development do I use EEWV for, and what part do I use BDT for?
Thanks for your help. It is greatly appreciated!
Regards,
Jason

Hi
You can do this using BDT. Remove the Section from the Screen of Custom Tab and Attach this section to the Tab where you want . Its very simple.
Any problem Let me know
Regards
Mithlesh

Similar Messages

  • EEWB vs BDT

    Hi,
    What's the major differences between EEWB and BDT?.
    EEWB is used to add customer specific fields to DB and these automatically appear on the business transactions.
    Can we use EEWB to add customer specific fields to standard tab instead of customer tab?
    My understanding of BDT is mainly for screen configuration. Can we use BDT for any business object in CRM other than Business Partner(BUPA)?
    If we can perform complete screen enhancement using the above two tools, what is the purpose of VCT(Visual Config Tool)?
    Thanks & Regards
    Kamal

    Hi,
    actually, the EEWB uses the BDT to enhance the standard in a generic way. The functionality of BDT is larger then EEWB, which can only be use to add fields to the GUI.
    BDT can also be used for additional logic etc...
    The EEWB can not be used to add fields to the standard tab. SAP locks its standard because it tries to prevent issues when upgrading, so it's difficult to add fields to standard transactions/screens.
    The BDT (business data toolset) is limited to a number of objects defined in it. Business transactions it not one of them. As far as I know, in CRM, it's limited to Business partners & relationships.
    Michael.

  • EEWB: BDT Compare

    Hi all,
    we have done some changes to BUPA with EEWB. We have used EEWB for this before, so now we are doing changes to existing EEWB projects.
    When transporting to Q&A we get problems, some screens in BP (regarding other EEWB projects that has also been changed in parallell...) are not showing up properly, but the dictionary/program objects seems to be in place correctly.
    We found program BDT_COMPARE where it seems that you can create a Customizing transport with settings that are missing in Q&A compared to DEV system. These entries seem like they could actually be good stuff.
    Has anyone used this report before who can verify that this could be the solution? We don't want to transport if we mess things up even more..
    Any answer most appreciated!
    Best regards,
    Henrik

    Hi
    You can do this using BDT. Remove the Section from the Screen of Custom Tab and Attach this section to the Tab where you want . Its very simple.
    Any problem Let me know
    Regards
    Mithlesh

  • Need to add extra fields in Custom tab  using EEWB.

    hi ,
    I extended business partner with 10 custom fields using EEWB by creating an custom tab. I would like to add 2 more fields in the same custom tab . I am unable to find the provision to add new field to the existing project. so i am deleting the existing project and creating new project and adding all the =and new fields.
    Now when I am creating new project  i am loosing the old field names. It creating the new fields with new field names.
    My requirement is I should create a new fields without changing the old field names.
    So Please can any one help me as how to approach these without deletion or changing the existing field names.
    Finally my custom tab should contain 12 fields.
    Thanks
    viswa

    Hi viswa,
    I have a requirement to add 2 new fields to the Standard Transaction (called <b>BP</b> ).
    I have gone through various concepts like <b>EEWB and BDT</b> tools. But, still I am not able to get the things well.
    So please provide me with the procedure to explore things and work on the requirement.
    Thanks in advance.
    Regards,
    Vishnu.

  • How to extend an address of a BP  with more fields ???? EEWB??

    Hi Gurus,
    I need to extend the address of a BP with some customer fields. I have tried to do it using EEWB but when you have to choose a Business Object for the new extension, the reasonable only possibility is to choose BUPA Object. Thus, the DB table BUT000 is extended with a custom include that contains the customer fields, but what I want to do is extending ADRC DB table. There is some way that I do not know of achieve this in which the system creates automatically all the FM for the BDT events????
    If it is not possible, which would be the procedure to do that with my own development???
    Thanks in Advance.
    Regards,
    Rosa

    Rosa, you can only extend table BUP000 and not the actual address table. Sorry for that for more details on how to extend the BP itself refer to my WeBLOG I wrote on this. Have fun and let me know whether you need more help, Tiest.
    Also do not forget to award points to useful responses.
    <a href="/people/tiest.vangool/blog/2005/07/24/pc-ui-and-easy-enhancement-workbench-eew-integration and Easy Enhancement Workbench (EEW) Integration</a>

  • Enhancement of Business Partner (Relationships) using BDT -Bus Data Toolset

    Dear Experts,
    I have a requirement from my customer enhancing the Business Partner Relationships using BDT.
    I should add 2 fields namely salary, employer start date in the Business partner Relationships, it must be added in the characteristics of relationships as one employee can have multiple employers and vice versa.
    If I would like to add the fields in Business Relationships using BDT, are the steps same as adding fields in business partner? or do we need to perform any other steps? Did someone already did this type of modification, please provide your suggestions.
    After adding the fields is it possible to cusomize the fields for history of the changes? e.g. if salary field has been newly added and after creating a BP after some days I want to change the salary and for the changed salary I want to have a history.
    I would appreciate if you can help me with your suggestions.
    Many thanks and best regards,
    Afroz

    Solved the problem Using EEWB.

  • Adding Custom fields in ECC Business partner BP - (BUT000) using BDT or EEW

    Hello BDT / EWWB Gurus,
    We have a requirement to add custom fields to ECC Business partner, which interns create custom fields in But000 table.
    I would be great if anyone could let us know how to add Custom fields using BDT or EEWB.
    Please also elaborate the step by step process.
    thanks.
    Regards,
    Preethi.

    Hi Clemens,
    Thanks for the reply.
    I had read the document and it has given lot of information.
    Actuall my requirement is to add custom fields in But000 table and the data will be controlled through BRFPlus application in TRM. Lot of forum thread suggesting to use EEWB to enhance the Business partner but000 table.
    I would be great if you could let us know which methodalogy should I use to enhance the But000 table and what are all the impacts and also please let us know the process steps to enhance the but000.
    Thanks.
    Regards,
    Preethi.

  • BDT : Uplaod data in Customized fields

    Hi Experts,
               I have added some customized fields with the help of Business Data Toolset(BDT).
    Now the problem is I have to upload mass data and I am not clear How the data would be passed in the customized fields.
    Is there any BAPI or standard functionality to acheive this???
    Please sugest a way .
    Help would be appreciated.
    Regards
    Sourabh Verma

    HI Sudheer,
                  I know that if we add the fields through EEWB they are reflected in this BAPI , But will the fields would be reflected in this BAPI if they are added through BDT??
    Or is there some other way to uplaod the data when BDT is used?
    Help will be appreciated.
    Regards
    Sourabh Verma

  • BDT-DC is not prepared for this application object

    Hi,
    I am getting this the error message:
    BDT-DC is not prepared for this application object
    when I try to create an extension.
    I cam across the following thread:
    EEWB
    In this thread it is given:
    Hi,
    The xdcflag in the table TBZ1 needs to be set.
    Please follow the steps mentioned below.
    1. Start the transaction SM30.
    2. Enter the name of the Table/View as V_TBZ1_DC.
    3. Press the 'Maintain' button.
    4. Double click on the Application Object you are trying to extend(for
    e.g., BUPA)
    5. Mark the checkbox 'Active in DC' under the section 'BDT DC Settings'.
    6. Save the data.
    You can refer to note 955236.
    When i follow the above steps it says that:
    Do not make any changes (SAP entry).
    Please Guide.
    Regards
    Shilpi

    Hi Smita,
    I am unable to start the wizard.When i choose Start Wizard I get this error message and the wizard is not started.
    Regards
    Shilpi

  • EEWB and EBT

    I am working on a task to add custom fields to a standard SAP BP tab. I was going to use EEWB to update BUT000 and create the custom tab in BP, then use BDT to move the fields over to the SAP standard tab. I have never done this before, so here are my questions.
    1. After I use EEWB to add the fields to the table/screen, will I need to add code to the BADI? Or, can I take care of the rest with BDT?
    2. Is a combination of BDT and EEWB the best way to accomplish my goal?
    3. If so, please clarify what part of this development do I use EEWV for, and what part do I use BDT for?
    Thanks for your help. It is greatly appreciated!
    Regards,
    Jason

    Hi Jason,
    BDT is a framework and EEWB is a tool. The thingsw hich you can manually do with BDT can be automatically generated using EEWB. So, ultimately the changes done using either is same.
    You can generated the custom field and related coding using EEWB and then use BUPT transaction to move your field to standard tab.
    Smita.

  • EEWB for EKUN table

    Hi Friends !
    I am using EEWB for BP Enhancement (addition  of screen). During the creation of Extension forthe same if I select EEWB OBJECT as BUPA then the BUT000 table gets upgraded. However i require that EKUN table gets upgraded so what should be the EEWB OBJECT name.It would be of great help if anyone could help me out with it .
    Thanks !

    Hi,Vikrant Singh
      I think there is no eewb object for your requirement after I checked the IS-U system. if you want to enhance it ,pls use the BDT  .  the TX is BUPT .

  • BP Enhancement using EEWB

    Hi All,
    I need to enhance the BP with some additional fields which are required in Mobile Sales Scenario.
    Using EEWB, when I enhance the BP, even though I tick the checkbox for fields to be available in Mobile scenario, they are not getting updated in the Tables related to Mobile Sales ( Table SMOKNA1 and SMOMITABT ).
    Please suggest what needs to be done for achieving this?
    Regards
    Murtaza

    Hi,Vikrant Singh
      I think there is no eewb object for your requirement after I checked the IS-U system. if you want to enhance it ,pls use the BDT  .  the TX is BUPT .

  • Modifying the custom tables TBZ* generated by EEWB for BUPA?? Advisable?

    Hi,
    We have added new fields in BUPA using EEWB. The new fields are automatically added in the new section created on screen. Now our requirement is to move these fields to one of the existing sections and delete the new section. Is it advisable?
    I assume that in the EEWB extension wizard, we do not have any option of generating the new fields in existing custom sections. Please correct me if I am wrong.
    As per our current plan, To accomplish this change we are planning to modify the tables TBZ3H, TBZ3I, TBZ3C and TBZ3D for the view--> section --> screen mapping. Will that be enough or some more changes will be required?
    Also, a new BDT application is created for the new section and there are corresponding entries in TBZ0A, TBZ0B, TBZ0C and TBZ1F. Now we are not sure that if we modify/delete these entries, how the system would behave. Any pointers are welcome!!
    Specially for TBZ1F entries, should the new events function modules created for the new application be assigned to the already existing application.
    Please advise.

    http://scn.sap.com/people/rakesh.chugh/blog/2009/12/28/deletion-of-eewb-extensionproject-in-sap-crm-for-bupa
    Just in case you are looking for this info

  • TRANSACTION EEWB

    Hi Gurus,
    I was using the transaction EEWB, but when i tried to start wizard the following error message occourred:
    BDT-DC is Not Prepared for This Application Object.
    Anybody have never seen this message? Do you now what that mean?
    Thanks,
    Barbara.

    Hi Barbara,
    The below links should help you.
    EEWB with Object Type BUPA and enhancement type ADD_NEW_FIELDS
    Re: BDT-DC is not prepared for this application object
    Regards
    Nidhi

  • Cannot apply note 955236 (to start EEWB on BUPA)

    Hello everybody,
    I want to estend the BUPA object via EEWB.
    I am trying to apply note 955236 to my CRM 5.0 system because, when I try to extend that object, I have the "BDT-DC is not ready for this object" error.
    As the note says, I go to transaction SM30, maintain table V_TBZ1_DC and try to set the "Active in DC" flag of BUPA.
    BUT I receive the "Do not change (SAP object)" error and cannot set the flag.
    Anybody knows why is that? What authorization do I need?
    Thank you very much
    Riccardo

    Hi Riccardo,
    "Do not change (SAP object)" is a warning or error. I think it should be just a warning message. And you should go ahead and make changes if it's just a warning message.
    I've set the flag correctly in my sytem and it works absolutely fine.
    Write back if you get an error.
    Thanks,
    Gyan.

Maybe you are looking for