BED is not capturing in the J1IIN

Dear Experts,
I have created commercial invoice ,in which i have entered only BED (Condition type JMAN) manually (Rest of the duties like Cess and Ecess will appear automatically)then i created excise invoice with the help of J1IIN, while creating excise invoice manually entered BED is not capturing and not generating accounting entry also for BED but the other duties (Cess Ecess) is capturing properly in the excise invoice and entries also generating.
i have check the other commercial document also, wherever we entered BED manually the same problem we are facing and if BED is coming automatically, where we are not facing the problem.
So please help me to resolve the issue urgently
Shibu

Sir,
,i have gone through the path as you suggested, where JMAN is not maintained. the thing is that we are not able to maintain JMAN in Tax Defualt information because we are entering occasionally (JMAN ) manual excise duty. mostly the excise duty is coming from preceding document. if i change the JEXP and maintain JMAN in Tax Defualt Information, i hope i will face problem if BED is coming from preceding document automatically, in that case i have to change again the JEXP instead of JMAN.
Please give me help for resolving the isse
Shibu Chandran

Similar Messages

BED value is not captured in the outgoing excise invoice

Dear Friends,
I have created a sales order consisting of BED,ECESS, SECEE duties in the sales order , delivered and created invoice and then raised excise invoice with the referance to invoice. Here BED is not captured in the excise invoice.
I will let you all know what is my analysis regarding this issue.
1. I have checked the " maintain excise defaults" settings. i have checked the BED condition type(JEXP) is available under A/R BED cond or not. Then in trial error methode inputed diff places and checked.
2.condition records are maintained properly.
Please let me know as soon as possible, if any other configuration part/settings to be maintained because my client is go living on next week.
Regards
Mohan

Hiii
Check the followings..
1. Wheather you have maintain the condition type JEXT as 100% with condition record or not.
2. Check you have maintain the condition type JEXT under, Logistic General -> Tax on Goods movement----> India -
> Basic Setting -
> Determination of Excise Duty -
> Condition based Excise Determination -
> Classify Condition type
check here condition type JEXT is maintain with your pricing procedure or not.
Hope it will solve your problem.
Regards
Shambhu Sarkar

Oracle stored procedure call failed,but not captured by the error handling

Hi All,
I have a unix shelll script which calls a stored proc in Oracle, the stored proc call failed due to "ORA-01033: ORACLE initialization or shutdown in progress".
But it is not captured in the error handling block, Any ideas why this had happened?
SQL file had : my_test_sql.sql
exec my_proc(..............);
Unix shell script has this call:
sqlplus -s my_user/my_pwd@db1 @my_test_sql.sql
if [[ $? -ne 0 ]]; then
echo "failed"
exit 1
else
echo "success"
fi
If i execute the above shell, I'm getting the following
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
SP2-0306: Invalid option.
Usage: CONNÝECT¨ Ýlogon¨ ÝAS SYSDBA¨
where <logon> ::= <username>Ý/<password>¨Ý@<connect_identifier>¨ | /
success.
This puzzled me, any pointers?

The $? status variable shows the return code of the last command executed. It will be difficult to determine what the exit status of your sql script is without knowing the script. Do you have any "WHENEVER SQLERROR EXIT" statements in the script?
The ORA-01033 error happens when the database is not open, perhaps in recovery, or startup or shutdown is halted due to a failed or full disk, error in archiving or writing to redo, etc.

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

Rather than convert, you'd be better off capturing with a more current version of the program -- one that supports AVCHD video. Otherwise, you're in for a lot of headache. A converter isn't going to solve your problems.
BTW, when you say Premiere 6, do you mean Premiere 6 -- which is over 10 years old? (There was no Premiere Elements 6.)
Trust me on this: Capture with a Mac version of Premiere Elements 11 or 12 and your video will be perfectly compatible with any Mac program.

Excise not captured in the MIGO & Tax calculation is not correct in the PO.

Excise Settings completed.                    02.11.2007
a)     Configuration done as per J05 Building block.( Tax Procedure TAXINN)
b)     Maintained J1ID, all steps.
c)     Maintained tax code in FTXP.
d)     FV11  Maintained for Material, vendor, Plant in combination with Tax code input tax maintained in FTXP.
e)     Checked CIN Health, all tick are green.
f)     Given all G/L accounts for Excise Transaction Type (ETT)
g)     Maintained all number Ranges.
Issue  1)
Tax calculation is not correct in the PO, tax tab
a)     JMIP is appearing 12% in condition amount, (as per condition record) but condition value is Zero, (Not calculated by the FI Pricing procedure). Screen shot for Pricing procedure, PO taxes and condition record given below.
b)     JIPC Sales tax 4% in condition amount (as per condition record) , calculated by the FI Pricing procedure is 8%, condition value is Rs 8 instead of Rs 4
Fi pricing procedure.
PO Taxes  wrong Tax calculated
FV11 Condition record
Issue  2)
While creating Goods receipt aginst PO (Tax code V2 in PO). Movement type 101, Excise tab appears at Header and Item level and we need to put the Vendors Excise Invoice and date, nothing is copied from the PO for Excise duty & sales tax.
Now we put the values for ED and Sales tax manually in the MIGO and saved the document. While display material document, excise tab is not there i.e. no excise related activiy is captured here in goods receipt.
If you need more detail, please revert on cell 093295 53235.
Please suggest.
Manish Gupta
93295 53235
[email protected]

Hai,
1.Check the condition types JMIP & JMIC in IMG - Financial accting New - FI AC Global settings - Taxes on sales and purchases - Check calculation procedure - Define condition type.
2.The condition types you have used are defined for non deductible taxes i.e., it gets inventorised, added to the material account.And also the accural key assigned to this condition types are NVV - defined for non ded input taxes.
3.Instead the condition types defined by SAP Standard system for BED & ST are JMOP & JIPS and the accurals assigned to this are VS1 & VS5.
If you want clear details mail the screen shots to my id [email protected]

BED(14%) not appearing at the time of creation of Export Sales Excise Inv

Dear All,
While creation of excise invoice for export sales the BED(14%) is not appearing in the excise invoice however Sec Cess (2%)and Higher Sec cess (1%) are appearing.
If I create an excise invoice for normal sales then all the 3 Values are coming please suggest what needs to be done with regards to my excise invoice for export sales.
Best Regards
Atul Keshav.

Dear Atul,
Go to tax on good movement, - basic setting - default excise conditions for you procedure ie taxinn or taxinj - maintain your jexp or jex2. same way check your excise group - series group setting and also your delivery and billing condition types for export in taxon goods movement.
regards,
Sudhir
Edited by: Sudhir Nair(India) on Nov 21, 2008 12:08 PM

Tax Amount is not capturing at the time of GRN

Dear friends
i have created a PO with VAT+Sur cahrge tax code
The system is calculating the total taxable privea nd value in PO
While doing GR,System is not capuring at the time of GRN it is only capturing the price without taxes
Can any body help on this?

Dear Sanjay
thnks for your replay
But how can I add these values(vat-5% and Surcharge-10% on vat ) in to inventory acount
The accounting document generated at the time of GRN should have the material price +Total Tax amount
Expecting your reply
Thnks again

Balance sheet G/L account posting is not captured in the SLR budget report

My case:
While posting a schedule agreement ( which is account assigned to "project make to order"), to G/L account, the following warning message comes.
" G/L account is a balance sheet account".
Although I am able to post the scheduled agrrement to that G/L account, but my slr budget report does not capture this commitmnet cost (commitment management is active for present financial year).
Further for the cost to be captured in the budget report the G/L account should exist as cost element ( as from my observation).
I observed that , that particualr G/L account ( which is a balance sheet account) is not present as a cost element .
My CO colleagues says that it is not advisible to create cost element for a balance sheet G/L account as it may lead to mismatch in the cost flow.
Now , how can the cost be captured in the budget report for this G/L posting.
Please suggest some feasible and correct solution.

Hi Vishal......
As I think ...here we have to take P & L account ...becouse cost can be booked only in P & L with revenue...for that we can see commitment too..balancesheet account are direct account ....like Bank account ..........
please rewards the points if useful
Regards
Rama Shanker Sharma

Section Code details not captured at the time of vendor clearing

Hi Experts !
I am facing problem in clearing of vendors accounts through F-44 or F-54 . The problem is creating with those vendors accounts which having withholding tax.
Error massage is (Fill Section Code)
At the posting of down payment and invoicing documents section code is filled by user. But when we go for clearing those documents one clearing document is created, in this document Section Code details not captured and field is in inactive mode.
Please suggest me for same ASAP.
Regards
Amit Gupta

Hi Amit,
Probably you are using a validation for making Section code mandatory. Check it in OB28. If it is yes, then check whether you are using Set directory for including/excluding a list of transaction code for making section code mandatory. if it is yes, th exclude that T-code from validation as section code is not required to be filled in clearing transactions.
Section code is required for Witholding tax and section code is made a required field whereevr, TDS liability is generated. And in clearing no liability is generated so section code is not required. It is not done through Field status group. It is doe either by Validation or by Screen transaction variant. SHD0.
Regards,
SAPFICO

Deltas are not capturing for the enchanced field

Hi Friends,
We have enchanced 2LIS_11_VAITM datasource with custom field called customer requested date.
For initial setup i can see the data for this field in BI. But when user changes the customer requested date then this is capturing in deltas.
can any one know the reason behind this.
But when i run set tables for the particula Sales document number i can see the data for this field.
<removed by moderator>.
Best Regards,
Reddy.
Edited by: Siegfried Szameitat on Dec 23, 2008 4:38 PM

Hi,
when u replicated those fields are appering in bw side? if not by default the enhanced fields in hide condition for that fields data will not come ,if it is the case go to the RSA6 and select ur datasource and go to the change mode and deselect the hide check box in extraction structure of datasource and do the activation and do the replication in bw side
if the fields are came in bw side then u check in transferstructure either the fields assigned to correct infoobjects or not then check the update rules either those fields assignd or not.
Thanks & regards
k.sathish

Target Cost not captured in the production order.

Dear All,
I have created cost estimate for the FG material and moved the standard cost to FG material and created the production order.
In the production order ,I could see the Actaul cost & Plan cost,but the Target cost is ZERO.I have checked the entire and PP & CO settings ,it is OK.
Please let me know that what could be the reason for not capturing the Target Cost.
Regards
Subbu

Hi Subbu
1. Have you released the cost estimate from CK24 before GR from prod order? Check if field Current price in Costing 2 view is not Zero
2. If your contr area currency is different than comp code currency, then your costing variant should allow you to release the cost in contr area currency as well.. T code OKKN ("assignments" tab)
3. Check if target cost version 0 is defined properly and assigned to your contr area
4. check if variance key is there in your prod order.. you can assign default var key to plant in OKVW
5. Execute Variance calculation KKS1/2/6
Regards
Ajay M

Approval status not captured in the workflow...

Hi,
In my 4 tier approval workflow, I have a user decision loop , before which a user decision step is there for approve or reject.
There are two paths under user decision, one says when reject or approve and another says till last layer which then leads to container operation to collect the next level of agent.
Under when reject or approve step, there is a condition step that checks if user has approved or rejected.
Now I need to store in a custom table status R if rejected , status A if approved.
So I have added 2 steps under each path (approve and reject), but it so happens that when the first tier agent rejects it, the status gets recorded in the custom table but when he approves it , A status is not updated.
If the first agent approves and second one (final) approves only then A is updated.
I want the status to be recorded like this
agent1     Submitted for approval
This should change to agent 1    approved and then another entry should be added in the custom table with submitted for approval for agent 2.
My code is in a custom class and it looks fine as it wors for submitted for approval as well for reject. But not for Approved. Container objects in both reject and approve are same except that I pass A or R.
What can be wrong ??
thnks

HI
First let me give a breif explanation about how and where the result of the decision step is captured.
While creating a decision step in the workflow you would be giving some texts for each outcome, let say in your case you said that For both approve and reject you are using one branch (Assume that id of this branch is 0001) now the other branch is for reading the next level agent (0002) so now when you click on the first button then the Decision workitem standard container element WIRESULT will be populated with 0001 and let say if you clcik on the second button to read the next level approver then WIRESULT will be populated with 0002..
    Here your design is conflicting ( Assuming that what I said above is what you have implemented) Instead what you can try to do is Just have two outcome in the decision step as 1. Approve(0001) 2. Reject (0002) , now two braches will be coming out of decision step , now getting the next level agent keep it in a different background task, by creating a separate BOR method. Insert this task in both the branches.....
The remaining activities what ever you are perfoming to update the table you do it normally... as you did
Regards
Pavan
Edited by: Pavan Bhamidipati on Dec 7, 2010 11:05 AM

Part -1 Not Capturing at the time of GR

Hi Friends,
I am biffurcation 100 kg of qty in to two batches at the time of GR system is updating part-1 only for one batch whereas there is no part 1 entry for second batch.
Need your help why this is happening
Regards
Vivek

Dear,
Two way,
1) Cancel Good receipt document with MIGO t-code and create new document for material receipt and capture part 1.
2) Go J1IEX - capture excise invoice against your material document.
Than post it with J1IEX.
Regards,
Mahesh Wagh

Variable not Capturing in i_t_var_range

Hi Frds,
I have created new customer exit variable for 0FISCPER for calculating fiscal period. But the created new variable is not capturing in the Customer exit - EXIT_SAPLRRS0_001 in import - I_T_VAR_RANGE. Can anyone tell how to solve the problem.
Thanks
Pari

Hi,
First thing is to how you have defined your variable such as
Customer exit or
Replacement path or
Manual input etc..
If you want your variable filled through the exit select Customer Exit, then you have to look at the variable options such as Single value or range. According to your definition you have code as you defined such as wa_range-opt = 'BT' or 'EQ'.
Next..
In CMOD -> your project -> EXIT_SAPLRRS0_001 -> include 'ZXRSRU01' ->
ISTEP = 1 -> before the variable pop up will be filled by the exit
when 'your variable'
your code
ISTEP = 2 -> after the variable pop up i.e after running your selections, calculates the values for your variables after selection screen execution.
when 'your varaible'
your code
ISTEP = 3 -> Validation purpose and message handling purpose
when 'your variable'
your code

How to check that Delta is not captured?

Dear Experts,
I am using 2LIS_02_ITM datasource.
PO is created using a program.
The next step in the program, it can change a field in the PO depending on logic, using a abap command 'update'.
Sometimes, this change is not captured in the delta queue, it seems.
why i say this is the PO shows the field value but BI delta load does not.
It is using Queued Delta now.
Initially, the program uses a command 'update' to update the field in PO.
Now, we decided to use ME22N program to ensure delta will be created.
The problem is happening to some records and not all delta records.
Its very difficult to tell what is the cause.
What is the standard method to check that Application table data is not captured in Delta Queue by the extractor?
Or
If PO can show the field value, is there a possibility that Delta may not capture this field change?
regards
Pascal

Well just throwing few possibilities:
1 - Basically PO creation, change in values/quantities etc are Business transactions and they generate evens known as BTEs.
Now we have to explicitly inform SAP ECC that which applications can use BTEs and we do this by tcode BF11.
Check if the software component creating and changing POs is properly linked to BTEs and if BW is set as active in BF11 tcode.
2 - If point 1 is checked and nothing is found to be incorrect, please check if Industry sector is correctly chosen (SBIW). Industry sector generates a set of Transaction keys (BWVORG) without which the values are not updated in BW.
Also rightly pointed by Tbollo, you need to ensure that there's a pattern in the missing docs to identify the rootcause.
Debanshu

BED is not capturing in the J1IIN

Similar Messages

Maybe you are looking for