BED value not appearing in J1IIN

Hi Experts,
Currently I am into an implementation project and I am configuring CIN.My tax procedure is TAXINN. But after doing all the configuration, while doing J1IIN, BED value in invoice is not appearing in BED field (J1IIN Screen). However Edu Cess and Hr Edu Cess value is flowing properly in their respective field. I am using std condition for BED (JEXP) and I have already maintained this condition in Logistic General-Tax on Goods mov-IndiaBasic settingdetermination of excise duty--- maintain excise default.
configuration are given below
excise registration--- copy from std (1)
company code -- copy from std (IN01)
plant setting -- (single goods receipt)
maintain series grp
maintain excise grp
Tax calculation procedure -- TAXINN (country IN)
Maintain excise default ---
Tax Proc CVD            Tax Jurid                                             A/R BEDCond                              BED Perc
TAXINN     JCV1            9900     JMO1     JSO1   JAO1         JEXP                       JCES        JEXP     JAED     JSED
                                            ECS A/R    ECS perc   ECS Cond               A/R AT1 Cond      AT1 Perc
JCED                                         JECT     JECT     JECT                       JA1X                     JA1X
Classify Cond Type----
Procedure                  Condition Type                    Condition Name
TAXINN                       JEXP                                A/R BED Percentage
TAXINN                       JECT                                A/R ECS Percentage
TAXINN                       JA1X                               A/R AT1 Total
Please tell me if I am missing anything.
Thanks & Regards,
BKR

Hi,
In this case if your BED condition type is in 'Percentage' then please check your settings for 'Maintain Excise Defaults'.
Here maintain your percentage BED condition type 'JEXP' in 'BED Per' column and maintain ' JEXT' which is a condition type for 'BED total' in the 'A/R BED cond' column.
If you maintain these settings your values for BED will flow in J1IIN, But provided you have mainatined 'JEXT' condition type in your pricing procedure.
Thanks & Regards,
Rahul H.Dhole
SAP SD Consultant

Similar Messages

ECS value not appearing in J1IIN after upgrade to ECC 6.0 from 4.72

Hi Experts
All the objects corresponding to ECS are restored to original i.e. ECC 6.0 during SPAU modifications. We are able to find the ECS value appearing in the new version for the existing billing docs whereas when we try to create a new billing doc in J1IIN, ECS value is calculated as '0.00'. We have checked with the sale order and billing doc where ECS is populated as expected.
Kindly provide us with some inputs to resolve.
Regds
Priya G

1) Maintain the view J_1IEXCDEF for switching on NCCD indicator for the ex reg.
2) Activate ECS for the same reg in view J_1IREGSET.
Regds
kartik

SCCM 2012 R2 - Software metering Reports Parameters Value not appear to choice

Hello Every Body
I hope to get answer as soon as possible
I have SCCM 2012 R2 & SQL Server 2012 SP1, my problem is ( all software metering Reports Parameters Values Not appear so I cannot select
Note:-
( All parameters Available Value set to Get Values From a Query)

Has it been over 45 days since you created the active SWM rules? Do all (most) other SWM reports
work?
all other reporting in SWM which doesn't ask for month and year working
only the problem in year & Month Parameters Values
note:-
these reports doesn't need a 45 days to work, alwasy when i install SCCM reports working only from the second day of installation

L.C value not appearing in MB51 report

Dear gurus,
The l.c value not appearing in MB51 t.code,are there any other reports to see this values if so,plz explain in detail

Dear Jay,
It will be available in MB51, may be check your variant for hidden fields or your authorization, You will get in MR51 also
In Standard SAP System Asset GR will not have any Finance document at the time of Goods Receipt, So you are not getting Amount in LC, If you want to trigger finance document at the time of GR, you have to change the account assignment category A properties like i.e., remove the tick of GR Non valuated in the below path
SPRO-->Materials Management-->Purchasing-->Account Assignment-->Maintain Account Assignment Categories, Select A
Goods receipt made after this change will be triggered the finance document.
R,
amala

BED & Higher education cess are not appearing in J1IIN in export sales

Dear Experts,
we have scenario,
- 1000 & 2000 Plants are excisable
- Excise group is same for 1000 & 2000 plant
- Serial Group is different for 1000 & 2000 plant.
we enter materials from 1000 & 2000 plant for creating a export sales order ( IN one export sales order we enter material from different plant), in which excise duties are showing correctly even though we enter different plant in sales order. even commercial invoice also properly generated with proper excise duties but when we try to create excise Invoice (J1IIN), BED ,Education cess and Higher education cess are correctly appearing for the materials of plant 1000, but only BED and Higher education cess are appearing for the material of plant 2000, +not appearing the Education cess in the excise invoice moreover that excise accounting entry too+
But when try to create same scenario in domestic sales , all the documents ( Right from sales order to Excise invoice are working properly ,all the BED,Cess,Hcess are also properly appearing and accounting entry too.
please help me to resolve the urgent issue.
Shibu Chandran

Hi,
As i said above you can not see those accounting entries for excise invoice in export.
you can see the accounting entries for excise invoice in domestic sales process.but not in export process
to see this difference you can just go to v/08 and select your pricing procedure for export sales,here you can see the tick mark for statistical field for all excise conditions.but you can not see this tick marks in domestic pricing procedure.
and also as i said above you check those settings in J1ID T-code
for this in J1ID select cess rates-click on change icon-here check whether you maintained plant-material-check AT1 field along with other fields like BED%,CESS%
and also check EXCISE TAX RATES in that J1ID there you should have excise rates for chapter id combination
and finally check material and chapter id combination
Try this and let me know

BED(14%) not appearing at the time of creation of Export Sales Excise Inv

Dear All,
While creation of excise invoice for export sales the BED(14%) is not appearing in the excise invoice however Sec Cess (2%)and Higher Sec cess (1%) are appearing.
If I create an excise invoice for normal sales then all the 3 Values are coming please suggest what needs to be done with regards to my excise invoice for export sales.
Best Regards
Atul Keshav.

Dear Atul,
Go to tax on good movement, - basic setting - default excise conditions for you procedure ie taxinn or taxinj - maintain your jexp or jex2. same way check your excise group - series group setting and also your delivery and billing condition types for export in taxon goods movement.
regards,
Sudhir
Edited by: Sudhir Nair(India) on Nov 21, 2008 12:08 PM

Excise duties values not appearing in the RG1 register

Dear All
After updation of RG1 register and extraction of the same on checking the entries in the table J_1IRG1 we are not getting the BED ,Ecess and SECS.In printing of this register the same values are not appearing.
Further this register is around 524 pages.It is showing per transection.How can we redure no of pages.
Please guide in this matter.
deepti

hi,
once again check
1.Tcode: J1id
2.Tcode:J1iex
here see part1 created or not check it.
3. Tcode:J1i5 update register
4. Check condi.types for SH
is not fine pls revert back
regards
ka

BED, AED not appearing @ MIGO for Import

Hi,
Import Pricing procedure is working fine at our production client. When we try the same at our testing client I'm facing this problem. AED & BED values are not appearing at excise item tab by default (at the time of MIGO), in fact it'll remain blank and we need to feed in values manually, whereas Ecess & SHEcess appears automatically fetching the values from Invoice verification.
Experts please advise, thanks in advance.
Warm Regards,
Rajoo

Hi Uttkarsh,
1. Tax code is V0
2. Yes
3. The values of BOE
4. Yes
The same procedure at production client is working well so there should be a setting in customizing which is available at Production & not at Testing?
Thanks,
Rajoo

ECS Total Tab not Appearing in J1IIN

Dear ALL
the ECS total columns are grayed out. but the ECS value against the item is visbile on top.
it is apperaring in the invoice value, also in J1iin it it appearing on item value but missing in the total column below.Any idea on this
Regards
Sainath

Sainath,
This topic has been discussed just check this link
[Re: ECS not showing in J1IIN]
Regards
Sathya

Excise Values Not Flowing in J1IIN-(export Excise Invoice)

Hai ALL,
I have gone through the previous threads,
with those replies, my purpose hasnt solved.
req: -
" I am creating Export Excise invoice - J1IIN ( wrt : Export Invoice-VF01), Maintained "Subtransaction type- EX Exports"-
did the rel config: specify G/L accounts for ETT.
- Excise values flowing from VF01- J1IIN for domestic sales, but the same is not flowing into Export Excise Invoice-" -
my doubt is: Do the Excise Values flow to Export Excise Invoice from Comm.Invoice. ( As in Exp.Exc.Invoice, system will not generate any accounting entries).

IN export sales,
I have maintained ED cond types as "Statistical" so that the values should not considered in Net value calculation. - which is working fine & Accounting documents for ED wont generate.
I have created Exp.Exc Invoice-J1IIN (with ref to- Comm.Invoice & Sub transaction type - EX_exports)- ED values in Comm Inv- flowing to Exp Exc Invoice. - In utilization tab- when change "Exc.Invoice type" - LoU, values become Zero- ( as MBS said, will take help of ABAPer to write the code "Suppress_calculation - "X"- )
But, can you confirm, that when we save Exp Exc Invoice- will accounting doc's generated or not-
( I expect, A/c'g docs will not generate- am i rite?)
after this, I have updated RG1-J1i5 (with Classification - IWE, RMA is done when GR from Production), Extract/print-RG1 - J2I5/J2I6.
Now create ARE-1 - J1IA101 ( wrt : Exp Exc Invoice) - mark the "Print ARE document"- Entered the "Bond" details in "BOND UT-1" tab. & save.
next, Post ARE-1 , Update ARE-1 & finally Close ARE-1.
"When we close ARE-1"?
is my understading above is rite??
pls suggest
Edited by: SAP Consultant- on Jan 28, 2009 4:31 PM

Container values not appearing in alerts - SAP CRM 7.0

Hi Experts,
I have 2 issues:
1. I am calling an alert on lead creation by calling an action with processing type as TRIGGER ALERT.
The alert appears on the home page but the container values defined in the long text are not appearing. The containers defined are as follows:
OBJECT_ID - Object type - BUS2000108 - business transacton number
Call later date - Z field in CRMD_ORDERADM_H - structure - CRMD_ORDERADM_H - Field Zabcd
Please let me know if there is something i'm missing or if i need to define these values in the Method TRIGGER ALERT???
2. If i want to call this action on a particular date (call later date as above), is it possible to take the reference of this date in the start condition?
Regards
Nitin Sehgal

Dear Nitin,
The first I am not sure, so hopefully someone else can help you with that.
For the second, If you want a Z-field to be used in the action conditions, you should add an attribute to your BOR-object in SWO1.
How to do this can be found here.
[http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html|http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html]
Hope it helps...
Regards,
Pieter Rijlaarsdam

Plan next yrs values not appearing in Report Painter

Hi,
In our one of Z report (developed thrugh SAP std Report Painter functionality), Plan next yrs column does not shows any value in output of report.
Basically this column should show next years plan values for WBS Element cost elementwise.
When I double click on any of the cell of this column, I am getting output with 0 records but selection criteria is appearing as Period 7 and Fiscal year as 2999 on output screen on the top. So I am thinking that output is not appearing because of wrong selection criteria field values/characteristics values.
Just wanted to know from you all guys, what things should I check in Report Painter to resolve this issue? Also what are the causes of this issue?
Could you please tell me the remedial procedure and transaction code to resolve this kind of issue?
Edited by: SWAPNIL PRAMOD KHARUL on Jan 30, 2011 12:17 PM
Edited by: SWAPNIL PRAMOD KHARUL on Jan 31, 2011 9:29 AM

Hi,
Thanks for reply.
Characteristics are:
Value Type: ZCJUL01
Value Type:10
Version:6-VERP
Period: 7
Valuation:0
Object ind.:1 to 5
Object ind.:P
Fiscal Year: Z-GJHNJ Next Year to 2999
I think it looks like wrong Period selection characteristics value.
Please suggest/guide what has to be done?
Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:19 AM
Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:21 AM

Value not appearing in the workbook

Hi Friends,
There are some values in the workbook which are prob appear through cell references. In dev sys its fine. We have moved the workbook to Quality, but here the values are not appearing. The value is period value which is not comming from either query columns or rows. I am unable to track down from where this value is appearing in the workbook. This period value appears where this (Layout ->display text elements ->General) appears ofcourse in Dev not Quality. There are many tabs(Queries) in the workbook.
How to know/check from where this value is getting populated.
Thanks & Regards,
Shreesh.

After adding 'trip type expenses in the layout' in the layout, save the layout as a variant and give it a name.
Next time when you run the report, put that variant and then run
Values will come

Rich text default values not appearing in content entry template

Hello all,
Sorry for the repost, but no one seems to have an answer for me in the other forum and I thought I might be able to reach more people here.
I have created a base text item and would like to include default values in some of the attributes. The problem is the default value I set in the rich text field is not appearing when I try to create an instance of my item type.
Is this a bug, or am I not doing something right? All of my other attributes show their default values.
Thanks in advance,
Jim

bug 3221058
Patch 4021971 for 9.0.4.1
(only available on http://metalink.oracle.com site)
Patrick.

Result recorded values not appearing in printing the Inspection lot

Hi all ,
Using QC21 i am printing the Inspection lot but the Result recorded values are not appearing in printing the Inspection lot .
while creating the certifacte profile i had maintained the MIC for which i had saved as Summary for recording . if i change this to Orginal value it says that this doesnt exist in the Inspection plan .
can somebody help me on this .
thanks ,
ksr

Hi
1.Make sure that you are using same MIC in Task list & certificate.
2.make sure that you have done RR & taken UD.
3.make sure that MIC is reference MIC.
4.Make sure that profile is attached to material
Regards
Sujit

BED value not appearing in J1IIN

Similar Messages

Maybe you are looking for