Been using an ipad 2 without passcode for quite some time. While upgrading to ios 7, I enabled Find Iphone on the Ipad. It asked for passcode and I gave one. Now I forgot it.
Been using an ipad 2 without passcode for quite some time. While upgrading to ios 7, I enabled Find Iphone on the Ipad. It asked for passcode and I gave one. Now I forgot it. Connected it iTunes (on my windows 8 system) with which I sync and that too required an update as old version of itunes cannot read ios7. Problem is itunes does not want to get updated. Some vague error on not having right to write a file in ProgramData folder wheras as an admin i have full rights. Next I downloaded the install file from itunes site - no luck it would not install. Then I tried to remove itunes - it does not want to go. Am at wits end... Is the option only to restore it as a new Ipad?
Place the iPhone into recovery mode and restore the iPhone with iTunes on your computer.
http://support.apple.com/kb/HT1808
Similar Messages
-
My macbook pro has been running slow for quite some time
Hello, my MacBook Pro has been running slow for quite some time now and it's frustrating. I hope you'll be able to help me. I've read this thread and figured out I should open a new one, so here it is.
I've already downloaded Etrechech and ran it and this is what I got:
EtreCheck version: 2.0.6 (91)
Report generated 22 Oct 2014 08:21:16 GMT+2
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.4 (13E28) - Uptime: 1:19:18
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (312.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[invalid?] com.genieo.engine.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.barebones.authd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
Dropbox Application (/Applications/Dropbox.app)
HPEventHandler UNKNOWN (missing value)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.4.2.18903 Support
Unity Web Player: Version: UnityPlayer version 4.0.1f1 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.3 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Silverlight: Version: 4.1.10329.0 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.3 Support
GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 Support
ViewRightWebPlayer: Version: 3.3.0.0 Support
proXSignXML: Version: 1.2.21 - SDK 10.5 Support
JavaAppletPlugin: Version: Java 7 Update 55 Check version
User Internet Plug-ins: ℹ️
OctoshapeWeb: Version: 1.0 - SDK 10.8 Support
Picasa: Version: 1.0 Support
Google Earth Web Plug-in: Version: 7.1 Support
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Spelling Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 187.22 GB
Destinations:
VERBATIM HD [Local]
Total size: 999.86 GB
Total number of backups: 0
Oldest backup: 2012-10-07 19:12:45 +0000
Last backup: 2012-10-07 19:12:45 +0000
Size of backup disk: Adequate
Backup size 999.86 GB > (Disk used 187.22 GB X 3)
Top Processes by CPU: ℹ️
14% Safari
12% WindowServer
4% coreaudiod
3% com.apple.WebKit.Networking
2% hidd
Top Processes by Memory: ℹ️
220 MB Safari
43 MB WindowServer
26 MB mds
26 MB com.apple.WebKit.Networking
26 MB Microsoft Word
Virtual Memory Information: ℹ️
21 MB Free RAM
1.01 GB Active RAM
992 MB Inactive RAM
1.00 GB Wired RAM
1.14 GB Page-ins
49 MB Page-outs
I hope you'll be able to help me.Right, sorry. I'm new at this stuff and I got confused. Here's the list:
EtreCheck version: 2.0.6 (91)
Report generated 22 Oct 2014 15:43:33 GMT+2
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 2:39:48
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (310.28 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.barebones.authd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
User Login Items: ℹ️
HPEventHandler UNKNOWN (missing value)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.4.2.18903 Support
Unity Web Player: Version: UnityPlayer version 4.0.1f1 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.3 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 4.1.10329.0 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.3 Support
GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 Support
ViewRightWebPlayer: Version: 3.3.0.0 Support
proXSignXML: Version: 1.2.21 - SDK 10.5 Support
JavaAppletPlugin: Version: Java 7 Update 55 Check version
User Internet Plug-ins: ℹ️
OctoshapeWeb: Version: 1.0 - SDK 10.8 Support
Picasa: Version: 1.0 Support
Google Earth Web Plug-in: Version: 7.1 Support
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Spelling Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 188.97 GB
Destinations:
VERBATIM HD [Local]
Total size: 999.86 GB
Total number of backups: 2
Oldest backup: 2012-10-07 19:12:45 +0000
Last backup: 2012-10-07 19:12:45 +0000
Size of backup disk: Adequate
Backup size 999.86 GB > (Disk used 188.97 GB X 3)
Top Processes by CPU: ℹ️
5% Safari
4% coreaudiod
3% WindowServer
1% hidd
0% Microsoft Word
Top Processes by Memory: ℹ️
193 MB Safari
26 MB WindowServer
26 MB Skype
21 MB PluginProcess
21 MB mds
Virtual Memory Information: ℹ️
32 MB Free RAM
852 MB Active RAM
828 MB Inactive RAM
1.02 GB Wired RAM
2.15 GB Page-ins
95 MB Page-outs -
Ipad receiving emails but they do not come on to the mac for quite some time
Hi My Ipad is receiving my emails, the alert sounds, but the Mac doesn't receive them for quite some time after, is there a reason for this and how can I overcome the problem.I've just sent two emails and the response to both are on the Ipad, which is next to my computer, and I can see the Mac isn't showing anything in my inbox!!!!
Regards
RichardHi Thanks to everyone for their help, I've checked what has been advised, for some unknown reason both Ipad ans Mac receiving emails at the same time. I do apply rules to my incomming mail, due to the fact of persistent male medical tablets advice !!!!!! from certain sites and also people needing money! Idid check there and deleted the last rule, whether something I did in that particular rule gave this problem I will never know. Do you think adding rules in mail preferences is the correct way to stop unwanted mail or is there a better way?
Richard -
I have not used my ipod touch for quite some time and can't get it to sync. message is that my computer does not recognize my device
Try this article and the related articles on the left hand side of the the article:
http://support.apple.com/kb/TS1567 -
I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,
Open Media Encoder and add your Sequences:
File > Add Premiere Pro Sequence
Navigate to your Premiere Project and select it in the list.
You can then select multiple Sequences from the Project (Ctrl+Click)
and load them all at once into Media Encoder and apply
the same encoding preset to all Sequences at the same time. -
Have searched Forums for quite some time now. Cannot find a correct answer to: how do I prevent my old email address from appearing as the "from:" address when I use a "send this" link on a webpage/news article. The email window opens and automatically inserts my old Hotmail address instead of the Yahoo address I've used for a long time. (The drop-down won't let me change it or delete it.) Thanks.
Do you get a drop down list with suggestions if you clear that "from" field and click elsewhere on that page to move the focus off that field and then double-click again in that field or start typing the first letters of that unwanted email address?
Use these steps to remove saved (form) data from a drop down list:
#Click the (empty) input field on the web page to open the drop down list
#Highlight an entry in the drop down list
#Press the Delete key (on Mac: Shift+Delete) to remove it.
*Form History Control: https://addons.mozilla.org/firefox/addon/form-history-control/
*Tahoe Data Manager: https://addons.mozilla.org/firefox/addon/data-manager/ -
I just installed the app on my phone and the question is above.
Thanks all!To clarify, a subscription to the PS+LR Photography Plan has a different LR license than your current serial-number-licensed LR, and each license-type can be installed on 2 computers, so you could have LR on up to four computers, two of which can be running the CC licensed version of LR along with the CC-licensed version of PS, and two running the serial-number-licensed LR without PS-CC.
If you have your catalog and photos on an external drive that you can swap between the various computers, then you could use any of the up-to-four to work with your photos. You could also have as separate catalog on each of the up-to-four computers, but then syncing would get complicated if you try to do that on more than one LR catalog, I think, though I could be wrong, because I only use LR Mobile with one catalog, currently. -
I have been successfully synching my iphone and pc using outlook for some time, using the icloud. suddenly, events entered on my iphone, although they are transferred to the icloud, do not appear on my outlook calendar on my pc. Entering events on my pc does add them to the icloud and my iphone. Is there a setting that I may have changed that would allow the icloud to add iphone items to the outlook calendar?
I finally got it to work.
mjbart, here are the steps I took in Win7 to fix everything. (All has been working perfectly now for several days).
I went to the iCloud Control Panel on Win7 and signed out. That asked me if I "wanted to keep a copy of my iCloud Contacts, calendars, and tasks?".
I responded by clicking on the "Delete from Computer" button, which then advised that I would lose my Contact Groups if I continued, so I then clicked on the "Save Contact Groups" button.
After all the dust settled, I then Signed back into iCloud via the Winndows Control Panel and checked the Contacts and Calendars boxes.
After a few moments all devices were properly synced and synchronizing.
So far so good. Hope this works for others! -
guys hele me please..
If you would like to contact one of the UK based BT Care Team who moderate this forum, they should be able to help you.
They can be contacted using this link BT Care Team
They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
I have just recently updated my Ipad to 7.1.1 software. I lost my photos, can i get them back? when i pressed new ipad instead of old
Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan -
Help! My browser window is suddenly not formatting properly. (losing browser formatting, glitch, bug) I'm using FCP 7 on an iMac with OS X 10.8.5 and have been successfully doing so for a couple of years. I fear my Final Cut Pro is corrupt and I have to re-install. Anyone ever see this problem? Old projects display and behave fine in the browser, but any new project I create, totally loses the formatting in the browser and the browser also does not display the "effects" window properly anymore. (see below)
YOU ARE A LIFE SAVER! I reinstalled the program and everything. THANK YOU! THANK YOU! MY HERO!!!
-
This question has been on my mind for quite some time...
I've been an avid user of iTunes for nearly a year now, and I used it even before I purchased my new Mac.
This has been bugging me like a piece of gum stuck to my shoe, so I have to ask: Sporatically and erratically, when I drag albums, artists, or songs to a specific playlists, iTunes will automatically start playing the first song from the dragged artist/album or the song itself. I HATE this. I don't know why it happens so randomly, too. I can add/delete all I want for hours on end and it won't happen - other times, it happens nearly everytime I add a new album/artist/song to a playlist. It wouldn't be annoying, except that I'm always listening to some other music on iTunes at the time, and thus when iTunes starts playing another song from my dragged selection, it HIGHLY annoys me.
I've looked in the preferences window and can't find an option of any sort that can help me. What do I want, or rather, don't want? I don't want iTunes to start playing a song from a dragged selection when I add it to a playlist. I want it to avoid that. Am I out of luck as far as controlling this erratic beast? I've only used Macs since June of this year and I do not remember this happening with my horrible Windows version of iTunes at all.
Please help.What version of iTunes? In 6.0.1, you can go to iTunes/preferences/advanced/importing and uncheck "play songs while importing". It will be slightly different with earlier versions of iTunes, but the wording should be similar enough.
-
Hello, my phone was being slow so i turned it off. when i went to turn it back on it did the usually white apple logo but it has been on that logo for 15 or more minutes now what do i do?
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
-
.
Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer. -
The message also states that I should check the proxy settings to make sure thaey are correct-I have no idea what this means,and says also to contact the network administer to make sure the proxy server is working.This is my home computer so I guess I am the administer.If it is any help I run system mechanic 10.5,but cannot find anything in system mechanic that I recognize as helpful.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Maybe you are looking for
-
Hello all, I want to use my iPad to write assessments of my students papers, the form I have to use for these assessments has a number of images, like the schools logo etc., after transfering the pages document to Pages for iPad the images have disap
-
Creating Indexes in Cluster Tables
Hi, I want to enable the index for the a cluster table..how is it possible..As we see for transparent tables like MSEG ,index tab is enabled but tables like BSEG the option is disabled..Please help me find a solution.. Regards Maria
-
Hi, I am having a problem when deploying a model from Veristand (Windows) to a PXI equipment. Let's start from the beggining: I have written a simulink model and compiled it for Veristand 2014 target. This generates a DLL, that I load it in Veristand
-
What is the original file /private/etc/hosts ?
Trying to understand I made a bad edit ! Thanks !
-
I have mac osx 10.6.8, what is the difference vs snow leopard
i have mac osx 10.6.8 should i download snow leopard, I cant not open excel, error message appears, and they recommend dowload software again. I compleated all actualizations available...