Best laptop for Premiere Pro CC 2015?

Hi
I have a nice system at my homeoffice, but now I need a laptop too, for when I´m working at another office in town. I´m in a bit of a hurry, and have not catched up lately on all the new laptops and stuff, so I hope some of you guys will give it a try and help me with this one ;-)
I allready have an 4 year old laptop with only 4 GB RAM and even though it did a reasonable job years ago in Photoshop CS4 etc. it really doesn´t work for anything else than Word and internetbrowsing anymore.
So I need a laptop that will do nice, but not a 10.000$ workstation laptop...
I mostly edit AVCHD files and nothing above 1080 50P, but who knows if I will not have to deal with 4K within a year. But the 4K is not a real dealbreaker - 1080 will be just fine for a while I guess, as I mostly edit videos for online use. Besides from Premiere I use Indesign, Photoshop. Illustrator and Lightroom a lot.
As I ám going to be sitting in a small office with two other persons, I really need a laptop that does not make to much noise when idle or during normal use (like photoshop, etc.) I can live with a bit of noise when encoding/exporting video, but not while I am edditing in Premiere...
I have thought about the ASUS ROG G751JT-T7018H - wich comes with 16 GB RAM, 256 GB SSD + 1 TB HDD / 7200 rpm,
NVIDIA GeForce GTX 970M - 3 GB GDDR5 and thunderbolt....
So the pricetag would about 2500 $ I guess - don´t want to spend more. Anyone having experiences with this laptop - especially concerning noiselevel?
My questions is (and these question are general questions - not only concerning the the ASUS mentioned above):
1. Is 16 GB RAM sufficient - or will 32 make a huge difference? I did not see much improvements when I upgraded my desktop from 24 to 64 GB RAM...
2. Wich Geforce xxxM cards should be avoided - if any? Is the 970M supported?
3. Would it be better with one 1 TB SSD disk instead of 256 GB SSD + 1 TB HDD? Heat- and noisewise?
4. Think I read somewhere that an external disk (RAID) with Thunderbolt could speed up things - make editing smoother - any thought about the Thunderbolt?
If you have any suggestions or experiences with running Adobe CC on any of the newer laptops from 2014/2015 please share them.
Thx in advance - and sorry for the long post...
Cheers

HI Bill
THank you for the quick reply..
I have read a few reviews of the Asus Rog today, and it seems to be the best choice right now. At least for me. So I am very glad to hear, that you have had so good experience with the Asus as well.
My biggest concern is noise from the coolers, because I need to have a very lownoise laptop when I sit in the new office. The room is small and we need to work with some kind of noise reduction because the walls and floor is quite hard and kind of amplify all sounds in there :-)
Another thing: the one I plan to buy gomes with 16 GB Ram (2 x 8) a 256 Gb SSD and a 1 TB 7200 rpm HDD. I might be able to live with this setup - at least for some time. i guess I could just put in another 16 Gb ram and change the HDD some day in the future when my needs eventually changes. SSDs comes in 1 TB now - could that be the way to go? Keep the 256 and change the 1 TB from HDD to SSD...
I also read a bit more about Thunderbolt. Seems to me, that with fx. a LaCie extermal  Thunderboltbased raid system I would be able to edit fluid 4K directly from the external disk???
The only thing I reslly dont like with theAsus Rog series is the gamer design. I can almost smell the rubber. i would rather have an aluminium/carbon cased monster instead. But I can live with that as long as the specs looks so good.
Anyone else having any comments on the Asus? Please share ;-)
/ Morten

Similar Messages

  • Best Laptop For Premiere Pro Editing?

    I've used my Sony Vaio for over 4 years, it's getting a little long in the tooth.  Does anyone have a preference or aversion to certain brands of laptops?  At this particular moment, I'm leaning towards a Dell...primarily because it allows for a second hard drive and has plenty of horsepower.   A second HD apparently is no longert an option with Sony.  Any assistance will be greatly appreciated!

    Many thanks to all for your constructive input!
    I elected for the Sager NP8120.  I have three 500 gig 7200RPM  hard drives, two of which are configured for RAID 0.  I suppose the driving factors were the number of hard drives and video card.  I've fully invested in the Adobe CS5 Master Collection, so it made sense to maximize the capabilities.
    Now for the hard part...putting everything to work

  • Best laptop for Premiere Elements

    Can you recommend a laptop for Premiere Elements.
    I have PE9 and thinking about PE10.
    Preferably matte screen.
    UK based so Sager not really an option.
    Thanks

    Laptops are never best for video editing, since they're usually built for portability rather than power. They also cost about 50% more than desktops for the same amount of power.
    But what type of camcorder is your video coming from?
    If you are editign tape-based video, a dual-core processor and 4 gigs of RAM with a 500 gig hard drive should be adequate.
    If you are working with AVCHD video, you should go for a quad core or i7 processor running Windows 7 64-bit.

  • FAQ: What are the best resources for Premiere Pro CS6?

    Here are high quality resources for troubleshooting and tutorials related to Premiere Pro CS6.
    Premiere Pro CS6 troubleshooting articles
    Issue: I'm having trouble downloading and installing Premiere Pro CS6. What do I do?Answer: See troubleshooting documents, post in the appropriate forum, or contact support.
    More info: http://blogs.adobe.com/aftereffects/2013/09/troubleshooting-issues-with-downloading-and-in stalling-after-effects.html
    Issue: What are the system requirements for Premiere Pro CS6?See this article: http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe%20Premiere%20Pro%20CS6% 20system%20requirements
    Issue: Why won't Premiere Pro CS6 play back AVCHD media?Answer: Update to Premiere Pro CS6 (6.0.5). Previous versions of CS6 had this issue.
    More info: http://blogs.adobe.com/premierepro/2013/08/premiere-pro-cs6-6-0-4-update.html
    Issue: Does Premiere Pro CS6 work with OS X 10.9 (Mavericks)?Answer: Yes, make sure you update to Premiere Pro CS6 (6.0.5)
    More info: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
    Issue: Is there a trial available for Premiere Pro CS6?Answer: Yes, subscribe to the free version of Creative Cloud, then download the trial.
    Issue: I'm having unexpected behavior in Premiere Pro CS6 and want to trash preferences. How do I do that?Answer: See this blog post: http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html#more-537
    Issue: I'm getting errors related to QuickTime. What do I do?Answer: See this blog post for troubleshooting items related to QuickTime: http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
    Premiere Pro CS6 tutorials
    Issue: I'm new to Premiere Pro CS6. How do I get started?Answer: See this blog post: http://blogs.adobe.com/kevinmonahan/2011/05/20/getting-started-with-adobe-premiere-pro-cs4 -cs5-cs5-5/
    Issue: I'm switching to Premiere Pro CS6 from Final Cut Pro 7. Are there any tips for me?Answer: See this article by Scott Simmons on Pro Video Coalition: http://provideocoalition.com/ssimmons/story/105_adobe_premiere_pro_cs6_questions_answered
    Issue: I just switched to Premiere Pro CS6 from Final Cut Pro 7. Are there any missing features between the applications?Answer: See this article: http://provideocoalition.com/ssimmons/story/10_fcp_things_fcp_editors_might_be_missing_in_ adobe_premiere_pro_cs6
    Issue: Are there any good, free Premiere Pro CS6 tutorials available?Answer: See these tutorials: http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
    Issue: How do I optimize Premiere Pro CS6 for best performance?Answer: See this article: https://www.video2brain.com/en/courses/after-effects-premiere-pro-performance-workshop
    Issue: How do I operate the multicam function in Premiere Pro CS6?See this article: http://provideocoalition.com/ssimmons/story/working_with_multicam_in_adobe_premiere_pro_cs 6

    Hi ..
    GO to website www.Apache.org
    down load Apache tomcat server .
    install it ...
    Go to sun site
    c and download jsp tutorials ...
    Go to
    (www.coreservlets.com)download book core servlets
    u can find lots of nice books supported by sun on sunwebsite ...
    Now u r equipped ....
    start doing everything (R &D) on server ..
    Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
    I thing once u go through this ..it will do all what u want
    Hope it helps
    Best of Luck :)
    regds & take care

  • Are these good laptops for Premiere Pro Cs5?

    Okay so I will be going off to college soon (September) and I will be buying my first laptop for this reason, but I will be doing full HD videos on it. I help photographers and videographers with photo retouching and video editing as well as making music videos and I need a laptop that will handle Premiere Pro Cs5 (acutally the whole production premium suite). I can't buy a desktop yet because my first semester is abroad and I can't travel with much weight. These are the ones I have been looking at:
    Asus G73JH-RBBX05
    http://www.bestbuy.com/site/Asus+-+Laptop+/+Intel%26%23174;+Core%26%23153;+i7+Processor+/+ 17.3"+Display+/+6GB+Memory+/+500GB+Hard+Drive+-+Black/9741729.p?skuId=9741729&ci_src=14110 944&ci_sku=9741729&ref=06&loc=01&id=1218165344675
    ASUS N61JQ-X1
    http://www.newegg.com/Product/Product.aspx?Item=N82E16834220696&nm_mc=OTC-Froogle&cm_mmc=O TC-Froogle-_-Notebooks-_-ASUS-_-34220696
    Asus G51JX-X2
    http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=5592727&SRCCODE =GOOGLEBASE&cm_mmc_o=VRqCjC7BBTkwCjCECjCE
    Dell Studio 17
    http://configure.us.dell.com/dellstore/config.aspx?oc=dndotw5&cs=19&dgvcode=ss&c=US&l=EN&d gc=SS&cid=27399&lid=627062
    I'm open to sugestions but I won't buy anything from HP, Sony, or Toshiba because I have had problems with their products.
    Also would an intel core i5 handle Premiere and After Effects?
    I usually make 3 to 4 videos and 100 images every 10 days but I can reduce the production to 2 and 70 if I have to.
    Thank you in advance.

    I recently purchased the Dell Studio
    16 XPS with SSD and an i7 processor to do
    nothing but Photoshop, Lightroom, and PP CS5
    processing for approx 2 TBs of past & present video
    footage  (including AVCHD) and full HD 24P and 30P
    footage from my DSLR; I run WIN 7 with 64 bit in 8 GB ram; all
    my cache's are on the SSD and I have gigabit network
    that serves up my source files at approx 40-70 MBytes/sec
    (depending on the file or files); I use the QNAP TS259 Pro as
    my NAS; the Dell has the ATI hi-performance graphics card
    that only partially takes advantage of the Mercury Playback
    Engine(no hardware acceleration with the ATI); I'm extremely
    happy with the technologies; I can do the majority of my video
    editing W/O pre-rendering altho at times for precision stuff I do
    pre-render; having the historical perspective of using PS & PP since
    1997 on Windows platforms I can assuredly tell you that the
    performance and productivity uplifts from the marriage of these
    software & hardware technologies is nothing short of miraculous;
    I couldn't be happier; don't skimp on your laptop: 1)i7 2)8GB or more
    DDR3 RAM 3) fast disks or SSD  4)HD capable monitor and 5) graphics
    card that preferably takes full advantage of the Mercury Engine; you'll need
    to shell out about $2500 for all of this (excluding the 30" monitor that I use with mine)
    Hope this helps....

  • What is the best cpu for Premiere Pro and autocad?

    I am considering these three cpu's. My build has to run Premiere Pro CS6 and the latest Autocad (I know this a Adobe forum, but if any out there also run Autocad in addition to PP...let me hear from you and what your build is).
    I am PP hobby enthusiast/student/want to eventually have video postproduction company in future. Right now autocad is 'bread and butter' part-time.
    These three are in my price range...which would you choose for PP and why? (side comments about autocad suitability also appreciated)
    1. Core i7-3930K  Sandy Bridge-E 3.2GHz (3.8GHz Turbo) LGA 2011 130W
    2. Core i7-4770K Haswell 3.5GHz LGA 1150 84W
    3. Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo) LGA 1155 77W

    Note that AutoCad is not an avanced software, it only uses one cpu thread (so if you have a fast solo processor that's all AutoCad makes use of) but the cpus mentioned above are the fastest cpus per single core. I don't know about the Premiere Pro i.e. what this program does in the regard of utilizing all cores and threads, but AutoCad for sure does not. So an AutoCad machine only needs a fast CPU, good memory and a graphics card that AutoCad knows how to make use of in 3D (if you are using AutoCad for 3D) but AutoCad is definitely not the program to consider for use in 3D modeling. AutoCad is still vector based program (and probably will continue to be in future, since there will always be some need for vector based design software) but Autodesk does have software that is not vector based like Inventor.

  • Best Computer For Premiere Pro CS4

    I have used Premiere Pro CS4 on a few different types of computers so far; some work better than others. The one I currently have works pretty good, but when my projects become complex, my system begins running very slow, and the program unexpectedly shuts down very often, so I have to keep saving my project after ever little action. I am currently using a Dell Precision T3500.
    I am now looking for a new computer that will run smoothly even with highly complex Premiere Pro Projects, but at the same time I do not want to spend more money than I need to.
    Does anyone have any suggestions? Any insight I can get on this would be greatly appreciated. Thanks!
    -Rick

    Rick,
    Which CPU is your T3500 equipped with? How much RAM is installed? How many hard drives? Which graphics card (GPU)?
    If you're going to continue using CS4 (which does not take full advantage of systems such as yours), and you have one of the lower-end configurations, a new build is definitely in order: Dell charges you an astronomical price just to upgrade anything at all from the (underpowered) base configuration. For CS4, go relatively heavy on the CPU but not so much on the RAM or GPU.
    However, your system could warrant an upgrade to CS5.5 if that system has already been upgraded at the factory with faster CPUs and GPUs or if that system has already been equipped with a hexa-core Xeon W36xx series CPU and you're willing to upgrade the graphics card and/or RAM yourself.

  • Best laptop for Premiere

    What Windows Laptop under $1500 can run Premiere effectively?

    First we have to know what media you will be dealing with. And something about your workflow.
    Here is what I have done and am using at this very moment.  I had to cut corners on this laptop to fit it into my budget.  In January this year I bought a refurbished ASUS G750JW for just over $900 ( just saw Newegg now has it for only $850) and upgraded the memory from the initial 8 GB to 24 GB by a very simple operation.  This computer has provisions for two hard disk drives and the furnished drive was a lousy 5400 rpm drive which has no use in video editing.  I cloned the OS and applications to a Samsung 840 Pro 128 GB SSD with the furnished Samsung Magician Software.  It was simple.  I removed the 5400 rpm drive and put the SSD in its place and the system worked perfectly.  I then installed a 256 GB Samsung 840 Pro in the second disk slot.  Total cost $1450.
    I have just recently edited a hour long three AVCHD camera shoot that worked beautifully.  Now you have to remember that there is only one way to edit video on a laptop, you have to keep it plugged into the AC power so that it does not go into battery saving mode and throttle CPU and GPU down.  I just checked last night and played the video from the Premiere timeline with playback set to full resolution and in the hour long video it only missed 6 frames.
    Also I have found a very high performance USB3 flash drive that is fast enough to be useful to hold the project file and the media for editing.  It is the PNY Turbo USB 3 128 GB for only $49 with 190 MB/second Read rate which is faster than 7200 RPM disk drives.

  • Laptop for Premiere Pro and after Effects

    Hello Everyone,
    I would like to buy a new laptop to work with premiere and after effects. I found this one at Schenker and costumized it.
    Do you think this is a good one? Did I make the right decisions in costumizing?
    Thanks!
    Marius

    Some previous discussions from the Hardware sub-forum
    http://forums.adobe.com/community/premiere/hardware_forum?view=discussions
    Laptop Video Editing PC - http://forums.adobe.com/thread/1369220?tstart=0
    -Laptop to edit 4k red video http://forums.adobe.com/thread/1108124

  • Graphics card HELP for premiere pro CC

    So I've spent hours reading numerous forums in regards to what graphics card is best suitable for premiere pro cc that isn't overly priced (I.e. Quadro k4000 and 5000) I'm trying to stick in the 400-500 range for the PC I'm in the process of building. I need to know anyone's recommendations for a GOOD graphics card that isn't so expensive? I know they exist, I'm just not sure which fits best for premiere pro CC as well as the rest of adobe CC. I mean I hear people mentioning AMD vs quadro and GTX 680, etc. I know there's a list of approved cards from adobe, but that isn't what I'm looking for. I want one that will give excellent performance without emptying my wallet costing so much.  Please, any suggestions are greatly appreciated, thanks guys!
    -Andy

    Actually, I tend to agree with cc. That i7-4770 cannot be overclocked at all - not even in a limited manner (outside of the normal turbo boosting) - to start with (the maximum multiplier on the Haswell i7 CPUs is permanently locked to its nominal stock setting or its maximum stock turbo setting, depending on how the motherboard BIOS reads the settings). Second, that i7 has only four physical cores (albeit with hyperthreading). Third, no single non-RAID 7200 RPM hard disk has a sustainable maximum transfer speed above 190 MB/s even on the outer tracks (where the transfer speed is typically highest). As a matter of fact, I tested my auxiliary PC that's equipped with an i5-2400 and 16GB of RAM, and tested it with both older-generation GPUs (a GTX 560 non-Ti and a GTX 560 Ti 448-core), and while the GTX 560 Ti 448-core did perform about 50 percent faster than the plain GTX 560 (39 seconds versus 59 seconds - or put it in converse, the GTX 560 performed one-third slower than the GTX 560 Ti 448) in the MPEG-2 DVD test of the PPBM6 suite, the real-world improvement does not come anywhere close to the benchmarked difference (with either GPU, the i5 system took between an hour and an hour and a half to convert 40 minutes of HD material to MPEG-2 DVD using the VBR 2-pass method). This means that with such longer material, the CPU and memory performance comes more into play.
    Oh, did I forget to mention that Western Digital and its HGST subsidiary are the only brands that offer a consumer-level (desktop, as opposed to enterprise) 4TB hard drive that spins at 7200 RPM? (Seagate's 4TB hard drive spins at only 5900 RPM while Toshiba does not currently offer a consumer-level 4TB hard drive.) Outside of WD and HGST, you'll have to buy a much more expensive enterprise-level drive to even find a 4TB drive that spins at 7200 RPM.
    And unfortunately, at current street prices, the lower-end GT/GTX 6xx series GPUs are just too expensive for their performance. In fact, the GTX 650 Ti Boost and the GTX 660 are both priced too close to that of a GTX 760 for their own good right now (unless you go for a card that's equipped with the less desirable 1GB VRAM configuration based on either of those GPUs).

  • Windows 7 - which version to buy for Premiere Pro 5.5?

    Ive had a quick scout about but I cant seem to find a definitive answer to the question of which version of 64 bit Windows 7 is the best option for Premiere Pro? I didnt want to waste money by purchasing Ultimate only to 'tune' out most of the services - ala black viper's 'barebones' setup, to get the best from my limited hardware setup
    I am bulding the following simple system for a Non internet connected workstation for exclusive SD editing purposes, amd 64, 8Gb, GTX550 TI, 160 Gb Velociraptor primary drive, 2 Tb Assets drive and a 1 Tb output drive. I will be running production premium.
    Any guidance would be greatly appreciated.
    Cheers guys, Les

    Win7 Home Premium is enough, but if you ever consider upping memory beyond 16 GB or using network services for a home network or backing up to a NAS, then you are better off with Win7 Pro. The price difference is small, so Pro looks like the better, more future proof option.

  • Best Training Materials for Premiere Pro?

    I'm a long time pro veteran of Photoshop, but fairly new to video editing and a total noob w Premiere Pro CC  (and after effects) I want to get on the fast track learning Premiere Pro and guess that taking an online video course is the most efficient path.
    I don't know if there are any courses yet for Premiere Pro CC 2014, but I suspect that I can make do with a good CC course. There's Lynda.com, and the Pearson/Adobe Press/Peachpit series (perhaps others that I haven't found yet) I'm not seeing much in the way of online reviews for these. Any forum denizens have useful opinions to share?
    I have only used iMovie, and GoPro Studio2. I prefer video training for general learning, with printed books (or PDF) for reference.
    Thanks!

    I second Lynda also.
    These are for free.
    What is Premiere Pro? | Adobe Premiere Pro CC tutorials

  • Mac vs. PC for Premiere Pro CC with a budget of...

    $3300.00  ... That's what I'm budgeting.
    Warning:
    I know any post of Mac vs. PC can spark a lively debate and I sense much of this forum's base are PC users but hopefully I'll get some honest and sound advice/purchase options.
    Purpose:
    I'm a current Mac user not wanting really to go back to PC but I'm about to make a purchase so I wanna be open to the idea if it's gonna make life better for me while editing. As crazy/stupid as it sounds...my fear of returning to the PC world is mostly because of my memory of the years of having to deal with the need for Virus Protection on a PC. I have bad memories from having to renew/pay for that every year and it slowing things down and ultimately my last PC was infected and crashed. But my editing is what I do 6 days a week on this computer for work. I used to be a FCP user so Macs made sense but now I'm all in on Premiere Pro CC so maybe a PC would be best...or maybe I should just stay with Mac. Who knows?! Bottom line: I use Premiere, Audition, Encore and Photoshop with 90% of it on Premiere (using basic cuts, cross dissolves, extensive use of Warp Stabilizer, and the occasional gaussian blur). I also use this computer to go online. That's about it. Mostly.
    Current State:
    I have a 2011 iMac with a 27" screen. Love that size. It has 3.4 GHz i7, 16GB 1333 RAM, AMD 6970M 1GB VRAM GPU, 120GB SSD (OWC 6G) running the OS and apps, and I also have a Elite Pro Dual eSata HDD + Thunderbolt adapter (RAID 0) from MacSales.com that I currently use as my scratch drive.
    Option #1:
    I was just about to purchase the newest iMac with most of the upgrades for what would be $3300. The upcoming 2013 Mac Pro looks nice and I love the idea of being able to upgrade as I go, but it doesn't come with a screen and I can't necessarily afford it when you add that in. Plus it doesn't come out for a couple months and honestly I have a great offer in right now on my iMac that I'm about to sell.
    The iMac I was intending to get as soon as next week was:
    2013 iMac with the 27" Screen
    3.5 GHz Quad-Core Intel i7 ("Turboboost" up to 3.9 GHz)
    1TB "Fusion" Drive (Apple's 120 SSD + 1TB HDD mix)
    32 GB of 1600 MHz RAM
    NVIDIA GeForce GTX 780M (4GB VRAM)
    4 USB 3.0 Ports
    2 Thunderbolt Ports
    PRICE: $3300 (about)
    Option #2:
    A PC of some sort that's upgradable going forward and optimized for what I use it for primarily (see underlined and bold above). I truly have been out of the PC world sooo long and I know that each "side" has their advantages. I love Mac but I'm just wanting to get the best machine for Premiere for my budget. I've been a loyal mac user for years but I'm no fan boy (eg. I happily own a Galaxy S3 by choice)  I was excited to get the newest iMac released just a couple weeks ago but then tonight I saw this site (http://pcpartpicker.com/) and started thinking about my options.
    I will be selling my 2011 iMac to help pay for the new one so I can't keep this one. That money has factored into my budget. It's been great but I feel like it drags and hangs with MPE enabled sometimes so I figured a newer computer would help.
    Also...SSD. I have read great things from various posts about the Samsung 840 Pro SSD's so I may pick one or two up eventually to supplement or replace my current scratch drive.
    I'd love someone to toss out if I should go option #1 or if there's a better Option #2 out there.
    Thanks!

    cc_merchant wrote:
    1. You don't need a separate audio card, audio is included on the motherboard.
    2. Do you need wifi on the motherboard? Then look at the P9X79 DeLuxe.
    Re: #1) Done! No idea about that.
    Re: #2) Again, no idea. You tell me, do I need wifi on the motherboard or not? And I don't see that DeLuxe option. I'm just picking things that sound nice outside of what you had for your "Low-End Warrior Setup". I'd honestly rather you tell me what works and what doesn't because again, I have almost no idea here.
    Like I said before, I totally guessed on the type of RAM (brand? 1600 vs 1866? etc), the Case (all I knew was to get a Full Tower), the OS (8 vs 8.1 vs. 32bit vs 64bit), and the monitor (comparible to iMac's 27" monitor?) and other things like sound cards and wireless network adapters (of which I may not need apparently). Also, I switched the GPU to the GTX 770 because it's listed on Adobe's supported cards list. Not that the 760 wouldn't work but maybe this one "future proofs" it a bit more and plus most of the footage we handle is 60fps edited and exported at 24fps so according to that Tweaker's link above, a great GPU help. It does have 4GB VRAM instead of 2gb so I don't know what difference that makes but I figure its better. As for "brand" I took a wild guess and went with Gigabyte, not sure if that's good or not.  FYI: By comparison the iMac I'm debating has a GTX 780M GPU with 4GB VRAM. You tell me if this was smart. Still under budget.
    So many questions remain. cc_merchant, feel free to lay out your wisdom and help me shape my purchase based on what you know. I like hearing things like "don't need that" or switch it out for "this one" instead. If it goes over $3300 by a touch (not too much), that's okay as long as it's gonna be THAT much better than the spec'd out 2013 iMac listed above.
    Thx again.
    Here's where I stand...
    CPU
    Intel Core i7-4930K 3.4GHz 6-Core
    $573.98
    CPU Cooler
    Noctua NH-D14 SE2011
    $74.99
    Motherboard
    Asus P9X79-E WS SSI CEB LGA2011
    $465.99
    Memory
    Corsair Vengeance 32GB (4 x 8GB) DDR3-1866
    $325.68
    Storage
    Samsung 840 Pro Series 256GB 2.5" SSD
    $209.99
    Seagate Barracuda 1TB 3.5" 7200RPM
    $59.99
    Video Card
    Gigabyte GeForce GTX 770 4GB
    $447.99
    Wireless Network Adapter
    Asus PCE-N53 802.11a/b/g/n PCI-Express x1
    $32.99
    Case
    Rosewill BLACKHAWK-ULTRA ATX Full Tower
    $189.99
    Power Supply
    Corsair 860W ATX12V / EPS12V
    $166.49
    Optical Drive
    Asus BW-14D1XT Blu-Ray/DVD/CD Writer
    $88.98
    Operating System
    Microsoft Windows 8.1 - OEM (64-bit)
    $96.99
    Monitor
    Asus PB278Q 27.0"
    $549.9
    TOTAL: $3284.03
    Any Suggestions? Changes? ....

  • Optimal Hard Drive Configuration for Premiere Pro CS5 and Pro Tools

    I am in the process of upgrading a workstation that is used primarily for multi-track audio recording in Pro Tools to use the following Adobe CS5 products for production of promotional videos in HDV (and AVCHD for the web) as well as printed marketing materials for bands and musicians: Premiere Pro, Encore, Photoshop, Illustrator and Soundbooth.
    Since Premiere Pro is probably the most demanding application of the group, I have been studying the suggested hardware configurations on this forum with great interest, particularly HARM's suggestions (including his Generic Guideline for Disk Setup) to determine which hard drives to purchase and the optimal manner in which to configure them.
    I am upgrading an HP Z800 with dual quad core 2.44 GhZ processors with hyperthreading (16 virtual cores), 12 GB of memory and an overclocked GeForce GTX 470.  Without setting up a RAID configuration (which I cannot afford at the moment), I would like to use the 4 available HDD bays in the Z800 in the optimal manner for Premier Pro, using currently available drives.  I am currently considering purchasing a 300GB VelociRaptor to use as my C drive because of the extended load times and demands placed on the drive by ProTools and the associated Waves plug-ins.
    I would appreciate suggestions to improve my following plan:  C (300GB  WD VelociRaptor) for OS and Programs; D (1 TB WD Black Caviar) for Media and Projects; E (1 250 GB WD Black Caviar) for Pagefile (approx. 18 GB) and Media Cache; and E (2 TB WD Black Caviar) for Previews, Exports and Pro Tools audio files.
    I have great respect for the knowledge of the members of this forum and eagerly await your suggestions.
    /Bill

    I very much appreciate the responses to my email because I know that all of your time is valuable and that you have chosen to use some of that valuable time to help an unknown individual.  This forum is remarkable because of the wealth of knowledge available and the willingness of so many to assist others.
    I now wish to narrow my questions to save you time and so that I can get specific advice.  I may not have not been clear that I have already upgraded to the HP Z800 with dual quad core processors and overclocked GTX 470, primarily for the improved performance it will provide in ProTools.  My question now is how to optimize its performance for Premiere Pro CS5.  Based upon my research, I am considering the following two upgrades, but I am open to other suggestions if they would provide better results at a similar cost
    1. I am considering purchasing a 600GB WD VelociRaptor ( WD6000HLXH) for my C drive on which I would place OS (Windows 7, 64 Bit) and programs in an effort to reduce loading times of large programs.  I have two questions: (1) Are members of the forum seeing a significant improvment in program loading times with the VelociRaptor because I am still not convinced that the price performance of SSD's justifies their use; and (2) There are so many models of VelociRaptors now that I want to be certain that I am purchasing the best version for my needs.  In addition to the usual 10000 RPM speed, this model has 32MB Cache and a 3.5" form factor as well as a SATA 6.0GB/s interface (which I doubt my motherboard can take advantage of but it might extend the useful life of the drive with future configurations).
    2. I currently have available for installation in the Z800 the following drives:  (1) WD 2TB Black Caviar; (1) WD 1TB Black Caviar; (2) Hitachi 1TB.  I believe that the Z800 can accept up to 5 SATA hard drives which I will have if I purchase the Velociraptor.  Although I am reasonably knowledeable when it comes to hardware, I have never set up a RAID configuration.  Therefore, it would be helpful if someone could recommend one of the various RAID configurations and brieflyexplain why it would seem to be best for my needs.  I can then focus my research on understanding that one configuration.
    I was planning to follow Scott's suggestion for my current 3 drives:  OS and programs on C (WD 600 GBVelociRaptor), media and projects on D (WD 1TB Black Caviar), export files and Pro Tools files (all live musician tracks, no samples) on E (WD 2TB Black Caviar).  However, I have been reading about the benefits of a RAID configuration so I am interested in further suggestions now that I have clarified my questions.
    Thank you all for your help.
    Bill

  • PProHeadless.exe has stopped working for Premiere Pro CS6

    I have had no problems with it until today.
    The video I was trying to produce was about 31 minutes long.
    I have had this PC less than a year and have never had PProHeadless.exe stop working for Premiere Pro CS6.
    what causes this to happen, has the last batch of updates caused this?
    PC specs:
    Windows 7 64bit fully updated
    MoBo Asus P6X58E-WS
    i7 quad core 950
    24 gigs of Ram
    10,000 rpm's Hard Drives
    very few things installed on this PC to avoid application conflicts, and I had no other applications running.
    Thanks for any input,
    Best regards,
    Tony

    Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
    PProHeadless
    You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

Maybe you are looking for

  • [Forum FAQ] Troubleshooting Network File Copy Slowness

    1. Introduction The Server Message Block (SMB) Protocol is a network file sharing protocol, and as implemented in Microsoft Windows is known as Microsoft SMB Protocol. The set of message packets that defines a particular version of the protocol is ca

  • Touchscreen - Does a utility to test or calibrate the touchscreen exist?

    See title. Even a simple program to draw a crosshair on the iPad screen where the computer thinks contact was made would be useful. Thanks, Don

  • Loop timeline in movieclip then gotandplay frame

    Hi all, I have an animation of a dog running across the stage and a movieclip called "legs" which is the legs moving. I want to loop the dogs legs for a certain amount of frames and then make it stop on a certain frame within that same nested "legs"

  • Filters from BW in HANA Calculation View

    Hi, Gurus! We start using HANA modeling and faced with some issues in filtering. Hope someone can help us, maybe anybody faced with same error and give us they expirience. Well, we have following model On this model we create Virtual Cube in BW. All

  • InDesign CC 2014 locking up (Mac OSX 10.9.5)

    I am trying to make changes on an owner's manual and after a brief amount of time, InDesign locks up. It shows a blank page no matter what page I'm on and when I finally give up and go to force quit (command-option-escape) the dialog does not list in