Best non mini dv video camera to import a football match to imovie 09?

sorry for the 2nd consecutive post, but to go with my previous problem, i am looking for a good cheapish solution to the following problem
currently the video camera i use to record the youth teams football matches is a panasonic NV G5S which requires firewire to transfer to imovie. my macbook is wonderful, but it doesnt have a firewire port. so what i have to do is import the video to my friends older mac, then transfer it to my mac . all very time consuming, around 4 hours for 1 match. also the quality is rather bad, so bad when analysing the game with the coach, we cant make out which player is which at times. therefor i am considering buying a new video camera which will import direct to my macbook without the need for a firewire cable. could someone recommend the best video camera for quaity which is compatable with the mac for around 200-300 pounds. also i dont mind upgrading to imovie 09 should this be a better application to import higher quality videos.
please help

Hello twrate,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iMovie '11: If iMovie doesn’t recognize your camcorder
http://support.apple.com/kb/PH2146
Best of luck,
Mario

Similar Messages

I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

Hello twrate,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iMovie '11: If iMovie doesn’t recognize your camcorder
http://support.apple.com/kb/PH2146
Best of luck,
Mario

Only CERTAIN videos will not import in BOTH versions of iMovie

Heya, I'm dying here, hoping someone can help:
I've been filming video with my camera, but for some reason, one out of every 6 or 7 times a file will absolutely not import into iMovie.
They play absolutely fine with audio and everything in Quicktime, but when I try to import to iMovie '08, they simply do not show up as thumbnails even though it goes through the whole "creating thumbnails" process.
When I try importing them into iMovie HD 6, I get a "file cannot be imported: unknown error" message.
Everything else I film with my camera and import into either version of iMovie works just fine! It's only certain ones... but it always happens to be the most important clips!
There's GOT to be some way to fix this, right?

Everything was filmed with the exact same settings.
Your argument here is "inductive" and does not confirm that all stored files are in fact in the same compression format and settings. You need to apply a "deductive" approach. As I implied and QT Kirk specifically stated, you need to actually examine the files to determine their internal specifications -- comparing the working with non-working files to look for differences.
I've tried Streamclip, but when I try to save it as an avi, mpeg, dv, or even a renamed mov file, it says "Error: Could not prepare clip"
If your are trying to use the "Save As..." option here, you are not, in fact, performing a "conversion" but rather merely attempting to place the same content in a different file container. MPEG Streamclip does not, for instance, have the ability to export non-MPEG2 content to MPEG (MPEG-2 'muxed" or elementary streams) which would be incompatible with iMovie '08 in any event. As to AVI, you mush have one of the required AVI QT components installed and the compression formats you are trying to place in the AVI container must be compatible with the AVI container which is itself compatible with iMovie '08 as long as its contents are already edit compatible. As to DV, this one one usually difficult to mess up unless you were trying to turn it into a transport stream.
today I tried taking the original quicktime MOV file from the camera (the one that plays just fine in quicktime AND streamclip, just won't convert or import)
This statement seems to imply that something is wrong with your attempted work flow. If the file opens and plays in the QT Player and MPEG Streamclip, then it should be convertible. Once again, the primary problem is determining how to best perform this conversion which is why Karsten, QT Kirk, and I need specific information regarding the actual compression format, whether or not the compression settings were compatible with the QT structure, and whether or not an extraneous track (e.g., a "Tweener") might be causing difficulties. Posting a screen capture of the "Inspector" and/or "Properties" window or a sample file should provide the needed information.

What is best type of 'new' video camera to buy for editing with PE 10?

I currently own two Sony miniDV camcorders (models DCR-HC28 and HC40) and was doing fine in Premiere Elements and recently upgraded to version 10. I was in the process of using the HC40 cam as a 'pass-through' device to digitize some old VHS tapes, and it worked well for copying from VHS to miniDV tape. Then, I could capture in Premiere Elements and edit, etc. (It would never work to pass all the way through to capture in PE in one step using Firewire). Now, the HC40 camera has locked up on me halfway through my box of VHS tapes, and is stuck showing the Time/Date screen and the touch screen seems to be disabled. What to do?
There do exist plenty of used DCR-HC40 and 52s (which also support pass-through) on Amazon for sale in the $200 range, and that is one option. I also went to Best Buys this week and looked at all the new Sony video cameras, and they fell into basically two series: the DCR-SX series, which record in standard definition onto flash memory (SD cards), and the more expensive HDR-CX series, which record in Hi Definition (also on SD cards) but also, I was told, can record in standard definition. The miniDV camcorders are no more, apparently. I am not so enamored of HD recording that I would go whole hog for it, as I am happy with the results I have been getting with my miniDV cameras once burned to DVD or converted to MPEG or MP4 for playing on my iPhone, etc. Plus, HD takes up so much more memory and space on the hard drive compared to standard def files.
I called Sony tech services today to find out that none of the new cameras support the pass-through function for digitizing from old VHS cassettes, so I am looking at buying a VHS-digitizing device as recommended here on the forum such as the ADS Pyro AV Link or Grass Valley ADVC110. Since I would rather spend that money on a new video camera instead of merely the AV link device which I will have no use for once the tapes are digitized, my question comes back to the cameras. Which of the new cameras will be most ideal for editing in PE10 going forward, or is it best to stick with miniDV for now?
Steve G has always seemed to point out that miniDV tape and the ensuing AVI files are the best for PE to work with. Sony told me today that even the SD cameras such as the DCR-SX65SD ($219) now record onto the SD cards in MPEG2 format, and that AVI is a thing of the past that died with the miniDV tapes. I assume MPEG2 still comes out as different clips that one assembles on the Timeline in PE10? One probably could convert the MPEG2 files to AVI, but would that give the same quality as an original AVI file from a miniDV tape? And if MPEG2 is the new standard going forward, do the resulting videos made with PE10 have the same quality as those made from 'native' AVI files? I will buy a used DCR-HC40 miniDV camera if the end result is better than those to be obtained with the brand new DCR or HDR series cameras now available in stores. But if the quality is the same, I could perhaps opt for one such as the HDR-CX 130HD ($349) which also records in SD in case some years from now I decide I really DO want to switch to HD formats.
Any advice on choice/use of the newer cameras and their default formats such as MPEG2 is welcome, in relation to PE10 editing and output capabilities.
Thanks very much,   paultool3

Dear JM and Steve,
Thanks much for your replies. I plan to get my DCR-HC40 miniDV camera fixed so I can use it for pass-through digitizing from VHS tapes. I also recently bought one of the Dazzle Video Creator Platinum capture units ($84 at Best Buys) just to try it, and actually got pretty good results in digitizing a VHS-C tape using a VHS-C to VHS adapter unit to play it in our VCR, and then using the Pinnacle Studio HD (version 15) that came with the Dazzle unit to import and digitize through the Dazzle unit.
The Dazzle unit would not show up in Premiere Elements 10 as an option to capture from, but did in Pinnacle Studio 15.   I used our Sony VAIO with i7 processor and Pinnacle captured the one hour, twenty-five minute- long VHS-C tape to a single 18GB .AVI clip which I then was able to bring into Premiere Elements 10 and use for output in various formats.
When using a less powerful laptop initially, the digitizing failed, with 319 dropped frames in the first 5 minutes.. So it takes a more powerful computer to work with a capture unit like Dazzle, apparently.
I will eventually be shopping around for a new, AVCHD format video camera as well based on your recommendations, but the current group of Sonys in this category, such as the HDR-CX130HD ($349) which record video onto SD cards, are getting bad reviews from CNET, claiming they have poor quality HD and other issues. So for the forseeable future I will be sticking with miniDV using my Sony DCR-HC28 and HC40 camcorders.

Best low cost HD video camera for holiday!

I currently shot on Sony EXR1 and back up cameras 2 x Sony Z1's but dont want to take either of these on vacation, to flaming big!
Anyone out in FCP land got a suggestion for a flash card/small video camera (HD) to take on my holidays?
I was looking at the Flip Mino HD Camcorder or even the Sony HDR-XR100 80GB AVCHD HDD Camcorder.

Hi
If You won on the lottery.
Google RED Cameras
astronomical costs - but that's what some pros use
nice to see then at least - no cost to view
Yours Bengt W

Can I use a USB camera to import directly live footage into imovie as opposed to firewire?

Hi!
I use iMovie to directly import live footage from my camcorder.
I've been using old Mini DV cameras to do this but this technology is being outdated with camera manufacturers now all moving to USB.
Can I use a USB camera to take live footage directly into iMovie just the same was as i've been doing with the firewire connection via the old Mini DV camcorders.
Alternatively, are there any firewire camera's that any could reccomend?
Any help or suggestions would be greatly appreciated.
Chris.

No, you cannot import in real time from USB. These USB camcorders will import faster than real time or slower than real time, depending on the speed of your computer.
If you need to import in real time, there are some USB webcams out there that are used mainly for video chats and the like that might work. You may find an HD model.You can also do this with your built in iSight camera.
With a real HD video camcorder, you will need to import it after you shoot.

Mini DV video cameras

How can videocamras with DV minitapes be used with iMac and iMovie11

These work great with iMovie.
The camera must be plugged in to AC power (not batteries only).
Attach a Firewire Cable. Turn the camera to play. iMovie import screen will appear, and you can import.
For the cable, if your iMac has Firewire 800, get a 4 pin to 9 pin Firewire Cable.
If your iMac is one of the older models with Firewire 400, get a 4 pin to 6 pin Firewire Cable.

Aluminium macbook to sony pc5e (dv video camera) connectivity

Hi, hope someone may be able to help. I have an old sony pc5e mini dv video camera and would like to connect it to my aluminium mac to download some content. Is this compatible and if so, what would I need in terms of cables and software etc. I would assume that unless a firewire input is available then it won't work? Any assistance would be greatly appreciated. Thanks very much.

I had similar problem. Bought new HDR-HC9 camera. Took tape from older mini dv camera, and recorded some test footage. Created new imovie project, and the portion of the tape recorded in hi def comes over fine, the portion of the tape recorded in standard (on the old camcorder) all I saw was the blue screen.
I also tried playing and importing some tapes that were recorded entirely on the old camera (no mix of hi def and standard on the same tape) and had the same result: iMovie saw camera, would control rev and play, video would play on camera but iMovie has blue screen.
I tried the iLink setting from the camera playback menu (HD->DV conversion) with no luck. I made sure my iMovie project was appropriate for the recorded mode (DV widescreen) with no luck. Then I happened on the solution. Go to the camera settings in video camera mode, change the recording mode from Hi Def to standard DV. At this point all the tapes recorded in standard mode (DV widescreen) from the old camera can be imported into iMovie6 just fine. I know this sounds weird, since the record mode should not effect playback (?) but it works none the less.
I have not yet experimented with importing hiDef footage with camera in standard record mode, but I expect that if there are problems, that making sure the record mode on the camera is synced with the type of footage you are playing into iMovie is the solution.
Hope this helps.

How do I save a dvd (with video from a video camera) to edit with imovie?

A friend took videos of an event of mine with his video camera. He then put the clips on a dvd and gave it to me. It was recorded on with a Sony video camera and imported on to a pc with vega's then burned with DVD Complete. He was not sure what format he put it in but maybe something like video_TS.BUP. When I open it up from my desktop it has a audio TS and Video TS folder. When I try to open one of the video folders it goes to iphoto and says unrecognizable format. So does he need to save it to different format and what format would that be. I want to put those clips on my mac to edit to make a movie. I have the newest macbook with the newest imovie. Thanks for all your help!

DVDs are encoded into MPEG2, which iMovie cannot edit. So you need to convert the DVD back to something else. For highest quality, I recommend that you convert the DVD to Apple Intermediate Codec. There is a free tool called MPEG Streamclip that will do this. You will also need to install the Apple QuickTIme MPEG2 Playback Component.
Here are the details.
1) Download and install the Apple MPEG2 QuickTime Component ($20) - available online from Apple.
2) Download and install MPEG Streamclip from Squared 5 (free).
3) Start MPEG Streamclip
4) Insert your DVD into your Mac. If DVD Player or Front Row starts automatically quit those.
5) Open a Finder window. Navigate to your DVD to the Video_TS folder.
6) Drag the .VOB files from the Video_TS folder and drop then into MPEG Streamclip.
7) If MPEG Streamclip offers to fix timecode breaks, say yes.
8) Use FILE/EXPORT TO QUICKTIME to convert the files to Apple Intermediate Codec (or h.264 if you prefer)
9a) Optional: You can deinterlace your footage in this step, if you like
9b) optional: If you know the date and or time of the footage, name your file
clip-yyyy-mm-dd hh;mm;ss
(let mpeg streamclip provide the extension). This will provide metadata that iMovie will use to put the event in the right year and month.
9c) Optional: If you don't want to make one huge clip out of your DVD, you can make smaller clips by using MPEG Streamclip. Move the cursor to the "in" point of the clip, and press i. Move the cursor to the "Out" point of the clip, and press o. Then do steps 8 through 10 and repeat until you have done this for all clips you want.
10) Save the resulting file in a place where you can find it, like your Desktop.
11) Open iMovie.
12) In iMovie, choose FILE/IMPORT/From File and choose the file you saved in steps 8, 9, 10.
13) iMovie will generate thumbnails and you can edit.

Video camera that will work with imovie

I've been asked to look into getting a video camera for work. Mostly to do interviews and product demonstration. I can see the potential for more. I did borrow a Mini DVD video camera last year. Had to jump through 2 hoops and save 2 different ways in order to just finally view the stuff on the computer. Never mind edit it. I don't seem to be alone with these problems of video camera/mac compatibility. Pain in the…
I'm looking to plug and play into my mac and hopefully use iMovie to edit.
What are some of the best choices under about a grand? Preferably $500?…
Thanks for you expertise!

If you want high definition, pick a camcorder off this [list of supported camcorders|http://support.apple.com/kb/HT1014] for iMovie 08. There is a slightly different list for iMovie 09. Pick an AVCHD model in either SDHC card or hard drive format. DVD camcorders are not recommended (by me) because people have too much trouble with them.
If standard definition is good enough, any miniDV camcorder will do.
Message was edited by: AppleMan1958

H264 and HD video camera questions

So I just got a miniDV HD video camera and was learning how to use imovie 06 HD. So much more confusing then 08. I got really spoiled with just clicking, dragging and deleting parts of clips I didnt want, this seems much more complicated.
Question is, once I finish a project, how do I use this H264 to compress the HD video? I didnt see an option for it when I clicked "Share" and then selected Quicktime. I just upgraded to QT 7.4.5 for Leopard. Any help would be great, thanks

Nevermind, just found the option. Is it supposed to take like 15 min to render a 30 second clip? Thats ridiculous.

Compatible video camera with imovie

Does anyone know what video camera are or are not compatible with imovie. I looking at purchases a new Sony HDD(hard drive) video recorder but read that some are not compatible with imovie. I have a mac book.

iMovie 7 allows over 100 more camera file formats and connections than any previous version.
Most hard drive storage cameras record to MPEG-2 format which is now supported in version 7.

Cannon HD Video Camera's

Hi,
Has anyone used the Cannon Vixia HF S100 or HG20 HD video cameras? Are they compatible with with imovie 09 that I am using with my Imac? I shoot mostly digital stills, but would like to start getting into video as well.
Thanks for the help.

I have decided to go with the HFS100. I tried a test video at the computer store and imovie 09 worked perfect with this camera. The picture looked great on the 24" Imac that they had at at the store.
Thanks for the reply.

Ideal non mini dv camera to record football matches to import to imovie 08?

sorry for the 2nd consecutive post, but to go with my previous problem, i am looking for a good cheapish solution to the following problem
currently the video camera i use to record the youth teams football matches is a panasonic NV G5S which requires firewire to transfer to imovie. my macbook is wonderful, but it doesnt have a firewire port. so what i have to do is import the video to my friends older mac, then transfer it to my mac . all very time consuming, around 4 hours for 1 match. also the quality is rather bad, so bad when analysing the game with the coach, we cant make out which player is which at times. therefor i am considering buying a new video camera which will import direct to my macbook without the need for a firewire cable. could someone recommend the best video camera for quaity which is compatable with the mac for around 200-300 pounds. also i dont mind upgrading to imovie 09 should this be a better application to import higher quality videos.
please help
the quality of my video footage when i import from mini dv direct to imovie then tr

Do you have a DVD Recorder (or have access to one)? If so, plug the camcorder into the appropriate port and record a DVD directly, with no need to use a computer, unless you need to edit of course - although some recorders allow limited editing.
Some DVD Recorder models have a FireWire port (IEEE1394 or iLink or DV IN). Otherwise use the RCA connections - Yellow for video, Red and White for audio (although this is an analogue connection so will be of lesser quality). Your Sony would have come with the appropriate analogue cable - it has a mini jack on one end and the 3 RCA connectors on the other end.
Worth a try if all else fails!
John

Best camera for importing HD video files native to FCP?

I am researching what type of HD video camera to buy. The goal is to have video material captured to a memory card or stick and have the resultant video files available for direct import into FCP. I have used rented cameras in the past where I had to go through a convoluted process of importing the video material into iMovie, and then exporting the material from that application, so that the video files were usable by FCP.
Any info on how to judge whether a camera will create files that can be imported directly would be very helpful. I have read, for example, that if the camera creates AVCHD files, you can't edit natively in FCP. I am looking for a camera that is relatively portable, and has image quality one notch below pro standards (to keep cost under $1,500 I hope.) Thank you in advance.

Hi again, Guys.
In this discussion, the consensus was that the Panasonic HMC-40 was a good choice at a modest price for shooting HD material that would be cut on FCP 7. Sadly, I neglected to say, when I started the discussion, that ideally I need to shoot both in the US and the UK. i.e. at 60 Hz and at 50 Hz respectively. When I researched the Panasonic HMC-40 I was told that it could not switch between 60 and 50 Hz. But that the next camera up COULD switch. That camera is the AG HMC 151 E. I was told this by a Panasonic rep in the UK. But the problem is that I would like to puchase the camera in the US. The US model is the AG HMC 150. And that model it seems DOESN'T switch between 60 and 50 Hz. It only shoots 60. (Why Panasonic has done this is a mystery to me.)
On a tech discussion group about HD shooting, one person said that the problem with shooting 60 Hz in the UK is mainly lighting, e.g. if you are shooting with florescent light in the UK, you might get flicker if you use a 60Hz camera in the UK. So my questions are:
1) If I am shooting in the UK with a 60 Hz camera (i.e. a camera I have purchsed in the US that is not switchable) what are the biggest problems?
Is it only if I were shooting in florescent light, or is the quality overall a big problem.
2) If I shoot 60 Hz but am shooting in the UK, can I use FCP to convert the 60 Hz materail to 50 Hz and will that solve any image problems?
3) Now that I have mentioned that I would like to be able to shoot in the UK and US with the same camera, but that I want to buy the camera in the US, does anyone have another recommendation of a camera that is in the $2,000. range that would serve this purpose and still create files that would work well in FCP 7?
Do Sony or Canon address this switchable 60/50 Hz issue more effectively than Panasonic? In the earlier discussion, it was noted that Panasonic cameras created files that were easiest to use with FCP.
I am sure I have said things here that reveal how unknowledgeable I am about shooting HD. But this will be my first camera purchase after having been an editor for over 10 years. Any advice most welcome, and thanks in advance.

Best non mini dv video camera to import a football match to imovie 09?

Similar Messages

Maybe you are looking for