Best place for abap

what is the best place for abap searching

hi
good
abap searching means?
if you r talking about URL than it is
www.sapgenie.com
www.abap4u.com
if you r talking about TCode than it is
ABAPDOCU.
thanks
mrutyun^

Similar Messages

The best place for content server

Hello,
We need to install content Server . SAP ECC is in Paris .
The users who will use the content server will be in New-York.
Is the best place for content server in Paris or in New-York?
The question could be : Will a document (for ex. a pdf of 100 Mb) to be checked_in the CS be first transferred from frontend to ECC and then from ECC to CS or directly from frontend to content server ?
Thanks

Hi Oda,
If your users are in New-York, then better to have content server there to optimize network traffic and speed. There is something called as distributed content server concept where you can have different storage areas for different geographical locations.
And as far as i know, whenever files are checked-in, they are directly stored in content server and it will not route through the ECC. Only DIR stored in the ECC will be linked to the file in the content server.
Hope this helps.
Regards,
Ravi

Where is the best place for suggestiong requesting features?

Where is the best place for suggesting/requesting features?
If something like this already exists, please let me know.
I often wish when I select a word to right click and choose dictionary to to find out the meaning of the word. Currently I have to copy, go to a dictionary web page, paste and search. And I spent a lot of time for that. I'm not that technically oriented to suggest how this can be achieved but just as an idea, may be Mozilla can partner with dictionary web sites by making a plug ins or include a dictionary with Firefox itself

I am sure there are Extensions that do this.
DictionarySearch - https://addons.mozilla.org/en-US/firefox/addon/68/
Add-on search for Dictionary - https://addons.mozilla.org/en-US/firefox/search/?q=dictionary&cat=all&lver=any&pid=1&sort=&pp=20&lup=&advanced=
Feedback - http://hendrix.mozilla.org/

Best place for CUA

We've got ECC, BW, XI, EP, SolutionManager installed and want to implement CUA.
I want to know your comment on:
One CUA or more CUAs, we have 3 systems (DEV, QAS, PRD) landscape for each system.
*Where is the best place for CUA?
TIA.

Hi Team FI,
There are other factors that may be considered when deciding where to put CUA. For example:
Are you using Indirect Assignment of roles also? If so, then simplicity would say, put the CUA on the same system as the HR module (saves having to ALE over the PD object -> Role relationships to different CUA system).
High availability - normally your ECC system would have the highest availability due to the critical nature and impact on business, so it would make sense to put it on your ECC system if this is the leading factor.
What is your role integration strategy like? I know some clients that have excellent integration across all systems such that a 'role' is defined as all of the access that you require inclusive of all SAP systems, and LDAPs. If this is the case, then you can have a single CUA system. Assign ONE composite role to the user, which then provisions out single roles to all of the other SAP systems (including non-prod) and synchronises with your LDAP. If your role integration is not as 'good' as this, then you may consider having two CUA systems. One for the prod systems, and the other for the non-prod systems.

Best place for LR catalog (.lrcat) file?

I'm putting together a new PC running Vista and am trying to figure out the best place for the LR catalog (lrcat) file. This PC has multiple hard drives as follows:
C: OS and apps
D: non-photo files (docs, mp3s, etc)
E: photo files
F: video files
All the drives are comparable in read/write speed. The Lightroom app will be installed on the C: drive, and the LR catalog will consist of the images on the E: drive. While working in LR, I sometimes listen to mp3s stored on the D: drive. I'm assuming that the best place for the lrcat file is the F: drive (since I seldom access that drive while working in LR). Does this make sense? Or should the lrcat file go somewhere else?
On a side note, on my last PC, I had the lrcat file in what was originally a dedicated scratch drive (for PS), but I'm doing less and less in Photoshop these days, and my new system will have 12GB of ram, so I decided to do without a dedicated scratch drive for the new system.
Any advise appreciated.

Asking yourself the following questions may help determine which drive is best suited for storing the Lightroom Catalog:
1) Are you the only person using the "Lightroom computer"?
2) Do you have multiple log on accounts?
3) Do multiple log on accounts need access to the Lightroom Catalog?
If you answer yes to #1, its default location might be fine. If you answer yes to #2 or #3, you should concider a central location for the .lrcat file.
By default, the .lrcat file is located in a users document folder. This means that at least one (1) .lrcat file will be created per user account. Seeing that you usually keep photo files on the E Drive, creating a folder on the root of the E Drive might not be a bad idea. Using the root of E schema will then allow mutiple users to access the .lrcat file when they log on. Using the E Drive keeps "photo related" files together, thought Drive D or Drive F would also work. It appears from your description that you keep O/S and Applications only on the C Drive, which I do myself.
Hope that helps!

Best place for S60 v5 Applications?

I assume the best place for applications for my 5800 (or any other device) WILL BE the Ovi store.
But until it launches, where have we found to be the best place to get reliable apps?

have a look here there is lots of great apps here free and themes and games enjoy
http://dailymobile.se/
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Best place for the sub.

Hi,
I have a 2.1 speaker system (I-trigue 3400) and was wondering if anybody knows the best place to put the sub so you can hear the deep bass more, it is infront of my legs now, and when i bend down i can hear more, but when i put it above my head i cant hear it again.

To find the best place for a sub is quite complicated. The distance from walls, corners and other objects makes a huge difference. One way is to place the sub where you will be sitting; put it as close to where your head will be as you can. Then play some music with nice deep bass and crawl around the floor. You should notice that there are areas where the bass is louder, these are the best spots to place the sub.

Best place for DSL wireless router to aquire strongest signal

Hi all
I have a Westell DSL wireless router sitting on a Kensington surge protection base with antennas pointing straight up. Is this ok? My wireless internet connection is ok for now. What's the best place for my wireless router for the strongest possible signal?
Thanks for your help
Web dude

Place it clear of HVAC ducting and away from any microwave or cordless phone base stations(s) in the house - these are the primary causes of wifi interference/noise and signal outages. Consider the area you want to cover (including any outdoor areas) and place the unit as near the center as possible.
Download a copy of AP Grapher and observe the signal quality in your intended reception area(s) to help place the router optimally for best signal and lowest noise, including rotating the antennas if needed - vertical is perfectly OK, but you may get marginally better signal or lower noise by rotating them.
AP Grapher can be downloaded from http://www.chimoosoft.com/products/apgrapher/

My daughter is a college student. she needs to write and compile c programs on her mac for a class this semester. what is the best place for her to start to get the correct compiler etc. to use ? thanks

my daughter is a college student. she needs to write and compile c programs on her mac for a class this semester. what is the best place for her to start to get the correct compiler etc. to use ? thanks

If you know that you will not be asked to design GUI interfaces, and the C programming course will adhere to command line compilation environments, then get the Xcode command-line developer tools, and skip the extra complication of Xcode until you absolutely need it. Apple has kicked GNU C to the curb and is rightly so, using Clang/LLVM compiler technology.
Sign up for a free Apple Developer account using your Apple ID, and then visit the Mac Dev Center, and towards the bottom of the page, you will see additional downloads. Click on the associated, all down loads link. Know your OS X version beforehand, as the command-line tool releases are tied to general operating system versions, and the most recent Xcode version. That said, there are currently two March 9, 2015 command-line tools for Xcode 6.2 — one for OS X 10.9 Mavericks, and the other for OS X Yosemite.

Best place for spare parts for PPC 1.5 Mini?

Hi.
I'm looking for the best place to get spare parts for a Mac Mini PPC G4 1.5GHz on the net. The fan is most likely giving up, because it has recently begun to sound as the bearings in the fan are bad.
Regards,
/Mysteron

Hi Mysteron-
I've used these folks for other projects: MAC-PRO
If you don't see what you need or have questions try giving them a call as they are very helpful.
Luck-
-DP

Best place for scratch files, imported video on laptop with single drive

Hi all,
I read that is was best to put the scratch files on a disk other than that the program resides on, so I did. That makes sense.
But later, when I was reading about people's problems with CS4 crashing, I read I'm not meant to be using USB drives .... so, my question is:
On a laptop with a single hard disk and a USB external drive, where is the best place? Do the performance problems with scratch files on a single disk trump those of using USB or vice versa.
Perhaps its something I'll have to try myself but wondering about other people's experience.
Cheers

I'm with Harm on the eSATA. I will say that FW-800 works for me, but as more of my externals offer eSATA now, I'll probably migrate to that connection very soon. Even with 3x 200GB 7200RPM SATA II HDD's on my laptop, I do a lot of work with externals, 'cause I migrate the Projects to my workstation. Just remember to set a unique drive letter for the external(s) in the OS of all computers, or you WILL have issues. An eSATA card is cheap, though your externals need to have the connection. Externals are also cheaper now. I'm paying the same for 2TB units, that I paid for 250GB ones, when they first came out! For what I paid for a 1.5TB RAID NAS, I could now get 16TB in a hot-swappable enclosure.
As for USB's, I tried that years ago, and gave up in frustration. The connection was just too slow, and often timed out, or worse. I'd not do that again, on a bet - sorry, but I am too impatient and then there were the crashes...
Hunt

Best place for Contacts

What have people found is the best place to use as their master contact list? I use Outlook 2010 with gSyncit for Gmail. I really don't care about having my Facebook contacts in my Droid since I don't use Facebook that much. I've turned that out. Is Outlook the best place and let gSyncit push them up to Gmail which will sync them with my Droid? Just looking for others experience.

I have noticed a lot of droid users using this particular method.

Best place for RAM?

Hi guys I was wondering where the best place to buy 2x 2gb ram sticks for my new mac book pro. I have seen some sites and was wondering why it was so cheap. Like I say some for 45 dollars. Thank you in advance for your time.

*Other World Computing:* _http://www.macsales.com_
I have purchased RAM from them for four different Macs and it always been cheap and performed flawlessly. You can get 2x2GB for less than a hundred dollars -- I just did it last week.

Best Place for Upgrade Memory

Where is the best place to get iMac memory upgrades? The cheapest place? I'm looking for high quality product as well (4GB upgrade)
Thanks!

Kenichi's advice is spot-on. I buy Mac RAM from only two vendors, the one he links and Data Memory Systems.
However, if your Mac can take 4GB RAM, it's not the model covered in this forum area. It's poorly labeled and misleads lots of people. This forum addresses the G4 iMacs with the articluated display arm and the white domed base.
It sounds like you have an Intel-based iMac. Their forum is here:
http://discussions.apple.com/category.jspa?categoryID=189
I've never had a problem with RAM bought from either vendor, and their prices are as sharp and anyone's. Very good customer service.

Best Place for FCS2 Content

Good morning.
I'm wondering if any might be able to advise me on the best place to keep the content files for Soundtrack, Motion, LiveType and DVDPro. Should they be on the same drive as the programs or on an external drive? If on an external drive, is a USB drive sufficient or should I keep them on the same FW drive where I store my other media?
Thanks for your thoughts.
Cheers,
John

There is one situation where installing the content on your system disk would reduce performance, and that's if the content takes up most of the remaining space on the drive. Best not to fill it past 80% capacity.
Other than that situation, I don't think you will notice a difference. I personally keep mine on the system disk.

Best place for abap

Similar Messages

Maybe you are looking for