Best practice about dial-peer creating when using analog lines

Hi,
I am trying to find out what is the best practice when creating dial-peer for analog lines on CME, should I use trunk group or create separate dial-peer for each FXO ports? If I use trunk group, is there any advantage ( lesser dial-peer) or disadvantage?
Thanks!

The advantage of trunk groups is that a single dial peer can point to for instance PSTN, rather then multiple dialpeers, with varying preference, each pointing to a separate FXO. Funtionally I can't see much difference. So I guess it also comes down to personal preference.
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================

Similar Messages

Best practices for ZFS file systems when using live upgrade?

I would like feedback on how to layout the ZFS file system to deal with files that are constantly changing during the Live Upgrade process. For the rest of this post, lets assume I am building a very active FreeRadius server with log files that are constantly updating and must be preserved in any boot environment during the LU process.
Here is the ZFS layout I have come up with (swap, home, etc omitted):
NAME                                USED AVAIL REFER MOUNTPOINT
rpool                              11.0G 52.0G    94K /rpool
rpool/ROOT                         4.80G 52.0G    18K legacy
rpool/ROOT/boot1                   4.80G 52.0G 4.28G /
rpool/ROOT/boot1/zones-root         534M 52.0G    20K /zones-root
rpool/ROOT/boot1/zones-root/zone1   534M 52.0G   534M /zones-root/zone1
rpool/zone-data                      37K 52.0G    19K /zones-data
rpool/zone-data/zone1-runtime        18K 52.0G    18K /zones-data/zone1-runtimeThere are 2 key components here:
1) The ROOT file system - This stores the / file systems of the local and global zones.
2) The zone-data file system - This stores the data that will be changing within the local zones.
Here is the configuration for the zone itself:
<zone name="zone1" zonepath="/zones-root/zone1" autoboot="true" bootargs="-m verbose">
<inherited-pkg-dir directory="/lib"/>
<inherited-pkg-dir directory="/platform"/>
<inherited-pkg-dir directory="/sbin"/>
<inherited-pkg-dir directory="/usr"/>
<filesystem special="/zones-data/zone1-runtime" directory="/runtime" type="lofs"/>
<network address="192.168.0.1" physical="e1000g0"/>
</zone>The key components here are:
1) The local zone / is shared in the same file system as global zone /
2) The /runtime file system in the local zone is stored outside of the global rpool/ROOT file system in order to maintain data that changes across the live upgrade boot environments.
The system (local and global zone) will operate like this:
The global zone is used to manage zones only.
Application software that has constantly changing data will be installed in the /runtime directory within the local zone. For example, FreeRadius will be installed in: /runtime/freeradius
During a live upgrade the / file system in both the local and global zones will get updated, while /runtime is mounted untouched in whatever boot environment that is loaded.
Does this make sense? Is there a better way to accomplish what I am looking for? This this setup going to cause any problems?
What I would really like is to not have to worry about any of this and just install the application software where ever the software supplier sets it defaults to. It would be great if this system somehow magically knows to leave my changing data alone across boot environments.
Thanks in advance for your feedback!
--Jason

Hello "jemurray".
Have you read this document? (page 198)
http://docs.sun.com/app/docs/doc/820-7013?l=en
Then the solution is:
01.- Create an alternate boot enviroment
a.- In a new rpool
b.- In the same rpool
02.- Upgrade this new enviroment
03.- Then I've seen that you have the "radious-zone" in a sparse zone (it's that right??) so, when you update the alternate boot enviroment you will (at the same time) upgrading the "radious-zone".
This maybe sound easy but you should be carefull, please try this in a development enviroment
Good luck

Best practice to monitor 10gR3 OSB performance using JMX API?

Hi guys,
I need some advice on the best practice to monitor 10gR3 OSB performance using JMX API.
Jus to show I have done my home work, I managed to get the JMX sample code from
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/jmx_monitoring/example.html#wp1109828
working.
The following is the list of options I am think about:
* Set up: I have a cluster of one 1 admin server with 2 managed servers, which managed server runs an instance of OSB
* What I try to achieve:
- use JMX API to collect OSB stats data periodically as in sample code above then save data as a record to a
     database table
Options/ideas:
1. Simplest approach: Run the modified version of JMX sample on the Admin Server to save stats data to database
regularly. I can't see problems with this one ...
2. Use WLI to schedule the Task of collecting stats data regularly. May be overkill if option 1 above is good for production
3. Deploy a simple web app on Admin Server, say a simple servlet that displays a simple page to start/stop and configure
data collection interval for the timer
What approach would you experts recommend?
BTW, the caveats os using JMX in http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/jmx_monitoring/concepts.html#wp1095673
says
     Oracle strongly discourages using this API in a concurrent manner with more than one thread or process. This is because a reset performed in
     one thread or process is not visible to another threads or processes. This caveat also applies to resets performed from the Monitoring Dashboard of
     the Oracle Service Bus Console, as such resets are not visible to this API.
Under what scenario would I be breaking this rule? I am a little worried about its statement
     discourages using this API in a concurrent manner with more than one thread or process
Thanks in advance,
Sam

Hi Manoj,
Thanks for getting back. I am afraid configuring aggregation interval from Dashboard doesn't solve problem as I need to collect stats data of endpoint URI or in hourly or daily basis, then output to CSV files so line graphs can be drawn for chosen applications.
Just for those who may be interested. It's not possible to use SQL to query database tables to extract OSB stats for a specified time period, say 9am - 5pm. I raised a support case already and the response I got back is 'No'.
That means using JMX API will be the way to go :)
Has anyone actually done this kind of OSB stats report and care to give some pointers?
I am thinking of using 7 or 1 days as the aggregation interval set in Dashboard of OSB admin console then collects stats data using JMX(as described in previous link) hourly using WebLogic Server JMX Timer Service as described in
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/jmxinst/timer.html instead of Java's Timer class.
Not sure if this is the best practice.
Thanks,
Regards,
Sam

What is the best practice in order to create flow in a single maintenance plan?

Hi All,
What is the best practice in order to create flow in a single maintenance plan.
1st Check Database Integrity (Check DB)
2nd Rebuild Index
or
1st Rebuild Index
2nd Check Database Integrity (Check DB)
Grateful to your time and support. Regards, Shiva

Use the Maintenance Plan Wizard to create a maintenance plan:
"This topic describes how to create a single server or multiserver maintenance plan using the Maintenance Plan Wizard in SQL Server 2012. The Maintenance Plan Wizard creates a maintenance plan that Microsoft SQL Server Agent can run on a regular
basis. This allows you to perform various database administration tasks, including backups, database integrity checks, or database statistics updates, at specified intervals."
LINK: http://technet.microsoft.com/en-us/library/ms191002.aspx
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Question about the CSS behavior when using layer 3 sticky and sticky table

Hi everyone,
I have a question about the CSS behavior when using layer 3 sticky and sticky table is full.
If I configure layer 3 sticky and specify the inactivity timeout as below, how does the CSS
handle subsequent needed sticky requests ?
advanced-balance sticky-srcip
sticky-inact-timeout 30
CSS document says that
Note:
If you use the sticky-inact-timeout command to specify the inactivity timeout
period on a sticky connection, when the sticky table becomes full and none of
the entries have expired from the sticky table, the CSS rejects subsequent
needed sticky requests.
My question is what is the next reaction by doing the CSS if the CSS is in the
following condition:
when the sticky table becomes full and none of the entries have expired from
the sticky table, the CSS rejects subsequent needed sticky requests
Does CSS just rejects/drops subsequent needed sticky requests ?
or
Does CSS does not stick subsequence requests to particular service but CSS forward
subsequence requests with round-robin basis ? which means if the sticky table is full,
the CSS just works round-robin load balancing fashion for subsequence requests ?
Your information would be appreciated.
Best regards,

Hello,
There is a good document explaining this on Cisco web site
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note09186a0080094b4b.shtml
It depends if the sticky-inact-timeout is used or not. If not, it's FIFO (the oldest entry in the sticky table is removed). If yes, the CSS will reject the next sticky request.
Rgds,
Gaetan
Rgds
Gaetan

What are the .fm.sp files that are created when using SharePoint?

What are the .fm.sp files that are created when using SharePoint? When I'm working with SharePoint, I've noticed that duplicate files ending in .fm.sp are created. I've been unable to find any reference or documentation about them so far.

Whe you use sharepoint as a CMS connections in Framemaker it creates the folder where Sp is installed and also a file ending .sp is created that let SP know that its the file associated with it.
.fm.sp indicates that its the framemaker type SP file.
Dont worry about it as its not creating any mess in the system.
Harpreet

Best practic about web document

Hi
I need a handbook (best practic) about web document.
can you help me?
thanks.

Hi Ignacio,
try this:
<a href="http://www.sapdesignguild.org/resources/htmlb_guidance/">http://www.sapdesignguild.org/resources/htmlb_guidance/</a>
and
<a href="http://help.sap.com/saphelp_erp2004/helpdata/en/4e/ac0b94c47c11d4ad320000e83539c3/frameset.htm">http://help.sap.com/saphelp_erp2004/helpdata/en/4e/ac0b94c47c11d4ad320000e83539c3/frameset.htm</a>
Regards,
Gianluca Barile

Is there any best practice about by-products

Dear all,
Is there any best practice about handleing by-products in production order?
Thanks!

Hi,
Have you searched the SCN forum, blog and wiki?
You may check this: http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=23593837
Thanks,
Gordon

Kernel: PANIC! -- best practice for backup and recovery when modifying system?

I installed NVidia drivers on my OL6.6 system at home and something went bad with one of the libraries. On reboot, the kernel would panic and I couldn't get back into the system to fix anything. I ended up re-installing the OS to recovery my system.
What would be some best practices for backing up the system when making a change and then recovering if this happens again?
Would LVM snapshots be a good option? Can I recovery a snapshot from a rescue boot?
EX: File system snapshots with LVM | Ars Technica -- scroll down to the section discussing LVM.
Any pointers to documentation would be welcome as well. I'm just not sure what to do to revert the kernel or the system when installing something goes bad like this.
Thanks for your attention.

There is often a common misconception: A snapshot is not a backup. A snapshot and the original it was taken from initially share the same data blocks. LVM snapshot is a general purpose solution which can be used, for example, to quickly create a snapshot prior to a system upgrade, then if you are satisfied with the result, you would delete the snapshot.
The advantage of a snapshot is that it can be used for a live filesystem or volume while changes are written to the snapshot volume. Hence it's called "copy on write (COW), or copy on change if you want. This is necessary for system integrity to have a consistent data status of all data at a certain point in time and to allow changes happening, for example to perform a filesystem backup. A snapshot is no substitute for a disaster recovery in case you loose your storage media. A snapshot only takes seconds, and initially does not copy or backup any data, unless data changes. It is therefore important to delete the snapshot if no longer required, in order to prevent duplication of data and restore file system performance.
LVM was never a great thing under Linux and can cause serious I/O performance bottlenecks. If snapshot or COW technology suits your purpose, I suggest you look into Btrfs, which is a modern filesystem built into the latest Oracle UEK kernel. Btrfs employs the idea of subvolumes and is much more efficient that LVM because it can operate on files or directories while LVM is doing the whole logical volume.
Keep in mind however, you cannot use LVM or Btrfs with the boot partition, because the Grub boot loader, which loads the Linux kernel, cannot deal with LVM or BTRFS before loading the Linux kernel (catch22).
I think the following is an interesting and fun to read introduction explaining basic concepts:
http://events.linuxfoundation.org/sites/events/files/slides/Btrfs_1.pdf

Best Practices for image layout and positioning using anchored frames in Framemaker 10

Hi,
I'm looking for the best practices in how to layout my images in Framemaker 10 so that they translate correctly to Robohelp 9. I currently have images inside of Anchored frames that "Run into" the right side of my text. I've adjusted the size of the anchored frame so that my text flows correctly around the image. Everything looks good in Framemaker! Yeah! The problem is that when I link my Framemaker document to Robohelp, the text does not flow around my image in the same manner. On a couple of Robohelp screens the image is running into the footer. I'm wondering if I should be using tables in Framemaker in order to get the page layout that I'm looking for. Also, I went back and forth...is this a Framemaker question or is this a Robohelp question. Any assistance would be greatly appreciated.

I wish I could offer some advice, rather than simply adding to your question. I think there is something odd that happens with anchored frames.
I have been going through fits trying to figure out why the placement of my graphics shifts when I run them through Frame 10-to-RoboHelp 9 conversion. The placement in our books is flush left to the body text area. However, when they convert, some are flush left, some are centered, and a very few are flush right. My boss is very unhappy with me, as I have been unable to figure out why this is happening. I didn't create these files, so I don't know if it's something that goes back to how the graphics were initially imported. But I can't figure out why everything looks right in Framemaker, with the frame attached to an anchor tag, etc. but the placement goes hinky when they convert.
Any insights are appreciated. I'm wondering if it's going to come down to deleting them and recreating the graphic frame.

Best practices about JTables.

Hi,
I'm programming in Java since 5 months ago. Now I'm developing an application that uses tables to present information from a database. This is my first time handling tables in Java. I've read Sun's Swing tutorial about JTable, and several information on other websites, but they limit to table's syntax and not in best practices.
So I decided what I think is a proper way to handle data from a table, but I'm not sure that is the best way.Let me tell you the general steps I'm going through:
1) I query employee data from Java DB (using EclipseLink JPA), and load it in an ArrayList.
2) I use this list to create the JTable, prior transformation to an Object[][] and feeding this into a custom TableModel.
3) From now on, if I need to search an object on the table, I search it on the list and then with the resulting index, I get it from the table. This is possible because I keep the same row order on the table and on the list.
4) If I need to insert an item on the table, I do it also on the list, and so forth if I'd need to remove or modify an element.
Is the technique I'm using a best practice? I'm not sure that having to keep synchronized the table with the list is the better way to handle this, but I don't know how I'd deal just with the table, for instance to efficiently search an item or to sort the table, without doing that first on a list.
Are there any best practices in dealing with tables?
Thank you!
Francisco.

Hi Joachim,
What I'm doing now is extending DefaultTableModel instead of implementing AbstractTableModel. This is to save implementing methods I don't need and because I inherit methods like addRow from DefaultTableModel. Let me paste the private class:
protected class MyTableModel extends DefaultTableModel {
        private Object[][] datos;
        public MyTableModel(Object[][] datos, Object[] nombreColumnas) {
            super(datos, nombreColumnas);
            this.datos = datos;
        @Override
        public boolean isCellEditable(int fila, int columna) {
            return false;
        @Override
        public Class getColumnClass(int col) {
            return getValueAt(0, col).getClass();
    }What you are suggesting me, if I well understood, is to register MyTableModel as a ListSelectionListener, so changes on the List will be observed by the table? In that case, if I add, change or remove an element from the list, I could add, change or remove that element from the table.
Another question: is it possible to only use the list to create the table, but then managing everything just with the table, without using a list?
Thanks.
Francisco.

Require official Oracle Best Practices about PSU patches

A customer complained about the following
Your company statements are not clear...
On your web page - http://www.oracle.com/security/critical-patch-update.html
The following is stated!
Critical Patch Update
Fixes for security vulnerabilities are released in quarterly Critical Patch Updates (CPU), on dates announced a year in advance and published on the Oracle Technology Network. The patches address significant security vulnerabilities and include other fixes that are prerequisites for the security fixes included in the CPU.
The major products patched are Oracle Database Server, Oracle Application Server, Oracle Enterprise Manager, Oracle Collaboration Suite, Oracle E-Business Suite, PeopleSoft Enterprise Tools, PeopleSoft CRM, JD Edwards EnterpriseOne, JD Edwards OneWorld XE, Oracle WebLogic Suite, Oracle Communications and Primavera Product Suite.
Oracle recommends that CPUs be the primary means of applying security fixes to all affected products as they are released more frequently than patch sets and new product releases.
BENEFITS
* Maximum Security—Vulnerabilities are addressed through the CPU in order of severity. This process ensures that the most critical security holes are patched first, resulting in a better security posture for the organization.
* Lower Administration Costs—Patch updates are cumulative for many Oracle products. This ensures that the application of the latest CPU resolves all previously addressed vulnerabilities.
* Simplified Patch Management—A fixed CPU schedule takes the guesswork out of patch management. The schedule is also designed to avoid typical "blackout dates" during which customers cannot typically alter their production environments.
PROGRAM FEATURES
* Cumulative versus one-off patches—The Oracle Database Server, Oracle Application Server, Oracle Enterprise Manager, Oracle Collaboration Suite, Oracle Communications Suite and Oracle WebLogic Suite patches are cumulative; each Critical Patch Update contains the security fixes from all previous Critical Patch Updates. In practical terms, the latest Critical Patch Update is the only one that needs to be applied if you are solely using these products, as it contains all required fixes. Fixes for other products, including Oracle E-Business Suite, PeopleSoft Enterprise Tools, PeopleSoft CRM, JD Edwards EnterpriseOne, and JD Edwards OneWorld XE are released as one-off patches, so it is necessary to refer to previous Critical Patch Update advisories to find all patches that may need to be applied.
* Prioritizing security fixes—Oracle fixes significant security vulnerabilities in severity order, regardless of who found the issue—whether the issue was found by a customer, a third party security researcher or by Oracle.
* Sequence of security fixes—Security vulnerabilities are first fixed in the current code line. This is the code being developed for a future major release of the product. The fixes are scheduled for inclusion in a future Critical Patch Update. However, fixes may be backported for inclusion in future patch sets or product releases that are released before their inclusion in a future Critical Patch Update.
* Communication policy for security fixes—Each Critical Patch Update includes an advisory. This advisory lists the products affected by the Critical Patch Update and contains a risk matrix for each affected product.
* Security alerts—Security alerts provide a notification designed to address a single bug or a small number of bugs. Security Alerts have been replaced by scheduled CPUs since January 2005. Unique or dangerous threats can still generate Security Alert email notifications through MetaLink and the Oracle Technology Network.
Nowhere in that statement is the Patch Set Update even mentioned. If Oracle intends to recommend to all customers that Patch Set Updates are the recommended means of Patching for Security and Functionality then it should be stated so here!
Please clarify!
Where can I find the current information so that I can use to Official Oracle statement as a reference for my Enterprise Practices and Standards document? The individual patch package references you are giving me do not state Oracle recommended Best Practice, they only speak to the specific patch package they describe. These do not help me in making an Enterprise statement of Practices and Standards.
I need to close the process out to capture a window of availability for Practices and Standards approval.
Do we have any Best Practice document about PSU patches available for customers?

cnawrati wrote:
A customer complained about the following
Your company statements are not clear...
On your web page - http://www.oracle.com/security/critical-patch-update.html
Who is the "your" to which you are referring?
<snip>
Nowhere in that statement is the Patch Set Update even mentioned. If Oracle intends to recommend to all customers that Patch Set Updates are the recommended means of Patching for Security and Functionality then it should be stated so here!Um. OK
Please clarify!
Of whom are you asking for a clarification?
Where can I find the current information so that I can use to Official Oracle statement as a reference for my Enterprise Practices and Standards document? The individual patch package references you Who is the "you" to which you refer?
are giving me do not state Oracle recommended Best Practice, they only speak to the specific patch package they describe. These do not help me in making an Enterprise statement of Practices and Standards.
I need to close the process out to capture a window of availability for Practices and Standards approval.
Be our guest.
Do we What do you mean "we", Kemosabi?
have any Best Practice document about PSU patches available for customers?This is a very confusing posting, but overall it looks like you are under the impression that this forum is some kind of channel for communicating back to Oracle Crop anything that happens to be on your mind about their corporate web site and/or policies and practices. Please be advised that this forum is simply a platform provided BY Oracle Corp as a peer operated user support group. No one here is responsible for anything on any Oracle web site. No one here is responsible for any content anywhere in the oracle.com domain, outside of their own personal posting on this forum. In other words, you can complain all you want about Oracle's policy, practice, and support, but "there's no one here but us chickens."

Best Practice for setting bind variable when application loads

I am using JDeveloper 11.1.2.3.
When my application loads, the first unbounded page has a table populated by a named query.
I would like to set the parameter used by the named query when the page loads, to populate the initial data that is displayed.
What is the best practice for a solution to this issue?

user6003393 wrote:
I am using JDeveloper 11.1.2.3.
When my application loads, the first unbounded page has a table populated by a named query.
I would like to set the parameter used by the named query when the page loads, to populate the initial data that is displayed.
What is the best practice for a solution to this issue?Hi,
You can set the bind variable on VO by overriding prepareSession() method in Application Module check this http://docs.oracle.com/cd/E37975_01/web.111240/e16182/bcservices.htm#sthref357
Setting bind variable on runtime http://docs.oracle.com/cd/E37975_01/web.111240/e16182/bcquerying.htm#CHDECJHD
Zeeshan

HTTP logs not created when using software load balancer

This is my setup:
1. I have a server running a software load balancer - call it A
2. There are two servers clustered under A - call it X and Y
3. I am able to access the application deployed on X and Y through A.
Fail-over also works. Shutting down X when the application is up and running routes the requests to Y and vice-versa. All is well until this point.
Problem is:
Let us take server X.
$ORACLE_HOME/Apache/Apache/logs does not have an access log in it. (It
however has an error log.)
Access logs are not created when accessing the servers in the cluster (X and Y) through the load balancer URL.
However, when accessing the individual servers in the cluster (with their URLs), access logs are created.
Specifics on the setup:
1. A, X, Y - all three are OAS 10.1.3.2
2. All three are deployed on individual server machines
3. All three servers have one OC4J instance each running in them
4. The software load balancer used is from WebLogic 8.1sp5 - basically to create a *.war file that has the details of X and Y (servers in the cluster)
5. This *.war file is deployed on A
6. Server A, the one that has the software load balancer, DOES NOT have AS control. One of the other servers in the cluster does.
Has anybody encountered this problem before? Or is there anything wrong
with the setup? What is the resolution for the same?
Any help is greatly appreciated.
Thank you.

Thank you, Jacco. You are right in saying that the software load balancer does not route the request to Apache and hence the logs are not created.
While the logs are not critical to the component we are working on, was just wondering why they were not being created.
As regards your comment on FastCGI, there is a FastCGI directory created under $ORACLE_HOME/Apache/Apache/logs - but there is nothing in it. Neither do the error logs have any information pertaining to FastCGI.
Anyway, I am not going to worry about this issue anymore - may be sometime in the future will try to use a different software load balancer and see if it makes any difference.

Only the last account is created when using this script in combination with a CSV

Hi, I've got a weird problem when using this script:
$Users = Import-Csv -Delimiter ";" -Path "......csv"
FOREACH ($User in $UserList) { $ User }
$OU = $User.path
$UPN = $User.UPN
$Password = $User.password
$Detailedname = $User.firstname + " " + $User.Lastname
$UserFirstname = $User.Firstname
$FirstLetterFirstname = $UserFirstname.substring(0,1)
$SAM = $User.UPN
$Company = $User.company
$Description = $User.description
$AccountExpirationDate = $User.accountexpirationdate
$params = @{ 'Name'=$Detailedname;
'SamAccountName'=$SAM;
'UserPrincipalName'=$SAM;
'DisplayName'=$Detailedname;
'GivenName'=$UserFirstname;
'Surname'=$User.Lastname;
'AccountPassword'=(ConvertTo-SecureString $Password -AsPlainText -Force);
'Enabled'=$True;
'PasswordNeverExpires'=$True;
'Path'=$OU;
'Company'=$Company;
'Description'=$Description;
'AccountExpirationDate'=$AccountExpirationDate }
New-ADUser @params
The CSV file has columns with the name: Lastname;Firstname;Password;Company;Description;UPN;path;AccountExpirationDate
Script runs without errors, but only creates the last line in the CSV file. Anyone that can help me, of put me in the right direction? Should be great!
Michiel
the Netherlands

Hi Michiel,
You'll need to move $params and New-ADUser up into the foreach loop.
EDIT: Also, remove the { $ User } that you have next to the foreach loop. You're also using $Users instead of $UserList.
EDIT2: Here's a cleaned up version:
$UserList = Import-Csv -Delimiter ";" -Path "......csv"
FOREACH ($User in $UserList) {
$OU = $User.path
$UPN = $User.UPN
$Password = $User.password
$Detailedname = $User.firstname + " " + $User.Lastname
$UserFirstname = $User.Firstname
$FirstLetterFirstname = $UserFirstname.substring(0,1)
$SAM = $User.UPN
$Company = $User.company
$Description = $User.description
$AccountExpirationDate = $User.accountexpirationdate
$params = @{ 'Name'=$Detailedname;
'SamAccountName'=$SAM;
'UserPrincipalName'=$SAM;
'DisplayName'=$Detailedname;
'GivenName'=$UserFirstname;
'Surname'=$User.Lastname;
'AccountPassword'=(ConvertTo-SecureString $Password -AsPlainText -Force);
'Enabled'=$True;
'PasswordNeverExpires'=$True;
'Path'=$OU;
'Company'=$Company;
'Description'=$Description;
'AccountExpirationDate'=$AccountExpirationDate
New-ADUser @params
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Best practice about dial-peer creating when using analog lines

Similar Messages

Maybe you are looking for