Best practice for putting together scenes in a Flash project?

Hi, I'm currently working on a flash project with the following characteristics:
using a PC
2048x1080 pixels
30 fps
One audio file that plays (once) continuously across the whole project
there are actions that relate to the audio, so the timing is important
at least 10 scenes
about 7 minutes long total
current intent is for it to be played in a modern theater as a surprise
What is the best practice for working on this project and then compiling it together?
Do it all in one project file?
Split the work into different project (xfl) files for each scene and then put it together when all the scenes are finalized?
Use one project file but create different "scenes" for each respective scene? I think this is the "classic" way (?).
Make the scenes "movie clips" and then insert them into the timeline with the audio as its own layer?
Other?
I'm currently working on it by having it all in one project file. But I've noticed that there's some lag (or it gets choppy) at certain parts during playback and the SWF history shows 3.1 MB with a yellow triangle with exclamation point symbol. Thanks in advance.

you would only do that if it makes your job easier. generally speaking, it would not.
when trying to sync sound and animation i think most authors find it easiest to use graphic symbols because you can see their animation when scrubbing the main timeline. with movieclips you only see their animation when testing.
however, if you're going to use actionscript to control some of your symbols, those symbols should be movieclips.

Similar Messages

Best practice for putting binary data on the NMR

Hi,
We're creating a component that will consume messages off the NMR, encode them, and subsequently put them back on the NMR. What's the best practice for sending binary data over the NMR?
1. setContent()?
2. addAttachment()?
3. setProperty()?
If NormailzedMessage.setContent() is the desired approach, then how can you accomplish that?
Thanks,
Bruce

setContent() is used only for XML messages. The recommended way to accommodate binary data is to use addAttachment().

Best Practice for Using Static Data in PDPs or Project Plan

Hi There,
I want to make custom reports using PDPs & Project Plan data.
What is the Best Practice for using "Static/Random Data" (which is not available in MS Project 2013 columns) in PDPs & MS Project 2013?
Should I add that data in Custom Field (in MS Project 2013) or make PDPs?
Thanks,
EPM Consultant
Noman Sohail

Hi Dale,
I have a Project Level custom field "Supervisor Name" that is used for Project Information.
For the purpose of viewing that "Project Level custom field Data" in
Project views , I have made Task Level custom field
"SupName" and used Formula:
[SupName] = [Supervisor Name]
That shows Supervisor Name in Schedule.aspx
============
Question: I want that Project Level custom field "Supervisor Name" in
My Work views (Tasks.aspx).
The field is enabled in Task.aspx BUT Data is not present / blank column.
How can I get the data in "My Work views" ?
Noman Sohail

Best practice for adding images to a RH8 HTML project?

I'm working on a Word to RH8 HTML conversion. The images in Word are SNAG images but the resolution is poor and some of the images may need to be recreated from scratch again. Going forward I imagine I should work on getting them right in Snagit9. Any suggestions?

For example, installation help topics dealing with install/uninstall screenshots for an application's client and server:
client_dir_sum.gif
client_dot_net.gif
client_uninst_wlcm.gif
server_wlcm.gif
server_cfg_tomcat.gif
server_success.gif
server_uninst_wlcm.gif
...or, screenshots dealing with an Accounts window:
acct_groups.gif
acct_lookup.gif
acct_lookup_btn.gif
acct_templates.gif
In other words, use cfg for configuration, dir for directory, btn for button, etc., and use either a function or application window as your lead, allowing you to see all related graphics in sequential order. If you've ever done any manual book indexing, think of this as Index entries/subentries, only the "entry" in file naming is your leading prefix (client_, acct_, etc.), and your subentries are the rest of each file name. Such as:
Accounts
configuring groups
using lookup feature
lookup button
templates
Use the same naming conventions for your topic file names as well; using this method eliminates the need for virtual folders. Many users on this forum use the folder structure, but editing/renaming/adding/deleting folders seems to very often create all sorts of grief. I find this naming structure to be less stressful.
Good luck,
Leon

Best practice for how to access a set of wsdl and xsd files

I've recently beeing poking around with the Oracle ESB, which requires a bunch of wsdl and xsd files from HOME/bpel/system/xmllib. What is the best practice for including these files in a BPEL project? It seems like a bad idea to copy all these files into every project that uses the ESB, especially if there are quite a few consumers of the bus. Is there a way I can reference this directory from the project so that the files can just stay in a common place for all the projects that use them?
Bret

Hi,
I created a project (JDeveloper) with local xsd-files and tried to delete and recreate them in the structure pane with references to a version on the application server. After reopening the project I deployed it successfully to the bpel server. The process is working fine, but in the structure pane there is no information about any of the xsds anymore and the payload in the variables there is an exception (problem building schema).
How does bpel know where to look for the xsd-files and how does the mapping still work?
This cannot be the way to do it correctly. Do I have a chance to rework an existing project or do I have to rebuild it from scratch in order to have all the references right?
Thanks for any clue.
Bette

Best Practice for storing PDF docs

My client has a number of PDF documents for handouts that go
with his consulting business. He wants logged in users to be able
to download the PDF docs for handouts at training. The question is,
what is the 'Best Practice' for storing/accessing these PDF files?
I'm using CF/MySQL to put everything else together and my
thought was to store the PDF files in the db. Except! there seems
to be a great deal of talk about BLOBs and storing files this way
being inefficient.
How do I make it so my client can use the admin tool to
upload the information about the files and the files themselves,
not store them in the db but still be able to find them when the
user want's to download them?

Storing documents outside the web root and using
<cfcontent> to push their contents to the users is the most
secure method.
Putting the documents in a subdirectory of the web root and
securing that directory with an Application.cfm will only protect
.cfm and .cfc files (as that's the only time that CF is involved in
the request). That is, unless you configure CF to handle every
request.
The virtual directory is no safer than putting the documents
in a subdirectory. The links to your documents are still going to
look like:
http://www.mysite.com/virtualdirectory/myfile.pdf
Users won't need to log in to access these documents.
<cfcontent> or configuring CF to handle every request
is the only way to ensure users have to log in before accessing
non-CF files. Unless you want to use web-server
authentication.

Best Practices For Household IOS's/Apple IDs

Greetings:
I've been searching support for best practices for sharing primarily apps, music and video among multple iOS's/Apple IDs. If there is a specific article please point me to it.
Here is my situation:
We currently have 3 iPads (2-kids, 1-dad) in the household and one iTunes account on a win computer. I previously had all iPads on single Apple ID/credit card and controlled the kids' downloads thru the Apple ID password that I kept secret. As the kids have grown older, I found myself constantly entering my password as the kids increased there interest in music/apps/video. I like this approach because all content was shared...I dislike because I was constantly asked to input password for all downloads.
So, I recently set up an individual account for them with the allowance feature at iTunes that allows them to download content on their own (I set restrictions on their iPads). Now I have 3 Apple IDs under one household.
My questions:
With the 3 Apple IDs, what is the best way to share apps,music, videos among myself and the kids? Is it multiple accounts on the computer and some sort of sharing?
Thanks in advance...

Hi Bonesaw1962,
We've had our staff and students run iOS updates OTA via Settings -> Software Update. In the past, we put a DNS block on Apple's update servers to prevent users from updating iOS (like last fall when iOS 7 was first released). By blocking mesu.apple com, the iPads weren't able to check for or install any iOS software updates. We waited until iOS 7.0.3 was released before we removed the block to mesu.apple.com at which point we told users if they wanted to update to iOS 7 they could do so OTA. We used our MDM to run reports periodically to see how many people updated to iOS 7 and how many stayed on iOS 6. As time went on, just about everyone updated on their own.
If you go this route (depending on the number of devices you have), you may want to take a look at Caching Server 2 to help with the network load https://www.apple.com/osx/server/features/#caching-server . From Apple's website, "When a user on your network downloads new software from Apple, a copy is automatically stored on your server. So the next time other users on your network update or download that same software, they actually access it from inside the network."
I wish there was a way for MDMs to manage iOS updates, but unfortunately Apple hasn't made this feature available to MDM providers. I've given this feedback to our Apple SE, but haven't heard if it is being considered or not. Keeping fingers crossed.
Hope this helps. Let us know what you decide on and keep us posted on the progress. Good luck!!
~Joe

Networking "best practice" for setting up a farm

Hi all.
We would like to set an OracleVM farm, and I have a question about "best practice" for
configuring the network. Some background:
- The hardware I have is comprised of machines with 4 gig-eth NICs each.
- The storage will be coming primarily from a backend NAS appliance (Netapp, FWIW).
- We have already allocated a separate VLAN for management.
- We would like to have HA capable VMs using OCFS2 (on top of NFS.)
I'm trying to decide between 2 possible configurations. The first would keep physical separation
between the mgt/storage networks and the DomU networks. The second would just trunk
everything together across all 4 NICs, something like:
Config 1:
- eth0 - management/cluster-interconnect
- eth1 - storage
- eth2/eth3 => bond0 - 8021q trunked, bonded interfaces for DomUs
Config 2:
- eth0/1/2/3 => bond0
Do people have experience or recommendation about the best configuration?
I'm attracted to the first option (perhaps naively) because CI/storage would benefit
from dedicated bandwidth and this configuration might also be more secure.
Regards,
Robert.

user1070509 wrote:
Option #4 (802.3ad) looks promising, but I don't know if this can be made to work across
separate switches.It can, if your switches support cross-switch trunking. Essentially, 802.3ad (also known as LACP or EtherChannel on Cisco devices) requires your switch to be properly configured to allow trunking across the interfaces used for the bond. I know that the high-end Cisco and Juniper switches do support LACP across multiple switches. In the Cisco world, this is called MEC (Multichassis EtherChannel).
If you're using low-end commodity-grade gear, you'll probably need to use active/passive bonds if you want to span switches. Alternatively, you could use one of the balance algorithms for some bandwitch increase. You'd have to run your own testing to determine which algorithm is best suited for your workload.
The Linux Foundation's Net:Bonding article has some great information on bonding in general, particularly on the various bonding methods for high availability:
http://www.linuxfoundation.org/en/Net:Bonding

Best practices for setting up projects

We recently adopted using Captivate for our WBT modules.
As a former Flash and Director user, I can say it’s
fast and does some great things. Doesn’t play so nice with
others on different occasions, but I’m learning. This forum
has been a great source for search and read on specific topics.
I’m trying to understand best practices for using this
product. We’ve had some problems with file size and
incorporating audio and video into our projects. Fortunately, the
forum has helped a lot with that. What I haven’t found a lot
of information on is good or better ways to set up individual
files, use multiple files and publish projects. We’ve decided
to go the route of putting standalones on our Intranet. My gut says
yuck, but for our situation I have yet to find a better way.
My question for discussion, then is: what are some best
practices for setting up individual files, using multiple files and
publishing projects? Any references or input on this would be
appreciated.

Hi,
Here are some of my suggestions:
1) Set up a style guide for all your standard slides. Eg.
Title slide, Index slide, chapter slide, end slide, screen capture,
non-screen capture, quizzes etc. This makes life a lot easier.
2) Create your own buttons and captions. The standard ones
are pretty ordinary, and it's hard to get a slick looking style
happening with the standard captions. They are pretty easy to
create (search for add print button to learn how to create
buttons). There should instructions on how to customise captions
somewhere on this forum. Customising means that you can also use
words, symbols, colours unique to your organisation.
3) Google elearning providers. Most use captivate and will
allow you to open samples or temporarily view selected modules.
This will give you great insight on what not to do and some good
ideas on what works well.
4) Timings: Using the above research, I got others to
complete the sample modules to get a feel for timings. The results
were clear, 10 mins good, 15 mins okay, 20 mins kind of okay, 30
mins bad, bad, bad. It's truly better to have a learner complete
2-3 short modules in 30 mins than one big monster. The other
benefit is that shorter files equal smaller size.
5) Narration: It's best to narrate each slide individually
(particularly for screen capture slides). You are more likely to
get it right on the first take, it's easier to edit and you don't
have to re-record the whole thing if you need to update it in
future. To get a slicker effect, use at least two voices: one male,
one female and use slightly different accents.
6) Screen capture slides: If you are recording filling out
long window based databse pages where the compulsory fields are
marked (eg. with a red asterisk) - you don't need to show how to
fill out every field. It's much easier for the learner (and you) to
show how to fill out the first few fields, then fade the screen
capture out, fade the end of the form in with the instructions on
what to do next. This will reduce your file size. In one of my
forms, this meant the removal of about 18 slides!
7) Auto captions: they are verbose (eg. 'Click on Print
Button' instead of 'Click Print'; 'Select the Print Preview item'
instead of 'Select Print Preview'). You have to edit them.
8) PC training syntax: Buttons and hyperlinks should normally
be 'click'; selections from drop down boxes or file lists are
normally 'select': Captivate sometimes mixes them up. Instructions
should always be written in the correct order: eg. Good: Click
'File', Select 'Print Preview'; Bad: Select 'Print Preview' from
the 'File Menu'. Button names, hyperlinks, selections are normally
written in bold
9) Instruction syntax: should always be written in an active
voice: eg. 'Click Options to open the printer menu' instead of
'When the Options button is clicked on, the printer menu will open'
10) Break all modules into chapters. Frame each chapter with
a chapter slide. It's also a good idea to show the Index page
before each chapter slide with a progress indicator (I use an
animated arrow to flash next to the name of the next chapter), I
use a start button rather a 'next' button for the start of each
chapter. You should always have a module overview with the purpose
of the course and a summary slide which states what was covered and
they have complete the module.
11) Put a transparent click button somewhere on each slide.
Set the properties of the click box to take the learner back to the
start of the current chapter by pressing F2. This allows them to
jump back to the start of their chapter at any time. You can also
do a similar thing on the index pages which jumps them to another
chapter.
12) Recording video capture: best to do it at normal speed
and be concious of where your mouse is. Minimise your clicks. Most
people (until they start working with captivate) are sloppy with
their mouse and you end up with lots of unnecessarily slides that
you have to delete out. The speed will default to how you recorded
it and this will reduce the amount of time you spend on changing
timings.
13) Captions: My rule of thumb is minimum of 4 seconds - and
longer depending on the amount of words. Eg. Click 'Print Preview'
is 4 seconds, a paragraph is longer. If you creating knowledge
based modules, make the timing long (eg. 2-3 minutes) and put in a
next button so that the learner can click when they are ready.
Also, narration means the slides will normally be slightly longer.
14) Be creative: Capitvate is desk bound. There are some
learners that just don't respond no matter how interactive
Captivate can be. Incorporate non-captivate and desk free
activities. Eg. As part of our OHS module, there is an activity
where the learner has to print off the floor plan, and then wander
around the floor marking on th emap key items such as: fire exits;
first aid kit, broom and mop cupboard, stationary cupboard, etc.
Good luck!

Best practice for external but secure access to internal data?

We need external customers/vendors/partners to access some of our company data (view/add/edit). It’s not so easy as to segment out those databases/tables/records from other existing (and put separate database(s) in the DMZ where our server is). Our
current solution is to have a 1433 hole from web server into our database server. The user credentials are not in any sort of web.config but rather compiled in our DLLs, and that SQL login has read/write access to a very limited number of databases.
Our security group says this is still not secure, but how else are we to do it? Even if a web service, there still has to be a hole in somewhere. Any standard best practice for this?
Thanks.

Security is mainly about mitigation rather than 100% secure, "We have unknown unknowns". The component needs to talk to SQL Server. You could continue to use http to talk to SQL Server, perhaps even get SOAP Transactions working but personally
I'd have more worries about using such a 'less trodden' path since that is exactly the areas where more security problems are discovered. I don't know about your specific design issues so there might be even more ways to mitigate the risk but in general you're
using a DMZ as a decent way to mitigate risk. I would recommend asking your security team what they'd deem acceptable.
http://pauliom.wordpress.com

Best Practice for FlexConnect Wireless roaming in MediaNet environment?

Hello!
Current Cisco best practice recommendations for enterprise MediaNet design, specify that VLANs be local to a switch / switch stack (i.e., to limit the scope of spanning-tree).
In the wireless world, this causes problems if you want users while roaming to keep real-time applications up and running. Every time they connect to a new AP on a different VLAN, then they will need to get a new IP address, which interrupts real-time apps.
So...best practice for LAN users causes real problems for wireless users.
I thought I'd post here in case there's a best practice for implementing wireless roaming in a routed environment that we might have missed so far!
We have a failover pair of FlexConnect 7510s, btw, configured for local switching for Internal users, and central switching with an anchor controller on the DMZ for Guest users.
Thanks,
Deb

Thanks for your replies, Stephen and JSnyder.
The situation here is that the original design engineer is no longer here, and the original design was not MediaNet-friendly, in that it had a very few /20 subnets bridged over entire large sites.
These several large sites (with a few hundred wireless users per site), are connected to an HQ location (where the 7510s in failover mode are installed) via 1G ethernet hand-offs (MPLS at the WAN provider). The 7510s are new, and are replacing older contollers at the HQ location.
The internal employee wireless users use resources both local to their site, as well as centralized resources. There are at least as many Guest wireless users per site as there are internal employee users, and the service to them consists of Internet traffic only. (When moved to the 7510s, their traffic will continue to be centrally switched and carried to an anchor controller in the DMZ.)
(1) So, going local mode seems impractical due to the sheer number of users whose traffic bound for their local site would be traversing the WAN twice. Too much bandwidth would be used. So, that implies the need to use Flex / HREAP mode instead.
(2) However, re-designing each site's IP environment for MediaNet would suggest to go routed to the closet. However, this breaks seamless roaming for users....
So, this conundrum is why I thought I'd post here, and see if there was some other cool / nifty solution I wasn't yet aware of.
The only other (possibly friendly to both needs) solution I'd thought of was to GRE tunnel a subnet from each closet to the collapsed Core / Disti switch at each site. Unfortunately, GRE tunnels are not supported in the rev of IOS on the present equipment, and so it isn't possible to try this idea.
Another "blue sky" idea I had (not for this customer, but possibly elsewhere in the future), is to use LAN switches such as 3850s that have WLC functionality built-in. I haven't yet worked with the WLC s/w available on those, but I was thinking it looks like they could be put into a mobility group, and L3 user roaming between them might then work. Do you happen to know if this might be a workable solution to the overall big-picture problem?
Thanks again for taking the time and trouble to reply!
Deb

Best practice for declaring and initializing String?

What is the best practice for the way Strings are declared in a class?
Should it be
private String strHello = "";
or should I have the initialization in the constructors?

The servlet constructor is usually called once, when the servlet is first accessed. But then again maybe something else happens, google servlet life cycle if you must know.
But let's take a step backwards here. It seems like you are trying to put fields into servlets. Don't do that. When two users fetch the servlet's URL at the same time, the fields are shared between the two hits. If you store something like HTTP parameters in the fields, the two hits' parameters will get mangled. The hits can end up seeing each other's parameter values.
The best way is not to have fields in servlets. (Except maybe "static final" constants, sometimes rarely something else.) Many concurrency worries go away, servlet life cycle worries go away, servlet constructors go away, init() usually goes away.

Best Practice for a Print Server

What is the best practice for having a print server serving over 25 printers 10 of which are colour lasers and the rest black and white lasers.
Hardware
At the moment we have one server 2Ghz Dual G5 with 4GB Ram and xserve RAID. The server is also our main Open directory server, with about 400+ clients.
I want to order a new server and want to know the best type of setup for the optimal print server.
Thanks

Since print servers need RAM and spool space, but not a lot of processing power, I'd go with a Mac Mini packed with ram and the biggest HD you can get into it. Then load a copy of Xserver Tiger on it and configure your print server there.
Another option, if you don't mind used equipment, is to pick up an old G4 or G5 Xserve, load it up with RAM and disk space, and put tiger on that.
Good luck!
-Gregg

Best practice for Wireless ap vlan

Is there a best practice for grouping lightweight access points in one vlan or allowing them to be spread across several ??

Whether you have multiple sites or not, it's good practice to put your APs in a separate and dedicated VLAN.
If your sites are routed sites, then you can re-use the same VLAN numbers but make sure they are on separate subnets and/or VRF instance.

Best Practice for link to WebdynPro page in welcome page

Hi Experts,
I am new in SAP Portal. I need some guidance from you guys. I have a requirement to create welcome page which is JSP and has a link to a WebdynPro page. I have to put the url in JSP file. So i do not know what kind of URL i should put in the JSP.
The problem is if i put the url which i can see in the address bar like 'http://DevServer/WebDynPro/ApplcationA', when i transport it to another server ,for example Production,. The real url might be change to 'http://ProdServer/WebDynPro/ApplcationA'. It may cause the link in JSP can not be worked.
I would like to ask you the best practice for this case. What url? What configuration?
Thank you in advance,
Noppong Jinbunluphol
P.S. For the JSP, i create it in portal application dc.

Dear Noppong,
You can do it with multiple ways like :-
1. Get the current host name and make complete URL with using host name for the webdynpro iview.
request = (IPortalComponentRequest) this.getRequest();
HttpServletRequest req = request.getServletRequest();
StringBuffer strURL = req.getRequestURL();
2. Create the KM Document or Link for webdynpro Iview OR Create the WPC Web Page for the webdynpro ivew
Refer to [http://help.sap.com/saphelp_nw70/helpdata/en/06/4776399abf4b73945acb8fb4f41473/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/06/4776399abf4b73945acb8fb4f41473/frameset.htm]
[http://help.sap.com/saphelp_nw70/helpdata/en/06/4776399abf4b73945acb8fb4f41473/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/06/4776399abf4b73945acb8fb4f41473/frameset.htm]
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ff/681a4138a147cbabc3c76bde4dcdbd/content.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ff/681a4138a147cbabc3c76bde4dcdbd/content.htm]
Hope it will helps
Best Regards
Arun Jaiswal

Best practice for putting together scenes in a Flash project?

Similar Messages

Maybe you are looking for