Best Practices CS6 - Multicam Edit: How to use a key?

I'm trying to figure out what's the best way to use the Multi-cam editing function of CS6 PP, while applying a key to the primary video track.
The workflow I have is V1 contains the background that I want to key into V2. I applied UltraKey to V2, did the key (works great), and now I want to use the multicam editing to cut between the finished keyed V2 track, and video on V3. The way I've always used the Multicam editing in the past is to select the video clips from the clip browser (not the timeline) to create a multicam source sequence - but if I have to apply a key first, I can't do that. I thought of nesting V1 and V2 together after the key is applied, but then I can't make adjustments to the key after the final composite is made (or can I?)
Any thoughts about what works best in this scenario? appreciate the help.

I don't think my system could support live keying. I'd prefer to apply the key first but this is where I had a problem. Let's assume for a minute that there's no key. In a typical MCS workflow, I'd just select the clips from the browser, create the MCS, do the live cuts and be done with it. If I can still do that it's fine, but would that screw everything up in the MCS if I move all the video up one track because the background for the key has to be in front of the video that it's being applied to? I hope I'm making sense here.

Similar Messages

Premiere pro cs6 multicam editing

hI all!
How can I do a Premiere Pro cs6 multicam editing when there is a "audio only" clip too? for exemple when there is an external service audio recording?
Selecting the clips and right clic the create source multi-camera menù command is deactivated, and this option is not available; why doesn't it work?
thank you all.
Luigi

You can always do things the original (and often better) way.
Manually.

Best practice to monitor 10gR3 OSB performance using JMX API?

Hi guys,
I need some advice on the best practice to monitor 10gR3 OSB performance using JMX API.
Jus to show I have done my home work, I managed to get the JMX sample code from
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/jmx_monitoring/example.html#wp1109828
working.
The following is the list of options I am think about:
* Set up: I have a cluster of one 1 admin server with 2 managed servers, which managed server runs an instance of OSB
* What I try to achieve:
- use JMX API to collect OSB stats data periodically as in sample code above then save data as a record to a
     database table
Options/ideas:
1. Simplest approach: Run the modified version of JMX sample on the Admin Server to save stats data to database
regularly. I can't see problems with this one ...
2. Use WLI to schedule the Task of collecting stats data regularly. May be overkill if option 1 above is good for production
3. Deploy a simple web app on Admin Server, say a simple servlet that displays a simple page to start/stop and configure
data collection interval for the timer
What approach would you experts recommend?
BTW, the caveats os using JMX in http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/jmx_monitoring/concepts.html#wp1095673
says
     Oracle strongly discourages using this API in a concurrent manner with more than one thread or process. This is because a reset performed in
     one thread or process is not visible to another threads or processes. This caveat also applies to resets performed from the Monitoring Dashboard of
     the Oracle Service Bus Console, as such resets are not visible to this API.
Under what scenario would I be breaking this rule? I am a little worried about its statement
     discourages using this API in a concurrent manner with more than one thread or process
Thanks in advance,
Sam

Hi Manoj,
Thanks for getting back. I am afraid configuring aggregation interval from Dashboard doesn't solve problem as I need to collect stats data of endpoint URI or in hourly or daily basis, then output to CSV files so line graphs can be drawn for chosen applications.
Just for those who may be interested. It's not possible to use SQL to query database tables to extract OSB stats for a specified time period, say 9am - 5pm. I raised a support case already and the response I got back is 'No'.
That means using JMX API will be the way to go :)
Has anyone actually done this kind of OSB stats report and care to give some pointers?
I am thinking of using 7 or 1 days as the aggregation interval set in Dashboard of OSB admin console then collects stats data using JMX(as described in previous link) hourly using WebLogic Server JMX Timer Service as described in
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/jmxinst/timer.html instead of Java's Timer class.
Not sure if this is the best practice.
Thanks,
Regards,
Sam

How to use a key file in the FTP Task using and SSL connection

In the past I have used this code to set the FTP pass word in an FTP component task in SSIS.
Does anyone know how to use a Key file in an SSL connection to download a file from an FTP site? If not can you tell me where I can get the C# code examples to learn how to create a script task or if there is another way in SSIS to download large files
from an SSL FTP site? Thank you for any help offered.
public void Main()
ConnectionManager FTPConn;
FTPConn = Dts.Connections["FTPServer"];
FTPConn.Properties["ServerPassword"].SetValue(FTPConn, Dts.Variables["FTPPassword"].Value);
Dts.TaskResult = (int)ScriptResults.Success;
Antonio

You can use SFTP for this.
This is a way of implementing SFTP in SSIS using standard tasks
http://visakhm.blogspot.in/2012/12/implementing-dynamic-secure-ftp-process.html
also see
http://blog.goanywheremft.com/2011/10/20/sftp-ftps-secure-ftp-transfers/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How we use Surrogate Keys for snowflake dimension

Hi All,
my question is - How we use Surrogate Keys for snowflake dimension
i heard from some body Surrogate Keys only work with star schema.
please correct me if i wrong.
Regards,
Manish

Hi manishcal16PPS,
According to your description, you can only create natural key in your dimension. But it's not working when using surrogate key. Right?
In Analysis Services, the snowflake schema of the dimensions are represented by more than one dimension table in other words its takes multiple dimension tables to define a dimension. Surrogate key are just some extra, redundant, unique key based on the
natural key. So there's no direct relationship or some limitations between surrogate keys and snowflake schema.
In this scenario, since there's relationship between the two dimensions, you should create natural key. For using natural key or surrogate key. Please refer to an article below:
Surrogate Key vs. Natural Key
For understanding star/snowflake schema, please see:
Understanding Star and Snowflake Schemas
Regards,
Simon Hou
TechNet Community Support

How to Use "Hot Key" in the Search help

Hi,
Please explain how to use hot key with some example.

TYPE-POOLS SLIS. DATA: BEGIN OF itab OCCURS 0,
        BUKRS LIKE T001-BUKRS,
        BUTXT LIKE T001-BUTXT,
      END   OF itab.
PARAMETERS: P_BUKRS TYPE BUKRS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_BUKRS.
PERFORM F4_FOR_BUKRS.
FORM F4_FOR_BUKRS.   DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
        ES_SELFIELD TYPE SLIS_SELFIELD. * Get data
SELECT BUKRS
         BUTXT
         FROM T001
         INTO TABLE itab
         up to 10 rows .
Get field
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME     = SY-REPID
            I_INTERNAL_TABNAME = 'ITAB'
       CHANGING
            CT_FIELDCAT        = IT_FIELDCAT[].   LOOP AT IT_FIELDCAT.
    IT_FIELDCAT-KEY = SPACE.
    IF IT_FIELDCAT-FIELDNAME = 'BUTXT'.
      IT_FIELDCAT-EMPHASIZE = 'C710'.
      IT_FIELDCAT-HOTSPOT = X.
    ENDIF.
    IF IT_FIELDCAT-FIELDNAME = 'BUKRS'.
      IT_FIELDCAT-EMPHASIZE = 'C610'.
    ENDIF.     MODIFY IT_FIELDCAT.
ENDLOOP.   CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
    EXPORTING
I_TITLE                       = 'THIS IS FOR F4 IN COLOR'
      I_TABNAME                     = 'ITAB'
      IT_FIELDCAT                   = IT_FIELDCAT[]
    IMPORTING
      ES_SELFIELD                   = ES_SELFIELD
    TABLES
      T_OUTTAB                      = ITAB . ENDFORM.                    " F4_FOR_BUKRS

Documentation How to use Virtual Key fig.

Hi all ,
Can u please send me Documentation How to use Virtual Key fig. to [email protected]
Nice weekend.

check this doc to get a headsup on Virtual objects - though the doc talks abt the virtual char, the procedure is pretty much similar to KF too.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20use%20variable%20time%20references%20in%20currency%20conversion
How to implement Virtual Characteristics or Virtual key figures

Best practice when developing APEX apps and using a SVN repository

Hi experts,
I wanted to get your opinion on best practice regarding how to use SVN and APEX combined.
The idea is basically how to structure and how to save APEX apps the best way in a repository.
I am currently working with a custom SVN structure, not using the default TRUNC/TAGS one : every app has a folder , under every app folder i have PAge number folders, and for each page reports, regions and global objects separated.
This helps me because its more readable then saving the whole page export, its good for small changes and i have a clear overview of every bit and piece.
What is everybody else using or is there a best practice to follow here that i dont know?
Kind regards,
Alex

@tomaugerdotcom
Something like this might help: https://testflightapp.com/
Concevably, you could roll your own internal service if that particular one doesn't suit you. (I don't have any knowledge about how they are doing it, but it shouldn't be hard to figure out since Apple's constraining rules would only allow a few possibilities.)
USB app install and debugging isn't supported on iOS. You have to use wireless.
Another option specifically for multi-touch dev/testing, is to use an Android device.

Best Practices for image layout and positioning using anchored frames in Framemaker 10

Hi,
I'm looking for the best practices in how to layout my images in Framemaker 10 so that they translate correctly to Robohelp 9. I currently have images inside of Anchored frames that "Run into" the right side of my text. I've adjusted the size of the anchored frame so that my text flows correctly around the image. Everything looks good in Framemaker! Yeah! The problem is that when I link my Framemaker document to Robohelp, the text does not flow around my image in the same manner. On a couple of Robohelp screens the image is running into the footer. I'm wondering if I should be using tables in Framemaker in order to get the page layout that I'm looking for. Also, I went back and forth...is this a Framemaker question or is this a Robohelp question. Any assistance would be greatly appreciated.

I wish I could offer some advice, rather than simply adding to your question. I think there is something odd that happens with anchored frames.
I have been going through fits trying to figure out why the placement of my graphics shifts when I run them through Frame 10-to-RoboHelp 9 conversion. The placement in our books is flush left to the body text area. However, when they convert, some are flush left, some are centered, and a very few are flush right. My boss is very unhappy with me, as I have been unable to figure out why this is happening. I didn't create these files, so I don't know if it's something that goes back to how the graphics were initially imported. But I can't figure out why everything looks right in Framemaker, with the frame attached to an anchor tag, etc. but the placement goes hinky when they convert.
Any insights are appreciated. I'm wondering if it's going to come down to deleting them and recreating the graphic frame.

Best practice: interface for editing documents

Hello
I use IDeveloper 11g 11.1.1.3.0, ADF Faces
I have got a task to create a web interface for editing documents.
Every document have a head and a specification.
Head have a lot of field, and every row in a specification have a lot of fields also.
There are few PL/SQL procedures I need call to save document in the database, and I need to call them in the single transaction for it.
So, I need to fill up all document and only after that save it to the database.
For fill up some of fields I need to use component like List of Values (with autoSuggestBehavior and with selecting value from the list).
There is next question: what is the best practice to develop interface like this?
I had some troubles when I tried to use ADF BC.
May be, there are tutorials?
Will be very thankful for any advices or links.
Anatolii

Hello
I use IDeveloper 11g 11.1.1.3.0, ADF Faces
I have got a task to create a web interface for editing documents.
Every document have a head and a specification.
Head have a lot of field, and every row in a specification have a lot of fields also.
There are few PL/SQL procedures I need call to save document in the database, and I need to call them in the single transaction for it.
So, I need to fill up all document and only after that save it to the database.
For fill up some of fields I need to use component like List of Values (with autoSuggestBehavior and with selecting value from the list).
There is next question: what is the best practice to develop interface like this?
I had some troubles when I tried to use ADF BC.
May be, there are tutorials?
Will be very thankful for any advices or links.
Anatolii

Best practice - which server OS should I use for Exchange 2010 install

We currently have 2 exchange 2007 boxes running Server 2003. the plan is to upgrade to exchange 2010 (I'd prefer 2013 but the powers that be want 2010), and I have been asked to follow Microsoft best practice. The problem is I can't find anything to point
me in the direction of the recommended server OS, I can find ones it will work on but nothing to say Microsoft recommend this...
We have licenses for Server 2008, 2008 R2 and 2012 available, which one should I advise is the Microsoft recommendation?

Thanks Andy,
So is there no actual best practice recommendation for a server OS to run Exchange 2010 on? I agree that 2012 would be the one to go for, but the people making the decision on how we do this want reasons, and as they don't really have a lot of technical
understanding I need to be able to go to them with "Use Server 20xx because it's Microsoft best practice".
If there isn't a best practice recommendation I will try the longer support life and more options for high availability with 2012.
Well, you probably wont find a "best practice" as much as a "its supported" stance from Micorosoft.
As in all these things, there may be other reasons a business chooses to use 2008 over 2012 etc...
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

CS6 Multicam Edit - Is there a way to turn off some camera angles when the system gets strained?

I'm doing a multicam edit in cs6 and the 5 camera angles I have are straining my system. I have two main angles and three kind of back up go pro angles that I don't need most of the time. But I don't want to get rid of them either. Is there a way to turn off monitoring some of the angles at times so that video will playback smoother? Then when I need the other angles, switch them back on when I want? The video is so choppy with all 5 angles monitoring at once that multicam editing is basically impossible. I'm editing on what's supposed to be a very fast system at work but it's not fast enough...Thanks!

I'm not aware of any way to do this. You might want to invest in a battery case if this is a problem for you; our users here all have them.
Please submit your feature request to Apple at this link: http://www.apple.com/feedback; I agree it's a good idea.

Best practice about dial-peer creating when using analog lines

Hi,
I am trying to find out what is the best practice when creating dial-peer for analog lines on CME, should I use trunk group or create separate dial-peer for each FXO ports? If I use trunk group, is there any advantage ( lesser dial-peer) or disadvantage?
Thanks!

The advantage of trunk groups is that a single dial peer can point to for instance PSTN, rather then multiple dialpeers, with varying preference, each pointing to a separate FXO. Funtionally I can't see much difference. So I guess it also comes down to personal preference.
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================

I want to confirm a best practices issue - Acrobat XI Standard Forms used on an Apple OS - is this an issue?

I am creating forms in Acrobat XI Standard on a Windows 7 64 Bit machine. I am reports that the forms do not work and I am seeing screen prints where the fonts in the form fields are larger and displaced than those in the original form I created. This is happening on an Apple product. So is this an issue? I read a post from 2007 saying that it was. But is it still today and if so, is there a way to deliver a form that works in Windows and in Apple while using Acrobat XI?
Thanks

The issue is not just Mac Preview. You must, as a form creator, be aware that anyone getting a computer or tablet today will have a PDF reader, or several, and not Adobe Reader. Not unless they choose to get it, and you would need to give them a compelling reason to both install and work out how to use it. Readers people will have include
* Mac OS Preview (command and used in Safari browser)
* Windows Reader (with Windows 8)
* Chrome, Firefox (browsers with built in PDF viewers)
* iOS (iPad, iPhone) built in PDF (also Adobe Reader, while available, is very limited)
* Android (tablet, phone) built in PDF (also Adobe Reader, while available, is very limited)
* ChromeBook - built in PDF, no Adobe Reader app.
The hardest part is not geting people to install Adobe Reader, but to understand that, even if they have done so, that their browser probably doesn't use it.
Some PDF viewers ignore forms, some have limited forms support. The worst common one is Preview, as it appears to have form functionality, but it makes broken forms. Apple have no interest in fixing.

How about use partial key to loop at a hashed table?

Such as I want to loop a Internal table of BSID according to BKPF.
data itab_bsid type hashed table of BSID with unique key bukrs belnr gjahr buzid.
Loop at itab_bsid where bukrs = wa_bkpf-bukrs
and belnr = wa_bkpf-belnr
and gjahr = wa_bkpf-gjahr.
endloop.
I know if you use all key to access this hashed table ,it is certainly quick, and my question is when i use partial key of this internal hashed table to loop it, how about its performance.
Another question is in this case(BSID have many many record) , Sorted table and Hashed table , Which is better in performance.

You can't cast b/w data reference which l_tax is and object reference which l_o_tax_code is.
osref is a generic object type and you store a reference to some object in it, right? So the question is: what kind of object you store there? Please note - this must be an object reference , not data reference .
i.e
"here goes some class
class zcl_spfli definition.
endclass.
class zcl_spfli implementation.
endclass.
"here is an OBJECT REFERENCE for it, (so I refer to a class) i.e persistent object to table SPFLI
data oref_spfli type ref to zcl_spfli.
"but here I have a DATA REFERENCE (so I refer to some data object) i.e DDIC structure SPFLI
data dref_spfli type ref to spfli.
So my OSREF can hold only oref_spfli but it not intended for dref_spfli . That's why you get this syntax error. Once you have stored reference to zcl_spfli in osref then you will be able to dereference it and access this object's attributes.
data: osref type osref.
create object osref_spfli.
osref = osref_spfli.
"now osref holds reference to object, you can deference it
oref_spfli ?= osref.
osref_spfli->some_attribute = ....
OSREFTAB is just a table whose line is of type OSREF (so can hold multiple object references - one in each line).
Regards
Marcin

Best Practices CS6 - Multicam Edit: How to use a key?

Similar Messages

Maybe you are looking for