Best practise for pausing slide during flash video playback

Hi all,
There really should be a simple option for this - apologies if there is, but I am struggling to find it!
I have some videos as part of my presentation, that I DO NOT want the user to skip! I am trying to implement a "Continue to next slide" button that only appears once the video is complete. I have experimented with several things. Most recently, setting the button to appear at the time in the slide when the video completes, which is OK, unless the user pauses the video :-). Then of course, the slide continues playing and the button appears!!
Is there an easier work around? I have also tried placing the FLV in an animation and programming the continue buttons manually, so that they only appear at the end of the video, this works to an extent, but not really what I am looking for as I feel it should be possible to do this without using an animation!
Im sure someone here has come accross this problem. I just wish there was a simple option to display button upon movie complete!!!!
Thanks,
Tristan

Checking Console.app messages once again, the following lines seem to coincide with at least some of the stalling incidents:
===
2013/03/05 1:32:33.231 am Finder[595]: PlotISImageRef 0x29f50026 InContext 0x7f986b3c1340 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:32:34.499 am Dock[590]: no information back from LS about running process
2013/03/05 1:34:58.597 am Safari[8023]: PlotISImageRef 0x20990018 InContext 0x7ffb9b9d6ea0 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:35:00.853 am Dock[590]: no information back from LS about running process
2013/03/05 1:35:39.917 am TextEdit[8026]: PlotISImageRef 0x25910017 InContext 0x7f8873a45940 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:35:41.186 am Dock[590]: no information back from LS about running process
2013/03/05 1:42:14.318 am Finder[595]: PlotISImageRef 0x29f50026 InContext 0x7f986c064400 in {33.000000,514.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:42:15.986 am Dock[590]: no information back from LS about running process
===
Any significance to this? Thanks for any help.
- Gord

Similar Messages

Best practises for replication

Hi,
I want to know what is best practise for duration of replicaation of database between two Cisco ACS.
Regards,
Atif.

Hi Atif,
The replication time interval should always be higher.
Reason: Everytime you replicate the data it requires ACS services to restart so doing this frequently may affect your production enviroment.
However, if you want to replicate internal user's password then there is an option to replicate password changes right awayvwithout a full replication. You can enable this option under System Configuration -> Local Password Management. With this enabled you could potentially set the replications to a larger interval.
It also depend how often you do changes in your ACS. If its normal then I would say set it to every sunday 12:00 PM.
This is how replication happens:
The primary ACS stops its authentication and creates a copy of the ACSinternal database components that it is configured to replicate. During this
step, if AAA clients are configured properly, those that usually use the primary ACS fail over to another ACS. The primary ACS resumes its authentication service.
After the preceding events on the primary ACS, the database replication process continues on the secondary ACS. The secondary ACS stops its authentication service and replaces its database components with the database components that it received from the primary ACS. During this step, if AAA clients are configured properly, those that usually use the secondary ACS fail over to another ACS. The secondary ACS resumes its authentication service.
HTH
Regards,
JK
Plz rate helpful posts-

Pause key during recording Video demo not work

Hello everybody, I dont know why, but Pause key during recording Video demo project not work. I tried all others keys what I see in the Preferences dialog box and all works corectly, only Pause key not. Can somebody help me? Win 7, Captivate 6.
Yarik

Hi there and thank you for reaching Adobe Community.
Unfortunately, this feature is not there in Captivate 6 Video demo.
Thanks!

What is the best practise for setting dirty flag of a page/view?

For a page/view, normaylly there are 2 things to do for diry data:
1. when it's clean, Save button is disabled, when it's dirty, save button is enabled.
2. when it's dirty and the window is closed, a popup says "you have unsaved data, close will lose the data".
My thought is: it must be handled at client side, because not all valuechange is auto submitted. E.g., you type the 1st letter of a string in a input box, the server side does not know it, but save button should be enabled immediately.
Is it possible to capture all valueChange events in a page or a view at client side?
I'm not sure what is the best practise for setting dirty flag? If there is better solution? Does ADF provide facility for this?

public void save(ActionEvent event){
boolean formValid = isFormValid();
   if (formValid) {
save button is enabled.
    private boolean isFormValid() {
        boolean valid = true;
        if (Check Condition 1) {
            valid = false;
           showErrorMessage1();
        if (Check Condition 2) {
            valid = false;
           showErrorMessage1();
        return valid;
    private void showErrorMessage1() {
                when it's dirty and the window is closed, a popup says "you have unsaved data, close will lose the data".

Best Practise for connecting to Ethernet based device

Hi,
I have inherited a system where we have a cDAQ-9181 controlling an vehicle access barrier, with a LabView application on a PC talking to it via Ethernet.
(The application is very simple - press a button > send a value to the 9181 unit > opens the barrier )
All works fine most of the time.
( We occasionally get network related errors. The LabView application sometimes thinks another PC has reserved the unit, or gives “error 89130 - device not available for routing” )
The users would now like to be able to easily run the application from a second PC ( not at the same time ), but this seems to be a problem. If I exit the application on PC “A” and run it on PC “B” it struggles to reserve the chassis, and throws the “89130” error and I have to restart the unit via MAC.
While I’m a “veteran” control programmer, I’m new to LabView, and would be very grateful for any pointers on “best practise” for talking to devices via Ethernet, or any specific suggestions for handling multiple PCs talking to a single device.
Thank You.
Tim.

Hi Tim,
Thank you for your post and welcome to the NI forums.
There are lots of knowledgebase articles on our website and you should be able to find documentation for most of our hardware.
There is a good troubleshooting guide for cDAQ Ethernet here (http://ae.natinst.com/public.nsf/web/searchinternal/e67b4e4749f378ff862577270059bd4b?OpenDocument) - it outlines the steps to take to ensure you have a stable a connection as possible. You may have already seen it, but the quick-start guide for your specific device may also be worth consulting for best practices. Are these helpful?
As for using more than one PC - this shouldn't be too much of an issue. I would expect that the resource isn't being closed correctly - when you exit the App on PC 'A', how are you closing off the resource?
Best regards,
Eden S
Applications Engineer
National Instruments UK & Ireland

Best Practise for rebooting ISE Nodes?

Hello Community,
I administer an ISE installation with two nodes (I am not an ISE Specialist, my job is just to manage the user/mac-adresses... but now I have to move my ISE Nodes from one VMWare Cluster to another VMWare Cluster.
(Both VMWare environments are connected to our enterprise network, but are different environments. vMotion not possible)
I would shutdown ISE02, move it to our new VMWare environment and start it again.
Than I would do this with our ISE01 Node...
Are there any best practises for doing this? (Shutdown application first, stopl replikation etc)?
Can I really simply reboot an ISE Node - or have I consider something bevor I doing this? After I doing this?
Any tasks after reboot?
Thank you for any answer!
ISE01
Administration, Monitoring, Policy Service
PRI(A), SEC(M)
ISE02
Administration, Monitoring, Policy Service
SEC(A), PRI(M)

There is a lot to consider here. If changing environments means changing IP Address and IP Scopes, then your policies, profiles, and dACLs would also have to change among other things. If this is the case, create a new ISE VM in the new environment using the built in evaluation license and recreate the deployment from the old environment using the addressing scheme of the new environment. Then spin-up a new Secondary node and register it on the Primary. Once this is done, you can re-host the license from your old environment onto your new environment. You can use this tool to re-host:
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=3999
If IP Addressing is to remain the same, it gets simpler.
First, and always, perform a configuration and operational backup.
If downtime is not an issue, or if you have a maintenance window of an hour or so: Simply shut down both nodes. Transfer them to the New Environment and turn them on, Primary Node first, of course.
If downtime is an issue, shut down the Secondary Node and transfer it to the New Environment. Start the Secondary Node and when it is up, shut down the Primary Node. Once services on the primary node have stopped, promote the Secondary Node to Primary Node.
Transfer the OLD Primary Node to the New Environment and turn it on. It should assume the role of Secondary Node. If it does not, assign that role through the GUI.
Remember, the correct way to shut down an ISE node is:
application stop ise
halt
By using these commands, the risk of database corruption decreases by about 90% (Remember to always backup).
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

SAP Best Practises for Logistic Modules

Dear Reader,
Does anyone know how to find SAP Best Practises for Netweaver 2004s Logistic scenarios (SD, MM,)
The old Netwvr 2004 scenarioas are less helpful, especially in Inventory mgmt.
Thanks

Check this link, this is the latest I guess.
[SAP Best Practices|http://help.sap.com/bp_bw370/html/index.htm]
Cheers,
Neel.

Best Practises for doing Master Scheduling using SNP

Hello Gurus ,
Can you please suggest the best practises for doing Master Scheduling using SNP . Which engine to use , what would that mean etc
Regards,
Nick

APC Back-UPS XS 1300. $169.99 at Best Buy.
Our power outages here are usually only a few seconds; this should give my server about 20 or 25 minutes run-time.
I'm setting up the PowerChute software now to shut down the computer when 5 minutes of power is left. The load with the monitor sleeping is 171 watts.
This has surge protection and other nice features as well.
-Noel

ECC 6.0 upgrade to Best practise for chemical industry implementation

Dear All.,
Please tell me what all the EHP3 must be updated in the SAP erp ecc 6.0. I have already updated
SAP_APPL 60304.
Tell me what is the next Ehp3 required before i start best practise in saint.
Thanks & Regards,
Manju

Dear sir.,
I have installed SAP ECC 6.0 for a chemical industry, now am planning to implement Best practise to reduce implementation time.
1) As per the SAP Quick quide i have downloaded best practise for chemical industry(IS) and implemented through SAINT, and the prerequisites were maintained as per the SAP notes 774615,1301301,1064635,
2)The above mentioned notes explains minimum stack11 and sapka=18,sapkb=18,sapbw=20,PI_Basis-2005_1_700=20 and sap_ap=15 to update Ehp3 for SAP_APPL603.
3) After updating all the above mentioned patch level i implemented the Best practise in saint and that was successful.
But still the problem persist in activation of BP by tcode /n/smb/bbi only 70% has been completed and activation stoped with *ABAP program error ASSIGNSUBSTRING_NOT_ALLOWED and relevent note is 1295083*_
Please any one tell me, is that required to update all the EHP3 components since i have maintained only SAP_APPL60304.
What all Ehp3 components should be updated to get a smooth activation og BP for chemical industry.

Can you skip a slide during a video?

I work in radio sales and I am putting together a presentation that has music videos imbedded in it. After the video is over, the slide automatically advances to the next one. I want to be able to advance to the next slide during a video in case my client is in a hurry or has no interest in watching the video. I've tried using the keyboard shortcut [shift-down arrow] to advance the slide and skip the rest of the video while it's playing, but that doesn't work. Does anybody know if there is there a way to do this?

Only as a movie file.
Select Album. File > New Slideshow
Select Export on the bottom
Select a size and export.

Wats the best practise for performance

Hi all,
In my out line i have 15 dimensions and for one dimension i have 39000 members so wat is the best practise for performance , If we have more dimensions and more meebers is there any problem for performance
so wat is the best practise for dimensions and members??
Thanks in advance??

If it is ASO application it is not a problem.
If it is a BSO application surely it will hit the performance.
More dimensions will create performance issues.
If the said 39000 members dimension is a Flat dimension. It will be another issue.
If BSO is obvious try to split into two models.
Create intermediate groupings for the Filat dimension.

How to install Best Practise for HCM

Hi all:
Could you please tell me how to install best practise for HCM , as there is no autoran file.
Thank you very much!!!
Best regards
Frank

Hi,
Did you chk this link;
http://help.sap.com/content/bestpractices/overview/index.htm
http://help.sap.com/bp_hcmv1600/HCM_US/HTML/index.htm
Regards
CSM Reddy

Flash video playback suddenly lagging???

For some reason my flash video on Youtube won't play w/o lagging. The default resolution goes to 144p even, I've no connection problems(150mbps down/30 up, wireless AC TC wired to cable modem). I've emptied all caches in Safari and the Flash settings under system preferences, and I've restarted the computer. Latest version of Flash and Mavericks, extensions are off. The progress bar in the Youtube screen even resets back to the beginning after starting sometimes. It looks like I'm on dial up or something. Speedtests are perfect btw...

I'm writing this follow-up so that if anyone else runs into this issue, they might have a solution to fix it.
The infinite buffer hang was an issue that happened across my network, no matter what Mac device was being used and I was able to duplicate it on a number of machines manufactured between 2010 and late 2013, They were also running various opperating systems from snow leopard to lion to mavericks. All flash updates were the most recent.
Given that the only new change was a network upgrade, all signs pointed to this. After examining the network config using airport utilities, I discovered a double NAT error (that airport was currently ignoring). The cable router and airport router were both trying to establish a 192.x.x.x IP. I got my cable provider to config their router so it worked as just a modem and not a router and the Flash hang problem went away.

Problems with Flash video playback

I'm having a problem with Flash video playback, hoping
someone here can help.
I have several movies which I have converted to .flv using
the Flash authoring tool. I have then created an .swf for each
movie, embedding the .flv along with the playback component,
playback controls, etc.
I can open these .swfs using Flash Player and everything
displays and plays as expected. However, when I embed the .swf into
a web page and open it using a browser, the playback controls don't
show up, and the movie will only play if it has been encoded to
autoplay. I am on an Intel Mac, using the latest Flash Player
plug-in, and am having this problem in both Firefox 2.0.0.11 and in
Safari 2.0.4.
I'm guessing that the problem lies in how I have encoded the
.swfs into the web page? Hoping someone has a solution, or at least
a good suggestion!
thanks,
- sounddevisor

Yes, that is exactly what I needed. Thanks!
Just to clarify for anyone else who stumbles across this -
the extra .swf files (which contain the skin for the player) need
to be in the same directory as the .html doc which is displaying
the video .swf. Hope that helps someone else!

Resizeable flash video playback

How do you make a resizeable flash video playback? Is there a
control for that?

I'm writing this follow-up so that if anyone else runs into this issue, they might have a solution to fix it.
The infinite buffer hang was an issue that happened across my network, no matter what Mac device was being used and I was able to duplicate it on a number of machines manufactured between 2010 and late 2013, They were also running various opperating systems from snow leopard to lion to mavericks. All flash updates were the most recent.
Given that the only new change was a network upgrade, all signs pointed to this. After examining the network config using airport utilities, I discovered a double NAT error (that airport was currently ignoring). The cable router and airport router were both trying to establish a 192.x.x.x IP. I got my cable provider to config their router so it worked as just a modem and not a router and the Flash hang problem went away.

Best practise for pausing slide during flash video playback

Similar Messages

Maybe you are looking for